Guest

Networking Software (IOS & NX-OS)

Feature Information for Cisco UBE Standards Compliance

  • Viewing Options

  • PDF (38.4 KB)
  • Feedback
Feature Information for Cisco UBE Standards Compliance

Table Of Contents

Feature Information for Cisco UBE Standards Compliance


Feature Information for Cisco UBE Standards Compliance

Table 1 lists the release history for this chapter.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the Cisco IOS software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


Table 1 Feature Information for Cisco UBE Standards Compliance Features 

Feature Name
Releases
Feature Information

SIP—RFC 2782 Compliance of DNS SRV Queries

Cisco IOS XE Release 2.5

Effective with Cisco IOS XE Release 2.5, the DNS SRV query used to determine the IP address of the user endpoint is modified in compliance with RFC 2782 (which supersedes RFC 2052). The DNS SRV query adds the protocol label with an underscore "_" character to reduce the risk of duplicate names being used for unrelated purposes. The form compliant with RFC 2782 is the default style.

The following command was introduced or modified: srv version.


Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2011 Cisco Systems, Inc. All rights reserved.