This documentation has been moved
Configuring CPU Friendly NetFlow Export Support for Cisco IOS Flexible NetFlow
Downloads: This chapterpdf (PDF - 146.0KB) The complete bookPDF (PDF - 3.91MB) | Feedback

Configuring CPU Friendly NetFlow Export Support for Cisco IOS Flexible NetFlow

Table Of Contents

Configuring CPU Friendly NetFlow Export Support for Cisco IOS Flexible NetFlow

Finding Feature Information

Contents

Prerequisites for CPU Friendly NetFlow Export

Information About CPU Friendly NetFlow Export

Overview of CPU Friendly NetFlow Export

How to Configure CPU Friendly NetFlow Export

Configuring the CPU Utilization Threshold

Configuration Examples for CPU Friendly NetFlow Export

Example: Configuring CPU Utilization Thresholds for NetFlow Export

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Feature Information for CPU Friendly NetFlow Export


Configuring CPU Friendly NetFlow Export Support for Cisco IOS Flexible NetFlow


First Published: February 14, 2011
Last Updated: July 20, 2011

The CPU Friendly NetFlow Export feature provides the capability for the software NetFlow modules to adjust their Central Processing Unit (CPU) utilization based on user-configured CPU utlization thresholds for the supervisor and line cards. NetFlow will lower its CPU consumption when utilization exceeds the configured threshold, and vice versa.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for CPU Friendly NetFlow Export" section.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

Prerequisites for CPU Friendly NetFlow Export

Information About CPU Friendly NetFlow Export

How to Configure CPU Friendly NetFlow Export

Configuration Examples for CPU Friendly NetFlow Export

Additional References

Feature Information for CPU Friendly NetFlow Export

Prerequisites for CPU Friendly NetFlow Export

You are familiar with the information in the "Cisco IOS Flexible NetFlow Overview" module.

The networking device must be running a Cisco IOS release that supports Flexible NetFlow. See the "Cisco IOS Flexible NetFlow Features Roadmap" module for a list of Cisco IOS software releases that support Flexible NetFlow.

IPv4 Traffic

The networking device must be configured for IPv4 routing.

One of the following must be enabled on your router and on any interfaces on which you want to enable Flexible NetFlow: Cisco Express Forwarding or distributed Cisco Express Forwarding.

IPv6 Traffic

The networking device must be configured for IPv6 routing.

One of the following must be enabled on your router and on any interfaces on which you want to enable Flexible NetFlow: Cisco Express Forwarding IPv6 or distributed Cisco Express Forwarding IPv6.

Information About CPU Friendly NetFlow Export

Overview of CPU Friendly NetFlow Export

Overview of CPU Friendly NetFlow Export

The number and complexity of flow records to be exported is the prime cause of CPU use in NetFlow. The CPU Friendly NetFlow Export feature (also known as Yielding NetFlow Data Export, or Yielding NDE) monitors CPU use for both the supervisor and line cards according to user-configured thresholds and dynamically adjusts the rate of export as needed.

How to Configure CPU Friendly NetFlow Export

This section contains the following tasks:

Configuring the CPU Utilization Threshold (required)

Configuring the CPU Utilization Threshold

To configure the CPU utilization threshold, the threshold above which NetFlow decreases its CPU consumption, perform the following required task.

SUMMARY STEPS

1. enable

2. configure terminal

3. flow hardware [egress | export threshold total-cpu-threshold-percentage [linecard linecard-threshold-percentage ] | usage notify {input | output} [table-threshold-percentage seconds]]

4. end

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enable

Example:

Router> enable

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2 

configure terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 3 

flow hardware [egress | export threshold total-cpu-threshold-percentage [linecard linecard-threshold-percentage ] | usage notify {input | output} [table-threshold-percentage seconds]]

Example:

Router(config)# flow hardware export threshold 25 linecard 25

Configures the CPU utilization threshold up to which NetFlow export is permitted.

Step 4 

end

Example:

Router(config)# end

Ends the current configuration session and returns to privileged EXEC mode.

Step 5 

show platform flow [aging | {export | usage | table-contention {aggregate | detailed | summary} }[instance | module] | {ip | ipv6} [count | destination | instance | module | multicast | protocol | source] | {layer2 | mpls } [count | instance | module]]

Example:

Router# show platform flow export

Verifies the configuration of the CPU utilization threshold.

Configuration Examples for CPU Friendly NetFlow Export

This section provides the following configuration examples:

Example: Configuring CPU Utilization Thresholds for NetFlow Export

Example: Configuring CPU Utilization Thresholds for NetFlow Export

The following example shows how to configure CPU utilization thresholds for NetFlow export.

This sample starts in global configuration mode.

!
flow hardware export threshold 25
flow hardware export threshold 25 linecard 25
end
! 

Additional References

Related Documents

Related Topic
Document Title

Cisco IOS commands

Cisco IOS Master Commands List, All Releases

Overview of Flexible NetFlow

"Cisco IOS Flexible NetFlow Overview"

Flexible NetFlow Feature Roadmap

"Cisco IOS Flexible NetFlow Features Roadmap"

Emulating original NetFlow with Flexible NetFlow

"Getting Started with Configuring Cisco IOS Flexible NetFlow"

Configuring flow exporters to export Flexible NetFlow data.

"Configuring Data Export for Cisco IOS Flexible NetFlow with Flow Exporters"

Customizing Flexible NetFlow

"Customizing Cisco IOS Flexible NetFlow Flow Records and Flow Monitors"

Configuring Flexible NetFlow using predefined records

"Configuring Cisco IOS Flexible NetFlow with Predefined Records"

Using Flexible NetFlow Top N Talkers to analyze network traffic

"Using Cisco IOS Flexible NetFlow Top N Talkers to Analyze Network Traffic"

Configuring IPv4 multicast statistics support for Flexible NetFlow

"Configuring IPv4 Multicast Statistics Support for Cisco IOS Flexible NetFlow"

Configuration commands for Flexible NetFlow

Cisco IOS Flexible NetFlow Command Reference


Standards

Standard
Title

No new or modified standards are supported, and support for existing standards has not been modified.


MIBs

MIB
MIBs Link

No new or modified MIBs are supported.

To locate and download MIBs for selected platforms, Cisco software releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs


RFCs

RFC
Title

No new or modified RFCs are supported , and support for existing standards has not been modified.


Technical Assistance

Description
Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html


Feature Information for CPU Friendly NetFlow Export

Table 1 lists the release history for this feature.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


Table 1 Feature Information for CPU Friendly NetFlow Export

Feature Name
Releases
Feature Information

Flexible NetFlow

12.2(33)SRC12.2(50)SY 12.4(9)T

Flexible NetFlow is introduced.

Support for this feature was added for Cisco 7200 series routers in Cisco IOS Release 12.2(33)SRC.

Information about the Flexible NetFlow feature is included in the following sections:

Prerequisites for CPU Friendly NetFlow Export

The following commands were introduced or modified: cache (Flexible NetFlow), clear flow exporter, clear flow monitor, clear sampler, collect counter, collect flow, collect interface, collect ipv4, collect ipv4 destination, collect ipv4 fragmentation, collect ipv4 section, collect ipv4 source, collect ipv4 total-length, collect ipv4 ttl, collect routing, collect timestamp sys-uptime, collect transport, collect transport icmp ipv4, collect transport tcp, collect transport udp, debug flow exporter, debug flow monitor, debug flow record, debug sampler, description (Flexible NetFlow), destination, dscp (Flexible NetFlow), exporter, flow exporter, flow monitor, flow platform, flow record, ip flow monitor, match flow, match interface (Flexible NetFlow), match ipv4, match ipv4 destination, match ipv4 fragmentation, match ipv4 section, match ipv4 source, match ipv4 total-length, match ipv4 ttl, match routing, match transport, match transport icmp ipv4, match transport tcp, match transport udp, mode (Flexible NetFlow), option (Flexible NetFlow), record, sampler, show flow exporter, show flow interface, show flow monitor, show flow record, show sampler, source (Flexible NetFlow), statistics packet, template data timeout, transport (Flexible NetFlow).

CPU Friendly NetFlow Export

12.2(50)SY

The CPU Friendly NetFlow Export feature provides the capability for the software NetFlow modules to adjust their Central Processing Unit (CPU) utilization based on user configured CPU thresholds for the supervisor and line cards, so that when the total CPU utilization is above the configured threshold, NetFlow decreases its CPU consumption, and vice versa.

Information about the CPU Friendly NetFlow Export feature is included in the following sections:

Prerequisites for CPU Friendly NetFlow Export

Information About CPU Friendly NetFlow Export

How to Configure CPU Friendly NetFlow Export

Configuration Examples for CPU Friendly NetFlow Export

The following commands were introduced or modified: flow hardware, show platform flow.