Guest

Cisco IOS Software Releases 12.4 T

NetFlow Dynamic Top Talkers CLI

  • Viewing Options

  • PDF (151.9 KB)
  • Feedback
NetFlow Dynamic Top Talkers CLI

Table Of Contents

NetFlow Dynamic Top Talkers CLI


NetFlow Dynamic Top Talkers CLI


The NetFlow Dynamic Top Talkers CLI feature gives you an overview of the highest volume traffic in your network by aggregating flows on a common field. For example, you can aggregate all of the flows for a destination network by aggregating them on the destination IP address prefix. There are over 20 fields from flows that you can aggregate the highest volume traffic on.

Configuration Information

Configuration information is included in the "Detecting and Analyzing Network Threats With NetFlow" module in the "Configuring Advanced Use of NetFlow for Analyzing Network Traffic Data chapter" of the Cisco IOS NetFlow Configuration Guide, Release 12.4T at the following URL:

http://www.cisco.com/en/US/docs/ios/netflow/configuration/guide/nf_detct_analy_thrts_ps6441_TSD_Products_Configuration_Guide_Chapter.html

Command Reference Information

Command reference information is included in the Cisco IOS NetFlow Command Reference, at the following URL:

http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_book.html

New or Modified Commands

The following commands are new or modified for this feature:

show ip flow top

List of All Release 12.4T Commands

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:

http://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_book.html

List of All New, Modified, Removed, and Replaced Release 12.4T Commands

Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:

https://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_nml.html