Cisco Unified Border Element Configuration Guide
SIP - Ability to Send a SIP Registration Message on a Border Element
Downloads: This chapterpdf (PDF - 44.0KB) The complete bookPDF (PDF - 4.0MB) | Feedback

SIP—Ability to Send a SIP Registration Message on a Border Element

Table Of Contents

SIP—Ability to Send a SIP Registration Message on a Border Element

Prerequisites


SIP—Ability to Send a SIP Registration Message on a Border Element

The SIP—Ability to Send a SIP Registration Message on a Border Element feature allows users to register e164 numbers from the Cisco UBE without POTS dial-peers in the UP state. Registration messages can include numbers, number ranges (such as E.164-numbers), or text information.

Prerequisites

Configure a registrar in sip user-agent configuration mode.

Cisco Unified Border Element

Cisco IOS Release 12.4(24)T or a later release must be installed and running on your Cisco Unified Border Element.

Cisco Unified Border Element (Enterprise)

Cisco IOS XE Release 2.5 or a later release must be installed and running on your Cisco ASR 1000 Series Router.

SUMMARY STEPS

1. enable

2. configure terminal

3. sip-ua

4. credentials username username password password realm domain-name

5. exit

6. end

DETAILED STEPS
 
Command or Action
Purpose

Step 1 

enable

Example:

Router> enable

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2 

configure terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 3 

sip-ua

Example:

Router(config)# sip-ua

Enters sip user-agent configuration mode.

Step 4 

credentials username username password password realm domain-name

Example:

Router(config-sip-ua)# credentials username alex password test realm cisco.com

Enters SIP digest credentials in sip-ua configuration mode.

Step 5 

exit

Example:

Router(config-sip-ua)# exit

Exits the current mode.

Step 6 

end

Example:

Router(config)# end

Returns to privileged EXEC mode.