Cisco IOS XE Configuration Fundamentals Configuration Guide, Release 2
Unique Device Identifier Retrieval
Downloads: This chapterpdf (PDF - 156.0KB) The complete bookPDF (PDF - 1.48MB) | Feedback

Unique Device Identifier Retrieval

Table Of Contents

Unique Device Identifier Retrieval

Finding Feature Information

Contents

Prerequisites for Unique Device Identifier Retrieval

Information About Unique Device Identifier Retrieval

Unique Device Identifier Overview

Benefits of the Unique Device Identifier Retrieval Feature

How to Retrieve the Unique Device Identifier

Retrieving the Unique Device Identifier

Troubleshooting Tips

Configuration Examples for Unique Device Identifier Retrieval

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Feature Information for Unique Device Identifier Retrieval


Unique Device Identifier Retrieval


The Unique Device Identifier Retrieval feature provides the ability to retrieve and display the Unique Device Identifier (UDI) information from any Cisco product that has electronically stored such identity information.

Finding Feature Information

For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for Unique Device Identifier Retrieval" section.

Use Cisco Feature Navigator to find information about platform support and Cisco IOS XE software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

Prerequisites for Unique Device Identifier Retrieval

Information About Unique Device Identifier Retrieval

How to Retrieve the Unique Device Identifier

Configuration Examples for Unique Device Identifier Retrieval

Additional References

Feature Information for Unique Device Identifier Retrieval

Prerequisites for Unique Device Identifier Retrieval

In order to use UDI retrieval, the Cisco product in use must be UDI-enabled. A UDI-enabled Cisco product supports five required Entity MIB objects. The five Entity MIB v2 (RFC-2737) objects are as follows:

entPhysicalName

entPhysicalDescr

entPhysicalModelName

entPhysicalHardwareRev

entPhysicalSerialNum

Although the show inventory command may be available, using that command on devices that are not UDI-enabled will likely produce no output.

Information About Unique Device Identifier Retrieval

Before using the UDI Retrieval feature, you should understand the following concepts:

Unique Device Identifier Overview

Benefits of the Unique Device Identifier Retrieval Feature

Unique Device Identifier Overview

Each identifiable product is an entity, as defined by the Entity MIB (RFC-2737) and its supporting documents. Some entities, such as a chassis, will have subentities like slots. A Fast Ethernet switch might be a member of a superentity like a stack. Most Cisco entities that are orderable products will leave the factory with an assigned UDI. The UDI information is printed on a label that is affixed to the physical hardware device, and it is also stored electronically on the device in order to facilitate remote retrieval.

A UDI consists of the following elements:

Product identifier (PID)

Version identifier (VID)

Serial number (SN)

The PID is the name by which the product can be ordered; it has been historically called the "Product Name" or "Part Number." This is the identifier that one would use to order an exact replacement part.

The VID is the version of the product. Whenever a product has been revised, the VID will be incremented. The VID is incremented according to a rigorous process derived from Telcordia GR-209-CORE, an industry guideline that governs product change notices.

The SN is the vendor-unique serialization of the product. Each manufactured product will carry a unique serial number assigned at the factory, which cannot be changed in the field. This is the means by which to identify an individual, specific instance of a product.

Benefits of the Unique Device Identifier Retrieval Feature

Identifies individual Cisco products in your networks.

Reduces operating expenses for asset management through simple, cross-platform, consistent identification of Cisco products.

Identifies PIDs for replaceable products.

Facilitates discovery of products subject to recall or revision.

Automates Cisco product inventory (capital and asset management).

Provides a mechanism to determine the entitlement level of a Cisco product for repair and replacement service.

How to Retrieve the Unique Device Identifier

This section contains the following task:

Retrieving the Unique Device Identifier (required)

Retrieving the Unique Device Identifier

Perform this task to retrieve and display identification information for a Cisco product.

SUMMARY STEPS

1. enable

2. show inventory [raw] [entity]

DETAILED STEPS


Step 1 enable

Enters privileged EXEC mode. Enter your password if prompted.

Router> enable

Step 2 show inventory [raw] [entity]

Enter the show inventory command to retrieve and display information about all of the Cisco products installed in the networking device that are assigned a PID, VID, and SN. If a Cisco entity is not assigned a PID, that entity is not retrieved or displayed.

Router# show inventory

NAME: "Chassis", DESCR: "12008/GRP chassis"
PID: GSR8/40           ,  VID: V01,  SN: 63915640

NAME: "slot 0", DESCR: "GRP"
PID: GRP-B             ,  VID: V01,  SN: CAB021300R5

NAME: "slot 1", DESCR: "4 port ATM OC3 multimode"
PID: 4OC3/ATM-MM-SC    ,  VID: V01,  SN: CAB04036GT1

NAME: "slot 3", DESCR: "4 port 0C3 POS multimode"
PID: LC-4OC3/POS-MM    ,  VID: V01,  SN: CAB014900GU

NAME: "slot 5", DESCR: "1 port Gigabit Ethernet"
PID: GE-GBIC-SC-B      ,  VID: V01,  SN: CAB034251NX

NAME: "slot 7", DESCR: "GRP"
PID: GRP-B             ,  VID: V01,  SN: CAB0428AN4O

NAME: "slot 16", DESCR: "GSR 12008 Clock Scheduler Card"
PID: GSR8-CSC/ALRM     ,  VID: V01,  SN: CAB0429AUYH

NAME: "sfslot 1", DESCR: "GSR 12008 Switch Fabric Card"
PID: GSR8-SFC          ,  VID: V01,  SN: CAB0428ALOS

NAME: "sfslot 2", DESCR: "GSR 12008 Switch Fabric Card"
PID: GSR8-SFC          ,  VID: V01,  SN: CAB0429AU0M

NAME: "sfslot 3", DESCR: "GSR 12008 Switch Fabric Card"
PID: GSR8-SFC          ,  VID: V01,  SN: CAB0429ARD7

NAME: "PSslot 1", DESCR: "GSR 12008 AC Power Supply"
PID: FWR-GSR8-AC-B     ,  VID: V01,  SN: CAB041999CW

Enter the show inventory command with an entity argument value to display the UDI information for a specific type of Cisco entity installed in the networking device. In this example, a list of Cisco entities that match the module RO argument string is displayed.

Router# show inventory "module RO"

NAME: ''module R0'', DESCR: ''Cisco ASR1000 Route Processor 2'' 
PID: ASR1000-RP2 ,  VID: V01,  SN: JAE13041JEX 


Note The raw keyword option is primarily intended for troubleshooting problems with the show inventory command itself.


Router# show inventory raw

NAME: "Chassis", DESCR: "12008/GRP chassis"
PID:                   ,  VID: V01,  SN: 63915640

NAME: "slot 0", DESCR: "GRP"
PID:                   ,  VID: V01,  SN: CAB021300R5

NAME: "slot 1", DESCR: "4 port ATM OC3 multimode"
PID: 4OC3/ATM-MM-SC    ,  VID: V01,  SN: CAB04036GT1

NAME: "slot 3", DESCR: "4 port 0C3 POS multimode"
PID: LC-4OC3/POS-MM    ,  VID: V01,  SN: CAB014900GU


Troubleshooting Tips

If any of the Cisco products do not have an assigned PID, the output may display incorrect PIDs and the VID and SN elements may be missing, as in the following example.

NAME: "Four Port High-Speed Serial", DESCR: "Four Port High-Speed Serial"
PID: Four Port High-Speed Serial, VID: 1.1, SN: 17202570   

NAME: "Serial1/0", DESCR: "M4T"
PID: M4T               , VID:    , SN:

In the sample output, the PID is exactly the same as the product description. The UDI is designed for use with new Cisco products that have a PID assigned. UDI information on older Cisco products is not always reliable.

Configuration Examples for Unique Device Identifier Retrieval

There are no configuration examples for the UDI Retrieval feature. For sample display output from the show inventory command, see the "Retrieving the Unique Device Identifier" section.

Additional References

This section provides references related to the UDI Retrieval feature.

Related Documents


Standards

Standards
Title

No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature.


MIBs

MIBs
MIBs Link

CISCO-ENTITY-ASSET-MIB

To locate and download MIBs for selected platforms, Cisco IOS XE releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs


RFCs

RFCs
Title

RFC 2737

Entity MIB (Version 2)


Technical Assistance

Description
Link

The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.

To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.

Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.

http://www.cisco.com/techsupport


Feature Information for Unique Device Identifier Retrieval

Table 1 lists the features in this module and provides links to specific configuration information.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which Ciso IOS XE software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the Cisco IOS XE software release that introduced support for a given feature in a given Cisco IOS XE software release train. Unless noted otherwise, subsequent releases of that Cisco IOS XE software release train also support that feature.


Table 1 Feature Information for Unique Device Identifier Retrieval

Feature Name
Releases
Feature Information

Unique Device Identifier Retrieval

Cisco IOS XE Release 2.1

This feature was introduced.