Guest

Cisco IOS XR Software (End-of-Sale)

Cisco IOS XR Commands Master List, Release 3.3

  • Viewing Options

  • PDF (1.3 MB)
  • Feedback
Index

Table Of Contents

Cisco IOS XR Command Master List, Release 3.3

Page Number Designators

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y -

Index

Cisco IOS XR Command Master List, Release 3.3

This page contains a list of all the commands documented for Cisco IOS XR Release 3.3, ordered alphabetically. Use the Alphabet Key or your web browser's Find function to search for a command. To access the documentation for a particular command, click on the command name.

Page Number Designators

HR   Cisco IOS XR Interface and Hardware Component Command Reference

IR   Cisco IOS XR IP Addresses and Services Command Reference

MCR   Cisco IOS XR Multicast Command Reference

MNR   Cisco IOS XR System Monitoring Command Reference

MPR   Cisco IOS XR MPLS Command Reference

QR   Cisco IOS XR Modular Quality of Service Command Reference

RR   Cisco IOS XR Routing Command Reference

SBR   Cisco IOS XR Session Border Controller Command Reference

SMR   Cisco IOS XR System Management Command Reference

A

aaa accounting command SR-2

aaa accounting system default command SR-4

aaa authentication command SR-6

aaa authorization command SR-9

aaa default-taskgroup command SR-12

aaa group server radius command SR-13

aaa group server tacacs+ command SR-13

abort command RR-958, SMR-96

absolute-timeout command SMR-774

accept-lifetime command SR-270

accept-register command MCR-68

access-class command SMR-776

access-group (IGMP) command MCR-2

access-group (NTP) command SMR-432

access-group command SMR-432

account command SBR-2

accounting command SR-17

accounting per-prefix command MCR-164

acl command SR-102

action (CAC) command SBR-3

action (IP SLA) command SMR-270

action (NA-DST) command SBR-5

action (RTG-SRC) command SBR-7

activate command SBR-9

active-cac-policy-set command SBR-11

active-routing-policy-set command SBR-12

add command RR-960

address command SR-104

addressed-key command SR-106

address-family (BGP) command RR-2

address-family (IS-IS) command RR-386

address-family (OSPF) command RR-564

address-family (OSPFv3) command RR-728

address-family ipv4 (EIGRP) command RR-312

address ipv4 command SBR-13

adjacency-check disable command RR-388

admin command SMR-98

admin-weight command MPR-178

advertisement-interval command RR-4

affinity command MPR-180

affinity location-set command SMR-518

affinity location-type command SMR-520

affinity program command SMR-522

affinity self command SMR-524

af-group command RR-6

ageout command SMR-272

aggregate-address command RR-8

ais-shut (SONET) command HR-254

ais-shut (SONET path) command HR-255

alias command SMR-100

allowas-in command RR-11

apply command RR-961

apply template command SMR-103

aps group command HR-256

archive-length command SMR-374

archive-size command SMR-375

area (OSPF) command RR-565

area (OSPFv3) command RR-729

arp command IR-80

arp timeout command IR-82

asic-scan pse command HR-178

as-override command RR-12

as-path in command RR-963

as-path is-local command RR-965

as-path length command RR-967

as-path neighbor-is command RR-969

as-path originates-from command RR-971

as-path passes-through command RR-973

as-path-set command RR-975

as-path unique-length command RR-977

attach command SBR-15

attach-controllers command SBR-16

attribute-flags command MPR-182

authenticate (NTP) command SMR-434

authenticate (PGP) command HR-258

authentication (IKE policy) command SR-108

authentication (OSPF) command RR-567

authentication (OSPFv3) command RR-731

authentication endpoint command SBR-17

authentication-key (NTP) command SMR-436

authentication-key (OSPF) command RR-569

authentication-key command SBR-19

authorization command SR-19

auto-cost (OSPF) command RR-571

auto-cost (OSPFv3) command RR-733

autonomous-system command RR-316

autoroute announce command MPR-184

autoroute metric command MPR-186

auto-rp candidate-rp command MCR-70

auto-rp listen disable command MCR-73

auto-rp mapping-agent command MCR-74

auto-summary (EIGRP) command RR-314

auto-summary (RIP) command RR-902

B

backoff command MPR-2

backup-bw command MPR-188

backup-path tunnel-te command MPR-190

bandwidth (QoS) command QR-2

bandwidth (RSVP) command MPR-74

bandwidth mam (RSVP) command MPR-76

bandwidth-percent (EIGRP) command RR-317

bandwidth rdm (RSVP) command MPR-78

bandwidth remaining command QR-4

banner exec command SMR-778

banner incoming command SMR-780

banner login command SMR-782

banner motd command SMR-784

banner prompt-timeout command SMR-786

bert e1 command HR-324

bert e3 command HR-326

bert error command HR-328

bert interval command HR-330

bert pattern command HR-332

bert t1 command HR-334

bert t3 command HR-336

bfd fast-detect (BGP) command HR-608

bfd minimum-interval (BGP) command HR-610

bfd multiplier (BGP) command HR-612

bgp as-path-loopcheck command RR-14

bgp attribute-download command RR-15

bgp auto-policy-soft-reset disable command RR-17

bgp bestpath as-path ignore command RR-19

bgp bestpath compare-routerid command RR-21

bgp bestpath cost-community ignore command RR-23

bgp bestpath med always command RR-25

bgp bestpath med confed command RR-27

bgp bestpath med missing-as-worst command RR-29

bgp cluster-id command RR-31

bgp confederation identifier command RR-33

bgp confederation peers RR-35

bgp dampening command RR-37

bgp default local-preference command RR-39

bgp enforce-first-as disable command RR-40

bgp fast-external-fallover disable command RR-42

bgp graceful-restart command RR-43

bgp graceful-restart graceful-reset command RR-45

bgp graceful-restart purge-time command RR-47

bgp graceful-restart restart-time command RR-49

bgp graceful-restart stalepath-time command RR-51

bgp log neighbor changes disable command RR-53

bgp maximum neighbor command RR-55

bgp nexthop-trigger-delay command RR-56

bgp redistribute-internal command RR-57

bgp router-id command RR-59

bgp scan-time command RR-61

bgp update-delay command RR-63

bgp write-limit command RR-65

billing command SBR-21

boundary command MCR-166

broadcast client command SMR-440

broadcast command SMR-438

broadcastdelay command SMR-442

broadcast-for-v2 command RR-904

bsr-border command MCR-76

bsr candidate-bsr command MCR-78

bsr candidate-rp interface command MCR-80

buckets (history command) command SMR-273

buckets (hourly) command SMR-275

buckets (interval) command SMR-276

bundle id command HR-576

bundle maximum-active links command HR-578

bundle minimum-active bandwidth command HR-580

bundle minimum-active links command HR-581

bundle port-priority command HR-582

C

cablelength command HR-338

cache command SBR-23

cache entries command HR-632

cache permanent command HR-634

cache-sa-holdtime command MCR-232

cache-sa-state command MCR-234

cache timeout command HR-636

cac-table command SBR-25

callee-dscp command SBR-27

callee-fax-qos-profile command SBR-29

callee-ip-precedence command SBR-31

callee-ip-TOS command SBR-33

callee-privacy command SBR-35

callee-video-qos-profile command SBR-37

callee-voice-qos-profile command SBR-39

caller-dscp command SBR-41

caller-fax-qos-profile (entry) SBR-43

caller-ip-precedence command SBR-45

caller-ip-TOS command SBR-47

caller-privacy command SBR-49

caller-video-qos-profile command SBR-51

caller-voice-qos-profile command SBR-53

call-policy-set command SBR-55

capability opaque command RR-573

capability orf prefix command RR-67

carrier-delay command HR-512

category (NA-DST) command SBR-57

category (NA-SRC) command SBR-59

cd command SMR-240

cdp advertise v1 command SMR-48

cdp command SMR-46

cdp holdtime command SMR-50

cdp log adjacency changes command SMR-52

cdp timer command SMR-54

ce tftp server command HR-2

cfs check command SMR-242

channel-group command HR-340

channel local command HR-260

channel remote command HR-262

cinetd rate-limit command IR-184

circuit-type command RR-390

class (policy map) command QR-6

class-map command QR-8

clear (exec) command SMR-105

clear (global) command SMR-107

clear access-list ipv4 command IR-2

clear access-list ipv6 command IR-4

clear adjacency ipv4 command IR-94

clear adjacency statistics command IR-95

clear arp-cache command IR-84

clear bfd counters (BGP) command HR-614

clear bgp command RR-70

clear bgp current-mode command RR-72

clear bgp dampening command RR-73

clear bgp flap-statistics command RR-75

clear bgp peer-drops command RR-77

clear bgp performance-statistics command RR-78

clear bgp self-originated command RR-79

clear bgp shutdown command RR-81

clear bgp soft command RR-83

clear cdp counters command SMR-56

clear cdp table command SMR-58

clear cef ipv4 drop command IR-97

clear cef ipv4 exceptions command IR-98

clear cef ipv4 interface bgp-policy-statistics command IR-99

clear cef ipv4 interface rpf-statistics command IR-101

clear cef ipv6 drop command IR-103

clear cef ipv6 exceptions command IR-104

clear cef ipv6 interface bgp-policy-statistics command IR-105

clear cef ipv6 interface rpf-statistics command IR-107

clear-classic-config command SMR-243

clear configuration commits command SMR-109

clear configuration sessions command SMR-111

clear context command SMR-526

clear controller egressq queue all command HR-182

clear controller egressq queue command HR-180

clear controller egressq statistics command HR-184

clear controller fabricq statistics command HR-129

clear controller fabric statistics command HR-128

clear controller ingressq command HR-131

clear controller pse statistics command HR-185

clear counters command SMR-770

clear counters sonet command HR-264

clear crypto ca certificates command SR-186

clear crypto ca crl command SR-187

clear crypto ipsec sa command SR-154

clear crypto isakmp command SR-110

clear eigrp neighbors command RR-319

clear eigrp topology command RR-321

clear fabricq counters command HR-133

clear flow exporter command HR-638

clear flow monitor command HR-640

clear flow platform producer statistics location command HR-642

clear host command IR-185

clear igmp counters command MCR-4

clear igmp group command MCR-6

clear igmp reset command MCR-8

clear install rollback oldest command SMR-696

clear interface command HR-430

clear ipv6 neighbors command IR-296

clear isis process command RR-392

clear isis route command RR-394

clear isis statistics command RR-396

clear lacp counters command HR-584

clear line command SMR-788

clear line vty command SMR-789

clear logging command SMR-375, SMR-376

clear logging correlator delete command SMR-2

clear logging events delete command SMR-3

clear logging events reset command SMR-7

clear lpts ifib statistics command IR-258

clear lpts pifib statistics command IR-259

clear mac-accounting command HR-514

clear mbus-statistics location command HR-3

clear mfib counter command MCR-167

clear mfib hardware resource-counters command MCR-168

clear mfib hardware route statistics command MCR-169

clear mld counters command MCR-10

clear mld group command MCR-11

clear mld reset command MCR-13

clear mpls forwarding counters command MPR-152

clear mpls ldp msg-counters neighbor command MPR-4

clear mpls ldp neighbor command MPR-5

clear mpls lmp command MPR-192

clear mpls oam counters command MPR-366

clear mpls traffic-eng counters tunnels command MPR-193

clear mpls traffic-eng fast-reroute log command MPR-194

clear mpls traffic-eng link-management statistics command MPR-195

clear msdp peer command MCR-236

clear msdp sa-cache command MCR-237

clear msdp stats command MCR-239

clear ospf process command RR-574

clear ospf redistribution command RR-576

clear ospf routes command RR-578

clear ospf statistics command RR-580

clear ospfv3 process command RR-735

clear ospfv3 redistribution command RR-736

clear ospfv3 routes command RR-737

clear ospfv3 statistics command RR-738

clear pim autorp command MCR-82

clear pim bsr command MCR-84

clear pim counters command MCR-86

clear pim topology command MCR-88

clear prefix-list ipv4 command IR-400

clear prefix-list ipv6 command IR-402

clear qos counters command QR-10

clear raw statistics pcb command IR-428

clear rip command RR-905

clear rip database command RR-906

clear rip interface command RR-908

clear rip out-of-memory command RR-909

clear rip statistics command RR-911

clear route command RR-862

clear rsvp counters all command MPR-80

clear rsvp counters chkpt command MPR-82

clear rsvp counters events command MPR-83

clear rsvp counters messages command MPR-85

clear rsvp counters oor command MPR-87

clear rsvp counters prefix filtering command MPR-89

clear services command SBR-61

clear ssh command SR-222

clear tcp pcb command IR-430

clear tcp statistics command IR-432

clear udp statistics command IR-434

client authentication list command SR-155

clock read-calendar command SMR-76

clock set command SMR-78

clock source (SONET) command HR-266

clock source (T1/E1 controller) command HR-342

clock source (T3/E3 controller) command HR-344

clock summer-time command SMR-80

clock timezone command SMR-82

clock update-calendar command SMR-86

codecs command SBR-63

collector command HR-643

commit command SMR-113

community is-empty command RR-979

community matches-any command RR-980

community matches-every command RR-982

community-set command RR-984

complete command SBR-64

config-register command SMR-34

configure command SMR-116

congestion-cleared command SBR-65

congestion-threshold command SBR-66

connect-source command MCR-240

control-address aaa command SBR-68

control-address h248 (SBE) command SBR-69

control disable command SMR-277

controller (SONET) command HR-267

controller dwdm command HR-404

controller e1 command HR-346

controller e3 command HR-348

controllers fabric plane shutdown command HR-135, HR-137

controllers fabric statistics collection command HR-138

controller t1 command HR-350

controller t3 command HR-352

copy access-list ipv4 command IR-6

copy access-list ipv6 command IR-8

copy command SMR-244

copy prefix-list ipv4 command IR-404

copy prefix-list ipv6 command IR-406

cost (OSPF) command RR-582

cost (OSPFv3) command RR-740

crc (serial) command HR-554

crc command (POS) HR-464

critical-alarm-threshold command SBR-71

crypto ca authenticate command SR-189

crypto ca cancel-enroll command SR-191

crypto ca enroll command SR-192

crypto ca trustpoint command SR-194

crypto ipsec chkpt-disabled command SR-157

crypto ipsec profile command SR-158

crypto ipsec security-association lifetime command SR-160

crypto ipsec transform-set command SR-162

crypto ipsec transport command SR-165

crypto isakmp chkpt-disabled command SR-112

crypto isakmp client configuration group command SR-113

crypto isakmp enable command SR-115

crypto isakmp identity command SR-116

crypto isakmp keepalive command SR-118

crypto isakmp key command SR-120

crypto isakmp policy command SR-122

crypto key generate dsa command SR-196

crypto key generate rsa command SR-198

crypto key pubkey-chain rsa command SR-125

crypto key zeroize dsa command SR-200

crypto key zeroize rsa command SR-201

csnp-interval command RR-398

D

dampening command HR-432

database-filter all out (OSPF) command RR-584

database-filter all out (OSPFv3) command RR-742

databits command SMR-790

datasize request command SMR-279

dbe-location-id command SBR-72

deact-mode command SBR-74

dead-interval (OSPF) command RR-586

dead-interval (OSPFv3) command RR-744

deadtime (server-group configuration) command SR-21

default-cost (OSPF) command RR-588

default-cost (OSPFv3) command RR-746

default-information command RR-322

default-information originate (BGP) command RR-86

default-information originate (IS-IS) command RR-400

default-information originate (OSPF) command RR-590

default-information originate (OSPFv3) command RR-748

default-information originate (RIP) command RR-913

default-metric (BGP) command RR-88

default-metric (EIGRP) command RR-323

default-metric (OSPF) command RR-592

default-metric (OSPFv3) command RR-750

default-metric (RIP) command RR-914

default-originate command RR-89

default-peer command MCR-242

default-route command MPR-6

delay trigger command HR-269

delete command SMR-249

delete community command RR-986

delete extcommunity rt command RR-988

demand-circuit (OSPF) command RR-594

demand-circuit (OSPFv3) command RR-752

deny (IPv4) command IR-10

deny (IPv6) command IR-19

deny (prefix-list) command IR-408

description (AAA) command SR-23

description (BGP) command RR-91

description (IKE policy) command SR-127

description (interface) command SMR-119

description (IPSec profile) command SR-167

description (peer) command MCR-244

description (trustpoint) command SR-203

description command SBR-76

destination address (IP SLA) command SMR-281

destination address ipv4 command MPR-322

destination command HR-645, MPR-198

destination in command RR-990

destination port command SMR-283

device command SMR-378

dhcp relay information check disable command IR-174

dhcp relay information option command IR-176

dhcp relay information policy command IR-178

dhcp server command IR-180

diagnostic load command HR-4

diagnostic schedule command HR-6

diagnostic start command HR-8

diagnostic stop command HR-10

diagnostic unload command HR-11

dir command SMR-251

direction (GMPLS) command MPR-196

disable (explicit-path) command MPR-200

disable (IS-IS) command RR-402

disabled command SBR-78

disable-dn-bit-check command RR-596

disconnect-character command SMR-793

disconnect command SMR-792

discovery hello command MPR-7

discovery targeted-hello command MPR-9

discovery transport-address command MPR-11

distance (EIGRP) command RR-325

distance (ISIS) command RR-403

distance admin-distance (RIP) command RR-916

distance bgp command RR-92

distance ospf command RR-599

distance ospfv3 command RR-754

distributed speaker command RR-94

distribute-list command RR-601

distribute-list prefix-list in command RR-756

distribute-list prefix-list out command RR-758

distribution count command SMR-285

distribution interval command SMR-287

dmz-link-bandwidth command RR-95

do command SMR-121

domain-id command RR-603

domain ipv4 host command IR-187

domain ipv6 host command IR-188

domain list command IR-189

domain lookup disable command IR-191

domain-name command IR-193

domain name-server command IR-195

domain tag command RR-604

dot1q native vlan command HR-540

dot1q vlan command HR-542

drop command RR-992

dr-priority command MCR-90

dsc location command HR-12

dscp command HR-647, SBR-81

dsc serial command HR-14

dst-adjacency command SBR-79

dsu bandwidth command HR-354

dsu mode command HR-356

dsu remote command HR-358

dtmf-duration command SBR-83

dtmf-relay command SBR-84

dumpcore command SMR-527

duplex (Management Ethernet) command HR-454

duplex full command HR-516

E

early-media-deny command SBR-86

early-media-direction command SBR-88

early-media-timeout command SBR-90

ebgp-multihop command RR-97

echo disable-vendor-extension command MPR-367

echo revision command MPR-368

edit command RR-994, SBR-92

embedded-rp command MCR-92

embedded-rp disable command MCR-95

encapsulation (global) command HR-434

encapsulation hdlc command (POS) HR-466

encapsulation hdlc command (serial) HR-556

encapsulation ppp command HR-468

encryption (IKE policy) command SR-128

end command SMR-123

end-policy command RR-996

end-set command RR-997

end-template command SMR-125

enrollment retry count command SR-204

enrollment retry period command SR-206

enrollment url command SR-208

entry command SBR-94

env disable command HR-16

env power-supply command HR-18

erase nvram command SMR-253

escape-character command SMR-795

exception dump-tftp-route command SMR-530

exception filepath command SMR-532

exception kernel memory command SMR-536

exception pakmem command SMR-539

exception sparse command SMR-541

exception sprsize command SMR-543

exec-timeout command SMR-797

exit command SMR-127

explicit-null command MPR-13

explicit-tracking command MCR-15

exporter command HR-649

export route-policy command RR-99

export route-target command RR-100

extcommunity rt is-empty command RR-999

extcommunity rt matches-any command RR-1000

extcommunity rt matches-every command RR-1002

extcommunity-set cost command RR-1004

extcommunity-set rt command RR-1006

extcommunity-set soo command RR-1007

extcommunity soo is-empty command RR-1008

extcommunity soo matches-any command RR-1009

extcommunity soo matches-every command RR-1011

F

facility-alarm contacts command HR-20

fast-register disable command SBR-96

fast-register-interval command SBR-98

fast-reroute command MPR-201

fault manager environment command SMR-210

fault manager policy command SMR-212, SMR-215

fault manager schedule-policy suspend command SMR-216

fault manager user-lib-directory command SMR-218

fault manager user-policy-directory command SMR-220

fdl ansi command HR-359

file-size command SMR-379

filter command SMR-289

first-cac-scope command SBR-100

first-cac-table command SBR-102

first-call-routing-table command SBR-103

first-number-analysis-table command SBR-104

first-reg-routing-table command SBR-105

flooding-igp (GMPLS) command MPR-203

flooding thresholds command MPR-205

flood-reduction (OSPF) command RR-605

flood-reduction (OSPFv3) command RR-760

flow command HR-651

flow-control command HR-520

flowcontrol hardware command SMR-799

flow exporter-map command HR-653

flow exporter map configuration submode HR-653

flow monitor-map command HR-655

flow monitor map configuration submode HR-655

follow command SMR-545

force command HR-270

format command SMR-254

forward-protocol udp command IR-436

framing (E1) command HR-361

framing (E3) command HR-363

framing (SONET) command HR-272

framing (T1) command HR-365

framing (T3) command HR-367

frequency (IP SLA) command SMR-291

frequency command SMR-380

fsck command SMR-256

ftp client anonymous-password command IR-197

ftp client passive command IR-198

ftp client source-interface command IR-200

G

g709 disable command HR-408

g709 fec command HR-406

g709 odu report command HR-409

g709 odu threshold command HR-412

g709 otu report command HR-410

g709 otu threshold command HR-414

graceful-restart (OSPFv3) command RR-762

graceful-restart command MPR-15

group (IKE policy) command SR-130

group command SR-25

H

h248 allow-all-mg command SBR-106

half-duplex command HR-518

hash (IKE policy) command SR-132

hello-interval (EIGRP) command RR-327

hello-interval (IS-IS) command RR-405

hello-interval (Multicast) command MCR-96

hello-interval (OSPF) command RR-607

hello-interval (OSPFv3) command RR-764

hello-multiplier command RR-407

hello-padding command RR-409

hello-password accept command RR-413

hello-password command RR-411

history command SMR-293

hold-time (EIGRP) command RR-328

holdtime command MPR-18

hostname command SMR-129

hostname dynamic disable command RR-415

hsrp authentication command IR-230

hsrp ipv4 command IR-232

hsrp mac-address command IR-234

hsrp preempt command IR-236

hsrp priority command IR-238

hsrp redirects command IR-240

hsrp timers command IR-242

hsrp track command IR-244

hsrp use-bia command IR-247

http server command SMR-426

hw-module boot override command HR-22

hw-module location (Cisco CRS-1) command HR-24

hw-module location (Cisco XR 12000 Series Router) command HR-26

hw-module port command HR-28

hw-module power command HR-30

hw-module power disable command HR-32

hw-module qos account layer2 encapsulation command MCR-171

hw-module qos multicast command MCR-173

hw-module qos multicast priorityq disable command MCR-175

hw-module qos queue-auto-defrag command MCR-176

hw-module reset auto command HR-34

hw-module reset auto disable command HR-36

hw-module shutdown command HR-37

hw-module subslot cardtype command HR-368

hw-module subslot power-cycle command HR-39

hw-module subslot reload command HR-40

hw-module subslot shutdown command HR-41

I

icmp ipv4 rate-limit unreachable command IR-298

if command RR-1013

ignore lsa mospf command RR-609

ignore-lsp-errors command RR-417

igp sync delay command MPR-21

import route-policy command RR-102

import route-target command RR-103

index (explicit path) command MPR-207

inherit taskgroup command SR-27

inherit usergroup command SR-29

install abort SMR-699

install activate SMR-701

install add command SMR-705

install attach command SMR-709

install commit command SMR-711

install deactivate command SMR-713

install log-history size command SMR-717

install remove command SMR-719

install resume command SMR-722

install rollback to command SMR-724

install suspend command SMR-727

install verify command SMR-729

instance command RR-766

interface (global) command HR-436

interface (HSRP) command IR-249

interface (IS-IS) command RR-419

interface (MPLS LDP) command MPR-19

interface (NTP) command SMR-443

interface (OSPF) command RR-610

interface (OSPFv3) command RR-768

interface (RIP) command RR-918

interface (VLAN) command HR-544

interface (VRRP) command IR-476

interface all enable command MCR-178

interface all router disable (IGMP/MLD) command MCR-17

interface Bundle-Ether command HR-586

interface Bundle-POS command HR-587

interface MgmtEth command HR-456

interface null 0 command HR-570

interface pos command HR-470

interface serial command HR-558

interface tunnel-te command MPR-209

invert command HR-562

ipcc routed command MPR-324

ip precedence command SBR-107

ipsla key-chain command SMR-295

ipsla low-memory command SMR-297

ipsla operation command SMR-298

ipsla reaction operation command SMR-299

ipsla reaction trigger command SMR-300

ipsla responder command SMR-302

ipsla schedule operation command SMR-303

ip TOS command SBR-108

show pim MCR-147

ipv4 access-group command IR-25

ipv4 access-list command IR-27

ipv4 access-list log-update rate command IR-29

ipv4 access-list log-update threshold command IR-30

ipv4 access-list maximum ace threshold command IR-32

ipv4 access-list maximum acl threshold command IR-34

ipv4 address command IR-300, SBR-110

ipv4 bgp policy accounting command IR-109

ipv4 command SBR-111

ipv4 conflict-policy command IR-302

ipv4 directed-broadcast command IR-304

ipv4 helper-address command IR-306

ipv4 mask-reply command IR-308

ipv4 mtu command IR-309

ipv4 prefix-list command IR-411

ipv4 redirects command IR-311

ipv4 source-route command IR-312

ipv4 unnumbered (interface) command MPR-211

ipv4 unnumbered command IR-313

ipv4 unreachables disable command IR-315

ipv4 verify unicast source reachable-via command IR-111

ipv4 virtual address command IR-317

ipv6 access-group command IR-36

ipv6 access-list command IR-38

ipv6 access-list log-update rate command IR-41

ipv6 access-list log-update threshold command IR-42

ipv6 access-list maximum ace threshold command IR-44

ipv6 access-list maximum acl threshold command IR-46

ipv6 address command IR-319

ipv6 address link-local command IR-321

ipv6 conflict-policy command IR-323

ipv6 enable command IR-324

ipv6 hop-limit command IR-326

ipv6 icmp error-interval command IR-327

ipv6 mtu command IR-329

ipv6 nd dad attempts command IR-331

ipv6 nd managed-config-flag command IR-334

ipv6 nd ns-interval command IR-336

ipv6 nd other-config-flag command IR-338

ipv6 nd prefix command IR-340

ipv6 nd ra-interval command IR-343

ipv6 nd ra-lifetime command IR-345

ipv6 nd reachable-time command IR-347

ipv6 nd redirects command IR-349

ipv6 nd suppress-ra command IR-350

ipv6 neighbor command IR-352

ipv6 prefix-list command IR-413

ipv6 unreachables disable command IR-355

ipv6 verify unicast source reachable-via any command IR-113

isakmp authorization list command SR-168

ispf command RR-421

ispf startup-delay command RR-422

is-type command RR-422

J

join-group command MCR-18

join-prune-interval command MCR-98

K

keepalive command (POS) HR-472

keepalive command (serial) HR-560

key (key chain) command SR-272

key chain command SR-273

key command SBR-113, SR-134

key-string (IKE) command SR-136

key-string (key chain) command SR-274

L

label accept command MPR-23

label advertise command MPR-25

label allocate command MPR-28

label-allocation-mode command RR-105

lacp period short command HR-588

lacp system-priority command HR-589

ldr-check command SBR-114

led mode command HR-43

length command SMR-801

life command SMR-305

lifetime (IKE policy) command SR-138

line command SMR-803

lines

fractional data HR-346, HR-350

lives command SMR-306

lmp hello (GMPLS) command MPR-212

lmp neighbor command MPR-326

load command SMR-130

load commit changes command SMR-132

load configuration failed command SMR-133

load interval command SMR-772

load rollback changes command SMR-135

local address command SBR-115

local-as command RR-106

locale country command SMR-87

locale language command SMR-89

local-id host command SBR-116

local-port command SBR-117

location (drp) command SMR-204

location (sdr) command SMR-614

location-id command SBR-118

lockout command HR-273

log adjacency changes (IS-IS) command RR-424

log adjacency changes (OSPF) command RR-612

log adjacency changes (OSPFv3) command RR-770

logging archive command SMR-383

logging buffered command SMR-385

logging console command SMR-387

logging correlator apply-rule command SMR-9

logging correlator buffer-size command SMR-11

logging correlator rule command SMR-13

logging events buffer-size command SMR-15

logging events level command SMR-17

logging events link-status SMR-389, SMR-390

logging events threshold command SMR-19

logging facility command SMR-393

logging history command SMR-395

logging history size command SMR-397

logging hostnameprefix command SMR-399

logging monitor command SMR-402

logging on command SMR-404

logging source-interface command SMR-406

logging suppress duplicates command SMR-408

logging trap command SMR-410

log graceful-restart command MPR-30

login authentication command SR-31

log-neighbor-changes command RR-332

log neighbor command MPR-32

log-neighbor-warnings command RR-333

log pdu drops command RR-426

log session-protection command MPR-34

loopback (DWDM) command HR-416

loopback (SONET) command HR-275

loopback (T1/E1) command HR-370

loopback (T3/E3) command HR-372

loopback (TenGigE) command HR-527

lsp-gen-interval command RR-427

lsp-interval command RR-429

lsp-mtu command RR-431

lsp-password accept command RR-435

lsp-password command RR-433

lsp-refresh-interval command RR-437

lsr-path command SMR-308

M

mac-accounting command HR-529

mac-address (Management Ethernet) command HR-458

mac-address command HR-531

major-alarm-threshold command SBR-119

man command SMR-137

manual command HR-276

marking command SBR-121

master command SMR-445

match (GMPLS) command MPR-214

match access-group command QR-12

match-account command SBR-122

match-address command SBR-124

match-adjacency command SBR-126

match any command QR-14

match cos command QR-16

match discard-class command QR-20

match dscp command QR-20

match mpls experimental topmost command QR-23

match-number command SBR-128

match precedence command QR-25

match-prefix command SBR-130

match protocol command QR-27

match qos-group command QR-29

match transform-set command SR-170

match-type command SBR-132

match-value command SBR-134

match vlan command QR-31

max-associations command SMR-447

max-bandwidth command SBR-136

max-call-rate command SBR-138

max-channels command SBR-139

maximum autorp command MCR-100

maximum external-sa command MCR-246

maximum group-mappings command MCR-102

maximum groups command MCR-20

maximum groups per-interface command MCR-23

maximum hops command SMR-310

maximum interfaces (OSPF) command RR-615

maximum interfaces (OSPFv3) command RR-771

maximum interfaces command MPR-36

maximum path (Static) command RR-1168

maximum-paths (BGP) command RR-108

maximum-paths (EIGRP) command RR-334

maximum paths (IP SLA) command SMR-312

maximum-paths (IS-IS) command RR-439

maximum-paths (OSPF) command RR-617

maximum paths (OSPFv3) command RR-772

maximum-paths (RIP) RR-920

maximum peer-external-sa command MCR-248

maximum-prefix (BGP) command RR-110

maximum-prefix (EIGRP) command RR-335

maximum prefix (RIB) command RR-864

maximum-redistributed-prefixes (IS-IS) command RR-440

maximum redistributed-prefixes (OSPF) command RR-618

maximum redistributed-prefixes (OSPFv3) command RR-773

maximum register-states command MCR-104

maximum route-interfaces command MCR-105

maximum routes command MCR-106

max-lsp-lifetime command RR-441

max-metric command RR-613

max-num-calls command SBR-140

max-reg-rates command SBR-141

max-regs-rate command SBR-142

max-updates command SBR-143

mdl command HR-374

med command RR-1018

media-address command SBR-144

media-bypass command SBR-145

media-timeout command SBR-146

mesh-group (IS-IS) command RR-443

mesh-group (peer) command MCR-250

message-digest-key command RR-620

metric command RR-445

metric maximum-hops command RR-337

metric-style narrow command RR-447

metric-style transition command RR-449

metric-style wide command RR-451

metric weights command RR-338

metric-zero-accept command RR-921

mhost default-interface command MCR-180

mhost ipv4 default-interface command IR-357

mhost ipv6 default-interface command IR-359

minor-alarm-threshold command SBR-147

mkdir command SMR-257

mode command HR-376

monitor controller fabric command SMR-470

monitor controller SONET command SMR-472

monitor interface command SMR-474

monitor processes command SMR-553

monitor threads command SMR-557

more command SMR-140

mpls ip-ttl-propagate command MPR-154

mpls label range command MPR-155

mpls ldp restart session command MPR-37

mpls ldp sync (OSPF) command RR-623

mpls oam command MPR-369

mpls traffic-end multicast-intact command RR-457

mpls traffic-eng area (OSPF) command RR-624, RR-626

mpls traffic-eng area command MPR-216

mpls traffic-eng command RR-455

mpls traffic-eng ds-te bc-model command MPR-218

mpls traffic-eng ds-te mode command MPR-220

mpls traffic-eng ds-te te-classes command MPR-222

mpls traffic-eng fast-reroute promote command MPR-224

mpls traffic-eng fast-reroute timers promotion command MPR-225

mpls traffic-eng interface command MPR-227

mpls traffic-eng level command MPR-229

mpls traffic-eng link-management flood command MPR-231

mpls traffic-eng link-management timers bandwidth-hold command MPR-232

mpls traffic-eng link-management timers periodic-flooding command MPR-234

mpls traffic-eng lmp router-id command MPR-236

mpls traffic-eng maximum tunnels command MPR-238

mpls traffic-eng path-protection switchover (GMPLS) command MPR-239

mpls traffic-eng path-selection metric command MPR-240

mpls traffic-eng reoptimize command MPR-242

mpls traffic-eng reoptimize timers delay command MPR-243

mpls traffic-eng router-id (IS-IS) command RR-459

mpls traffic-eng router-id (OSPF) command RR-627

mpls traffic-eng router-id command MPR-245

mpls traffic-eng signalling advertise explicit-null command MPR-247

mpls traffic-eng topology holddown sigerr command MPR-248

mrinfo command MCR-280

mtrace command MCR-282

mtu command HR-438

mtu-ignore (OSPF) command RR-629

mtu-ignore (OSPFv3) command RR-775

multicast-routing command MCR-182

multicast ttl-threshold command MCR-184

multipath command MCR-186

N

named-key command SR-140

nat-enable command SBR-148

national bits (E1) command HR-378

national bits (E3) command HR-379

neighbor (BGP) command RR-112

neighbor (EIGRP) command RR-340

neighbor (OSPF) command RR-631

neighbor (OSPFv3) command RR-777

neighbor (RIP) command RR-922

neighbor-check-on-recv disable command MCR-107

neighbor-check-on-send disable command MCR-108

neighbor command MPR-328

neighbor database-filter all out command RR-633

neighbor-filter command MCR-109

neighbor-group command RR-114

neighbor implicit-withdraw command MPR-37

neighbor maximum-prefix command RR-342

neighbor password command MPR-5, MPR-38

neighbor targeted command MPR-40

net command RR-461

netflow

flow exporter map configuration submode HR-653

flow monitor map configuration submode HR-655

sampler map configuration submode HR-662

network (BGP) command RR-116

network (OSPF) command RR-635

network (OSPFv3) command RR-779

network backdoor command RR-118

network-id command SBR-149

next-hop in command RR-1020

next-hop-self command RR-120

next-hop-self disable command RR-345

next-hop-unchanged command RR-122

nsf (IS-IS) command RR-463

nsf (OSPF) command RR-637

nsf (RIP) command RR-924

nsf command MCR-187

nsf interface-expires command RR-465

nsf interface-timer command RR-467

nsf interval (OSPF) command RR-639

nsf lifetime (IGMP/MLD) command MCR-26

nsf lifetime (IS-IS) command RR-469

nsf lifetime (OSPF) command RR-640

nsf lifetime (PIM) command MCR-110

nssa (OSPF) command RR-641

nssa (OSPFv3) command RR-781

ntp clear command SMR-450

ntp command SMR-448

O

old-register-checksum command MCR-112

oom-handling command MCR-189

options command HR-657

orf prefix in command RR-1022

originator-id command MCR-252

origin is command RR-1024

ospf name-lookup command RR-643

ospfv3 name-lookup command RR-783

output-delay command RR-925

overhead (SONET) command HR-278

overhead (SONET path) command HR-280

P

Packet HR-463

packet count command SMR-314

packet-gap non-standard command HR-533

packet interval command SMR-316

packet-size command RR-644

pair (SDR) command SMR-207, SMR-619

pair command SMR-618

pairing (drp) command SMR-206, SMR-620

parity command SMR-805

pass command RR-1026

passive (GMPLS) command MPR-250

passive (IS-IS) command RR-471

passive (OSPF) command RR-646

passive (OSPFv3) command RR-784

passive command MPR-329

passive-interface (EIGRP) command RR-346

passive-interface (RIP) command RR-926

password (AAA) command SR-33

password (BGP) command RR-126

password-disable command RR-128

path (SONET) command HR-282

path-option command MPR-251

path-selection metric command MPR-253

pause command SBR-150

peer (NTP) command SMR-451

peer command MCR-254

performance-mgmt apply monitor command SMR-479

performance-mgmt apply statistics command SMR-482

performance-mgmt apply thresholds command SMR-485

performance-mgmt resources memory command SMR-488

performance-mgmt resources tftp-server command SMR-490

performance-mgmt statistics command SMR-492

performance-mgmt thresholds command SMR-494

permit (IPv4) command IR-48

permit (IPv6) command IR-57

permit (prefix-list) command IR-415

ping (administration EXEC) command HR-45

ping (network) command IR-202

ping mpls command MPR-370

placement command SMR-565

placement program command SMR-563

point-to-point command RR-473

poison-reverse command RR-928

police command QR-33

policy map command QR-36

port IR-293

port command SBR-152

pos command HR-474

ppp authentication command HR-476

ppp chap password command HR-479

ppp chap refuse command HR-481

ppp max-bad-auth command HR-483

ppp max-configure command HR-485

ppp max-failure command HR-487

ppp max-terminate command HR-489

ppp ms-chap password command HR-491

ppp ms-chap refuse command HR-493

ppp pap refuse command HR-494

ppp pap sent-username password command HR-496

ppp timeout authentication command HR-498

ppp timeout retry command HR-500

prefix command SBR-153

prefix-set command RR-1028

prepend as-path command RR-1030

priority (IS-IS) command RR-474

priority (MPLS TE) command MPR-255

priority (OSPF) command RR-648

priority (OSPFv3) command RR-786

priority (QoS) command QR-38

priority command SBR-154

process command SMR-567

process core command SMR-570

process mandatory command SMR-572

profile command SR-172

propagate level command RR-476

protocol command RR-1032

proxy-arp command IR-86

pwd command SMR-259

Q

qos fax command SBR-156

qos video command SBR-157

qos voice command SBR-158

query-interval command MCR-28

query-max-response-time command MCR-30

query-timeout command MCR-32

query url command SR-210

queue-limit command QR-40

R

radius command SBR-159

radius-server dead-criteria time command SR-35

radius-server dead-criteria tries command SR-37

radius-server deadtime command SR-39

radius-server host command SR-41

radius-server key command SR-44

radius-server retransmit command SR-46

radius-server timeout command SR-47

radius source-interface command SR-48

random 1 out-of command HR-659

random-detect command QR-42

random-detect discard-class command QR-44

random-detect dscp command QR-46

random-detect exp command QR-49

random-detect precedence command QR-51

range (OSPF) command RR-650

range (OSPFv3) command RR-788

rcp client source-interface command IR-205

rcp client username command IR-207

rd command RR-130

rd in command RR-1034

rd-set command RR-1035

react command SMR-318

receive-buffer-size command RR-132

receive version command RR-930

record command HR-660

record route command MPR-257

recurring command SMR-321

redistribute (BGP) command RR-134

redistribute (EIGRP) command RR-347

redistribute (IS-IS) command RR-478

redistribute (OSPF) command RR-652

redistribute (OSPFv3) command RR-790

redistribute (RIP) command RR-931

redistribute maximum-prefix command RR-349

redundancy reddrv command HR-49

redundancy switchover command HR-51

reload (exec) command SMR-36

reload location command SMR-38

remark (IPv4) command IR-62

remark (IPv6) command IR-64

remark (prefix-list) command IR-418

remote (GMPLS) command MPR-258

remote-address ipv4 command SBR-161

remote-as (BGP) command RR-138

remote-as (multicast) command MCR-256

remote interface-id command MPR-331

remote node-id command MPR-332

remove-private-as command RR-140

report (SONET) command HR-284

report (SONET path) command HR-286

resend command SBR-162

resequence access-list ipv4 command IR-66

resequence access-list ipv6 command IR-68

resequence prefix-list ipv4 command IR-420

resequence prefix-list ipv6 command IR-422

resume command SMR-807

retain route-target command RR-142

retransmit-interval (IS-IS) command RR-481

retransmit-interval (OSPF) command RR-656

retransmit-interval (OSPFv3) command RR-794

retransmit-throttle-interval command RR-483

revert command HR-288

RFC 1406, Definitions of Managed Objects for DS1 and E1 Interface Types HR-382, HR-389

RFC 1407, DS3 MIB Variables HR-385, HR-395

rib-has-route command RR-1037

rmdir command SMR-260

rollback configuration command SMR-144

route-has-label command RR-1038

route-policy (BGP) command RR-144

route-policy (EIGRP) command RR-351

route-policy (RIP) command RR-936

route-policy (RPL) command RR-1039

router bgp command RR-148

router command MCR-34

route-reflector-client RR-146

router eigrp command RR-352

router hsrp command IR-251

router-id (EIGRP) command RR-353

router-id (global) command IR-361

router-id (MPLS LDP) command MPR-41

router-id (MPLS O-UNI) command MPR-333

router-id (OSPF) command RR-658

router-id (OSPFv3) command RR-796

router igmp command MCR-36

router isis command RR-485

router mld command MCR-38

router ospf command RR-660

router ospfv3 command RR-798

router pim command MCR-114

router rip command RR-934

router static command RR-1170

router vrrp command IR-478

route-type is command RR-1041

rp-address command MCR-116

rpf hash MCR-147

rpf-vector command MCR-118

rpl editor command RR-1043

rpl maximum command RR-1044

rp mgmtethernet forwarding command IR-115

rsakeypair command SR-212

rtp payload-type nte SBR-163

rx-los-threshold command HR-417

S

sa-filter command MCR-257

sam add certificate command SR-248

sam delete certificate command SR-250

sampler-map command HR-662

sampler map configuration submode HR-662

samples command SMR-322

sam prompt-interval command SR-252

sam verify command SR-254

sap cache-timeout command MCR-284

sap listen command MCR-285

save configuration command SMR-146

save configuration commit changes command SMR-148

save configuration failed command SMR-150

save configuration merge command SMR-152

save configuration removed command SMR-154

save rollback changes command SMR-156

scramble command HR-563

scrambling disable (SONET path) command HR-290

sdr command SMR-617

secret command SR-48

send-buffer-size command RR-149

send command SMR-809

send-community-ebgp command RR-151

send-extended-community-ebgp command RR-153

send-lifetime command SR-276

send version command RR-938

serial command HR-565

server (NTP) command SMR-454

server (RADIUS) command SR-52

server (TACACS+) command SR-54

service-policy (interface) command QR-53

service-policy (policy-map class) command QR-55

service tcp-small-servers command IR-438

service timestamps command SMR-412

service udp-small-servers command IR-440

session-group command RR-155

session-limit command SMR-811

session-open-mode command RR-157

session protection command MPR-43

session-timeout command SMR-812

set atm-clp command QR-57

set-attached-bit command RR-487

set community command RR-1046

set cos command QR-58

set cost command RR-1048

set dampening command RR-1049

set default-afi command SMR-158

set default-safi command SMR-160

set default-vfr command SMR-162

set discard-class command QR-60

set dscp command QR-62

set eigrp-metric command RR-1051

set extcommunity cost command RR-1053

set extcommunity rt command RR-1055

set label command RR-1058

set level command RR-1059

set local-preference command RR-1060

set med command RR-1062

set metric-type (IS-IS) command RR-1064

set metric-type (OSPF) command RR-1065

set mpls experimental command QR-64

set next-hop command RR-1067

set origin command RR-1069

set ospf-metric command RR-1070

set-overload-bit command RR-489

set pfs command SR-174

set precedence command QR-66

set qos-group command QR-68

set rib-metric command RR-1071

set rip-metric command RR-1072

set rip-tag command RR-1073

set tag command RR-1074

set traffic-index command RR-1075

set type command SR-175

set weight command RR-1077

severity command SMR-414

sftp command SR-224

shape average command QR-70

show aaa command SR-56

show access-lists ipv4 command IR-70

show access-lists ipv6 command IR-74

show adjacency command IR-116

show aliases command SMR-167

show aps agents command HR-294

show aps command HR-291

show aps group command HR-296

show arm conflicts command IR-363

show arm database command IR-365

show arm registrations consumers routerid command IR-370

show arm registrations producers command IR-372

show arm router-ids command IR-368

show arm summary command IR-374

show arm vrf-summary command IR-376

show arp command IR-88

show auto-rp candidate-rp command MCR-119

show auto-rp mapping-agent command MCR-121

show bfd (BGP) command HR-616, HR-618

show bfd all command HR-618

show bfd client (BGP) command HR-620

show bfd counters packet (BGP) command HR-622

show bfd ipv4 command HR-624

show bfd location command HR-626

show bfd session command HR-627

show bgp advertised command RR-167

show bgp af-group command RR-173

show bgp attribute-key command RR-176

show bgp cidr-only command RR-180

show bgp command RR-159

show bgp community command RR-184

show bgp convergence command RR-189

show bgp count-only command RR-192

show bgp dampened-paths command RR-196

show bgp flap-statistics command RR-200

show bgp inconsistent-as command RR-205

show bgp neighbor-group command RR-209

show bgp neighbors command RR-213

show bgp paths command RR-228

show bgp policy command RR-230

show bgp process command RR-238

show bgp regexp command RR-253

show bgp route-policy command RR-257

show bgp session-group command RR-261

show bgp summary command RR-264

show bgp truncated-communities command RR-268

show bgp update-group command RR-272

show bgp vrf imported-routes command RR-277

show bundle Bundle-Ether command HR-590

show bundle Bundle-POS command HR-593

show calendar command SMR-456

show cdp command SMR-60

show cdp entry command SMR-62

show cdp interface command SMR-64

show cdp neighbors command SMR-67

show cdp traffic command SMR-71

show cef ipv4 adjacency command IR-121

show cef ipv4 adjacency hardware command IR-123

show cef ipv4 command IR-119

show cef ipv4 drop command IR-124

show cef ipv4 exact-route command IR-126

show cef ipv4 exceptions command IR-153

show cef ipv4 hardware command IR-130

show cef ipv4 interface bgp-policy-statistics command IR-133

show cef ipv4 interface command IR-131

show cef ipv4 non-recursive command IR-135

show cef ipv4 resources command IR-138

show cef ipv4 summary command IR-140

show cef ipv4 unresolved command IR-142

show cef ipv6 adjacency command IR-147

show cef ipv6 adjacency hardware command IR-149

show cef ipv6 command IR-144

show cef ipv6 drops command IR-150

show cef ipv6 exact-route command IR-152

show cef ipv6 exceptions command IR-153

show cef ipv6 hardware command IR-155

show cef ipv6 interface bgp-policy-statistics command IR-156

show cef ipv6 interface command IR-158

show cef ipv6 non-recursive command IR-160

show cef ipv6 resources command IR-162

show cef ipv6 summary command IR-164

show cef ipv6 unresolved command IR-166

show cef mpls adjacency command IR-168

show cef mpls unresolved command IR-170

show cef vrf command IR-171

show cinetd services command IR-209

show clns statistics command IR-377

show clock command SMR-91

show command SMR-164

show configuration (admin exec) command SMR-171

show configuration (config) command SMR-168

show configuration (exec) command SMR-173

show configuration changes command SMR-176

show configuration commit changes command SMR-178

show configuration commit history command SMR-181

show configuration commit list command SMR-184

show configuration failed (config) command SMR-187

show configuration failed startup command SMR-189

show configuration rollback command SMR-191

show context command SMR-574

show controller dwdm command HR-419

show controllers cpuctrl cdma command HR-187

show controllers cpuctrl clients command HR-190

show controllers cpuctrl devices command HR-193

show controllers cpuctrl internal command HR-196

show controllers cpuctrl ports command HR-199

show controllers cpuctrl summary command HR-202

show controllers e1 command HR-380

show controllers e3 command HR-383

show controllers egressq eio links command HR-205

show controllers egressq group command HR-207

show controllers egressq interface command HR-210

show controllers egressq port command HR-214

show controllers egressq queue command HR-216

show controllers egressq statistics command HR-219

show controllers fabric bundle command HR-141

show controllers fabric command HR-139

show controllers fabric connectivity command HR-143

show controllers fabric fgid statistics command HR-145

show controllers fabric plane command HR-148

show controllers fabricq drop command HR-152

show controllers fabricq errors command HR-156

show controllers fabricq frfab command HR-158

show controllers fabricq output command HR-161

show controllers fabricq queue command HR-166

show controllers fabricq registers command HR-169

show controllers fabricq statistics command HR-164

show controllers fabricq tofab command HR-172

show controllers ingressq statistics command HR-174, HR-222

show controllers null interface command HR-572

show controllers plim asic command HR-224

show controllers pos command HR-298

show controllers pse eio links command HR-229

show controllers pse ipc command HR-232

show controllers pse mp command HR-237

show controllers pse statistics command HR-242

show controllers pse summary command HR-248

show controllers sonet command HR-304

show controllers t1 command HR-387

show controllers t3 command HR-391

show crypto ca certificates command SR-213

show crypto ca crls command SR-215

show crypto ipsec sa command SR-176

show crypto ipsec summary command SR-179

show crypto isakmp key command SR-142

show crypto isakmp policy command SR-144

show crypto isakmp sa command SR-146

show crypto key mypubkey dsa command SR-216

show crypto key mypubkey rsa command SR-218

show crypto key pubkey-chain rsa command SR-149

show default-afi-safi-vrf command SMR-195

show diag command HR-53

show diagnostic content command HR-60

show diagnostic result command HR-62

show diagnostic schedule command HR-64

show diags command HR-57

show dll command SMR-577

show dsc command HR-66

show eigrp accounting command RR-354

show eigrp interfaces command RR-356

show eigrp topology command RR-362

show eigrp traffic command RR-365

show environment command HR-68

show explicit-paths command MPR-260

show facility-alarm contacts command HR-71

show fault manager environment command SMR-222

show fault manager metric hardware location command SMR-224

show fault manager metric process command SMR-226

show fault manager policy available command SMR-229

show fault manager policy registered command SMR-231

show fault manager statistics-table command SMR-234

show fault manager user-lib-directory command SMR-236

show fault manager user-policy-directory command SMR-237

show filesystem command SMR-262

show flow exporter command HR-664

show flow exporter-map command HR-667

show flow monitor command HR-670

show flow monitor-map command HR-689

show flow platform producer statistics location command HR-691

show fmgr command QR-72

show fmgr interface command HR-73

show fpd package command HR-76

show hosts command IR-211

show hsrp command IR-252

show hw-module fpd command HR-78

show hw-module qos multicast command MCR-190

show hw-module subslot brief command HR-80

show hw-module subslot config command HR-83

show hw-module subslot counters command HR-85

show hw-module subslot errors command HR-88

show hw-module subslot registers command HR-90

show hw-module subslot status command HR-92

show igmp groups command MCR-40

show igmp interface command MCR-42

show igmp nsf command MCR-45

show igmp summary MCR-47

show igmp traffic command MCR-49

show im dampening command HR-441

show install active command SMR-735

show install command SMR-732

show install committed command SMR-739

show install inactive command SMR-742

show install log command SMR-747

show install package command SMR-753

show install pie-info command SMR-756

show install requests command SMR-758

show install rollback command SMR-760

show install suspend command SMR-765

show install which command SMR-767

show interfaces command HR-444

show interfaces pos command HR-502

show inventory command HR-94

show ipsla application command SMR-324

show ipsla history command SMR-326

show ipsla responder statistics ports command SMR-328

show ipsla statistics aggregated command SMR-332

show ipsla statistics aggregated detail command SMR-337

show ipsla statistics command SMR-330

show ipsla statistics enhanced aggregated command SMR-339

show ipv4 interface command IR-379

show ipv4 traffic command IR-382

show ipv6 interface command IR-385

show ipv6 neighbors command IR-389

show ipv6 traffic command IR-392

show isis adjacency command RR-491

show isis adjacency-log command RR-494

show isis checkpoint adjacency command RR-496

show isis checkpoint interface command RR-498

show isis checkpoint lsp command RR-500

show isis database command RR-502

show isis database-log command RR-509

show isis hostname command RR-511

show isis interface command RR-513

show isis lsp-log command RR-517

show isis mesh-group command RR-520

show isis mpls traffic-eng adjacency-log command RR-522

show isis mpls traffic-eng advertisements command RR-524

show isis mpls traffic-eng tunnel command RR-527

show isis neighbors command RR-529

show isis protocol command RR-532

show isis route command RR-534

show isis spf-log command RR-536

show isis statistics command RR-542

show isis topology command RR-546

show key chain command SR-278

show lacp bundle command HR-596

show lacp counters command HR-599

show lacp port command HR-601

show lacp system-id command HR-604

show led command HR-97

show line command SMR-814

show logging correlator buffer command SMR-21

show logging correlator info command SMR-23

show logging correlator rule command SMR-25

show logging events buffer command SMR-27

show logging events info command SMR-31

show logging history command SMR-420

show lpts bindings command IR-260

show lpts clients command IR-264

show lpts flows command IR-266

show lpts ifib command IR-269

show lpts ifib slices command IR-272

show lpts ifib statistics command IR-275

show lpts ifib times command IR-277

show lpts mpa groups command IR-279

show lpts pifib command IR-281

show lpts pifib hardware entry command IR-286

show lpts pifib hardware usage command IR-289

show lpts pifib statistics command IR-291

show lpts vrf command IR-294

show mac-accounting command HR-534

show mbus command HR-99

show memory command SMR-582

show memory compare command SMR-585

show memory heap command SMR-588

show memory summary command SMR-595

show mfib counter command MCR-192

show mfib hardware interface command MCR-194

show mfib hardware route accept-bitmap command MCR-199

show mfib hardware route command MCR-197

show mfib hardware route olist command MCR-202

show mfib hardware route statistics command MCR-205

show mfib interface command MCR-208

show mfib nsf command MCR-211

show mfib route command MCR-213

show mhost default-interface command IR-395, MCR-217

show mhost groups command IR-396, MCR-219

show mld groups command MCR-52

show mld interface command MCR-54

show mld nsf command MCR-56

show mld summary command MCR-58

show mld traffic command MCR-60

show mpls forwarding command MPR-157

show mpls interfaces command MPR-161

show mpls label range command MPR-164

show mpls label table command MPR-165

show mpls ldp backoff command MPR-45

show mpls ldp bindings command MPR-47

show mpls ldp forwarding command MPR-54

show mpls ldp graceful-restart command MPR-56

show mpls ldp igp sync command MPR-58

show mpls ldp neighbor command MPR-60

show mpls ldp parameters command MPR-65

show mpls ldp statistics msg-counters command MPR-67

show mpls ldp summary command MPR-69

show mpls lmp clients command MPR-334

show mpls lmp interface-id command MPR-336

show mpls lsd applications command MPR-167

show mpls lsd clients command MPR-169

show mpls optical-uni checkpoint command MPR-340

show mpls optical-uni command MPR-338

show mpls optical-uni diagnostics command MPR-342

show mpls optical-uni interface command MPR-346

show mpls optical-uni lmp command MPR-349

show mpls optical-uni timers all command MPR-355

show mpls optical-uni timers global command MPR-357

show mpls optical-uni timers interfaces command MPR-359

show mpls optical-uni timers nodes command MPR-361

show mpls traffic-eng autoroute command MPR-262

show mpls traffic-eng counters tunnel command MPR-264

show mpls traffic-eng ds-te te-class command MPR-266

show mpls traffic-eng fast-reroute database command MPR-171

show mpls traffic-eng fast-reroute log command MPR-175

show mpls traffic-eng forwarding command MPR-268

show mpls traffic-eng link-management admission-control command MPR-270

show mpls traffic-eng link-management advertisements command MPR-272

show mpls traffic-eng link-management bandwidth-allocation command MPR-276

show mpls traffic-eng link-management bfd-neighbors command MPR-279

show mpls traffic-eng link-management igp-neighbors command MPR-281

show mpls traffic-eng link-management interface command MPR-283

show mpls traffic-eng link-management statistics command MPR-286

show mpls traffic-eng link-management summary command MPR-288

show mpls traffic-eng maximum tunnels command MPR-290

show mpls traffic-eng topology command MPR-292

show mpls traffic-eng tunnels command MPR-298

show mrib client command MCR-221

show mrib nsf command MCR-224

show mrib route command MCR-226

show msdp globals command MCR-259

show msdp peer command MCR-262

show msdp rpf command MCR-264

show msdp sa-cache command MCR-266

show msdp statistics peer command MCR-270

show msdp summary command MCR-272

show ntp associations command SMR-457

show ntp status command SMR-460

show ospf border-routers command RR-665

show ospf command RR-662

show ospf database command RR-667

show ospf flood-list command RR-678

show ospf interface command RR-680

show ospf mpls traffic-eng command RR-683

show ospf neighbor command RR-688

show ospf request-list command RR-694

show ospf retransmission-list command RR-697

show ospf route command RR-699

show ospf summary-prefix command RR-703

show ospfv3 border-routers command RR-803

show ospfv3 command RR-800

show ospfv3 database command RR-805

show ospfv3 flood-list command RR-816

show ospfv3 interface command RR-819

show ospfv3 neighbor command RR-822

show ospfv3 retransmission-list command RR-831

show ospfv3 route command RR-833

show ospfv3 summary-prefix command RR-835

show ospfv3 virtual-links command RR-837

show ospf virtual-links command RR-705

show ospv3 request-list command RR-828

show packet-memory command HR-251

show performance-mgmt bgp command SMR-502

show performance-mgmt interface command SMR-504

show performance-mgmt mpls command SMR-507

show performance-mgmt node command SMR-509

show pim bsr candidate-rp command MCR-123

show pim bsr election command MCR-125

show pim bsr rp-cache command MCR-127

show pim df election-state command MCR-129

show pim df winner command MCR-131

show pim group-map command MCR-133

show pim interface command MCR-135

show pim join-prune statistics command MCR-137

show pim neighbor command MCR-139

show pim nsf command MCR-141

show pim range-list command MCR-143

show pim rpf command MCR-145

show pim summary command MCR-149

show pim topology command MCR-151

show pim traffic command MCR-155

show pim tunnel info command MCR-157

show placement location command SMR-598

show placement policy command SMR-600

show placement program command SMR-604

show placement reoptimize command SMR-606

show platform command HR-102

show policy-map interface command QR-76

show ppp interfaces command HR-505

show prefix-list ipv4 command IR-423

show prefix-list ipv6 command IR-425

show processes command SMR-608

show protocols (BGP) command RR-279

show protocols (EIGRP) command RR-367

show protocols (IS-IS) command RR-549

show protocols (OSPF) command RR-707

show protocols (OSPFv3) command RR-839

show qos interface command QR-78

show radius accounting command SR-62

show radius authentication command SR-64

show radius client command SR-66

show radius command SR-60

show radius dead-criteria command SR-68

show radius server-groups command SR-70

show raw brief command IR-442

show raw detail pcb command IR-444

show raw extended-filters command IR-446

show raw statistics pcb command IR-448

show redundancy command HR-104

show rip command RR-939

show rip database command RR-941

show rip interface command RR-943

show rip statistics command RR-946

show route command RR-879

show route connected command RR-888

show route local command RR-890

show route longer-prefixes command RR-892

show route static command RR-896

show route summary command RR-898

show rpl active as-path-set command RR-1079

show rpl active community-set command RR-1082

show rpl active extcommunity-set command RR-1085

show rpl active prefix-set command RR-1090

show rpl active route-policy command RR-1088

show rpl as-path-set attachpoints command RR-1095

show rpl as-path-set command RR-1093

show rpl as-path-set references command RR-1098

show rpl community-set attachpoints command RR-1103

show rpl community-set command RR-1101

show rpl community-set references command RR-1105

show rpl extcommunity-set command RR-1108

show rpl inactive as-path-set command RR-1111

show rpl inactive community-set command RR-1114

show rpl inactive extcommunity-set command RR-1117

show rpl inactive prefix-set command RR-1120

show rpl inactive route-policy command RR-1123

show rpl maximum command RR-1126

show rpl prefix-set attachpoints command RR-1130

show rpl prefix-set command RR-1128

show rpl prefix-set references command RR-1133

show rpl route-policy attachpoints command RR-1139

show rpl route-policy command RR-1136

show rpl route-policy references command RR-1142

show rpl route-policy uses command RR-1145

show rpl unused as-path-set command RR-1148

show rpl unused community-set command RR-1151

show rpl unused extcommunity-set command RR-1154

show rpl unused prefix-set command RR-1156

show rpl unused route-policy command RR-1159

show rsvp counters command MPR-91

show rsvp counters oor command MPR-95

show rsvp counters prefix filtering command MPR-97

show rsvp fast-reroute command MPR-100

show rsvp graceful-restart command MPR-102

show rsvp hello instance command MPR-105

show rsvp hello instance interface-based command MPR-108

show rsvp interface command MPR-110

show rsvp neighbor command MPR-112

show rsvp request command MPR-113

show rsvp reservation command MPR-115

show rsvp sender command MPR-117

show rsvp session command MPR-120

show running-config command SMR-197

show running performance-mgmt command SMR-511

show sam certificate command SR-256

show sam crl command SR-260

show sam log command SR-262

show sam package command SR-264

show sampler-map command HR-693

show sam sysinfo command SR-267

show sap command MCR-286

show screddrv command HR-107

show services sbc sbe call-policy-set command SBR-164

show services sbc sbe call-policy-sets command SBR-166

show services sbc sbe call-policy-set-table entries command SBR-167

show services sbc sbe calls command SBR-168

show services sbc sbe call-stats command SBR-169

show services sbc sbe gates command SBR-171

show services sbc sbe media-gateway-associations command SBR-172

show services sbc sbe media-gateways command SBR-174

show services sbc sbe qos-profiles command SBR-175

show services sbc sbe radius-client-stats command SBR-176

show services sbc sbe radius-server-stats command SBR-177

show services sbc sbe vrf command SBR-179

show sessions command SMR-817

show snmp command SMR-622

show snmp engineID command SMR-625

show snmp group command SMR-626

show snmp host command SMR-628

show snmp mib command SMR-630

show snmp users command SMR-633

show snmp view command SMR-635

show ssh command SR-226

show ssh session details command SR-228

show ssl command SR-244

show system verify command SMR-513

show tacacs command SR-72

show tacacs server-groups command SR-74

show task supported command SR-76

show tcp brief command IR-450

show tcp detail command IR-452

show tcp extended-filters command IR-454

show terminal command SMR-819

show udp brief command IR-458

show udp statistics command IR-464

show user command SR-78

show users command SMR-821

show variables boot command SMR-40

show variables system command SMR-42

show version command HR-109

show vlan interface command HR-546

show vlan trunks command HR-549

show vrrp command IR-479

shutdown (BGP) command RR-281

shutdown (DWDM) command HR-424

shutdown (global) command HR-451

shutdown (IS-IS) command RR-552

shutdown (MSDP) command MCR-274

shutdown (SONET) command HR-311

shutdown (T1/E1) command HR-396

shutdown (T3/E3) command HR-397

signaling-address ipv4 command SBR-180

signaling-peer command SBR-182

signaling-peer-port command SBR-184

signaling-port command SBR-186

signalled-bandwidth command MPR-309

signalled-name command MPR-311

signalling command HR-312

signalling dscp (LDP) command MPR-71

signalling dscp (RSVP) command MPR-123

signalling graceful-restart command MPR-125

signalling graceful-restart restart-time command MPR-127

signalling hello graceful-restart interface-based command MPR-129

signalling hello graceful-restart refresh interval command MPR-130

signalling hello graceful-restart refresh misses command MPR-132

signalling prefix filtering access-list command MPR-133

signalling prefix filtering default-deny-action command MPR-135

signalling rate-limit command MPR-136

signalling refresh interval command MPR-138

signalling refresh missed command MPR-140

signalling refresh reduction bundle-max-size command MPR-142

signalling refresh reduction disable command MPR-143

signalling refresh reduction reliable command MPR-145

signalling refresh reduction summary command MPR-148

single-topology command RR-553

site-of-origin (EIGRP) command RR-369

site-of-origin (RIP) command RR-948

snmp-server chassis-id command SMR-636

snmp-server community command SMR-638

snmp-server community-map command SMR-640

snmp-server contact command SMR-642

snmp-server context command SMR-643

snmp-server enable traps mpls ldp command MPR-72

snmp-server engineID command SMR-644

snmp-server group command SMR-645

snmp-server host command SMR-648

snmp-server ifindex persist command SMR-652

snmp-server ifmib ifalias long command SMR-654

snmp-server interface command SMR-655

snmp-server location command SMR-657

snmp-server packetsize command SMR-658

snmp-server queue-length command SMR-659

snmp-server target list command SMR-660

snmp-server trap authentication vrf command SMR-661

snmp-server trap link ietf command SMR-663

snmp-server traps bgp command SMR-667

snmp-server traps command SMR-665

snmp-server traps ospf state-change neighbor-state-change command SMR-669

snmp-server trap-source command SMR-681

snmp-server traps pim interface-state-change command SMR-671

snmp-server traps pim invalid-message-received command SMR-673

snmp-server traps pim neighbor-change command SMR-675

snmp-server traps pim rp-mapping-change command SMR-677

snmp-server traps snmp command SMR-679

snmp-server traps syslog command SMR-668, SMR-670, SMR-683

snmp-server trap-timeout command SMR-685

snmp-server user command SMR-687

snmp-server view command SMR-690

snmp-server vrf command SMR-692

snmp traps mpls traffic-eng command MPR-312

socket-receive-buffer-size command RR-285

socket send-buffer-size command RR-287

soft-reconfiguration inbound command RR-289

source address command SMR-342

source command HR-695, SMR-462

source in command RR-1162

source port command SMR-344

speaker-id command RR-292

speed (DS0) command HR-398

speed (Management Ethernet) command HR-460

speed command HR-536

spf-interval command RR-555

spf prefix-priority RR-557

split-horizon disable (EIGRP) command RR-371

split-horizon disable (RIP) command RR-950

spt-threshold infinity command MCR-159

squeeze command SMR-264

ssh client knownhost command SR-232

ssh client source-interface command SR-234

ssh command SR-230

ssh server command SR-236

ssh server rate-limit command SR-239

ssh server session-limit command SR-240

ssh server v2 command SR-238

ssh timeout command SR-241

ssm command MCR-160

start-time command SMR-346

static-group command MCR-62

static-rpf command MCR-228

statistics command SMR-348

stopbits command SMR-823

stub (EIGRP) command RR-372

stub (OSPF) command RR-710

stub (OSPFv3) command RR-841

summary-address (EIGRP) command RR-374

summary-prefix (IS-IS) command RR-559

summary-prefix (OSPF) command RR-712

summary-prefix (OSPFv3) command RR-843

suppressed (IS-IS) command RR-561

suppress-route command RR-1164

switch-fabric service-policy command QR-80

switching (GMPLS) command MPR-314

switching endpoint (GMPLS) command MPR-316

switching transit (GMPLS) command MPR-318

T

table-policy command RR-293

tacacs-server host command SR-82

tacacs-server key command SR-84

tacacs-server timeout command SR-86

tacacs source-interface command SR-87

tag (IP SLA) command SMR-350

tag command RR-1165

task command SR-89

taskgroup command SR-91

tcp mss command IR-466

tcp path-mtu-discovery command IR-467

tcp selective-ack command IR-468

tcp synwait-time command IR-470

tcp timestamp command IR-471

tcp window-size command IR-473

telnet client source-interface command IR-216

telnet command IR-213

telnet server command IR-218

telnet transparent command IR-220

template command HR-697, SMR-200

terminal execl command SMR-825

terminal length command SMR-827

terminal monitor command SMR-422, SMR-829

terminal width command SMR-830

tftp client source-interface command IR-221

tftp server command IR-223

threshold (SONET) command HR-315

threshold (SONET path) command HR-317

threshold command SMR-352

threshold type average command SMR-354

threshold type consecutive command SMR-356

threshold type immediate command SMR-358

threshold type xofy command SMR-360

timeout command SMR-362

timeout login response command SR-93

timers (APS) command HR-313

timers (BGP) command RR-295

timers active-time command RR-376

timers basic command RR-952

timers bgp command RR-297

timers lsa arrival command RR-845

timers lsa group-pacing command RR-714

timers lsa min-arrival command RR-716

timers nsf route-hold (EIGRP) command RR-378

timers pacing flood command RR-847

timers pacing lsa-group command RR-849

timers pacing retransmission command RR-851

timers throttle lsa all (OSPF) command RR-717

timers throttle lsa-all (OSPFv3) command RR-853

timers throttle spf (OSPF) command RR-719

timers throttle spf (OSPFv3) command RR-855

timeslots command HR-399

tna ipv4 command MPR-363

tos command SMR-364

traceroute command IR-225

traceroute mpls command MPR-373

traceroute mpls multipath command MPR-376

transcode-deny command SBR-188

transcoder command SBR-189

transmit-delay (OSPF) command RR-721

transmit-delay (OSPFv3) command RR-857

transmit-delay (POS) command HR-508

transmit-delay (serial) command HR-566

transmit-power command HR-425

transport-command SBR-190

transport input command SMR-831

transport output command SMR-833

transport preferred command SMR-835

transport udp command HR-699

trusted-key command SMR-464

ttl-security command RR-299

ttl-threshold command MCR-276

tunnel source command SR-183

type icmp echo command SMR-366

type icmp path-echo command SMR-367

type icmp path-jitter command SMR-368

type udp echo command SMR-369

type udp ipv4 address command SMR-371

type udp jitter command SMR-370

U

undelete command SMR-266

uneq-shut (SONET path) command HR-319

unidirectional command HR-320

unsuppress route command RR-1166

update-source command RR-302

upgrade all command HR-112

upgrade cpuctrlbits command HR-114

upgrade fabric-downloader command HR-116

upgrade hw-module fpd command HR-117

upgrade mbus command HR-120

upgrade rommon (Cisco CRS-1) command HR-122

upgrade rommon (Cisco XR 12000 Series Router) command HR-124

use-any-local-port command SBR-191

use command RR-304

usergroup command SR-95

username command SR-97

users group command SR-99

V

validate-update-source disable command RR-954

variance command RR-380

verify-data command SMR-372

version command MCR-64

version v9 command HR-701

virtual-link (OSPF) command RR-723

virtual-link (OSPFv3) command RR-859

vrf (BGP) command RR-308

vrf (EIGRP) command RR-382

vrf (interface) command SBR-192

vrf (OSPF) command RR-725

vrf (RIP) command RR-955

vrf (Static Routes) command RR-1173

vrf command SBR-193

vrf vpn-id command SBR-195

vrrp assume-ownership command IR-483

vrrp ipv4 command IR-485

vrrp preempt command IR-487

vrrp priority command IR-489

vrrp text-authentication command IR-491

vrrp timer command IR-493

vrrp track interface command IR-495

vty-pool command SMR-837

W

wavelength command HR-427

weight command RR-309

width command SMR-839

X

xml agent corba command SMR-428

Y

yellow command HR-401