Cisco UBE Management
Available Languages
Table Of Contents
Cisco Unified Border Element (Enterprise) Management
Configuration of Cisco UBE Management Features
Cisco Unified Border Element (Enterprise) Management
Revised: November 24, 2010First Published: November 25, 2009Last Updated: February 2, 2011This Cisco Unified Border Element (Enterprise) is a special Cisco IOS XE software image that runs on Cisco ASR1000. It provides a network-to-network interface point for billing, security, call admission control, quality of service, and signaling interworking. This chapter describes basic gateway functionality, software images, topology, and summarizes supported features.
Activation
Cisco Product Authorization Key (PAK)—A Product Authorization Key (PAK) is required to configure some of the features described in this guide. Before you start the configuration process, please register your products and activate your PAK at the following URL http://www.cisco.com/go/license.
Finding Feature Information
For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Cisco Unified Border Element Features Roadmap" section on page 3.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Configuration of Cisco UBE Management Features
This chapter contains the following configuration topics:
Cisco UBE (Enterprise) Prerequisites and Restrictions
•
•
Monitoring the SIP Trunk
Redundancy - High Availability (HA)
•
Protocol Monitoring
•
•
Feedback