Novell IPX Configuration Guide, Cisco IOS Release 15SY
Novell IPX Discontinuation
Downloads: This chapterpdf (PDF - 196.0KB) | Feedback

Disable Novell IPX/NLSP/SAP

Table Of Contents

Disable Novell IPX/NLSP/SAP

Finding Feature Information

Contents

Information About Disable Novell IPX/NLSP/SAP

Removal of Support for IPX Routing

Removal of Support for Novell IPX Commands

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Feature Information for Disable Novell IPX/NLSP/SAP


Disable Novell IPX/NLSP/SAP


First Published: July 8, 2011
Last Updated: August 26, 2013

Support for Novell Internetwork Packet Exchange (IPX) routing using NetWare Link Services Protocol (NLSP), Service Advertising Protocol (SAP), Enhanced Interior Gateway Routing Protocol (EIGRP), and Routing Information Protocol (RIP), related features, and commands has been removed from Cisco IOS Release 15.1(3)S, 15.2(2)T, 15.1(1)SY, 15.2(1)E, and later releases.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for Disable Novell IPX/NLSP/SAP" section.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

Information About Disable Novell IPX/NLSP/SAP

Additional References

Feature Information for Disable Novell IPX/NLSP/SAP

Information About Disable Novell IPX/NLSP/SAP

Removal of Support for IPX Routing

Removal of Support for Novell IPX Commands

Removal of Support for IPX Routing

The Novell Internetwork Packet Exchange (IPX) is a routed protocol that is derived from the Xerox Network Systems (XNS) Internet Datagram Protocol (IDP). Cisco supports IPX routing using the EIGRP/RIP protocol.

Because of a significant decrease in the usage of and demand for the Novell IPX protocol, Cisco has decided to discontinue support for IPX routed protocols EIGRP and RIP.

The Novell IPX routed protocol is not supported in Cisco IOS release 15.1(3)S and later releases.

Removal of Support for Novell IPX Commands

The following commands are obsolete and are no longer supported in Cisco IOS Releases 15.1(3)S and later releases (no replacement commands are provided):

access-list (IPX extended)

access-list (IPX standard)

access-list (NLSP)

access-list (SAP filtering)

area-address (NLSP)

clear ipx accounting

clear ipx cache

clear ipx nhrp

clear ipx nlsp neighbors

clear ipx route

clear ipx sap

clear ipx traffic

debug ipx

deny (extended)

deny (NLSP)

deny (SAP filtering)

deny (standard)

distribute-list in

distribute-list out

distribute-sap-list in

distribute-sap-list out

ipx access-group

ipx access-list

ipx accounting

ipx accounting-list

ipx accounting-threshold

ipx accounting-transits

ipx advertise-default-route-only (RIP)

ipx advertise-to-lost-route

ipx backup-server-query-interval (EIGRP)

ipx bandwidth-percent eigrp

ipx broadcast-fastswitching

ipx compression cipx

ipx default-output-rip-delay

ipx default-output-sap-delay

ipx default-route

ipx default-triggered-rip-delay

ipx default-triggered-rip-holddown

ipx default-triggered-sap-delay

ipx default-triggered-sap-holddown

ipx delay

ipx down

ipx eigrp-redistribution-bandwidth

ipx eigrp-sap-split-horizon

ipx encapsulation

ipx flooding-unthrottled (NLSP)

ipx gns-reply-disable

ipx gns-response-delay

ipx gns-round-robin

ipx hello-interval eigrp

ipx helper-address

ipx helper-list

ipx hold-down eigrp

ipx hold-time eigrp

ipx input-network-filter (RIP)

ipx input-sap-filter

ipx internal-network

ipx ipxwan

ipx ipxwan error

ipx ipxwan static

ipx link-delay

ipx linkup-request (RIP)

ipx maximum-hops (RIP)

ipx maximum-paths

ipx nasi-server enable

ipx netbios input-access-filter

ipx netbios output-access-filter

ipx netbios-socket-input-checks

ipx network

ipx nhrp authentication

ipx nhrp holdtime

ipx nhrp interest

ipx nhrp map

ipx nhrp max-send

ipx nhrp network-id

ipx nhrp nhs

ipx nhrp record

ipx nhrp responder

ipx nhrp use

ipx nlsp csnp-interval

ipx nlsp enable

ipx nlsp hello-interval

ipx nlsp hello-multiplier

ipx nlsp lsp-interval

ipx nlsp metric

ipx nlsp multicast

ipx nlsp priority

ipx nlsp retransmit-interval

ipx nlsp rip

ipx nlsp sap

ipx output-ggs-filter

ipx output-gns-filter

ipx output-network-filter (RIP)

ipx output-rip-delay

ipx output-sap-delay

ipx output-sap-filter

ipx pad-process-switched-packets

ipx per-host-load-share

ipx ping-default

ipx potential-pseudonode (NLSP)

ipx rip-max-packetsize

ipx rip-multiplier

ipx rip-queue-maximum

ipx rip-response-delay

ipx rip-update-queue-maximum

ipx route

ipx route-cache

ipx route-cache inactivity-timeout

ipx route-cache max-size

ipx route-cache update-timeout

ipx router

ipx router-filter

ipx router-sap-filter

ipx routing

ipx sap

ipx sap follow-route-path

ipx sap-helper

ipx sap-incremental (EIGRP)

ipx sap-incremental split-horizon

ipx sap-max-packetsize

ipx sap-multiplier

ipx sap-queue-maximum

ipx sap-update-queue-maximum

ipx server-split-horizon-on-server-paths

ipx split-horizon eigrp

ipx spx-idle-time

ipx spx-spoof

ipx throughput

ipx triggered-rip-delay

ipx triggered-rip-holddown

ipx triggered-sap-delay

ipx triggered-sap-holddown

ipx type-20-helpered

ipx type-20-input-checks

ipx type-20-output-checks

ipx type-20-propagation

ipx update interval

ipx update sap-after-rip

ipx watchdog

ipx watchdog-spoof

log-adjacency-changes (IPX)

log-neighbor-changes (EIGRP)

log-neighbor-warnings

lsp-gen-interval (IPX)

lsp-mtu (IPX)

lsp-refresh-interval (IPX)

max-lsp-lifetime (IPX)

multicast

nasi authentication

netbios access-list (IPX)

network (IPX Enhanced IGRP)

permit (IPX extended)

permit (IPX standard)

permit (NLSP)

permit (SAP filtering)

ping ipx

prc-interval (IPX)

priority-list (global)

redistribute (IPX)

route-aggregation (NLSP)

show ipx access-list

show ipx accounting

show ipx cache

show ipx eigrp interfaces

show ipx eigrp neighbors

show ipx eigrp topology

show ipx eigrp traffic

show ipx interface

show ipx nasi connections

show ipx nhrp

show ipx nhrp traffic

show ipx nlsp database

show ipx nlsp neighbors

show ipx nlsp spf-log

show ipx route

show ipx servers

show ipx spx-spoof

show ipx traffic

show sse summary

spf-interval

Additional References

The following sections provide references related to the Disable Novell IPX/NLSP/SAP feature.

Related Documents

Related Topic
Document Title

Novell IPX commands

Cisco IOS Novell IPX Command Reference

Novell IPX configuration tasks

Cisco IOS Novell IPX Configuration Guide


Standards

Standard
Title

None


MIBs

MIB
MIBs Link

None


RFCs

RFC
Title

None


Technical Assistance

Description
Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html


Feature Information for Disable Novell IPX/NLSP/SAP

Table 1 lists the release history for this feature.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


Table 1 Feature Information for Disable Novell IPX/NLSP/SAP

Feature Name
Releases
Feature Information

Disable Novell IPX/NLSP/SAP

15.1(3)S, 15.2(2)T, 15.1(1)SY, 15.2(1)E,

Support for Novell Internetwork Packet Exchange (IPX) routing using NLSP, SAP, EIGRP, and RIP, related features, and commands has been removed from Cisco IOS Release 15.1(3)S, 15.2(2)T, 15.1(1)SY, 15.2(1)E, and later releases.

The following sections provide information about this feature:

Information About Disable Novell IPX/NLSP/SAP

Removal of Support for Novell IPX Commands