Cisco IOS Software Releases 12.4 T

Flow-Based QoS for GGSN

  • Viewing Options

  • PDF (153.8 KB)
  • Feedback
Flow-Based QoS for GGSN

Table Of Contents

Flow-Based QoS for GGSN

Flow-Based QoS for GGSN

The Cisco IOS quality of service (QoS) software allows you to classify and police traffic on your network. The Flow-Based QoS for GGSN feature allows you to enable per-Packet-Data-Protocol (PDP) traffic flow classification and policing on a Gateway GPRS Support Node (GGSN).

Configuration Information

Configuration information is included in the "Configuring QoS on the GGSN" chapter of the Cisco GGSN Release 6.0 Configuration Guide, Cisco IOS Release 12.4(2)XB, at the following URL:

Note To configure the Flow-Based QoS for GGSN feature, follow the instructions in the "Configuring Per-PDP Policing" section.

Command Reference Information

Command reference information is included in the Cisco IOS Quality of Service Solutions Command Reference, Release 12.4T, at the following URL:

New or Modified Commands

The following commands are new or modified for this feature:

match flow pdp

police rate pdp

List of All Release 12.4T Commands

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:

List of All New, Modified, Removed, and Replaced Release 12.4T Commands

Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL: