Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3
Manageability (MGBL) Messages
Downloads: This chapterpdf (PDF - 143.0KB) The complete bookPDF (PDF - 1.82MB) | Feedback

Manageability (MGBL) Messages

Table Of Contents

Manageability (MGBL) Messages

IPSLA_TS_SVR Messages

NFEA_HW_PROG Messages


Manageability (MGBL) Messages


This section contains all Management Plane and Manageability related System Error Messages, including config, cli, sml, pm, and so forth. The following facility codes are represented in this module:

IPSLA_TS_SVR Messages

NFEA_HW_PROG Messages

IPSLA_TS_SVR Messages

Error Message     
 
    
    
   

%MGBL-IPSLA_TS_SVR-3-EVENT Error while processing event ([chars])

Explanation    An error occurred while processing an event at the time stamp server event manager

Recommended Action    This is an unusual situation which should not occur under normal circumstances. If the situation persists it may require the restart of the time stamping process.

Error Message     
 
    
    
   

%MGBL-IPSLA_TS_SVR-3-INIT Failed to initialize [chars]:[chars]

Explanation    Time stamp server failed to perform initialization task. The initialization step where it failed and the exact error are mentioned in the message.

Recommended Action    This could happen in a fatal situation. Such as system low on resources or communication failures. Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

NFEA_HW_PROG Messages

Error Message     
 
    
    
   

%MGBL-NFEA_HW_PROG-7-ERR_MSG [chars]

Explanation    During initialization, an internal error occurred in Netflow which involves exiting the process.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.