Table Of Contents
DHCP Relay Accounting
The DHCP Relay Accounting feature allows a Cisco IOS DHCP relay agent to send a RADIUS accounting start packet when an address is assigned to a client and a RADIUS accounting stop packet when the address is released. This feature is enabled by using the accounting command with relay pools that use the relay destination command in DHCP pool configuration mode.
Configuration information is included in the "Configuring DHCP Enhancements for Edge-Session Management" module in the Cisco IP Addressing Configuration Guide, Release 12.4T, at the following URL:
The following sections provide information about this feature:
•Configuring a Relay Pool with a Relay Source and Destination
•Configuring a Relay Pool for a Remote DHCP Server
For a complete list of features included in the "Configuring DHCP Enhancements for Edge-Session Management" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the "DHCP Commands" chapter of the Cisco IOS IP Addressing Services Command Reference, Release 12.4T, at the following URL:
New or Modified Commands
There are no new or modified commands introduced by this feature.
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:
List of All New, Modified, Removed, and Replaced Release 12.4T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL: