This documentation has been moved
BGP 4 MIB Support for per-Peer Received Routes
Downloads: This chapterpdf (PDF - 154.0KB) The complete bookPDF (PDF - 3.7MB) | Feedback

BGP 4 MIB Support for per-Peer Received Routes

Table Of Contents

BGP 4 MIB Support for per-Peer Received Routes

Finding Feature Information

Contents

Restrictions on BGP 4 MIB Support for Per-Peer Received Routes

Information About BGP 4 MIB Support for Per-Peer Received Routes

BGP 4 MIB Support for Per-Peer Received Routes Overview

BGP 4 per-Peer Received Routes Table Elements and Objects

MIB Tables and Objects

AFIs and SAFIs

Network Address Prefix Descriptions for the NLRI Field

Benefits of BGP 4 MIB Support for Per-Peer Received Routes

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Feature Information for BGP 4 MIB Support for per-Peer Received Routes

Glossary


BGP 4 MIB Support for per-Peer Received Routes


First Published: 12.0(21)S
Last Updated: July 27, 2010

This module describes the BGP 4 MIB Support for per-Peer Received Routes feature, introduces a new table in the CISCO-BGP4-MIB that provides the capability to query (by using Simple Network Management Protocol [SNMP] commands) for routes that are learned from individual Border Gateway Protocol (BGP) peers.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for BGP 4 MIB Support for per-Peer Received Routes" section.

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

Restrictions on BGP 4 MIB Support for Per-Peer Received Routes

Information About BGP 4 MIB Support for Per-Peer Received Routes

Additional References

Feature Information for BGP 4 MIB Support for per-Peer Received Routes

Glossary

Restrictions on BGP 4 MIB Support for Per-Peer Received Routes

BGP 4 MIB Support for per-Peer Received Routes supports only routes that are contained in IPv4 AFIs and unicast SAFIs in the local BGP RIB table. The BGP 4 MIB Support for per-Peer Received Routes enhancement is supported only by BGP Version 4.

Information About BGP 4 MIB Support for Per-Peer Received Routes

BGP 4 MIB Support for Per-Peer Received Routes Overview

BGP 4 per-Peer Received Routes Table Elements and Objects

Benefits of BGP 4 MIB Support for Per-Peer Received Routes

BGP 4 MIB Support for Per-Peer Received Routes Overview

BGP 4 MIB Support for per-Peer Received Routes introduces a new table in the CISCO-BGP4-MIB that provides the capability to query (by using SNMP commands) for routes that are learned from individual BGP peers.

Before this new MIB table was introduced, a network operator could obtain the routes learned by a local BGP-speaking router by querying the local BGP speaker with an SNMP command (for example, the snmpwalk command). The network operator used the SNMP command to query the bgp4PathAttrTable of the CISCO-BGP4-MIB. The routes that were returned from a bgp4PathAttrTable query were indexed in the following order:

Prefix

Prefix length

Peer address

Because the bgp4PathAttrTable indexes the prefixes first, obtaining routes learned from individual BGP peers will require the network operator to "walk through" the complete bgp4PathAttrTable and filter out routes from the interested peer. A BGP Routing Information Base (RIB) could contain 10,000 or more routes, which makes a manual "walk" operation impossible and automated walk operations very inefficient.

BGP 4 MIB Support for per-Peer Received Routes introduces a Cisco-specific enterprise extension to the CISCO-BGP4-MIB that defines a new table called the cbgpRouterTable. The cbgpRouterTable provides the same information as the bgp4PathAttrTable with the following two differences:

Routes are indexed in the following order:

Peer address

Prefix

Prefix length

The search criteria for SNMP queries of local routes are improved because peer addresses are indexed before prefixes. A search for routes that are learned from individual peers is improved with this enhancement because peer addresses are indexed before prefixes. A network operator will no longer need to search through potentially thousands of routes to obtain the learned routes of a local BGP RIB table.

Support is added for multiprotocol BGP, Address Family Identifier (AFI), and Subsequent Address Family Identifier (SAFI) information. This information is added in the form of indexes to the cbgpRouterTable. The CISCO-BGP4-MIB can be queried for any combination of AFIs and SAFIs that are supported by the local BGP speaker.


Note The MIB will be populated only if the router is configured to run a BGP process. The present implementation of BGP 4 MIB Support for per-Peer Received Routes will show only routes contained in IPv4 AFI and unicast SAFI BGP local RIB tables. Support for showing routes contained in other local RIB tables will be added in the future.


BGP 4 per-Peer Received Routes Table Elements and Objects

The following sections describe new table elements, AFI and SAFI tables and objects, and network address prefixes in the Network Layer Reachability Information (NLRI) fields that have been introduced by the BGP 4 MIB Support for per-Peer Received Routes enhancement.

MIB Tables and Objects

Table 1 describes the MIB indexes of the cbgpRouterTable.

For a complete description of the MIB, see the CISCO-BGP4-MIB file CISCO-BGP4-MIB.my, available through Cisco.com at the following URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Table 1 MIB Indexes of the cbgpRouterTable

MIB Indexes
Description

cbgpRouteAfi

Represents the AFI of the network layer protocol that is associated with the route.

cbgpRouteSafi

Represents the SAFI of the route. It gives additional information about the type of the route. The AFI and SAFI are used together to determine which local RIB (Loc-RIB) contains a particular route.

cbgpRoutePeerType

Represents the type of network layer address that is stored in the cbgpRoutePeer object.

cbgpRoutePeer

Represents the network layer address of the peer from which the route information has been learned.

cbgpRouteAddrPrefix

Represents the network address prefix that is carried in a BGP update message.

See Table 2 for information about the types of network layer addresses that can be stored in specific types of AFI and SAFI objects.

cbgpRouteAddrPrefixLen

Represents the length in bits of the network address prefix in the NLRI field.

See Table 3 for a description of the 13 possible entries.


AFIs and SAFIs

Table 2 lists the AFI and SAFI values that can be assigned to or held by the cbgpRouteAfi and cbgpRouteSafi indexes, respectively. Table 2 also displays the network address prefix type that can be held by specific combinations of AFIs and SAFIs. The type of network address prefix that can be carried in a BGP update message depends on the combination of AFIs and SAFIs.

Table 2 AFIs and SAFIs

AFI
SAFI
Type

ipv4(1)

unicast(1)

IPv4 address

ipv4(1)

multicast(2)

IPv4 address

ipv4(1)

vpn(128)

VPN-IPv4 address

ipv6(2)

unicast(1)

IPv6 address



Note A VPN-IPv4 address is a 12-byte quantity that begins with an 8-byte Route Distinguisher (RD) and ends with a 4-byte IPv4 address. Any bits beyond the length specified by cbgpRouteAddrPrefixLen are represented as zeros.


Network Address Prefix Descriptions for the NLRI Field

Table 3 describes the length in bits of the network address prefix in the NLRI field of the cbgpRouteTable. Each entry in the table provides information about the route that is selected by any of the six indexes in Table 1.

Table 3 Network Address Prefix Descriptions for the NLRI Field

Table or Object (or Index)
Description

cbgpRouteOrigin

The ultimate origin of the route information.

cbgpRouteASPathSegment

The sequence of autonomous system path segments.

cbgpRouteNextHop

The network layer address of the autonomous system border router that traffic should pass through to get to the destination network.

cbgpRouteMedPresent

Indicates that the MULTI_EXIT_DISC attribute for the route is either present or absent.

cbgpRouteMultiExitDisc

Metric that is used to discriminate between multiple exit points to an adjacent autonomous system. The value of this object is irrelevant if the value of the cbgpRouteMedPresent object is "false(2)."

cbgpRouteLocalPrefPresent

Indicates that the LOCAL_PREF attribute for the route is either present or absent.

cbgpRouteLocalPref

Determines the degree of preference for an advertised route by an originating BGP speaker. The value of this object is irrelevant if the value of the cbgRouteLocalPrefPresent object is "false(2)."

cbgpRouteAtomicAggregate

Determines if the system has selected a less specific route without selecting a more specific route.

cbgpRouteAggregatorAS

The autonomous system number of the last BGP speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.

cbgpRouteAggregatorAddrType

Represents the type of network layer address that is stored in the cbgpRouteAggregatorAddr object.

cbgpRouteAggregatorAddr

The network layer address of the last BGP 4 speaker that performed route aggregation. A value of all zeros indicates the absence of this attribute.

cbgpRouteBest

An indication of whether this route was chosen as the best BGP 4 route.

cbgpRouteUnknownAttr

One or more path attributes not understood by the local BGP speaker. A size of 0 indicates that this attribute is absent.


Benefits of BGP 4 MIB Support for Per-Peer Received Routes

Improved SNMP Query Capabilities—The search criteria for SNMP queries for routes that are advertised by individual peers are improved because the peer address is indexed before the prefix. A network operator will no longer need to search through potentially thousands of routes to obtain the learned routes of a local BGP RIB table.

Improved AFI and SAFI Support—Support is added for multiprotocol BGP. AFI and SAFI are added as indexes to the table. The CISCO-BGP4-MIB can be queried for any combination of AFIs and SAFIs that are supported by the local BGP speaker.

Additional References

Related Documents

Related Topic
Document Title

Configuring MIBs for BGP

Configuring Advanced BGP Features

BGP commands

Cisco IOS IP Routing: BGP Command Reference

Configuring SNMP Support

Configuring SNMP Support

SNMP Commands

"SNMP Commands" in Cisco IOS Network Management Command Reference


Standards

Standard
Title

None


MIBs

MIB
MIBs Link

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs


RFCs

RFC
Title

RFC 1657

BGP-4 MIB

RFC 1771

A Border Gateway Protocol 4 (BGP-4)

RFC 2547

BGP/MPLS VPNs

RFC 2858

Multiprotocol Extensions for BGP-4


Technical Assistance

Description
Link

The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.

To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.

Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.

http://www.cisco.com/techsupport


Feature Information for BGP 4 MIB Support for per-Peer Received Routes

Table 4 lists the features in this module and provides links to specific configuration information. Only features that were introduced or modified in Cisco IOS Releases 12.2(1), 12.0(3)S, 12.2(27)SBC, 12.2(33)SRB, 12.2(33)SXH, or later release appear in the table.

For information about a feature in this technology that is not documented here, see the "Cisco BGP Features Roadmap."

Not all commands may be available in your Cisco IOS software release. For release information about a specific command, see the command reference documentation.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which Cisco IOS and Catalyst OS software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 4 lists only the Cisco IOS software release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature.


Table 4 Feature Information for BGP 4 MIB Support for per-Peer Received Routes

Feature Name
Releases
Feature Configuration Information

BGP 4 MIB Support for per-Peer Received Routes

12.0(21)S
12.2(14)S
12.2(28)SB
15.0(1)S

This feature introduces a new table in the CISCO-BGP4-MIB that provides the capability to query (by using SNMP commands) for routes that are learned from individual BGP peers.

No commands were introduced or modified by this feature.


Glossary

AFI—Address Family Identifier. Carries the identity of the network layer protocol that is associated with the network address.

BGP—Border Gateway Protocol. An interdomain routing protocol that exchanges reachability information with other BGP systems. It is defined by RFC 1163, A Border Gateway Protocol (BGP). The current implementation of BGP is BGP Version 4 (BGP4). BGP4 is the predominant interdomain routing protocol that is used on the Internet. It supports CIDR and uses route aggregation mechanisms to reduce the size of routing tables.

MBGP—multiprotocol BGP. An enhanced version of BGP that carries routing information for multiple network layer protocols and IP multicast routes. It is defined in RFC 2858, Multiprotocol Extensions for BGP-4.

MIB—Management Information Base. A group of managed objects that are contained within a virtual information store or database. MIB objects are stored so that values can be assigned to object identifiers and to assist managed agents by defining which MIB objects should be implemented. The value of a MIB object can be changed or retrieved using SNMP or CMIP commands, usually through a GUI network management system. MIB objects are organized in a tree structure that includes public (standard) and private (proprietary) branches.

NLRI—Network Layer Reachability Information. Carries route attributes that describe a route and how to connect to a destination. This information is carried in BGP update messages. A BGP update message can carry one or more NLRI prefixes.

RIB—Routing Information Base (RIB). A central repository of routes that contains Layer 3 reachability information and destination IP addresses or prefixes. The RIB is also known as the routing table.

SAFI—Subsequent Address Family Identifier. Provides additional information about the type of the Network Layer Reachability Information that is carried in the attribute.

SNMP—Simple Network Management Protocol. A network management protocol used almost exclusively in TCP/IP networks. SNMP provides a means to monitor and control network devices and to manage configurations, statistics collection, performance, and security.

snmpwalk—The snmpwalk command is a Simple Network Management Protocol (SNMP) application that is used to communicate with a network entity MIB using SNMP.

VPN—Virtual Private Network. Enables IP traffic to travel securely over a public TCP/IP network by encrypting all traffic from one network to another. A VPN uses a tunnel to encrypt all information at the IP level.