Call Detail Records (CDR) Feature Correlation ID for Supplementary Features

Table Of Contents

Call Detail Records (CDR) Feature Correlation ID for Supplementary Features

Call Detail Records (CDR) Feature Correlation ID for Supplementary Features

---

This feature captures additional information in CDRs for voice calls that are transferred or forwarded on phones controlled by Cisco Unified CallManager Express (Cisco Unified CME) or Cisco Unified Survivable Remote Site Telephony (Cisco Unified SRST). It includes a unique correlation ID that identifies a given call feature across all legs in a call. CDR information can be output in RADIUS VSAs or system log (syslog) messages.

Configuration Information

Configuration information and a description of the feature VSA is included in CDR Accounting for Cisco IOS Voice Gateways at the following URL:

•http://www.cisco.com/en/US/docs/ios/voice/cdr/developer/guide/cdrdev.html

Command Reference Information

Command reference information is included in the Cisco IOS Voice Command Reference and the Cisco IOS Debug Command Reference, Release 12.4T, at the following URLs:

•http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_book.html

•http://www.cisco.com/en/US/docs/ios/debug/command/reference/db_book.html

New or Modified Commands

The following command is new for this feature:

•debug voip application accounting

List of All Release 12.4T Commands

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T at the following URL:

•http://www.cisco.com/en/US/products/ps6441/prod_command_reference_list.html

List of All New, Modified, Removed, and Replaced Release 12.4T Commands

Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T document at the following URL:

•http://www.cisco.com/en/US/products/ps6441/products_product_index09186a00805db026.html

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2006 Cisco Systems, Inc. All rights reserved.