Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.3
System Database Messages
Downloads: This chapterpdf (PDF - 281.0KB) The complete bookPDF (PDF - 7.09MB) | Feedback

System Database Messages

Table Of Contents

System Database Messages

BACKEND Messages

BACKUPDB Messages

LIBSYSDB Messages

SMC Messages

SMS Messages

SYSDB Messages

SYSDBHELPER Messages

SYSDBUTILS Messages


System Database Messages


This section contains all system database related System Error Messages. The following facility codes are represented in this module:

BACKEND Messages

BACKUPDB Messages

LIBSYSDB Messages

SMC Messages

SMS Messages

SYSDB Messages

SYSDBHELPER Messages

SYSDBUTILS Messages

BACKEND Messages

Error Message     
 
    
    
   

%SYSDB-BACKEND-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The backend library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-BACKEND-7-INTERNAL_PATH [chars] for pathname [chars]: rc [hex] ([chars])

Explanation    The backend library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-BACKEND-7-INVALIDARG Invalid arguments to [chars]

Explanation    Invalid arguments were supplied to a backend function

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-BACKEND-7-INVALIDARG_PATH Invalid arguments to [chars] for path [chars]

Explanation    Invalid arguments were supplied to a backend function

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-BACKEND-7-MISMATCH A [chars] argument was not in a valid format. The value passed was '[chars]'; backend converted this to '[chars]'

Explanation    The backend library has detected a mismatch between the actual and parsed values of a node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BACKUPDB Messages

Error Message     
 
    
    
   

%SYSDB-BACKUPDB-7-INTERNAL [chars]: rc [hex]

Explanation    The client library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LIBSYSDB Messages

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-APPLY [unsigned int] out of [unsigned int] apply callbacks failed (first error: [chars]), system may now be in an inconsistent state.

Explanation    An apply function failed, so the system may now be in an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-CERRNO_REG Failed to register block [dec] errors - cerr_register_dll returned [chars]

Explanation    The client library has failed to register SysDB's error code (cerrno) definitions.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-EDM_BIND SysDB client library received an EDM 'BIND' message not intended for it. Most probable cause of this error is that some other EDM has registered with the same LWM channel name as this EDM.

Explanation    The SysDB client library was unable to complete an EDM 'BIND' request as the EDM registration information sent with the message was invalid for the EDM.

Recommended Action    Ensure the LWM channel name used by this client is not being used by any other EDM. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The client library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])

Explanation    The client library has either failed to aquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-MULT_DEFAULTIFIERS An attempt was made to register a multiple verifier with a default function on path '[chars]' which already has a default provider.

Explanation    Another process has already registered a default provider function on this path. It is not possible to have multiple default providers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-RECONNECTION Failed to reconnect to SysDB server and re-register: rc [hex] ([chars])

Explanation    The client library has failed to reconnect to the SysDB server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-REFERRAL_COUNT Maximum number of bind referrals hit attempting to connect to path [chars].

Explanation    An internal library error has caused a connection attempt from a client to SysDB to fail.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-LIBSYSDB-7-RESTORE Failed to restore items after EDM registration on [chars], system may now be in an inconsistent state.

Explanation    If an EDM registers or reregisters on a path on which items already exist (and SYSDB_REGISTRATION_OPTION_SCAN has been specified), then those items have been deleted but not all restored after the EDM registration, so the system may now be in an inconsistent state.

Recommended Action    *RECUR*

SMC Messages

Error Message     
 
    
    
   

%SYSDB-SMC-7-DEPRECATED_PATH SysDB path '[chars]' is deprecated

Explanation    An operation has been attempted on a part of the SysDB namespace that should no longer be used.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%SYSDB-SMC-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-INTERNAL_STATE [chars]

Explanation    The server has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-INVALID_PATH SysDB path '[chars]' is invalid

Explanation    An operation has been attempted on a part of the SysDB namespace that should not be used.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%SYSDB-SMC-7-MULTI_NODE_TRANS Multi-node access from transaction will be non-atomic (transaction node [dec]:[dec], accessing node [dec]:[dec], by [chars])

Explanation    An application tried to use a transaction to access multiple nodes; this is not supported currently.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMC-7-PARSE_FAILED [chars] ('[chars]' from '[chars]')

Explanation    A pathname was used for a SysDB operation from which the destination node could not be parsed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]

Explanation    There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS.

Recommended Action    Upgrade all nodes to have the same version of SysDB installed.

Error Message     
 
    
    
   

%SYSDB-SMC-7-TIMEOUT Message #[unsigned int], destined for [chars], timed out having received [unsigned int] of [unsigned int] expected responses: returning [chars] to client [chars]

Explanation    A request timed out before SysDB MC received the expected number of replies

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-TRANS Attempted multi-node access from transaction was prevented (attempted to access multi-cast group [dec])

Explanation    A client attempted to use an unsupported distributed transaction.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]

Explanation    The server has come across and unexpected value for the specified parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-WRONG_PLANE An attempt was made to access SysDB path '[chars]'. This resolves to the [chars] plane and cannot be accessed on this card type.

Explanation    An application has tried to access a plane of SysDB data that does not exist on this node.

Recommended Action    *RECUR*

SMS Messages

Error Message     
 
    
    
   

%SYSDB-SMS-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The Medusa server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])

Explanation    The Medusa server has either failed to acquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]

Explanation    There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS.

Recommended Action    Upgrade all nodes to have the same version of SysDB installed.

Error Message     
 
    
    
   

%SYSDB-SMS-7-RESTARTING This process is restarting, as an essential piece of infrastructure is failing. [chars] ([chars]).

Explanation    The Medusa server is unable to function due to a problem with a piece of infrastructure. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-SEND_RESPONSE Sending [chars] via group_sendv_memberset failed [msg_size [unsigned int]]: [hex] ([chars])

Explanation    The Medusa server failed to send a message to SysDB MC

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-UNEXPECTED_MSG_TYPE An unexpected msg type was received: [dec]

Explanation    We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMS-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]

Explanation    The Medusa server came across an unexpected value for the specified parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SYSDB Messages

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_BIND [Sysdbcon] Could not bind to SysDB: [chars]

Explanation    Sysdbcon was unable to bind to the root of SysDB. It is possible that there is a problem with SysDB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_DATATYPERET [Sysdbcon] SysDB returned unrecognised datatype ([unsigned int])

Explanation    The datatype returned by SysDB does not match any of those expected by Sysdbcon. This is probably because the type is missing in Sysdbcon.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_EXTFMTSTR [Sysdbcon] Unable to extract format string from packed tuple

Explanation    The packed tuple returned from SysDB is in some way corrupt. The format string it contains could not be read.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_FILEREAD [Sysdbcon] Unable to read from command file

Explanation    An error occurred during a read operation from the instruction file.

Recommended Action    Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_INTERR [Sysdbcon] An internal error has occurred

Explanation    The code has performed an action which should not be possible.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_NOFILE [Sysdbcon] The specified command file ([chars]) could not be opened

Explanation    The instruction file specified when Sysdbcon was started cannot be found. The most probable reason is that an incorrect name was supplied.

Recommended Action    Check that the file name supplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_PKDREAD [Sysdbcon] Unable to read in data for packed tuple

Explanation    An error occurred while preparing to read instructions from the command line.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_PKDTUPLECRE [Sysdbcon] Unable to create packed tuple

Explanation    An error occurred creating a packed tuple.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_PKDTUPLEFILE [Sysdbcon] No data for packed tuple in file

Explanation    An error occurred during a read operation from the instruction file.

Recommended Action    Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_READERINIT [Sysdbcon] Unable to initialize the command line reader

Explanation    An error occurred while preparing to read instructions from the command line.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_UNPACKTUP [Sysdbcon] Unable to unpack packed tuple

Explanation    The packed tuple returned from SysDB is in some way corrupt. The data it contains could not be read.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ABORTBULK [Sysdbcon] While aborting a bulk operation the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ABORTTRANS [Sysdbcon] While aborting a transaction the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BAD_INTEGER [Sysdbcon] Warning: bad integer format or integer value is out of range.

Explanation    The user entered integer in unrecognized format or out of range of current integer data type.

Recommended Action    Correct input value and run command again.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BADFORMAT [Sysdbcon] Badly formatted command

Explanation    An unescaped ''' character was found part way through a token in a command string.

Recommended Action    Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BIND_NOTFOUND [Sysdbcon] Warning: now bound to a non-existent node.

Explanation    The user bound to a node which does not exist. This is a warning only - this action is perfectly legal.

Recommended Action    Check that this is the directory you intended to bind to.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BULK_NUM_OPS [Sysdbcon] While getting the number of operations in the bulk the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_ADD_DELETES [Sysdbcon] While adding deletes to the bulk buffer the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_ADDDIFFS [Sysdbcon] While adding diffs to the bulk the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_DELETE [Sysdbcon] While performing a bulk regular expression delete the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_MERGE [Sysdbcon] While merging files the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_COMMITTRANS [Sysdbcon] While committing a transaction the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_COPY [Sysdbcon] While copying item [chars] to [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item to copy does not exist. The details are in the error string.

Recommended Action    Check that the item to copy exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CREATE [Sysdbcon] While creating item [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item to create already exists. The details are in the error string.

Recommended Action    Check that the item to create does not exist. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DATAFIND [Sysdbcon] While executing the find data request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DATALIST [Sysdbcon] While executing the datalist request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DATATYPE [Sysdbcon] Unrecognised datatype ([chars])

Explanation    A datatype other than one of those supported was supplied.

Recommended Action    Use help for a list of supported datatypes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DELETE [Sysdbcon] While deleting item [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item does not exist. The details are in the error string.

Recommended Action    Check that the item to delete exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EDM_NOT [Sysdbcon] While generating EDM notifications the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ENDBULK [Sysdbcon] While ending a bulk operation the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ERRORSLIST [Sysdbcon] While executing the errors list request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EVENT [Sysdbcon] Unrecognised notification event ([chars])

Explanation    A notification event other than one of those supported was supplied.

Recommended Action    Use help for a list of supported events. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EVENTFIND [Sysdbcon] While executing the event find request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EXCESS [Sysdbcon] Excess tokens in command string

Explanation    There were more tokens entered as part of the command string than are required for the command.

Recommended Action    Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_FILERESTORE [Sysdbcon] While restoring items from a file the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_FILESAVE [Sysdbcon] While saving items to a file the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_FIND [Sysdbcon] While executing the find request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_GET [Sysdbcon] While fetching item [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item to fetch does not exist. The details are in the error string.

Recommended Action    Check that the requested item exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_GET_ITEMS [Sysdbcon] While fetching items from path [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the items to fetch do not exist. The details are in the error string.

Recommended Action    Check that the requested items exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ITERATE [Sysdbcon] While executing the iterate request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_LIST [Sysdbcon] While executing the list request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_MISMATCH [Sysdbcon] Mismatched quotes in command

Explanation    A quoted token was not terminated with a quote character.

Recommended Action    Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_MISSEVENT [Sysdbcon] Missing notification event

Explanation    The command entered requires a notification event type and one was not supplied.

Recommended Action    Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_MISSFILENAME [Sysdbcon] Missing file name

Explanation    The command entered requires an file name and one was not supplied.

Recommended Action    Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_MISSNAME [Sysdbcon] Missing item name

Explanation    The command entered requires an item name and one was not supplied.

Recommended Action    Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_MISSTYPE [Sysdbcon] Missing item type

Explanation    The command entered requires an item type and one was not supplied.

Recommended Action    Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_MISSVALUE [Sysdbcon] Missing item value

Explanation    The command entered requires an item value and one was not supplied.

Recommended Action    Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_PATHCREATE [Sysdbcon] Unable to create full path from path supplied
Current dir: [chars]
Path supplied [chars]

Explanation    When combining the path supplied with the path Sysdbcon is currently bound to an error occurred. This could be because the path created would be invalid.

Recommended Action    Check that the combination of paths is valid. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_PKDFMTSTR [Sysdbcon] Format string contains illegal character ([char])

Explanation    The packed tuple format string should only contain combinations of '%', 'd', 'ld' and 's'. A character other than one of these was found in the string.

Recommended Action    Check that the format string is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_RDLOCK [Sysdbcon] While getting a read lock the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_REBIND [Sysdbcon] While binding to [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the path supplied is invalid. The details are in the error string.

Recommended Action    Check that the path is valid. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_REMOVE_BULK_OP [Sysdbcon] While removing operation on [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.

Recommended Action    Check that the operation to remove exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_SET [Sysdbcon] While setting item [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item does not exist or has the wrong type. The details are in the error string.

Recommended Action    Check that the item to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_STARTBULK [Sysdbcon] While starting a bulk operation the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_STARTTRANS [Sysdbcon] While starting a transaction the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the timeout time was not correctly entered. The details are in the error string.

Recommended Action    Check that the format of the timeout time is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_UNKCMD [Sysdbcon] Unrecognised command. Type help or ? for a list of available commands

Explanation    The first token in a command string was not a recognised Sysdbcon command.

Recommended Action    Check the list of available commands and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_UNLOCK [Sysdbcon] While releasing a lock the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_VERIFY [Sysdbcon] Verification failed on item [chars] for the following reason
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item does not exist or has the wrong type. Or because the verifier did not allow the change. The details are in the error string.

Recommended Action    Check that the item to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_VRFNRES [Sysdbcon] While resuming verification the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_VRFNSUSP [Sysdbcon] While suspending verification the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_WRLOCK [Sysdbcon] While getting a write lock the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-TIMEOUT_NFN Process '[chars]' (jid [dec], node [chars]) failed to pick up notification event within the timeout period ([unsigned int] seconds)

Explanation    A notification event sent by the SysDB server timed out.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-CFG_WRITE [chars] (jid [dec]) wrote to the configuration namespace (item: /[chars]). Illegal modification of configuration is not allowed.

Explanation    A non-management client illegally modified part of the system configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-CLIENT_STATS [chars]: name:[chars], jid:[dec] [client [unsigned int] of [unsigned int]]

Explanation    SysDB server hasn't enough space to add client statistics for this process.

Recommended Action    None.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-INFO [chars]: rc [hex] ([chars])

Explanation    The server detected an error with one of its clients.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-INVALID_PATHNAME [chars] attempted an item get on a subtree path ([chars]). Item gets should only be attempted on items, with no trailing '/'

Explanation    A process, likely to be a show command, is attempting to access a sysdb item with an incorrect path string.

Recommended Action    *DEBUG*

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])

Explanation    The server has either failed to aquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-LTRACE_INIT SysDB ltrace init failed. Error initialising [[chars]] trace buffer. Error returned by ltrace initialisation: [chars]

Explanation    The ltrace buffer could not be initialised

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-REPLICATOR_NO_CB No completion notification received for update message [unsigned int]

Explanation    The SysDB replicator module on the active server did not receive a callback from the transport library. The request will be allowed to continue without the replication acknowledgement. If any replicas have not received the update, they will resync on the next update.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-REPLY Failed to send reply to client jid [unsigned int] tid [unsigned int] node [chars]: rc [hex] ([chars])

Explanation    The server failed to reply to a client request. A likely reason for this is that the process in question has exited.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show process location all command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show process location all output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-SEND [chars] to process '[chars]' (jid [dec], node [chars]): errno: [dec] ([chars])

Explanation    The SysDB server failed to send an asynchronous message to a SysDB client. A likely reason for this is that the process in question has exited.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show process location all command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show process location all output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-SHUTDOWN Process is shutting down, rc [hex] ([chars])

Explanation    A SysDB server process has performed a graceful shutdown and will be restarted.

Recommended Action    Check to make sure the process has restarted. If not, restart manually Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-STARTUP Startup request for '[chars]' from '[chars]' (jid [dec]) failed for a process on a slow starting node

Explanation    A startup request failed during the second round of callbacks.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-TIMEOUT [chars] request for '[chars]' from '[chars]' (jid [dec], node [chars]). No response from '[chars]' (jid [dec], node [chars]) within the timeout period ([unsigned int] seconds)

Explanation    A timeout occured whilst processing a request.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-TIMEOUT_APPLY Apply callback for '[chars]' from '[chars]' (jid [dec], node [chars]). No response from '[chars]' (jid [dec], node [chars]) within the timeout period ([unsigned int] seconds), system may now be in an inconsistent state

Explanation    An apply callback timed out, so the system may now be in an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-TIMEOUT_APPLY_BATCH Apply callback of [unsigned int] events from '[chars]' (jid [dec], node [chars]). No response from '[chars]' (jid [dec], node [chars]) within the timeout period ([unsigned int] seconds), system may now be in an inconsistent state.

Explanation    An apply callback timed out, so the system may now be in an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-TIMEOUT_VRFN_BATCH Batched verification request of [unsigned int] events from '[chars]' (jid [dec], node [chars]). No response from '[chars]' (jid [dec], node [chars]) within the timeout period ([unsigned int] seconds)

Explanation    A verification event sent by the SysDB server timed out.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-7-USAGE Incorrect arguments: Usage: [chars] [svr_threads] l = local-plane; s = shared-plane; a = admin-plane Maximum number of threads is [dec].

Explanation    Incorrect command line parameters were passed to the sysdb server, and so it failed to start.

Recommended Action    Check the startup arguments passed to sysdb. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SYSDBHELPER Messages

Error Message     
 
    
    
   

%SYSDB-SYSDBHELPER-7-INTERNAL [chars]: rc [hex]

Explanation    The client library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDBHELPER-7-LOCKING Failed to [chars] [chars]. Error [dec]

Explanation    The client library has either failed to aquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SYSDBUTILS Messages

Error Message     
 
    
    
   

%SYSDB-SYSDBUTILS-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The client library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDBUTILS-7-INTERNAL_NODEID_STR NodeID to string conversion failed for node id [dec] (rc [hex] - [chars])

Explanation    The client library was unable to convert the specified node ID into a node description string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDBUTILS-7-LOCKING Failed to [chars] [chars]. Error [dec]

Explanation    The client library has either failed to aquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.