Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3
Routing Messages
Downloads: This chapterpdf (PDF - 174.0KB) The complete bookPDF (PDF - 1.82MB) | Feedback

Routing Messages

Table Of Contents

Routing Messages

HFR_IPV4_MRIB Messages

IPV4_MFWD_HFR Messages

IPV4MC_STATIC Messages

MPLS_HW Messages


Routing Messages


This section contains all routing related System Error Messages, such as MRIB, MFWD, and so forth. The following facility codes are represented in this module:

HFR_IPV4_MRIB Messages

IPV4_MFWD_HFR Messages

IPV4MC_STATIC Messages

MPLS_HW Messages

HFR_IPV4_MRIB Messages

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-CHKPT_ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_ADD_ERR Failed to add LC [dec] into FGID [dec]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_BATCH_ADD_ERR Failed to add batch of LCs into FGIDs: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_BATCH_REMOVE_ERR Failed to remove batch of LCs from FGIDs: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_ERR Failed to [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_REMOVE_ERR Failed to remove LC [dec] from FGID [dec]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-IFH_ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-IM_NAME_ERR im_interface_name error in function [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-INTERNAL_ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-INVALID_FGID_ERR Failed to [chars] : invalid fgid value [hex]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-MEM_ERR Failed to [chars] for [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-PERF_ERR Failed to [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MFWD_HFR Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-5-ERR_SYSDB_INIT [chars] : [chars]

Explanation    The MFWD-HFR library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-7-ERR_BAG_REGISTRY Couldn't register bags : [chars]

Explanation    The MFWD-HFR library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-7-ERR_EDM_REGISTER Couldn't register edm : [chars]

Explanation    The MFWD-HFR library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-7-ERR_GEN [chars] failed : [chars]

Explanation    MFWD-HFR library encountered error during setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4MC_STATIC Messages

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_CERR_V [dec] [chars] [chars]

Explanation    Internal error. Cannot Register with CERR_V subsystem

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_DEBUG_INIT [chars] [dec] [chars]

Explanation    Internal error. Static Mcast debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_EVENT_INIT Cannot Initialize sigevent structure: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_EVM_CREATE Event Manager creation Failed: [chars]

Explanation    Internal error. Failed while creating event manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_IDB_INIT Cannot initialize IDB list: [chars]

Explanation    Internal error. Cannot create initialize IDB list

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_INTF Error [chars] [chars]

Explanation    Internal error. Error while doing IM or IDB stuff

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_MRIB [chars]: [chars]

Explanation    Internal error. Error while doing MRIB API

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_ROUTE [dec]: [chars] ([chars],[chars]/[dec])

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_ASYNC_CODE Cannot obtain pulse code for the timer: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_CREATE_LEAF Cannot create timer leaf: [chars]

Explanation    Internal error. Cannot create manageed timer leaf

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_INIT Cannot create managed timer: [chars]

Explanation    Internal error. Cannot create manageed timer

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TOPOLOGY_INIT Cannot create static topology

Explanation    Internal error. Cannot create manageed timer leaf

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_HW Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR [chars]. Error = [chars] (errno=[dec]).

Explanation    There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR_TLU_ALLOC [chars]. Error = [chars] (errno=[dec]).

Explanation    Hardware memory allocation for table lookup unit (TLU) failed. This can be because the system has more forwarding entries than supported limits or there is a software defect.

Recommended Action    Please collect output of show tlu server summary [egress/ingress] loc to see why the line card is running out of forwarding entries. Then try to reduce the entries if possible. Copy the error message and report to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR_TLU_WRITE [chars]. Error = [chars] (errno=[dec]).

Explanation    Hardware memory write for table lookup unit (TLU) failed. This can because 1) connection to mipc lost. 2) mipc/metro problem.

Recommended Action    Please collect output of show pse ipc clinet-connection all loc and show asic-errors pse [0|1] all loc . Copy the error message and report to technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR_WITH_LABEL [chars]. Error = [chars] (errno=[dec]). Out label = [dec].

Explanation    There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-6-INFO [chars]. Error = [chars] (errno [dec]).

Explanation    There was an internal failure that may impact non-essential system function.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-6-INFO_WITH_LABEL [chars]. Error = [chars] (errno [dec]). Out label = [dec].

Explanation    There was an internal failure that may impact non-essential system function.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.