Table Of Contents
HTTP TACAC+ Accounting Support
The HTTP TACAC+ Accounting Support feature adds the ability to log accounting records for HTTP transfers to the Cisco IOS HTTP(S) 1.1 server.
Network administrators track network changes by configuring an accounting mechanism. This is accomplished by installing an accounting server on the network and configuring each device connected to the network to log the state changes (or events) it experiences to this accounting server. State changes occur for several reasons such as the following:
•Administrator configuring the device
•Remote users configuring the device
•Local users configuring the device
Each such event is framed as an accounting record, which is sent to the accounting server.
The HTTP TACAC+ Accounting Support feature adds the capability to generate and log accounting records for these HTTP requested configuration changes.
Configuration information is included in the "HTTP 1.1 Web Server and Client" module under the "Configuring HTTP Services" section of the Cisco IOS Network Management Configuration Guide, Release 12.4T, at the following URL:
The following sections provide information about this feature:
•How to Configure the HTTP 1.1 Web Server
•Configuration Examples for the HTTP 1.1 Web Server
For a complete list of features included in the "HTTP 1.1 Web Server and Client" module, see the Feature Information table located toward the end of the module.
Command Reference Information
The following command is new or modified for this feature:
•ip http accounting commands
Detailed information about this command is included in the Cisco IOS Network Management Command Reference, Release 12.4T, at the following URL:
Master Commands Lists
Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS release.
Cisco IOS new, modified, removed, and replaced commands lists provide an alphabetized list of all new, modified, removed, and replaced commands in a Cisco IOS release.
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:
List of All New, Modified, Removed, and Replaced Release 12.4T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.