Cisco Unified Border Element Configuration Guide
Feature Information for Cisco UBE Management
Downloads: This chapterpdf (PDF - 38.0KB) The complete bookPDF (PDF - 4.0MB) | Feedback

Feature Information for Cisco UBE Management

Table Of Contents

Feature Information for Cisco UBE Management


Feature Information for Cisco UBE Management

Table 1 lists the release history for this chapter.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the Cisco IOS software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


Table 1 Feature Information for Cisco UBE Management Features 

Feature Name
Releases
Feature Information

SIP-to-SIP Extended Feature Functionality for Session Border Controllers

12.4(6)T

The SIP-to-SIP Extended Feature Functionality for Session Border Controllers (SBCs) enables the SIP-to-SIP functionality to conform with RFC 3261 to interoperate with SIP User Agents (UAs).

This feature inlcludes the following:

Media Inactivity timer based on RTP

This feature uses no new or modified commands.

Clearable SIP-UA Statistics

12.2(13)T
12.2(15)T
12.3(2)T

The Clearable SIP-US Statistics feature adds MIB support.

No commands or configurations were introduced or modified in this release.


Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2010 Cisco Systems, Inc. All rights reserved.