Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.3
Security Messages
Downloads: This chapterpdf (PDF - 393.0KB) The complete bookPDF (PDF - 7.09MB) | Feedback

Security Messages

Table Of Contents

Security Messages

aaa_task Messages

AAA Messages

CEPKI Messages

IKE Messages

IMP Messages

IPP Messages

KEYCHAIN Messages

LOCALD Messages

login Messages

PKI Messages

RADIUSD Messages

SAM Messages

sIMP Messages

SPM Messages

SSHD Messages

TACACSD Messages


Security Messages


This section contains all Security related System Error Messages, such as AAA, IPSec and related protocols, and so forth. The following facility codes are represented in this module:

aaa_task Messages

AAA Messages

CEPKI Messages

IKE Messages

IMP Messages

IPP Messages

KEYCHAIN Messages

LOCALD Messages

login Messages

PKI Messages

RADIUSD Messages

SAM Messages

sIMP Messages

SPM Messages

SSHD Messages

TACACSD Messages

aaa_task Messages

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-DEBUG_ERROR [chars]: [chars]

Explanation    Error message from AAA task debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]

Explanation    Error message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-INVALID_AAA_TASK_DEBUG_FLAG AAA task debug flag [dec] does not exist

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-aaa_task-7-GENERIC_ERROR [chars]: [chars]

Explanation    Internal debugging message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

AAA Messages

Error Message     
 
    
    
   

%SECURITY-AAA-3-DEBUG_ERROR [chars]: [chars]

Explanation    Encountered an error in debug module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-DES_INIT_FAIL [chars]: DES initialization failed

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-DLLMAIN_ERROR Error encountered while initializing DLL for [chars]: [chars]

Explanation    Error message from DLL initialization module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERR_SERVER_GROUP [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERROR_NO_MEM Not enough memory available while [chars]

Explanation    Failed to allocate necessary memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-INVALID_DEBUG_FLAG The AAA debug flag [dec] does not exist

Explanation    The debug flag specified is not supported.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-LIB_UTIL_ERROR_NO_MEM Not enough memory available while [chars]

Explanation    Failed to allocate memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-4-WHITESPACE_TRUNCATED_IN_SERVER_KEY WARNING: The server key contained trailing whitespace and was truncated

Explanation    Whitespace is not allowed at the end of a server key.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-7-ERR_ECM Failed to open event connection for a [chars]: [chars]

Explanation    The initial connection failed, but a retry has been successfully rescheduled.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-7-ERR_SYSDB [chars] path [chars]: [chars]

Explanation    'Failed to execute a SysDB operation'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CEPKI Messages

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-ERR [chars]

Explanation    CEPKI general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-ERR_2 [chars] [chars]

Explanation    CEPKI general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-INFO [chars]

Explanation    CEPKI general info message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-WARNING [chars]

Explanation    CEPKI general warning message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

IKE Messages

Error Message     
 
    
    
   

%SECURITY-IKE-3-ADD_KEY_FAIL IKE detects failure adding key, name [chars], ip address [unsigned int]

Explanation    IKE found failure when adding key

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-AUTH_FAIL IKE detects failure during authentication [dec], [unsigned int]

Explanation    IKE found failure during authentication

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-BAD_CERT_USE IKE detects bad certificate was used, [chars], [chars]

Explanation    IKE found bad certificate was used

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-BAD_DOI_NOTIFY IKE detects bad DOI notify, DOI is [dec], address is [unsigned int]

Explanation    IKE found bad DOI notify

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-BADMAGIC Bad [chars] magic number ([hex]).

Explanation    'An internal software error.'

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-CRYPT_FAILURE IKE detects en/de-crypto services failure, [unsigned int], [chars]

Explanation    IKE found failure returned from en/de-crypto services

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_2_PARAM [chars], [chars]

Explanation    IKE general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_NO_MEMORY Out of memory

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERROR [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-IKEINIT [chars]

Explanation    An IKE initialization error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-INVAL_CERT IKE detects invalid certificate [chars], [chars]

Explanation    IKE found invalid certificate

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-MQ_FAIL [chars]:Failed on [chars]:[chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_ADDR_MATCH IKE detects no ID certificate address match [unsigned int], [dec], [unsigned int]

Explanation    IKE found no ID certificate address match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_DN_MATCH IKE detects no ID certificate DN match [chars], [dec], [chars]

Explanation    IKE found no ID certificate DN match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_FQDN_MATCH IKE detects no ID certificate FQDN match [chars], [dec], [chars]

Explanation    IKE found no ID certificate FQDN match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_USER_FQDN_MATCH IKE detects no ID certificate user FQDN match [chars], [dec], [chars]

Explanation    IKE found no ID certificate user FQDN match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-QUERY_KEY IKE detects failure when querying key

Explanation    IKE found failure when querying key

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-SA_NOT_AUTH IKE detects the sa is not authenticated [chars]

Explanation    IKE found the sa has not been authenticated

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-SA_NOT_OFFERED IKE detects SA not being offered [unsigned int], [chars]

Explanation    IKE found SA not offered

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-4-BAD_MESSAGE IKE message from [chars] failed its sanity check or is malformed

Explanation    A quick sanity check is done on all received ISAKMP messages to verify that all component payload types are valid, and that the sum of their individual lengths equals the total length of the received message. This message failed the sanity check. Persistantly bad messages could be a denial of service attack or bad decryption.

Recommended Action    'Contact the remote peer's administrator.'

Error Message     
 
    
    
   

%SECURITY-IKE-4-NO_SA IKE message from [chars] has no SA and is not an initialization offer

Explanation    IKE maintains state for a communication in the form of security associations. No security association exists for this packet and it is not an initial offer from the peer to establish one. This situation could denote a denial of service attack.

Recommended Action    'Contact the remote peer and/or his administrator'

Error Message     
 
    
    
   

%SECURITY-IKE-4-WARNING [chars]

Explanation    Internal Warning.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-4-WARNING2 [chars], [chars]

Explanation    Internal Warning.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-6-BAD_DOI_SA DOI value [dec] from SA offer from [chars] is invalid

Explanation    The DOI field of an SA offer defines how to parse the fields SAs with an unknown DOI cannot be parsed

Recommended Action    'If this situation persists contact the remote peer's administrator'

Error Message     
 
    
    
   

%SECURITY-IKE-6-MODE_FAILURE Processing of [chars] mode failed with peer at [chars]

Explanation    Negotiation with the remote peer failed.

Recommended Action    'If this situation persists contact the remote peer'

Error Message     
 
    
    
   

%SECURITY-IKE-6-NOT_ENCRYPTED IKE packet from [chars] was not encrypted and it should've been.

Explanation    A portion of the IKE exchange takes place in the clear and a portion is encrypted. This message should have been encrypted but was not.

Recommended Action    'Contact remote peer'

Error Message     
 
    
    
   

%SECURITY-IKE-6-UNK_EXCHANGE IKE peer at [chars] sent a message with unknown exchange [dec]

Explanation    IKE preforms actions on messages based on defined exchanges. The message received had an unknown exchange.

Recommended Action    'Contact the remote peer's administrator'

IMP Messages

Error Message     
 
    
    
   

%SECURITY-IMP-3-FATAL_ERR [chars]

Explanation    An internal software fatal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IMP-3-MQ_FAIL [chars]:Failed on [chars]:[chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IMP-4-MSG_WARN Receive invalid message type [dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPP Messages

Error Message     
 
    
    
   

%SECURITY-IPP-3-ERR_GENERAL [chars] [chars]

Explanation    Error description, error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IPP-3-ERR_MALLOC Cannot allocate memory in function [chars]()

Explanation    Internal error. System is out of memory - malloc failed.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IPP-6-INFO_GENERAL [chars]

Explanation    The IPSec IPP encountered some problem in genric nature or plain information.

Recommended Action    'No action is required.'

KEYCHAIN Messages

Error Message     
 
    
    
   

%SECURITY-KEYCHAIN-3-FATAL_ERR [chars]

Explanation    An internal software fatal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-KEYCHAIN-4-MSG_WARN Receive invalid message type [dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LOCALD Messages

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-AMBIGUOUS_PASSWD Password which is a single digit is not permitted

Explanation    Single digit passwords are not allowed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-BAG_ENCODE_ERR Failed to encode [chars] bag: [chars]

Explanation    Failed to encode a bag.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-BAGS_UNREG_ERR Failed to unregister [chars] bag: [chars]

Explanation    Failed to unregister a bag.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-DEBUG_ERROR [chars]: [chars]

Explanation    Error encountered in debug module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-EDM_INIT_ERR Failed to register EDM - [chars]

Explanation    Failed to initialize EDM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_INVALID_GROUP [chars]: [chars]

Explanation    AAA failed to recognize the specified server group name. It may be undefined.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_THREAD_FN [chars]: pthread [chars] failed: [chars]

Explanation    The call to pthread functions, such as pthread_create, lock/unlock a mutex or wait on a condition, failed. The error is displayed in the message.

Recommended Action    *SH_TECH*

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_UNSUPPORTED_GROUP Group [chars] is not valid for [chars]

Explanation    RADIUS does not support command authorization and command accounting.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LIST_UNDEFINED Method list [chars] is not defined

Explanation    Trying to configure a method list in the line configuration that is not defined in AAA

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LWA_ADD_DIR_FAIL Failed to add the username [chars] to lightweight authentication password database - [chars]. (Please remove/rename the file '/disk0:/AAA', which is in conflict with the directory '/disk0:/aaa/'.)

Explanation    A file with the same name as aaa directory detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LWA_ADD_FAIL Failed to add the username [chars] to lightweight authentication password database: [chars]

Explanation    Failed to enable this user to log into ksh.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LWA_REM_FAIL Failed to remove the username [chars] from lightweight authentication password database - [chars]

Explanation    Failed to remove a username from the LWA DB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    locald failed to allocate the required amount of memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-MSG_ERROR [chars]: [chars]

Explanation    Error encountered while handling messages received by locald.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-MSG_SIZE_ERR [chars]: Size ([dec]) - [chars]

Explanation    An internal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-PLANE_MISMATCH The username '[chars]' is already configured in the other plane (Admin/LR), please choose a different one

Explanation    The username has to be unique across the Admin and LR plane.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-RED_STATE_ERROR Error on changing redundancy state to [chars]: [chars]

Explanation    Error encountered during redundancy state transistion.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ROOT_USERDB_INIT_FAIL [chars]: [chars]

Explanation    Locald failed to create/remove the root user database on the disk0. This will affect authentication to ksh since it refers to this database.

Recommended Action    As a workaround an admin could create this directory in disk0 himself. This should get around the problem.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ROOT_USERDB_LOCK_ERR Failed lock operation '[chars]'. Error: [chars]

Explanation    A lock operation on shared resource, called by locald lwDB failed due to the mentioned error.

Recommended Action    Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-SETPRIO_FAILED Changing priority of locald failed: [chars]

Explanation    Changing locald priority failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-SHUTDOWN_ERROR [chars]: [chars]

Explanation    locald process failed to shutdown properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-SIGEVENT_SEND_FAIL Failed to send sigevent to [chars] - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-STARTUP_ERROR [chars]: [chars]

Explanation    locald process failed to startup properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-STBY_INIT_ERR Failed to initialize standby - [chars]

Explanation    Failed to initialize locald on standby node.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-ACCT_FAILURE Failed to send the accounting record for request id [dec] - [chars]

Explanation    Failed to send an accounting record to RADIUS or TACACS+ server

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-ACCT_TIMEOUT_FAILURE Failed to handle timeout for sending an accounting record (request id [dec]) - [chars]

Explanation    Failed to send an accounting record to RADIUS or TACACS+ server

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-CERR_REGISTER [chars]: [chars]

Explanation    locald failed to register error codes.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-CHKPT_REGISTER_FAILURE Error encountered while registering the checkpoint table [chars] - [chars]

Explanation    Encountered a checkpoint register failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-CHKPT_RESTORE_FAILURE Error encountered while recovering from checkpoint table [chars] - [chars]

Explanation    Encountered a checkpoint recovery failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-CHKPT_SAVE_FAILURE Error encountered while saving to checkpoint table [chars] - [chars]

Explanation    Encountered a checkpoint save failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-PASSWD_ALREADY_EXISTS Warning: The password is configured too for user '[chars]'

Explanation    An internal software error has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-SECRET_ALREADY_EXISTS Warning: The secret is configured too for user '[chars]'

Explanation    An internal software error has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-SYSDB_INIT_FAILURE Failed to initialize configuration [chars] - [chars]

Explanation    Failed to initialize SysDB connections or verification and will be retried

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-7-ERR_SYSDB_FD [chars] [chars]: [chars]

Explanation    Error encountered while using the System Database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-7-ERR_TTYMGMT_FD [chars]: [chars]

Explanation    Error encountered while using TTY management library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-7-GENERIC_ERROR [chars]: [chars]

Explanation    Generic error message used for internal debugging.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

login Messages

Error Message     
 
    
    
   

%SECURITY-login-2-AUTHEN_FAILED Failed authentication attempt by user '[chars]' from '[chars]'

Explanation    Error message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-DEBUG_ERROR Failed to [chars] debug module: [chars]

Explanation    Failed to initialize or shutdown the debug module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-DLLMAIN_ERROR Error encountered while initializing the DLL, path [chars]: [chars]

Explanation    Error message from debug initialization module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-INVALID_LOGIN_DEBUG_FLAG The login debug flag [dec] does not exist

Explanation    The debug flag specified is not supported.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-NO_MEMORY Not enough memory was available while [chars]

Explanation    Failed to allocate necessary memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PKI Messages

Error Message     
 
    
    
   

%SECURITY-PKI-6-ERR_1_PARAM [chars]

Explanation    CEPKI general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-ERR_2_PARAM [chars] [chars]

Explanation    CEPKI general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-LOG_INFO [chars]

Explanation    CEPKI general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

RADIUSD Messages

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ACCT_NOTIFY_FAIL Failed to notify the completion of accounting to sender - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ADD_SYS_IP_ADDR_ATTR_ERR Adding NAS IP address failed, omitted: [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ADD_VSA_FAIL Failed to add VSA av-pair [dec] with [chars]

Explanation    Failure encountered while adding a VSA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_AVPAIR Bad AAA avpair [dec] with length [dec] detected

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_MSG_TYPE Unsupported message type [dec] encountered while [chars]

Explanation    Found an unsupported AAA message type in avlist.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_FORMAT_BIT Format bit is not set for VSA [chars]

Explanation    Format bit is not set for VSA %s according to table bitmap.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_LENGTH Inconsistent [chars] VSA length [dec] was encountered

Explanation    VSA format error found in radiusd while translating.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_TYPE Bad [chars] VSA type [dec] with vendor_id [dec] encountered, possibily out of range

Explanation    VSA format error found in radiusd while translating.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_VENDOR Vendor specified for VSA [chars] is not recognized

Explanation    Vendor specified for the VSA is not recognized according to table bitmap. An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAG_ENCODE_ERR Failed to encode [chars] bag: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAGS_UNREG_ERR Failed to unregister bag [chars]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-CONFIG_ERR Encountered configuration error while [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-DEBUG_ERROR [chars]: [chars]

Explanation    Error encountered in debug module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EDM_INIT_ERR Failed to register EDM - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_CREATE_SERVER_ENTRY Failed to create a server entry: [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_CREATESG Unable to apply server group '[chars]' configuration: [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SET_SERVER_ENTRY Error while setting or unsetting a parameter in server entry: [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBBIND Failed to bind to SysDB at [chars]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_TTY_IFH_PRESENT Both ttyname ([chars]) and ifh ([hex]) are present in the message

Explanation    In the AV pair message recieved from the radiusd clients should have either ttyname or interface handle, not both.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Failed to attach handler for async events: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-IP_ADDR_TOO_LONG_ERR IP address [chars] is too long ([dec])

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-LOCKING Failed to obtain or release [chars] lock (error: [chars])

Explanation    radiusd has either failed to obtain or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    radiusd has failed to allocate the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MSG_ERROR [chars]: [chars]

Explanation    Error encountered while handling messages received by tacacsd.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MSG_SIZE_ERR [chars]: size [dec] - [chars]

Explanation    An internal error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-NOT_VSA The specified attribute [dec] is a non-VSA radius attribute

Explanation    Encountered a non VSA attribute.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-PARAMETER [chars]

Explanation    RADIUS was passed an invalid parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RIB_BIND_ERR Binding to RIB failed: [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RIB_LOCAL_ADDRESS_ERR NAS IP not found; address omitted: [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SERVER_MUTEX_INIT_FAILED Failed to initialize mutex in radiusd

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SETPRIO_FAILED Changing priority failed [dec]

Explanation    Attempt to change priority failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SHUTDOWN_ERROR [chars]: [chars]

Explanation    TACACS+ process failed to shutdown properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-STARTUP_ERROR [chars]: [chars]

Explanation    TACACS+ process failed to startup properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR1 daemon VSA [dec] does not match type string in [chars].

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR2 Parsing error on daemon VSA '[chars]' (no protocol or type field)

Explanation    VSA format error in daemon user configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR3 Parsing error on daemon VSA '[chars]' (no value field or invalid length)

Explanation    VSA format error in daemon user configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR4 Parsing error on daemon VSA '[chars]', order number [dec] (not 0-254) is not supported

Explanation    VSA format error in daemon user configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR5 Parsing error on daemon VSA '[chars]' (invalid type field)

Explanation    VSA format error in daemon user configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_NOTFOUND VSA [dec] ([chars]) not found in daemon-to-nas tables after string comparing

Explanation    VSA not found in the deamon to NAS mapping table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_TABLE_ERROR Table [chars] entry [dec] has inconsistent ignore flag and standard attribute type

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ZERO_TIMER_REPEATEDLY_EXPIRING_ERROR [chars]: [dec] [dec]

Explanation    The deadtimer expiry event repeatedly occured with a deadtime value of zero. This could lead to cpu hogging by radiusd process.

Recommended Action    Restarting radiusd process should get around the problem.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-CERR_REGISTER [chars]: [chars]

Explanation    radiusd failed to register error codes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-IP_ADDRESS_NOT_FOUND WARNING: No IP address configured for [chars], using default address instead: [chars]

Explanation    There is no IP address configured for the specified interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-RADIUS_NOSERV Warning: Server [chars]/[dec]/[dec] is not defined

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ATTR_LENGTH Encountered bad attribute length [dec] (attr [dec]) while [chars], ignored

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ATTR_TYPE Encountered bad attribute type [dec] while [chars], ignored

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_ACCT_ID Cannot convert accounting task id to accounting session id: [chars]

Explanation    Accounting task id is probably larger than 2^24 - 1

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_BAD_REPLY_ATTR reply attr size=[dec] not equal to sum of parts=[dec]

Explanation    The length of the reply attribute does not equal its parts.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_BAD_SESSID_ATTR Using incorrect AAA attribute for RAD_ACCT_SESSID_ATTR [chars]

Explanation    Check consistancy between radius_table and nas_to_daemon_av_table

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_LEAFTIMER Cannot allocate leaf timer - [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SOCKET_BIND_FAIL Error in binding socket: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SOCKETFAIL Error in opening socket: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-EVENT_CONN_DESTROY_FAILED Event connection destroy failed while [chars]: [chars]

Explanation    An internal software error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-EVENT_CONN_INIT_FAILED Failed to initialize event connection for [chars] (error: [chars])

Explanation    An internal software error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-GOT_CISCO_VSA Encountered a Cisco VSA while processing non Cisco VSAs

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INTRFC_STATE_QUERY_FAILED Cannot query state of interface [chars] (source interface not applied): [chars]

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INVALID_AUTHOR_TYPE Invalid authorization type [dec] encountered while [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INVALID_VSA Found invalid VSA attr [dec] while [chars], ignored

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-LEN_TOO_LONG Length of attribute [chars] exceeds limit [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-SNPRINTF_FAIL snprintf failed while [chars]: [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-UNSUPPORTED_VENDOR Found unsupported vendor id [dec] while [chars], ignored

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-7-GENERIC_ERROR [chars]: [chars]

Explanation    Generic error message used for internal debugging.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SAM Messages

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_INVALID_DEVICE Invalid device name '[chars]'

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have SAM index entry

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_NO_MEMORY Out of memory

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_REG_MSGNO Could not register SAM_MSGNO message handler for message id [dec]: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_SYSDB_SET Failed to set item [chars] in SysDB: [hex], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_WR_FILE Failed writing file : [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-WARN_NVRAM NVRAM is not available, nvram process might have been down.

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-WARN_SPM SPM is not available, [chars].

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-CAUGHT_SIGNAL server terminating..

Explanation    SAM server caught a signal, and terminated

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-NO_BK_LOG SAM log backup file is not present, will try to recover the backup log from SysDB

Explanation    For some reason, the backup file of SAM log has disappeared.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-SYSDB_INTEGRITY Cannot guarantee the integrity of SAM SysDB name space, SAM internal tables had been discarded, and will try to recover from backup files.

Explanation    Found digest mistmatch for SAM's SysDB name space, the SAM portion of SysDB had been deleted. If SAM backup files exists, this should not impact SAM's functionality; otherwise, CA root certificate and CRL will be lost

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-WARN_CA_CERT_EXPIRED SAM detects the CA certificate had expired, but accepted by user

Explanation    SAM found the expired CA certificate in table had been accepted by user.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-WARN_CSS_CERT_EXPIRED SAM detects the PIE certificate had expired, but accepted by user

Explanation    SAM found the expired CSS certificate in table had been accepted by user.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-ERR_1_PARAM [chars]

Explanation    SAM general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-ERR_2_PARAM [chars], [chars]

Explanation    SAM general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_CHANGE_NOT_PERSISTENT SAM found no ENA device with sufficient space to backup the modified SAM table, the change will not be persistent until a successful ENA installation on a flash device.

Explanation    SAM found there is nowhere to backup the modified SAM table.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_DIGEST_FILE_MISSING Secure digest file is not found, cannot guarantee the integrity of memory installed files.

Explanation    SAM found digest file in NVRAM is missing, discard the memory packages.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_DIGEST_FILE_REINIT Secure digest file not present, SAM will re-init the secure digest file

Explanation    SAM found digest file missing from NVRAM, re-init the file.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_INIT_LOG_BACKUP_FILE SAM failed to initialize log backup file

Explanation    SAM failed to initalize log backup file in NVRAM, log entry not backed up

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_MEM_DIGEST SAM will remove backup files for memory digest tables and users MUST re-install the memory packages.

Explanation    SAM found MEM digest compare not successful, discard the memory packages.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARNING [chars]

Explanation    SAM general warning message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

sIMP Messages

Error Message     
 
    
    
   

%SECURITY-sIMP-3-FATAL_ERR [chars]

Explanation    An internal software fatal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-sIMP-4-ITI_WARN [chars] [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-sIMP-4-MSG_WARN [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SPM Messages

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_CHAN_CONNECT Message chan connect ([chars]) failed

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_ENTRY_FIND Unable to find a delete entry for : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_INVALID_EVENT SPM server received invalid event : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_MALLOC Cannot allocate memory in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_MSG_GEN [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_OPEN_SECURE Error in opening secure file : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PTHREAD_CREATE pthread create error : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PTHREAD_INIT pthread attr init error : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PTHREAD_SET pthread set detach state error : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PULSE_CODE Unknown pulse code ([dec]) received

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_REG_HANDLER Could not register async handlers : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_REG_MSG Could not register SPM_MSGNO message handler for message id - [dec] : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_REPLY_FAIL Could not reply to client message : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_TOKEN_MISMATCH Delete file [chars] token mismatch

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

SSHD Messages

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_DETAILS [chars] [chars] [chars]

Explanation    Error description, client address, error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_ERRNO [chars] [chars]

Explanation    Error description, error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_GENERAL [chars]

Explanation    SSH encounterd some error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_MALLOC Cannot allocate memory in function [chars]()

Explanation    Internal error. System is out of memory - malloc failed.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_BIND Cannot bind to sysdb in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_DATALIST Cannot get datalist in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_DELETE sysdb_item_delete failed for tuple [chars] in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_PACK Cannot pack tuple in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_SET sysdb_item_set failed for tuple [chars] in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-6-INFO_GENERAL [chars]

Explanation    The sshd encountered some problem in genric nature or plain information.

Recommended Action    'No action is required.'

TACACSD Messages

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-BAG_ENCODE_ERR Failed to encode bag information for '[chars]' - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-BAGS_UNREG_ERR Failed to unregister bags - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-DEBUG_ERROR [chars]: [chars]

Explanation    Error encountered in debug module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-EDM_INIT_ERR Failed to register EDM - [chars]

Explanation    Failed to start the EDM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_ATTACH_SOCK Unable to attach an event handler for socket [dec] - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CONFIG_GLOBAL Error while setting or unsetting TACACS+ [chars] configuration - [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CONFIG_SERVER Error while setting or unsetting [chars] in a server entry - [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CREATE_SERVER_ENTRY Cannot create a TACACS+ server entry - [chars]

Explanation    Error occured while creating TACACS+ server entry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CREATE_SGSERVER Unable to add the server '[chars]' to group '[chars]' - [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CREATESG Unable to create the server group '[chars]' - [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_DELETE_SGSERVER Unable to delete the server '[chars]' from group '[chars]' - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_DELETESG Unable to delete the server group '[chars]' - [chars]

Explanation    A configuration error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_SYSDBBIND Failed to bind to SysDB for path [chars] after [dec] retries

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-MEMORY Failed to allocate [unsigned int] bytes while [chars]

Explanation    tacacsd has failed to allocate the required amount of memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-MSG_ERROR [chars]: [chars]

Explanation    Error encountered while handling messages received by tacacsd.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-MSG_SIZE_ERR [chars]: size [dec] - [chars]

Explanation    A message with illegal size was received or to be sent.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-PARAMETER [chars]

Explanation    An invalid argument was passed to either the tacacsd or one of its funtions.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-PROBE_THREAD_CREATE_FAILED Unable to create thread to probe status of TACACS+ server [chars]/[dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-SETPRIO_FAILED Failed to change server priority - [chars]

Explanation    Attempt to change priority failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-SHUTDOWN_ERROR [chars]: [chars]

Explanation    TACACS+ process failed to shutdown properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-STARTUP_ERROR [chars]: [chars]

Explanation    TACACS+ process failed to startup properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-CERR_REGISTER [chars]: [chars]

Explanation    tacacsd failed to register error codes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-IFHANDLE_NULL WARNING: Cannot obtain handle for the interface [chars]: [chars]

Explanation    Error encountered while obtaining handle for the interface specified as the source interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-NO_IP_ADDRESS WARNING: No IP address has been configured for [chars]

Explanation    There is no IP address configured for the specified interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-NOSUCH_INTF WARNING: Specified source interface [chars] is not present: [chars]

Explanation    The interface specified as source interface is not present.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-SRCINTF_NOTUP WARNING: Specified source interface [chars] is not UP

Explanation    The interface specified as source interface is not UP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-TACACS_NOSERV Warning: Server [chars] is not configured

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-NO_CMD No valid command provided for [chars]

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-NULL_REQ Encountered a NULL request pointer while [chars]

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-SERVER_DOWN TACACS+ server [chars]/[dec] is DOWN - [chars]

Explanation    TACACS+ server is unreachable or down.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-TIMEOUT_IGNORED A time out event has been ignored for context key [chars] (session [hex])

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-7-GENERIC_ERROR [chars]: [chars]

Explanation    Error message for internal debugging purposes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.