Guest

Networking Software (IOS & NX-OS)

Feature Information for Enterprise Application Interoperability for H.323-to-SIP and SIP-to-SIP

  • Viewing Options

  • PDF (39.6 KB)
  • Feedback
Feature Information for Enterprise Application Interoperability for H.323-to-SIP and SIP-to-SIP

Table Of Contents

Feature Information for Enterprise Application Interoperability for H.323-to-SIP and SIP-to-SIP


Feature Information for Enterprise Application Interoperability for H.323-to-SIP and SIP-to-SIP

Table 1 lists the release history for this chapter.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the Cisco IOS software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


Table 1 Feature Information for Enterprise Application Interoperability for H.323-to-SIP and SIP-to-SIP Features 

Feature Name
Releases
Feature Information

Expires Timer Reset on Receiving or Sending SIP 183 Message

Cisco IOS XE
Release 3.1S

This feature enables support for resetting the Expires timer upon receipt of SIP 183 messages on Cisco Unified Communications Manager Express (Cisco Unified CME), a Cisco IOS voice gateway, or a Cisco Unified Border Element (Cisco UBE).

The following commands were modified in this feature: reset timer expires and voice-class sip reset timer expires

SIP 181 Call is Being Forwarded Message

Cisco IOSXE
Release 3.1S

This feature allows users to configure support for SIP 181 Call is Being Forwarded messages either globally or on a specific dial-peer.

This feature includes the following new or modified commands: bock, voice-class sip block, map resp-code, voice-class sip map.


Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2011 Cisco Systems, Inc. All rights reserved.