Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3
Quality of Service (QOS) Messages
Downloads: This chapterpdf (PDF - 161.0KB) The complete bookPDF (PDF - 1.82MB) | Feedback

Quality of Service (QoS) Messages

Table Of Contents

Quality of Service (QoS) Messages

MDRR Messages

QOS Messages


Quality of Service (QoS) Messages


This section contains all Quality of Service related System Error Messages. The following facility codes are represented in this module:

MDRR Messages

QOS Messages

MDRR Messages

Error Message     
 
    
    
   

%QOS-MDRR-4-TOO_MANY_CLASSES Number of classes configured in the policymap exceeds the maximum number of queues allowed by the MDRR node

Explanation    Number of configured classes is larger than the number of queues allowed.

Recommended Action    Reduced the number of classes configured in the policymap.

QOS Messages

Error Message     
 
    
    
   

%QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars]

Explanation    The router cannot allocate more memory.

Recommended Action    It may be necessary to free some memory by exiting a program.

Error Message     
 
    
    
   

%QOS-QOS-3-BW_BUNDLE_ABSOLUTE Absolute values cannot be used for policies configured on Bundle interfaces. Use percentage values instead

Explanation    This is a fatal condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-BW_SUM_EXCEEDS_100_PC Sum of bandwidth allocated to all classes exceeds 100 percent. Allocated BW : [dec] percent

Explanation    This is a fatal condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]

Explanation    Connection to some server failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services

Explanation    Error occurred while waiting for an event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-DEF_CLASS_BW_EXCEED_99_PC Sum of bandwidth allocated to non-default classes exceeds 99 percent- Allocated BW : [dec] percent

Explanation    This is a fatal condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager

Explanation    Failed to create event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-MAX_CLASS_EXCEEDED_FOR_FABQOS Policy exceeds number of classes allowed for FabQoS

Explanation    Policy map is rejected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-ONLY_PRI_OR_BW_REM_PERCENT_ALLOWED Can not configure anything other than priority or bandwidth remaining percent for a fabqos policy

Explanation    Policy map is rejected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-OVER_SUBSCRIPTION_OF_MIN_BW_GAURANTEES There is oversubscription of minimum bandwidth guarantees - taking into account HP bandwidth. Bandwidth guarantees may not be met for this policy Allocated BW : [dec] percent

Explanation    This is a fatal condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to Initialize debug netion - [chars] Error : [chars]

Explanation    This is a fatal condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-QFIFO_SHOW_INT_INFO_FAIL Show FIFO init info Failed - [chars] Error : [chars]

Explanation    This is a fatal condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-UNSUPPORTED_MATCH_COS_CONFIG match cos command is not supported on the egress side. Invalid Configuration

Explanation    We do not support 'match cos' command on egress policies since layer2 encapsulations are removed before packets are sent to egress

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-UNSUPPORTED_MIN_BW_CONFIG Bandwidth command is not supported on the ingress side. Invalid Configuration

Explanation    We do not support bandwidth command on ingress policies. You can configure 'bandwidth remaining' to assign weights for the different queues.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-UNSUPPORTED_POLICER_RATE Unsupported policer value used in policymap : [dec] kbps. (It must be less than 16 Gbps)

Explanation    This is a fatal condition. Policy map is rejected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-UNSUPPORTED_Q_LIMIT_CONFIG In order to configure queue-limit for a class, you need to configure atleast one feature that allocates a separate queue for that class

Explanation    If you configure queue-limit command for a class, then that class requires a separate queue (due to h/w implementation). Since the user has not configured any feature for this class that allocates a separate queue for that class, the user is not allowed to configure queue-limit for that class.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event

Explanation    Error occurred while waiting for an event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-WRONG_QUANTAS_SPECIFIED Bandwidth remaining should only be specified in multiples of 5

Explanation    Policy map is rejected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-5-PARENT_HAS_NO_BW_MIN_CONFIGURED Child class bw min is reduced to zero due no min bw guarantee in parent

Explanation    Normally bandwidth command in a child class requires similar command in the parent class. Otherwise minimum bandwidth guaranteed for child class would be zero

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-7-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q - [chars] Error : [chars]

Explanation    This is a fatal condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.