This documentation has been moved
RADIUS Vendor-Proprietary Attributes
Downloads: This chapterpdf (PDF - 329.0KB) The complete bookPDF (PDF - 3.46MB) | Feedback

RADIUS Vendor-Proprietary Attributes

Table Of Contents

RADIUS Vendor-Proprietary Attributes

Finding Feature Information

Contents

Supported Vendor-Proprietary RADIUS Attributes

Comprehensive List of Vendor-Proprietary RADIUS Attribute Descriptions

Feature Information for RADIUS Vendor-Proprietary Attributes


RADIUS Vendor-Proprietary Attributes


First Published: May 15, 2001

Last Updated: September 25, 2008

The IETF draft standard for RADIUS specifies a method for communicating vendor-proprietary information between the network access server and the RADIUS server. However, some vendors have extended the RADIUS attribute set for specific applications. This document provides Cisco IOS support information for these vendor-proprietary RADIUS attrubutes.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for RADIUS Vendor-Proprietary Attributes" section.

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

Supported Vendor-Proprietary RADIUS Attributes

Comprehensive List of Vendor-Proprietary RADIUS Attribute Descriptions

Supported Vendor-Proprietary RADIUS Attributes

Table 73 lists Cisco-supported vendor-proprietary RADIUS attributes and the Cisco IOS release in which they are implemented. In cases where the attribute has a security server-specific format, the format is specified. Refer to Table 74 for a list of descriptions.


Note Attributes implemented in special (AA) or early development (T) releases will be added to the next mainline image.


Table 73 Supported Vendor-Proprietary RADIUS Attributes 

Number
Vendor-Proprietary Attribute
11.1
11.2
11.3
11.3AA
11.3T
12.0
12.1
12.2
12.3
12.4

17

Change-Password

no

no

yes

yes

yes

yes

yes

yes

no

no

21

Password-Expiration

no

no

yes

yes

yes

yes

yes

yes

no

no

68

Tunnel-ID

no

no

no

no

no

no

no

yes

yes

yes

108

My-Endpoint-Disc-Alias

no

no

no

no

no

no

no

no

no

no

109

My-Name-Alias

no

no

no

no

no

no

no

no

no

no

110

Remote-FW

no

no

no

no

no

no

no

no

no

no

111

Multicast-GLeave-Delay

no

no

no

no

no

no

no

no

no

no

112

CBCP-Enable

no

no

no

no

no

no

no

no

no

no

113

CBCP-Mode

no

no

no

no

no

no

no

no

no

no

114

CBCP-Delay

no

no

no

no

no

no

no

no

no

no

115

CBCP-Trunk-Group

no

no

no

no

no

no

no

no

no

no

116

Appletalk-Route

no

no

no

no

no

no

no

no

no

no

117

Appletalk-Peer-Mode

no

no

no

no

no

no

no

no

no

no

118

Route-Appletalk

no

no

no

no

no

no

no

no

no

no

119

FCP-Parameter

no

no

no

no

no

no

no

no

no

no

120

Modem-PortNo

no

no

no

no

no

no

no

no

no

no

121

Modem-SlotNo

no

no

no

no

no

no

no

no

no

no

122

Modem-ShelfNo

no

no

no

no

no

no

no

no

no

no

123

Call-Attempt-Limit

no

no

no

no

no

no

no

no

no

no

124

Call-Block-Duration

no

no

no

no

no

no

no

no

no

no

125

Maximum-Call-Duration

no

no

no

no

no

no

no

no

no

no

126

Router-Preference

no

no

no

no

no

no

no

no

no

no

127

Tunneling-Protocol

no

no

no

no

no

no

no

no

no

no

128

Shared-Profile-Enable

no

no

no

no

no

no

no

no

yes

yes

129

Primary-Home-Agent

no

no

no

no

no

no

no

no

no

no

130

Secondary-Home-Agent

no

no

no

no

no

no

no

no

no

no

131

Dialout-Allowed

no

no

no

no

no

no

no

no

no

no

133

BACP-Enable

no

no

no

no

no

no

no

no

no

no

134

DHCP-Maximum-Leases

no

no

no

no

no

no

no

no

no

no

135

Primary-DNS-Server

no

no

no

no

yes

yes

yes

yes

yes

yes

136

Secondary-DNS-Server

no

no

no

no

yes

yes

yes

yes

yes

yes

137

Ascend-Client-Assign-DNS

no

no

no

no

no

no

no

no

yes

yes

138

User-Acct-Type

no

no

no

no

no

no

no

no

no

no

139

User-Acct-Host

no

no

no

no

no

no

no

no

no

no

140

User-Acct-Port

no

no

no

no

no

no

no

no

no

no

141

User-Acct-Key

no

no

no

no

no

no

no

no

no

no

142

User-Acct-Base

no

no

no

no

no

no

no

no

no

no

143

User-Acct-Time

no

no

no

no

no

no

no

no

no

no

144

Assign-IP-Client

no

no

no

no

no

no

no

no

no

no

145

Assign-IP-Server

no

no

no

no

no

no

no

no

no

no

146

Assign-IP-Global-Pool

no

no

no

no

no

no

no

no

no

no

147

DHCP-Reply

no

no

no

no

no

no

no

no

no

no

148

DHCP-Pool-Number

no

no

no

no

no

no

no

no

no

no

149

Expect-Callback

no

no

no

no

no

no

no

no

no

no

150

Event-Type

no

no

no

no

no

no

no

no

no

no

151

Ascend-Session-Svr-Key

no

no

no

yes

no

no

yes

yes

yes

yes

152

Ascend-Multicast-Rate-Limit

no

no

no

yes

no

no

yes

yes

yes

yes

153

IF-Netmask

no

no

no

no

no

no

no

no

no

no

154

h323-Remote-Address

no

no

no

no

no

no

no

no

yes

yes

155

Ascend-Multicast-Client

no

no

no

yes

no

no

yes

yes

yes

yes

156

FR-Circuit-Name

no

no

no

no

no

no

no

no

no

no

157

FR-LinkUp

no

no

no

no

no

no

no

no

no

no

158

FR-Nailed-Grp

no

no

no

no

no

no

no

no

no

no

159

FR-Type

no

no

no

no

no

no

no

no

no

no

160

FR-Link-Mgt

no

no

no

no

no

no

no

no

no

no

161

FR-N391

no

no

no

no

no

no

no

no

no

no

162

FR-DCE-N392

no

no

no

no

no

no

no

no

no

no

163

FR-DTE-N392

no

no

no

no

no

no

no

no

no

no

164

FR-DCE-N393

no

no

no

no

no

no

no

no

no

no

165

FR-DTE-N393

no

no

no

no

no

no

no

no

no

no

166

FR-T391

no

no

no

no

no

no

no

no

no

no

167

FR-T392

no

no

no

no

no

no

no

no

no

no

168

Bridge-Address

no

no

no

no

no

no

no

no

no

no

169

TS-Idle-Limit

no

no

no

no

no

no

no

no

no

no

170

TS-Idle-Mode

no

no

no

no

no

no

no

no

no

no

171

DBA-Monitor

no

no

no

no

no

no

no

no

no

no

172

Base-Channel-Count

no

no

no

no

no

no

no

no

no

no

173

Minimum-Channels

no

no

no

no

no

no

no

no

no

no

174

IPX-Route

no

no

no

no

no

no

no

no

no

no

175

FT1-Caller

no

no

no

no

no

no

no

no

no

no

176

Ipsec-Backup-Gateway

no

no

no

no

no

no

no

no

yes

yes

177

rm-Call-Type

no

no

no

no

no

no

no

no

yes

yes

178

Group

no

no

no

no

no

no

no

no

no

no

179

FR-DLCI

no

no

no

no

no

no

no

no

no

no

180

FR-Profile-Name

no

no

no

no

no

no

no

no

no

no

181

Ara-PW

no

no

no

no

no

no

no

no

no

no

182

IPX-Node-Addr

no

no

no

no

no

no

no

no

no

no

183

Home-Agent-IP-Addr

no

no

no

no

no

no

no

no

no

no

184

Home-Agent-Password

no

no

no

no

no

no

no

no

no

no

185

Home-Network-Name

no

no

no

no

no

no

no

no

no

no

186

Home-Agent-UDP-Port

no

no

no

no

no

no

no

no

no

no

187

Multilink-ID

no

no

no

yes

yes

yes

yes

yes

yes

yes

188

Ascend-Num-In-Multilink

no

no

no

yes

yes

yes

yes

yes

yes

yes

189

First-Dest

no

no

no

no

no

no

no

no

no

no

190

Pre-Input-Octets

no

no

no

yes

yes

yes

yes

yes

no

no

191

Pre-Output-Octets

no

no

no

yes

yes

yes

yes

yes

no

no

192

Pre-Input-Packets

no

no

no

yes

yes

yes

yes

yes

no

no

193

Pre-Output-Packets

no

no

no

yes

yes

yes

yes

yes

no

no

194

Maximum-Time

no

no

yes

yes

yes

yes

yes

yes

no

no

195

Disconnect-Cause

no

no

yes

yes

yes

yes

yes

yes

yes

yes

196

Connect-Progress

no

no

no

no

no

no

yes

yes

yes

yes

197

Data-Rate

no

no

no

no

yes

yes

yes

yes

yes

yes

198

PreSession-Time

no

no

no

yes

yes

yes

yes

yes

yes

yes

199

Token-Idle

no

no

no

no

no

no

no

no

yes

yes

201

Require-Auth

no

no

no

no

no

no

no

no

yes

yes

202

Number-Sessions

no

no

no

no

no

no

no

no

no

no

203

Authen-Alias

no

no

no

no

no

no

no

no

no

no

204

Token-Expiry

no

no

no

no

no

no

no

no

no

no

205

Menu-Selector

no

no

no

no

no

no

no

no

no

no

206

Menu-Item

no

no

no

no

no

no

no

no

no

no

207

PW-Warntime

no

no

no

no

no

no

no

no

no

no

208

PW-Lifetime

no

no

yes

yes

yes

yes

yes

yes

yes

yes

209

IP-Direct

no

no

no

no

yes

yes

yes

yes

yes

yes

210

PPP-VJ-Slot-Compression

no

no

yes

yes

yes

yes

yes

yes

yes

yes

211

PPP-VJ-1172

no

no

no

no

no

no

no

no

no

no

212

PPP-Async-Map

no

no

no

no

no

no

no

no

no

no

213

Third-Prompt

no

no

no

no

no

no

no

no

no

no

214

Send-Secret

no

no

no

no

no

no

yes

yes

yes

yes

215

Receive-Secret

no

no

no

no

no

no

no

no

no

no

216

IPX-Peer-Mode

no

no

no

no

no

no

no

no

no

no

217

IP-Pool

no

no

yes

yes

yes

yes

yes

yes

yes

yes

218

Static-Addr-Pool

no

no

yes

yes

yes

yes

yes

yes

yes

yes

219

FR-Direct

no

no

no

no

no

no

no

no

no

no

220

FR-Direct-Profile

no

no

no

no

no

no

no

no

no

no

221

FR-Direct-DLCI

no

no

no

no

no

no

no

no

no

no

222

Handle-IPX

no

no

no

no

no

no

no

no

no

no

223

Netware-Timeout

no

no

no

no

no

no

no

no

no

no

224

IPX-Alias

no

no

no

no

no

no

no

no

no

no

225

Metric

no

no

no

no

no

no

no

no

no

no

226

PRI-Number-Type

no

no

no

no

no

no

no

no

no

no

227

Dial-Number

no

no

no

no

no

no

yes

yes

yes

yes

228

Route-IP

no

no

yes

yes

yes

yes

yes

yes

yes

yes

229

Route-IPX

no

no

no

no

no

no

no

no

no

no

230

Bridge

no

no

no

no

no

no

no

no

no

no

231

Send-Auth

no

no

no

no

no

no

yes

yes

yes

yes

232

Send-Passwd

no

no

no

no

no

no

no

no

no

no

233

Link-Compression

no

no

yes

yes

yes

yes

yes

yes

yes

yes

234

Target-Util

no

no

no

yes

no

yes

yes

yes

yes

yes

235

Maximum-Channels

no

no

yes

yes

yes

yes

yes

yes

yes

yes

236

Inc-Channel-Count

no

no

no

no

no

no

no

no

no

no

237

Dec-Channel-Count

no

no

no

no

no

no

no

no

no

no

238

Seconds-of-History

no

no

no

no

no

no

no

no

no

no

239

History-Weigh-Type

no

no

no

no

no

no

no

no

no

no

240

Add-Seconds

no

no

no

no

no

no

no

no

no

no

241

Remove-Seconds

no

no

no

no

no

no

no

no

no

no

242

Data-Filter

no

no

yes

yes

yes

yes

yes

yes

yes

yes

243

Call-Filter

no

no

no

no

no

no

no

no

yes

yes

244

Idle-Limit

no

no

yes

yes

yes

yes

yes

yes

yes

yes

245

Preempt-Limit

no

no

no

no

no

no

no

no

no

no

246

Callback

no

no

no

no

no

no

no

no

yes

yes

247

Data-Service

no

no

no

no

no

no

yes

yes

yes

yes

248

Force-56

no

no

no

no

no

no

yes

yes

yes

yes

249

Billing Number

no

no

no

no

no

no

no

no

no

no

250

Call-By-Call

no

no

no

no

no

no

no

no

no

no

251

Transit-Number

no

no

no

no

no

no

no

no

no

no

252

Host-Info

no

no

no

no

no

no

no

no

no

no

253

PPP-Address

no

no

no

no

no

no

no

no

no

no

254

MPP-Idle-Percent

no

no

no

no

no

no

no

no

no

no

255

Xmit-Rate

no

no

no

yes

yes

yes

yes

yes

yes

yes


Comprehensive List of Vendor-Proprietary RADIUS Attribute Descriptions

Table 74 lists and describes the known vendor-proprietary RADIUS attributes:

Table 74 Vendor-Proprietary RADIUS Attributes 

Number
Vendor-Proprietary Attribute
Description

17

Change-Password

Specifies a request to change the password of a user.

21

Password-Expiration

Specifies an expiration date for a user's password in the user's file entry.

68

Tunnel-ID

(Ascend 5) Specifies the string assigned by RADIUS for each session using CLID or DNIS tunneling. When accounting is implemented, this value is used for accoutning.

108

My-Endpoint-Disc-Alias

(Ascend 5) No description available.

109

My-Name-Alias

(Ascend 5) No description available.

110

Remote-FW

(Ascend 5) No description available.

111

Multicast-GLeave-Delay

(Ascend 5) No description available.

112

CBCP-Enable

(Ascend 5) No description available.

113

CBCP-Mode

(Ascend 5) No description available.

114

CBCP-Delay

(Ascend 5) No description available.

115

CBCP-Trunk-Group

(Ascend 5) No description available.

116

Appletalk-Route

(Ascend 5) No description available.

117

Appletalk-Peer-Mode

(Ascend 5) No description available.

118

Route-Appletalk

(Ascend 5) No description available.

119

FCP-Parameter

(Ascend 5) No description available.

120

Modem-PortNo

(Ascend 5) No description available.

121

Modem-SlotNo

(Ascend 5) No description available.

122

Modem-ShelfNo

(Ascend 5) No description available.

123

Call-Attempt-Limit

(Ascend 5) No description available.

124

Call-Block-Duration

(Ascend 5) No description available.

125

Maximum-Call-Duration

(Ascend 5) No description available.

126

Router-Preference

(Ascend 5) No description available.

127

Tunneling-Protocol

(Ascend 5) No description available.

128

Shared-Profile-Enable

(Ascend 5) No description available.

129

Primary-Home-Agent

(Ascend 5) No description available.

130

Secondary-Home-Agent

(Ascend 5) No description available.

131

Dialout-Allowed

(Ascend 5) No description available.

133

BACP-Enable

(Ascend 5) No description available.

134

DHCP-Maximum-Leases

(Ascend 5) No description available.

135

Primary-DNS-Server

Identifies a primary DNS server that can be requested by Microsoft PPP clients from the network access server during IPCP negotiation.

136

Secondary-DNS-Server

Identifies a secondary DNS server that can be requested by Microsoft PPP clients from the network access server during IPCP negotiation.

137

Client-Assign-DNS

No description available.

138

User-Acct-Type

No description available.

139

User-Acct-Host

No description available.

140

User-Acct-Port

No description available.

141

User-Acct-Key

No description available.

142

User-Acct-Base

No description available.

143

User-Acct-Time

No description available.

144

Assign-IP-Client

No description available.

145

Assign-IP-Server

No description available.

146

Assign-IP-Global-Pool

No description available.

147

DHCP-Reply

No description available.

148

DHCP-Pool-Number

No description available.

149

Expect-Callback

No description available.

150

Event-Type

No description available.

151

Session-Svr-Key

No description available.

152

Multicast-Rate-Limit

No description available.

153

IF-Netmask

No description available.

154

Remote-Addr

No description available.

155

Multicast-Client

No description available.

156

FR-Circuit-Name

No description available.

157

FR-LinkUp

No description available.

158

FR-Nailed-Grp

No description available.

159

FR-Type

No description available.

160

FR-Link-Mgt

No description available.

161

FR-N391

No description available.

162

FR-DCE-N392

No description available.

163

FR-DTE-N392

No description available.

164

FR-DCE-N393

No description available.

165

FR-DTE-N393

No description available.

166

FR-T391

No description available.

167

FR-T392

No description available.

168

Bridge-Address

No description available.

169

TS-Idle-Limit

No description available.

170

TS-Idle-Mode

No description available.

171

DBA-Monitor

No description available.

172

Base-Channel-Count

No description available.

173

Minimum-Channels

No description available.

174

IPX-Route

No description available.

175

FT1-Caller

No description available.

176

Backup

No description available.

177

Call-Type

No description available.

178

Group

No description available.

179

FR-DLCI

No description available.

180

FR-Profile-Name

No description available.

181

Ara-PW

No description available.

182

IPX-Node-Addr

No description available.

183

Home-Agent-IP-Addr

Indicates the home agent's IP address (in dotted decimal format) when using Ascend Tunnel Management Protocol (ATMP).

184

Home-Agent-Password

With ATMP, specifies the password that the foreign agent uses to authenticate itself.

185

Home-Network-Name

With ATMP, indicates the name of the connection profile to which the home agent sends all packets.

186

Home-Agent-UDP-Port

Indicates the UDP port number the foreign agent uses to send ATMP messages to the home agent.

187

Multilink-ID

Reports the identification number of the multilink bundle when the session closes. This attribute applies to sessions that are part of a multilink bundle. The Multilink-ID attribute is sent in authentication-response packets.

188

Num-In-Multilink

Reports the number of sessions remaining in a multilink bundle when the session reported in an accounting-stop packet closes. This attribute applies to sessions that are part of a multilink bundle. The Num-In-Multilink attribute is sent in authentication-response packets and in some accounting-request packets.

189

First-Dest

Records the destination IP address of the first packet received after authentication.

190

Pre-Input-Octets

Records the number of input octets before authentication. The Pre-Input-Octets attribute is sent in accounting-stop records.

191

Pre-Output-Octets

Records the number of output octets before authentication. The Pre-Output-Octets attribute is sent in accounting-stop records.

192

Pre-Input-Packets

Records the number of input packets before authentication. The Pre-Input-Packets attribute is sent in accounting-stop records.

193

Pre-Output-Packets

Records the number of output packets before authentication. The Pre-Output-Packets attribute is sent in accounting-stop records.

194

Maximum-Time

Specifies the maximum length of time (in seconds) allowed for any session. After the session reaches the time limit, its connection is dropped.

195

Disconnect-Cause

Specifies the reason a connection was taken offline. The Disconnect-Cause attribute is sent in accounting-stop records. This attribute also causes stop records to be generated without first generating start records if disconnection occurs before authentication is performed. For more information, refer to the table of Disconnect-Cause Attribute Values and their meanings.

196

Connect-Progress

Indicates the connection state before the connection is disconnected.

197

Data-Rate

Specifies the average number of bits per second over the course of the connection's lifetime. The Data-Rate attribute is sent in accounting-stop records.

198

PreSession-Time

Specifies the length of time, in seconds, from when a call first connects to when it completes authentication. The PreSession-Time attribute is sent in accounting-stop records.

199

Token-Idle

Indicates the maximum amount of time (in minutes) a cached token can remain alive between authentications.

201

Require-Auth

Defines whether additional authentication is required for class that has been CLID authenticated.

202

Number-Sessions

Specifies the number of active sessions (per class) reported to the RADIUS accounting server.

203

Authen-Alias

Defines the RADIUS server's login name during PPP authentication.

204

Token-Expiry

Defines the lifetime of a cached token.

205

Menu-Selector

Defines a string to be used to cue a user to input data.

206

Menu-Item

Specifies a single menu-item for a user-profile. Up to 20 menu items can be assigned per profile.

207

PW-Warntime

(Ascend 5) No description available.

208

PW-Lifetime

Enables you to specify on a per-user basis the number of days that a password is valid.

209

IP-Direct

When you include this attribute in a user's file entry, a framed route is installed to the routing and bridging tables.

Note Packet routing is dependent upon the entire table, not just this newly installed entry. The inclusion of this attribute does not guarantee that all packets should be sent to the specified IP address; thus, this attribute is not fully supported.

These attribute limitations occur because the Cisco router cannot bypass all internal routing and bridging tables and send packets to a specified IP address.

210

PPP-VJ-Slot-Comp

Instructs the Cisco router not to use slot compression when sending VJ-compressed packets over a PPP link.

211

PPP-VJ-1172

Instructs PPP to use the 0x0037 value for VJ compression.

212

PPP-Async-Map

Gives the Cisco router the asynchronous control character map for the PPP session. The specified control characters are passed through the PPP link as data and used by applications running over the link.

213

Third-Prompt

Defines a third prompt (after username and password) for additional user input.

214

Send-Secret

Enables an encrypted password to be used in place of a regular password in outdial profiles.

215

Receive-Secret

Enables an encrypted password to be verified by the RADIUS server.

216

IPX-Peer-Mode

(Ascend 5) No description available.

217

IP-Pool-Definition

Defines a pool of addresses using the following format: X a.b.c Z; where X is the pool index number, a.b.c is the pool's starting IP address, and Z is the number of IP addresses in the pool. For example, 3 10.0.0.1 5 allocates 10.0.0.1 through 10.0.0.5 for dynamic assignment.

218

Assign-IP-Pool

Tells the router to assign the user and IP address from the IP pool.

219

FR-Direct

Defines whether the connection profile operates in Frame Relay redirect mode.

220

FR-Direct-Profile

Defines the name of the Frame Relay profile carrying this connection to the Frame Relay switch.

221

FR-Direct-DLCI

Indicates the DLCI carrying this connection to the Frame Relay switch.

222

Handle-IPX

Indicates how NCP watchdog requests will be handled.

223

Netware-Timeout

Defines, in minutes, how long the RADIUS server responds to NCP watchdog packets.

224

IPX-Alias

Allows you to define an alias for IPX routers requiring numbered interfaces.

225

Metric

No description available.

226

PRI-Number-Type

No description available.

227

Dial-Number

Defines the number to dial.

228

Route-IP

Indicates whether IP routing is allowed for the user's file entry.

229

Route-IPX

Allows you to enable IPX routing.

230

Bridge

No description available.

231

Send-Auth

Defines the protocol to use (PAP or CHAP) for username-password authentication following CLID authentication.

232

Send-Passwd

Enables the RADIUS server to specify the password that is sent to the remote end of a connection on outgoing calls.

233

Link-Compression

Defines whether to turn on or turn off "stac" compression over a PPP link.

Link compression is defined as a numeric value as follows:

0: None

1: Stac

2: Stac-Draft-9

3: MS-Stac

234

Target-Util

Specifies the load-threshold percentage value for bringing up an additional channel when PPP multilink is defined.

235

Maximum-Channels

Specifies allowed/allocatable maximum number of channels.

236

Inc-Channel-Count

No description available.

237

Dec-Channel-Count

No description available.

238

Seconds-of-History

No description available.

239

History-Weigh-Type

No description available.

240

Add-Seconds

No description available.

241

Remove-Seconds

No description available.

242

Data-Filter

Defines per-user IP data filters. These filters are retrieved only when a call is placed using a RADIUS outgoing profile or answered using a RADIUS incoming profile. Filter entries are applied on a first-match basis; therefore, the order in which filter entries are entered is important.

243

Call-Filter

Defines per-user IP data filters. On a Cisco router, this attribute is identical to the Data-Filter attribute.

244

Idle-Limit

Specifies the maximum time (in seconds) that any session can be idle. When the session reaches the idle time limit, its connection is dropped.

245

Preempt-Limit

No description available.

246

Callback

Allows you to enable or disable callback.

247

Data-Svc

No description available.

248

Force-56

Determines whether the network access server uses only the 56 K portion of a channel, even when all 64 K appear to be available.

249

Billing Number

No description available.

250

Call-By-Call

No description available.

251

Transit-Number

No description available.

252

Host-Info

No description available.

253

PPP-Address

Indicates the IP address reported to the calling unit during PPP IPCP negotiations.

254

MPP-Idle-Percent

No description available.

255

Xmit-Rate

(Ascend 5) No description available.


For more information on vendor-propritary RADIUS attributes, refer to the section "Configuring Router for Vendor-Proprietary RADIUS Server Communication"  in the chapter "Configuring RADIUS."

Feature Information for RADIUS Vendor-Proprietary Attributes

Table 75 lists the release history for this feature.

Not all commands may be available in your Cisco IOS software release. For release information about a specific command, see the command reference documentation.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which Cisco IOS and Catalyst OS software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 75 lists only the Cisco IOS software release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature.


Table 75 Feature Information for RADIUS Vendor-Proprietary Attributes

Feature Name
Releases
Feature Information

RADIUS Vendor-Proprietary Attributes

12.2(1)XE

The IETF draft standard for RADIUS specifies a method for communicating vendor-proprietary information between the network access server and the RADIUS server. However, some vendors have extended the RADIUS attribute set for specific applications. This document provides Cisco IOS support information for these vendor-proprietary RADIUS attrubutes.

In 12.2(1) XE, this feature was introduced.