Table Of Contents
OER - Application Aware Routing with Static Application Mapping
The OER - Application Aware Routing with Static Application Mapping feature introduces the ability to configure standard applications using just one keyword. In Cisco IOS Release 12.4(9)T, and prior releases, the definition of application traffic involves some awkward configuration. This feature also introduces a learn list configuration mode that allows Optimized Edge Routing (OER) policies to be applied to traffic classes profiled in a learn list. Different policies can be applied to each learn list. New traffic-class and match traffic-class commands are introduced to simplify the configuration of traffic classes that OER can automatically learn, or that can be manually configured.
Configuration information is included in the "Using OER to Profile the Traffic Classes" chapter of the Cisco IOS Optimized Edge Routing Configuration Guide, Release 12.4T, at the following URL:
The following sections provide information about this feature:
•Learn List Configuration Mode
•Static Application Mapping Using OER
•Application Traffic Class Configuration Using OER
•Configuring Application Aware Routing to Profile the Traffic Classes in Cisco IOS Release 12.4(15)T and Later Releases
•Configuring Application Aware Routing to Profile the Traffic Classes in Cisco IOS Release 12.4(15)T and Later Releases: Examples
For a complete list of features included in the "Using OER to Profile the Traffic Classes" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
The following commands are new or modified for this feature:
•clear oer master traffic-class
•match traffic-class access-list
•match traffic-class application
•match traffic-class prefix-list
•show oer master learn list
•show oer master traffic-class
Detailed information about these commands is included in the Cisco IOS Optimized Edge Routing Command Reference, Release 12.4T, at the following URL:
Master Command Lists
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:
List of All New, Modified, Removed, and Replaced Release 12.4T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.