User Security Configuration Guide Cisco IOS XE Release 3S
Cisco IOS Login Enhancements (Login Block)
Downloads: This chapterpdf (PDF - 159.0KB) | Feedback

Cisco IOS Login Enhancements (Login Block)

Table Of Contents

Cisco IOS Login Enhancements (Login Block)

Finding Feature Information

Contents

Information About Cisco IOS Login Enhancements

Protecting Against Denial of Service and Dictionary Login Attacks

Login Enhancements Functionality Overview

Delays Between Successive Login Attempts

Login Shutdown If DoS Attacks Are Suspected

How to Configure Cisco IOS Login Enhancements

Configuring Login Parameters

Login Parameter Defaults

What to Do Next

Verifying Login Parameters

Examples

Configuration Examples for Login Parameters

Setting Login Parameters: Example

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Feature Information for Cisco IOS Login Enhancements (Login Block)


Cisco IOS Login Enhancements (Login Block)


First Published: October 4, 2008
Last Updated: January 28, 2011

The Cisco IOS Login Enhancements (Login Block) feature allows users to enhance the security of a router by configuring options to automatically block further login attempts when a possible denial-of-service (DoS) attack is detected.

The login block and login delay options introduced by this feature can be configured for Telnet or SSH virtual connections. By enabling this feature, you can slow down "dictionary attacks" by enforcing a "quiet period" if multiple failed connection attempts are detected, thereby protecting the routing device from a type of denial-of-service attack.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for Cisco IOS Login Enhancements (Login Block)" section.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

Information About Cisco IOS Login Enhancements

How to Configure Cisco IOS Login Enhancements

Configuration Examples for Login Parameters

Additional References

Feature Information for Cisco IOS Login Enhancements (Login Block)

Information About Cisco IOS Login Enhancements

Protecting Against Denial of Service and Dictionary Login Attacks

Login Enhancements Functionality Overview

Protecting Against Denial of Service and Dictionary Login Attacks

Connecting to a routing device for the purposes of administering (managing) the device, at either the User or Executive level, is most frequently performed using Telnet or SSH (secure shell) from a remote console (such as a PC). SSH provides a more secure connection option because communication traffic between the user's device and the managed device are encrypted. The Login Block capability, when enabled, applies to both Telnet connections and SSH connections.

The automated activation and logging of the Login Block and Quiet Period capabilities introduced by this feature are designed to further enhance the security of your devices by specifically addressing two well known methods that individuals use to attempt to disrupt or compromise networked devices.

If the connection address of a device is discovered and is reachable, a malicious user may attempt to interfere with the normal operations of the device by flooding it with connection requests. This type of attack is referred to as an attempted Denial-of-Service, because it is possible that the device may become too busy trying to process the repeated login connection attempts to properly handle normal routing services or will not be able to provide the normal login service to legitimate system administrators.

The primary intention of a dictionary attack, unlike a typical DoS attack, is to actually gain administrative access to the device. A dictionary attack is an automated process to attempt to login by attempting thousands, or even millions, of username/password combinations. (This type of attack is called a "dictionary attack" because it typically uses, as a start, every word found in a typical dictionary as a possible password.) As scripts or programs are used to attempt this access, the profile for such attempts is typically the same as for DoS attempts; multiple login attempts in a short period of time.

By enabling a detection profile, the routing device can be configured to react to repeated failed login attempts by refusing further connection request (login blocking). This block can be configured for a period of time, called a "quiet period". Legitimate connection attempts can still be permitted during a quiet period by configuring an access-list (ACL) with the addresses that you know to be associated with system administrators.

Login Enhancements Functionality Overview

Delays Between Successive Login Attempts

Login Shutdown If DoS Attacks Are Suspected

How to Configure Cisco IOS Login Enhancements

Delays Between Successive Login Attempts

A Cisco device can accept virtual connections as fast as they can be processed. Introducing a delay between login attempts helps to protect the Cisco device against malicious login connections such as dictionary attacks and DoS attacks. Delays can be enabled in one of the following ways:

Via the auto secure command. If you enable the AutoSecure feature, the default login delay time of one second is automatically enforced.

Via the login block-for command. You must enter this command before issuing the login delay command. If you enter only the login block-for command, the default login delay time of one second is automatically enforced.

Via the new global configuration mode command, login delay, which allows you to specify a the login delay time to be enforced, in seconds.

Login Shutdown If DoS Attacks Are Suspected

If the configured number of connection attempts fail within a specified time period, the Cisco device will not accept any additional connections for a "quiet period." (Hosts that are permitted by a predefined access-control list [ACL] are excluded from the quiet period.)

The number of failed connection attempts that trigger the quiet period can be specified via the new global configuration mode command login block-for. The predefined ACL that is excluded from the quiet period can be specified via the new global configuration mode command login quiet-mode access-class.

This functionality is disabled by default, and it is not enabled if autosecure if enabled.

How to Configure Cisco IOS Login Enhancements

Configuring Login Parameters (Required)

Verifying Login Parameters (Optional)

Configuring Login Parameters

Use this task to configure your Cisco device for login parameters that help detect suspected DoS attacks and slow down dictionary attacks.

Login Parameter Defaults

All login parameters are disabled by default. You must issue the login block-for command, which enables default login functionality, before using any other login commands. After the login block-for command is enabled, the following defaults are enforced:

A default login delay of one second

All login attempts made via Telnet or SSH are denied during the quiet period; that is, no ACLs are exempt from the login period until the login quiet-mode access-class command is issued.

SUMMARY STEPS

1. enable

2. configure terminal

3. login block-for seconds attempts tries within seconds

4. login quiet-mode access-class {acl-name | acl-number}

5. login delay seconds

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enable

Example:

Router> enable

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2 

configure terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 3 

login block-for seconds attempts tries within seconds

Example:

Router(config)# login block-for 100 attempts 2 within 100

Configures your Cisco IOS XE device for login parameters that help provide DoS detection.

Note This command must be issued before any other login command can be used.

Step 4 

login quiet-mode access-class {acl-name | acl-number}

Example:

Router(config)# login quiet-mode access-class myacl

(Optional) Although this command is optional, it is recommended that it be configured to specify an ACL that is to be applied to the router when the router switches to quiet mode. When the router is in quiet mode, all login requests are deniedand the only available connection is through the console.

If this command is not configured, then the default ACL sl_def_acl is created on the router. This ACL is hidden in the running configuration. Use the show access-list sl_def_acl to view the parameters for the default ACL.

For example:

Router#show access-lists sl_def_acl

Extended IP access list sl_def_acl
    10 deny tcp any any eq telnet
    20 deny tcp any any eq www
    30 deny tcp any any eq 22
    40 permit ip any any

Step 5 

login delay seconds

Example:

Router(config)# login delay 10

(Optional) Configures a delay between successive login attempts.

What to Do Next

After you have configured login parameters on your router, you may wish to verify the settings. To complete this task, see the following section "Verifying Login Parameters."

Verifying Login Parameters

Use this task to verify the applied login configuration and present login status on your router.

SUMMARY STEPS

1. enable

2. show login [failures]

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enable

Example:

Router> enable

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2 

show login [failures]

Example:

Router# show login

Displays login parameters.

failures—Displays information related only to failed login attempts.

Examples

The following sample output from the show login command verifies that no login parameters have been specified:

Router# show login

No login delay has been applied.
No Quiet-Mode access list has been configured.
All successful login is logged and generate SNMP traps.
All failed login is logged and generate SNMP traps

Router NOT enabled to watch for login Attacks

The following sample output from the show login command verifies that the login block-for command is issued. In this example, the command is configured to block login hosts for 100 seconds if 16 or more login requests fail within 100 seconds; five login requests have already failed.

Router# show login

A default login delay of 1 seconds is applied.
No Quiet-Mode access list has been configured.
All successful login is logged and generate SNMP traps.
All failed login is logged and generate SNMP traps.

Router enabled to watch for login Attacks.
If more than 15 login failures occur in 100 seconds or less, logins will be disabled for 
100 seconds.

Router presently in Watch-Mode, will remain in Watch-Mode for 95 seconds.
Present login failure count 5.

The following sample output from the show login command verifies that the router is in quiet mode. In this example, the login block-for command was configured to block login hosts for 100 seconds if 3 or more login requests fail within 100 seconds.

Router# show login

A default login delay of 1 seconds is applied.
No Quiet-Mode access list has been configured.
All successful login is logged and generate SNMP traps.
All failed login is logged and generate SNMP traps.

Router enabled to watch for login Attacks.
If more than 2 login failures occur in 100 seconds or less, logins will be disabled for 
100 seconds.

Router presently in Quiet-Mode, will remain in Quiet-Mode for 93 seconds.
Denying logins from all sources.

The following sample output from show login failures command shows all failed login attempts on the router:

Router# show login failures

Information about login failure's with the device

Username      Source IPAddr  lPort Count  TimeStamp
try1          10.1.1.1        23    1     21:52:49 UTC Sun Mar 9 2003
try2          10.1.1.2        23    1     21:52:52 UTC Sun Mar 9 2003

The following sample output from show login failures command verifies that no information is presently logged:

Router# show login failures

*** No logged failed login attempts with the device.***

Configuration Examples for Login Parameters

Setting Login Parameters: Example

Setting Login Parameters: Example

The following example shows how to configure your router to enter a 100 second quiet period if 15 failed login attempts is exceeded within 100 seconds; all login requests will be denied during the quiet period except hosts from the ACL "myacl."

Router(config)# login block-for 100 attempts 15 within 100
Router(config)# login quiet-mode access-class myacl

Additional References

Related Documents

Related Topic
Document Title

Configuring autosecure

"AutoSecure" feature module.

Security commands: complete command syntax, command modes, command history, defaults, usage guidelines, and examples

Cisco IOS Security Command Reference

Secure Management/Administrative Access

"Role-Based CLI Access" feature module.


Standards

Standards
Title

None.


MIBs

MIBs
MIBs Link

None.

To locate and download MIBs for selected platforms, Cisco software releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs


RFCs

RFCs
Title

No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature.


Technical Assistance

Description
Link

The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.

To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.

Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html


Feature Information for Cisco IOS Login Enhancements (Login Block)

Table 1 lists the release history for this feature.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


Table 1 Feature Information for Cisco IOS Login Enhancements (Login Block)

Feature Name
Releases
Feature Configuration Information

Cisco IOS Login Enhancements

Cisco IOS XE Release 2.1

The Cisco IOS Login Enhancements (Login Block) feature allows users to enhance the security of a router by configuring options to automatically block further login attempts when a possible denial-of-service (DoS) attack is detected.

In Cisco IOS XE Release 2.1, this feature was introduced on Cisco ASR 1000 Series Service Aggregation Routers.

The following commands were modified by this feature: login block-for, login delay, login quiet-mode access-class, show login.



Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)