Reducing Latency and Jitter Using Multilink PPP Roadmap
First Published: May 2, 2005
Last Updated: March 21, 2011
This feature roadmap lists the Cisco IOS features related to Multilink PPP (for reducing latency and jitter) in the Cisco IOS Quality of Service Solutions Configuration Guide and maps them to the documents in which they appear. The roadmap is organized so that you can select your release train and see the features in that release. Find the feature name you are searching for and click on the URL in the "Where Documented" column to access the document containing that feature.
Feature and Release Support
Table 1 lists Multilink PPP feature support (as it relates to reducing latency and jitter) for the following Cisco IOS software release trains:
•Cisco IOS Releases 12.2T, 12.3, and 12.3T
•Cisco IOS Release 12.2S
Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which Cisco IOS and Catalyst OS software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Note Table 1 lists only the Cisco IOS software release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature.
Table 1 lists the most recent release of each software train first and the features in alphabetical order within the release.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2011 Cisco Systems, Inc. All rights reserved.