Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3
Installation Messages
Downloads: This chapterpdf (PDF - 143.0KB) The complete bookPDF (PDF - 1.82MB) | Feedback

Installation Messages

Table Of Contents

Installation Messages

PKG_PLAT_MEM_CACHE Messages

PKG_PLAT Messages


Installation Messages


This section contains all installation related System Error Messages. The following facility codes are represented in this module:

PKG_PLAT_MEM_CACHE Messages

PKG_PLAT Messages

PKG_PLAT_MEM_CACHE Messages

Error Message     
 
    
    
   

%INSTALL-PKG_PLAT_MEM_CACHE-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure

Explanation    An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PKG_PLAT Messages

Error Message     
 
    
    
   

%INSTALL-PKG_PLAT-7-MY_NODE_TYPE The packaging infrastructure was unable to determine the type of the current node: [chars]

Explanation    Either the card type is invalid, or the infrastructure is behaving incorrectly. The current request or operation may not be carried out.

Recommended Action    Upgrade to latest OS release. Check for unsupported hardware.

Error Message     
 
    
    
   

%INSTALL-PKG_PLAT-7-NO_MEM Failed to allocate [unsigned int] bytes of memory

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%INSTALL-PKG_PLAT-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure

Explanation    An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%INSTALL-PKG_PLAT-7-OPEN_FAIL The packaging infrastructure was unable to open a file ([chars]), error: [chars].

Explanation    Failed to open the specified file, which is required to proceed further. The request or operation may not be carried out.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%INSTALL-PKG_PLAT-7-UNKNOWN_NODE_TYPE The packaging infrastructure was unable to determine the type of a card ([hex])

Explanation    Either the card type is invalid, or the infrastructure is behaving incorrectly. The current request or operation may not be carried out.

Recommended Action    Upgrade to latest OS release. Check for unsupported hardware.