Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3
Internet Protocol (IP) Messages
Downloads: This chapterpdf (PDF - 147.0KB) The complete bookPDF (PDF - 2.03MB) | Feedback

Internet Protocol (IP) Messages

Table Of Contents

Internet Protocol (IP) Messages

PLATFORM_IPV4 Messages

PRRT Messages


Internet Protocol (IP) Messages


This section contains all Internet Protocol related System Error Messages. The following facility codes are represented in this module:

PLATFORM_IPV4 Messages

PRRT Messages

PLATFORM_IPV4 Messages

Error Message     
 
    
    
   

%IP-PLATFORM_IPV4-1-DLERR [chars] : [chars]

Explanation    Error finding well-known function in dll.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

PRRT Messages

Error Message     
 
    
    
   

%IP-PRRT-3-ERR_CHUNK_CREATE Fatal Error: couldn't allocate chunk mem for packet queue

Explanation    couldn't allocate chunk mem for packet queue

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%IP-PRRT-3-ERR_CONN Fatal Error: Couldn't create [chars] for [chars] interaction

Explanation    A certain call to an event_conn_*() function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%IP-PRRT-3-ERR_EVM Fatal Error: [chars] for [chars], error = [dec]

Explanation    event api failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%IP-PRRT-3-ERR_INIT [chars]

Explanation    An Init called failed, exiting.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%IP-PRRT-3-ERR_PTHREAD_CREATE [chars], ([dec], [chars])

Explanation    pthread create failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%IP-PRRT-3-ERR_TIMER Fatal Error: [chars] for [chars], error = [dec]

Explanation    timert api failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%IP-PRRT-6-ERR_NETIO_CONNECT Failed to initialize handler for netio connection [chars] ([chars])

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.