Cisco Unified Border Element Configuration Guide
Cisco Unified Border Element Management
Downloads: This chapterpdf (PDF - 52.0KB) The complete bookPDF (PDF - 4.0MB) | Feedback

Cisco Unified Border Element Management

Table Of Contents

Cisco Unified Border Element Management

Finding Feature Information

Configuration of Cisco UBE Management Features


Cisco Unified Border Element Management


Revised: October 20, 2010
First Published: November 25, 2009
Last Updated: October 20, 2010

This Cisco Unified Border Element is a special Cisco IOS software image that provides a network-to-network interface point for billing, security, call admission control, quality of service, and signaling interworking. This chapter describes basic gateway functionality, software images, topology, and summarizes supported features.


Activation Cisco Product Authorization Key (PAK)—A Product Authorization Key (PAK) is required to configure some of the features described in this guide. Before you start the configuration process, please register your products and activate your PAK at the following URL http://www.cisco.com/go/license.


Finding Feature Information

For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Cisco Unified Border Element Features Roadmap" section on page 3.

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Configuration of Cisco UBE Management Features

This chapter contains the following configuration topics:

Cisco UBE Prerequisites and Restrictions

Prerequisites for Cisco Unified Border Element

Restrictions for Cisco Unified Border Element

Monitoring the SIP Trunk

Out-of-dialog SIP OPTIONS

Protocol Monitoring

Media Inactivity timer based on RTP

The Clearable SIP-US Statistics feature adds MIB support.

Additional References,

Glossary

Feature Information for Cisco UBE Management