Release Notes for the Cisco VG224 Analog Gateway for Cisco IOS Release 12.4(11)XW
Available Languages
Table Of Contents
Release Notes for the Cisco VG224 Analog Gateway for Cisco IOS Release 12.4(11)XW
Determining Your Software Release
Upgrading to a New Software Release
New Hardware Features in Release 12.4(11)XW10
New Software Features in Release 12.4(11)XW10
New Hardware Features in Release 12.4(11)XW9
New Software Features in Release 12.4(11)XW9
New Hardware Features in Release 12.4(11)XW8
New Software Features in Release 12.4(11)XW8
New Hardware Features in Release 12.4(11)XW7
New Software Features in Release 12.4(11)XW7
New Hardware Features in Release 12.4(11)XW5
New Software Features in Release 12.4(11)XW5
New Hardware Features in Release 12.4(11)XW3
New Software Features in Release 12.4(11)XW3
New Hardware Features in Release 12.4(11)XW2
New Software Features in Release 12.4(11)XW 2
Cisco Unified Communications Manager Express 4.2
New Hardware Features in Release 12.4(11)XW1
New Software Features in Release 12.4(11)XW 1
New Hardware Features in Release 12.4(11)XW
New Software Features in Release 12.4(11)XW
Open Caveats - Release 12.4(11)XW10
Resolved Caveats - Release 12.4(11)XW10
Open Caveats - Release 12.4(11)XW9
Resolved Caveats - Release 12.4(11)XW9
Open Caveats - Release 12.4(11)XW8
Resolved Caveats - Release 12.4(11)XW8
Open Caveats - Cisco IOS Release 12.4(11)XW7
Resolved Caveats - Cisco IOS Release 12.4(11)XW7
Open Caveats - Cisco IOS Release 12.4(11)XW6
Resolved Caveats - Cisco IOS Release 12.4(11)XW6
Open Caveats - Cisco IOS Release 12.4(11)XW5
Resolved Caveats - Cisco IOS Release 12.4(11)XW5
Open Caveats - Cisco IOS Release 12.4(11)XW3
Resolved Caveats - Cisco IOS Release 12.4(11)XW3
Open Caveats - Cisco IOS Release 12.4(11)XW2
Resolved Caveats - Cisco IOS Release 12.4(11)XW2
Open Caveats - Cisco IOS Release 12.4(11)XW1
Resolved Caveats -Cisco IOS Release 12.4(11)XW1
Open Caveats - Cisco IOS Release 12.4(11)XW
Resolved Caveats -Cisco IOS Release 12.4(11)XW
Cisco IOS Software Documentation Set
Release Notes for the Cisco VG224 Analog Gateway for Cisco IOS Release 12.4(11)XW
First Released: May 4, 2007Last Revised: February 5, 2009Cisco IOS Release 12.4(11)XW10OL-13464-08 Eighth ReleaseThese release notes for the Cisco VG224 analog gateway describe the product-related enhancements provided in Cisco IOS Release 12.4(11)XW. These release notes are updated as needed. Use these release notes with the Cross-Platform Release Notes for Cisco IOS Release 12.4T and About Cisco IOS Release Notes.
For a list of the software caveats that apply to the Release 12.4(11)XJ releases, see the "Caveats" section, and the online Caveats for Cisco IOS Release 12.4T. The caveats document is updated for every 12.4T maintenance release.
Contents
These release notes describe the following topics:
Introduction
Cisco IOS Release 12.4(11)XW supports the Cisco VG224 analog gateway.
The Cisco VG224 series is a family of analog gateways. The Cisco VG224 has 24-port FXS through an RJ-21 connector and two 10/100 Base T interfaces.
System Requirements
This section describes the system requirements for Cisco IOS Release 12.4(11)XW and includes the following sections:
•
Determining Your Software Release
•
Memory Requirements
Table 1 lists the memory requirements of the Cisco IOS feature sets for the Cisco VG224 analog gateway for Cisco IOS Release 12.4(11)XW.
The Cisco VG224 analog gateway is available with a 32-MB Flash memory card.
Supported Hardware
Cisco IOS Release 12.4(11)XW supports the following platforms:
•
For descriptions of existing hardware features and supported modules, see the hardware installation guides, configuration and command reference guides, and additional documents specific to the Cisco VG200 series routers, which are at
http://www.cisco.com/en/US/products/hw/gatecont/ps2250/tsd_products_support_series_home.html
Determining Your Software Release
To determine the version of Cisco IOS software currently running on your Cisco VG200 series router, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.Upgrading to a New Software Release
For general information about upgrading to a new software release, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.s
Feature Set Tables
For information about feature set tables, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.
New and Changed Information
This section contains the following information:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
New Hardware Features in Release 12.4(11)XW10
There are no new hardware features in this release.
New Software Features in Release 12.4(11)XW10
There are no new software features in this release.
New Hardware Features in Release 12.4(11)XW9
There are no new hardware features in this release.
New Software Features in Release 12.4(11)XW9
There are no new software features in this release.
New Hardware Features in Release 12.4(11)XW8
No new hardware products are in this release.
New Software Features in Release 12.4(11)XW8
No new software products are in this release
New Hardware Features in Release 12.4(11)XW7
No new hardware products are in this release.
New Software Features in Release 12.4(11)XW7
No new software products are in this release
New Hardware Features in Release 12.4(11)XW5
No new hardware products are in this release.
New Software Features in Release 12.4(11)XW5
No new software products are in this release
New Hardware Features in Release 12.4(11)XW3
No new hardware products are in this release.
New Software Features in Release 12.4(11)XW3
No new software products are in this release.
New Hardware Features in Release 12.4(11)XW2
No new hardware products are in this release.
New Software Features in Release 12.4(11)XW 2
Cisco Unified Communications Manager Express 4.2
Media Encryption (SRTP) on Cisco Unified Communications Manager Express feature provides the following secure voice call capabilities: Secure call control signaling and media streams in Cisco Unified Communications Manager Express (Unified CME) networks using Secure Real-Time Transport Protocol (SRTP) and H.323 protocols.
1.
2.
3.
For more information on this feature, go to:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t15/itsdsp.html
New Hardware Features in Release 12.4(11)XW1
No new hardware products are in this release.
New Software Features in Release 12.4(11)XW 1
No new software products are in this release.
New Hardware Features in Release 12.4(11)XW
No new hardware products or software features are supported in Cisco IOS Release 12.4(11)XW.
New Software Features in Release 12.4(11)XW
The following new feature is supported on the Cisco 3700 series router in Cisco IOS Release 12.4(11)XW:
•
Voice Quality Enhancements
DSP voice quality metrics improve your ability to monitor, analyze, and ultimately meet your quality of service (QoS) objectives for your network. For more information, go to:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t15/vqmetric.html
New Features in Release 12.4T
For information regarding the features supported in Cisco IOS Release 12.4T, see the Cross-Platform Release Notes links at: http://www.cisco.com/en/US/products/ps6441/prod_release_notes_list.html
Limitations and Restrictions
There are no known limitations or restrictions in this release.
Caveats
For general information on caveats and the bug toolkit, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.
This section contains the following caveat information:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Open Caveats - Release 12.4(11)XW10
There are no open caveats in this release.
Resolved Caveats - Release 12.4(11)XW10
•
Multiple Cisco products are affected by denial of service (DoS) vulnerabilities that manipulate the state of Transmission Control Protocol (TCP) connections. By manipulating the state of a TCP connection, an attacker could force the TCP connection to remain in a long-lived state, possibly indefinitely. If enough TCP connections are forced into a long-lived or indefinite state, resources on a system under attack may be consumed, preventing new TCP connections from being accepted. In some cases, a system reboot may be necessary to recover normal system operation. To exploit these vulnerabilities, an attacker must be able to complete a TCP three-way handshake with a vulnerable system.
In addition to these vulnerabilities, Cisco Nexus 5000 devices contain a TCP DoS vulnerability that may result in a system crash. This additional vulnerability was found as a result of testing the TCP state manipulation vulnerabilities.
Cisco has released free software updates for download from the Cisco website that address these vulnerabilities. Workarounds that mitigate these vulnerabilities are available.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090908-tcp24.shtml.
•
A vulnerability in the handling of IP sockets can cause devices to be vulnerable to a denial of service attack when any of several features of Cisco IOS software are enabled. A sequence of specially crafted TCP/IP packets could cause any of the following results:
–
–
–
–
Workarounds that mitigate this vulnerability are available in the "workarounds" section of the advisory. The advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090325-ip.shtml
•
Devices that are running Cisco IOS Software and configured for Mobile IP Network Address Translation (NAT) Traversal feature or Mobile IPv6 are vulnerable to a denial of service (DoS) attack that may result in a blocked interface.
Cisco has released free software updates that address these vulnerabilities.
This advisory is posted at the following link http://www.cisco.com/warp/public/707/cisco-sa-20090325-mobileip.shtml
•
Devices that are running Cisco IOS Software and configured for Mobile IP Network Address Translation (NAT) Traversal feature or Mobile IPv6 are vulnerable to a denial of service (DoS) attack that may result in a blocked interface.
Cisco has released free software updates that address these vulnerabilities.
This advisory is posted at the following link http://www.cisco.com/warp/public/707/cisco-sa-20090325-mobileip.shtml
•
The server side of the Secure Copy (SCP) implementation in Cisco IOS software contains a vulnerability that could allow authenticated users with an attached command-line interface (CLI) view to transfer files to and from a Cisco IOS device that is configured to be an SCP server, regardless of what users are authorized to do, per the CLI view configuration. This vulnerability could allow valid users to retrieve or write to any file on the device's file system, including the device's saved configuration and Cisco IOS image files, even if the CLI view attached to the user does not allow it. This configuration file may include passwords or other sensitive information.
The Cisco IOS SCP server is an optional service that is disabled by default. CLI views are a fundamental component of the Cisco IOS Role-Based CLI Access feature, which is also disabled by default. Devices that are not specifically configured to enable the Cisco IOS SCP server, or that are configured to use it but do not use role-based CLI access, are not affected by this vulnerability.
This vulnerability does not apply to the Cisco IOS SCP client feature.
Cisco has released free software updates that address this vulnerability.
There are no workarounds available for this vulnerability apart from disabling either the SCP server or the CLI view feature if these services are not required by administrators.
This advisory is posted at the following link:
http://www.cisco.com/warp/public/707/cisco-sa-20090325-scp.shtml.
•
A vulnerability exists in the Session Initiation Protocol (SIP) implementation in Cisco IOS software that can be exploited remotely to cause a reload of the Cisco IOS device.
Cisco has released free software updates that address this vulnerability. There are no workarounds available to mitigate the vulnerability apart from disabling SIP, if the Cisco IOS device does not need to run SIP for VoIP services. However, mitigation techniques are available to help limit exposure to the vulnerability.
This advisory is posted at the following link:
http://www.cisco.com/warp/public/707/cisco-sa-20090325-sip.shtml.
•
Symptoms: Several features within Cisco IOS software are affected by a crafted UDP packet vulnerability. If any of the affected features are enabled, a successful attack will result in a blocked input queue on the inbound interface. Only crafted UDP packets destined for the device could result in the interface being blocked, transit traffic will not block the interface.
Cisco has released free software updates that address this vulnerability.
Workarounds that mitigate this vulnerability are available in the workarounds section of the advisory. This advisory is posted at the following link: http://www.cisco.com/warp/public/707/cisco-sa-20090325-udp.shtml.
•
Cisco IOS software contains two vulnerabilities within the Cisco IOS WebVPN or Cisco IOS SSLVPN feature (SSLVPN) that can be remotely exploited without authentication to cause a denial of service condition. Both vulnerabilities affect both Cisco IOS WebVPN and Cisco IOS SSLVPN features:
1.
2.
Cisco has released free software updates that address these vulnerabilities. There are no workarounds that mitigate these vulnerabilities. This advisory is posted at the following link: http://www.cisco.com/warp/public/707/cisco-sa-20090325-webvpn.shtml
•
Symptoms: SSLVPN service stops accepting any new SSLVPN connections.
Conditions: A device configured for SSLVPN may stop accepting any new SSLVPN connections, due to a vulnerability in the processing of new TCP connections for SSLVPN services. If "debug ip tcp transactions" is enabled and this vulnerability is triggered, debug messages with connection queue limit reached will be observed. This vulnerability is documented in two separate Cisco bug IDs, both of which are required for a full fix: CSCso04657 and CSCsg00102.
CSCin76666 H.245 listener socket closed before H.245 connection is established.Symptom Intermittent outbound call failures using CallManager and Outbound Fast Start.
Conditions
Workaround
CSCse59336 Three way call conferencing is not working properly.Symptom MGCP three-way call conferencing may fail because of an abrupt onhook event at the originating endpoint.
Conditions
Workaround
CSCsg35148 Interim record is sent with stop-only acct-list from RADIUS.Symptom Interim record is seen.
Conditions
Workaround
CSCsj04758 Wrong codec bytes on the SIP leg of ipipgw for SIP--->H323 (g726).Symptom Wrong codec bytes are displayed on the SIP leg of ipipgw for SIP--->H323 interworking.
Conditions
Workaround
CSCsj75250 crafted SCTP packet reloads router.Symptom Crafted SCTP packet may reset router.
Conditions
Workaround
CSCsk40676 C1812 12.4.15.T / certain packet sizes block inside interface of ezvpn conn.Symptom The inside interface of a Cisco router running EZVPN may become unresponsive when sending ICMP messages from a remote VPN client connection.
Conditions
Workaround
CSCsm45113 RIB installs duplicate routes for the same prefixSymptom Router may install duplicate routes or incorrect route netmask into routing table. It could happen on any routing protocol. Additionally, for OSPF, crash was observed.
Conditions
Workaround
Further Problem Description: The <CmdBold>clear ip route *<noCmdBold> command can correct the routing table until the next poll of ipRouteTable MIB.
CSCsm49826 c7206VXR/NPE400 reloaded due to bus error running 12.4(15)T2 and T3.Symptom H323 gateways crash under load.
Conditions
Workaround
c2691-15(config)#voice service voip
c2691-15(conf-voi-serv)#h323
c2691-15(conf-serv-h323)#no h245 simultaneous-connection-handle
CSCso47738 No Voice Path For SIP to H323 calls.Symptom Gateway sends 200 OK with media direction as SENDRECV for a reINVITE with offer having media direction INACTIVE.
Conditions
Workaround
CSCso80830 W button should be lit on for undefined primary ephone.Symptom The Watch button is not lit on if no watched phone for this watched DN. Ring back tone is heard when calling to this DN.
Conditions
Workaround
CSCsq04046 GUI: IOS SYSfeature undefined" error seen on help->about.Symptom Error when accessing CME GUI Help->About page.
Conditions
Workaround
CSCsr27960 Traceback observed after configuring credential under sip-ua.Symptom Traceback observed when configuring credentials CLI under sip-ua.
Conditions
Workaround
CSCsr78883 Router console displays messages "Data corruption Data Inconsistency.Symptom There will be traceback on configuring mls qos cos pass-through dscp in supporting interface mode.
Conditions
Workaround
Further Problem Description: Due to the buffer overflow, there will be traceback when configuring the QoS in the supporting interface. Currently, the CLI is not supported in most network modules, and thus,is invisible to the users.
CSCsu36827 CUE clock does not sync up with the CME using NTP.Symptom The CUE clock does not synch up with the CME using NTP.
Conditions
Workaround
CSCsu59847 The Content-Type used by T.37 should use a mutipart subtype of "mixed".Symptom Certain mail clients may experience problems viewing the TIFF attachments sent by a Cisco T.37 OnRamp gateway because they do not support the Content-Type of multipart/fax-message that Cisco uses in it's T.37 Store-and_forward Fax implementation.
Conditions
Workaround
CSCsw50802 Smart Init Fails to recognize HWICs with smart cookie.Symptom No extra I/O mem is allocated for some HWICs.
Conditions
Workaround
Open Caveats - Release 12.4(11)XW9
There are no open caveats in this release.
Resolved Caveats - Release 12.4(11)XW9
CSCsq13348The Cisco IOS Intrusion Prevention System (IPS) feature contains a vulnerability in the processing of certain IPS signatures that use the SERVICE.DNS engine. This vulnerability may cause a router to crash or hang, resulting in a denial of service condition.
Cisco has released free software updates that address this vulnerability. There is a workaround for this vulnerability.
NOTE: This vulnerability is not related in any way to CVE-2008-1447 - Cache poisoning attacks. Cisco Systems has published a Cisco Security Advisory for that vulnerability, which can be found at http://www.cisco.com/en/US/products/products_security_advisory09186a00809c2168.shtml.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-iosips.shtml.
CSCek52673 Single crafted udp packet reloads router with dhcp serverSymptom A router that has DHCP server enabled could reload after receiving a malformed UDP packet.
Workaround
CSCek71149 Error message when dir is issuedSymptom "Error getting file system status (Unknown error 0) or (Bad file number)" was observed when dir <archive/system/tmpsys:> was issued. The rest of the file systems have no problem (i.e. dir nvram/flash/usbtoken0:... etc)
Conditions
Workaround
CSCsg42546 Reload when MGCP CRCX has sRTP and V150 params in LCOSymptom An MGCP gateway reloads when receiving Secure Real-Time Transport Protocol (SRTP) and V.150 parameters in the local connection options of a Create Connection (CRCX) message.
Conditions
Workaround
CSCsj32422 CBWFQ:Unable to reconfigure the policy map after exceeding the bandwidthSymptom Once policy map is configured and bandwidth is exceeded while dividing amongst the classes, re-configuration of the policy map is not possible.
Conditions
Workaround
CSCsj50773 High cpu when querying ipRouteTable MIBSymptom Performing the snmpwalk on the ipRouteTable MIB may cause high CPU and reloads.
Conditions
Workaround
snmp-server view cutdown 1.3.6.1.2.1.4.21 exclude
snmp-server view cutdown internet included
snmp-server community <comm> view cutdown RO
This view restricts the objects that the NMS can poll. It excludes access to the ipRouteTable, but allows access to the other MIBs.
CSCsj82622 Crash editing ACL cce_dp_named_db_ip_access_list_impureSymptom A router may crash when you configure an access control list (ACL) that has at least 50-60 ACEs (about 100 nodes) that is used in policy maps that are already applied to an interface or when you boot the router after having made the configuration change. When the crash occurs, the following error message is generated: %ALIGN-1-FATAL: Corrupted program counter pc=0x0 , ra=0x0 , sp=0x66EFB8A0
Conditions
Workaround
CSCsk27147 SNMP stops responding while polling from CISCO-MEMORYPOOL-MIBSymptom The following SNMP is incorrectly generated:"%SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input queue full". This issue is affecting the CISCO-MEMORYPOOL-MIB instead.
Conditions
Workaround
snmp-server view public-view iso included
snmp-server view public-view ciscoMemoryPoolMIB excluded.
Apply this view to the RW community string. This view will exclude only ciscoMemoryPoolMib, all other MIBs will be available.
CSCsk39642 router crash when copying saved config to running configSymptom A router crashes.
Conditions
Workaround
CSCsk94676 dlsw with tbridge, COMMON_FIB-4-FIBIDBMISMATCHSymptom Transparent bridging into DLSw does not work.The following messages are displayed:
*Jan 29 19:00:50.727: %COMMON_FIB-4-FIBHWIDBMISMATCH: Mis-match between hwidb DLSw Port0 (ifindex 5) and fibhwidb GigabitEthernet2/3 (ifindex 5)-Traceback= 407C7004 407C8A38 407C7CEC 407C7EE4 413C9900 41BCE138 41BCCD54 41BCCFA8 41BCA330 413C0128 413C0114
*Jan 29 19:00:50.727: %COMMON_FIB-4-FIBMISSINGHWIDB: No fibhwidb while initializing fibidb for DLSw Port0 (if_number 5)
-Traceback= 407C83D4 407C8A9C 407C7CEC 407C7EE4 413C9900 41BCE138 41BCCD54 41BCCFA8 41BCA330 413C0128 413C0114
Conditions
Workaround
i.e.
As global command:
no dlsw bridge-group X
and on the interface:
no bridge-group X
on the interface replace it with:
dlsw transparent redundancy-enable 9999.9999.9999
CSCsl70722 Router crash polling rttmon mib with active IP SLA probesSymptom A router running Cisco IOS may crash due to watchdog timeout.
Conditions
Workaround
CSCsm17281 Router crashes when adding ACL line to Service PolicySymptom Device running 12.4(17.6)T will crash after adding line to an access-list attached to a service policy
Workaround
CSCsm77199 DATACORRUPTION-1-DATAINCONSISTENCY HTTP_FIND_FLASH_FILESymptom If the HTTP secure server capability is present, Switch shows the error message "%DATACORRUPTION-1-DATAINCONSISTENCY: copy error" with tracebacks after initializing the supervisor. This error message can be verified in show logging output.
Conditions
Workaround
CSCso09539 ACK not sent to 200 OK from CUE during h323 slowstart -- sip delayed medSymptom Incoming H323 slow start call to CME when forwarded to voicemail in CUE may result in no audio.
Conditions
Workaround
•
and H323 slowstart using voice-class h323.
•
H323 faststart using voice-class h323.
CSCsq42134 JPN: 7921 XML Services are displayed as squaresSymptom 7921 directories are displayed as squires in CME Userlocale: JP environment.
Conditions
CME: 4.2 (IOS 12.4(11)XW7)
Locale File : CME-locale-jp_JP-4.1.0.1.tar
Workaround
CSCsq44013 View used twice with logging enabledSymptom The CPE does not reply to the DNS query from the client for the first try, first response is being dropped.
Conditions
The view is used twice rather than once.
Workaround
CSCsq64715 EM login credential could be set to stack junk in error conditionSymptom EM login username and password may be set to random values in process stack in case the actual input from the phone is in an invalid format. And if both string picked up from the stack happen to match a username/password pair in a configured user profile, EM will login the user accidentally.
Workaround
CSCsq67163 IPSLA RTP operation crashes the routerSymptom Scheduling of IP SLA RTP operation crashes the router.
Conditions
Workaround
CSCsq74999 SCCP FXS ports connected to FAX machines lock upSymptom FXS that have fax/modems connected intermittently fail. Once they are in this stuck state, an incoming call to them will not ring the line, there will be no output in debug vpm sig. Outbound calls/faxes typically still work.
FXS port must be SCCP controlled. The problem is likely to occur when the pots leg is disconnected before the voip leg. If this occurs the port can go into this "stuck" state. Any subsequent calls will not ring the fax machine on this port.
Workaround
voice service voip
fax protocol none
will prevent the problem from happening. Removing the SCCP config from the ports will prevent it from happening too.
CSCsr01058 SPLIT_DNS: Debug msg Forwarding back reply is missingSymptom An IOS device configured as a DNS server is vulnerable to forged answer attacks. In this type of attack, a malicious user can cause the IOS DNS server to accept a forged answer that associates a name with an IP address chosen by the malicious user. This answer ends up in the cache of the DNS server. This attack can be made more difficult by randomizing both the DNS transaction ID and the UDP source port number that the DNS server (the IOS device) uses to relay DNS queries for domain it is not authorized for.
Conditions
Workaround
This is a security issue. The problem, however, only exists for customers who are running the IOS DNS Server/Forwarder and this is presumed to not be the usual case.
CSCsr18200 busy tone issue when receiving a 183 MessageSymptom A busy tone is not heard when a 183 message is received before a 4xx busy message.
Conditions
Workaround
CSCsr71715 Call display missing when park or xfer HW conference callSymptom Caller ID and Call bubble missing when a HW conference call is parked or Xfere
Open Caveats - Release 12.4(11)XW8
There are no open caveats in this release.
Resolved Caveats - Release 12.4(11)XW8
•
Cisco IOS devices that are configured for Cisco Unified Communications Manager Express (CME) and the Extension Mobility feature are vulnerable to a buffer overflow vulnerability. Successful exploitation of this vulnerability may result in the execution of arbitrary code or a Denial of Service (DoS) condition on an affected device.
Cisco has released free software updates that address this vulnerability.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090923-cme.shtml.
CSCse70333 CFwdAll erroneously reconfigured after disabling night serviceSymptom CFwdAll incorrectly appears after night service is disabled.
Conditions
Workaround
Error Message CSCsj38755 Ping Fails over ATM interface.Symptom Ping fails over the atm interface while applying Quality of Service.
Conditions
Workaround
CSCsl26765 DTMF not detected by CUE if I/C call is txfer to ph with CFDWALL to VMSymptom On CUBE DTMF is not detected to stop prompt playback or record message.
Conditions
Workaround
CSCsm23378 DTMF transcoding from rtp-nte to in-band fails for same codecSymptom DTMF transcoding should be done between call legs if DTMF relay is different, even if voice codecs are the same.
Conditions
Workaround
CSCsm34706 CUBE sends fixed DTMF duration and ignores received H.245 User InputSymptom CUBE sends a fixed 800 time units for every digit pressed (sent via RFC 2833) regardless of what it receives in the duration of a H.245 User Input field.
Conditions
Workaround
CSCsm37093 CME 4.1after security is enabled 7970 will register with US locale.Symptom After security is enabled locale in the phone 7970 cannot be changed.
Conditions
CSCsm64258 ephone-hunt group does NOT present calls to overlaid DNsSymptom When an ephone hunt-group is configured with 'present-call idle-phon', the ephone hunt-group skips the DNs which are configured as overlay.
Conditions
- ephone hunt-group is configured with 'present-call idle-phone'
- DN is configured as overlay
Workaround
CSCsm74560 phone does not look for network locale file for user defined languagesSymptom Wireless IP phone 7920 does not download the 7960-tones.xml files when user defined network locale is configure.
Conditions
Workaround
a.
–
–
–
–
b.
c.
d.
e.
In case if you have issue in 'create cnf-file', then ensure to repeat all the steps mentioned above again.
CSCsm88771 CME trunk optimized calls being put on hold automaticallySymptom Answering a trunk call transferred from another phone is automatically put on hold and cannot be resumed.
Conditions
Workaround
CSCsm89158 7921 does not display call park number while the call is parkedSymptom 7921 does not show the parked number when the call is parked.
Conditions
Workaround
CSCso25982 SIP transfer at connect with No AudioSymptom No audio when one SIP extension transfers a call from PSTN side to second SIP extension.
Conditions
Workaround
CSCso26056 SIP Extension unable to transfer at alert to a PSTN numberSymptom SIP(XOR) extension is also UNABLE to retrieve the call to PSTN-A(XEE) (hold state).
PSTN-A(XEE) remains in hold state.
Conditions
Workaround
CSCso27097 One way audio after xferring incoming SIP trunk call with transcoderSymptom One way audio after transfer.
Conditions
Workaround
CSCso36239 wrong primary-phone observed after re-configure primary-dn of the ephoneSymptom Wrong primary-phone observed after re-configure primary-dn of the ephone
Conditions
Workaround
CSCso39201 ephone gets into DND mode while in Connected stateSymptom 7961 and 7941 phones going into DND mode in Connected state.
Conditions
Workaround
CSCso42145 CCME ephone name config result in called number display issueSymptom IP phone is displaying the calling name in placed of called name for an incoming call from PSTN.
Conditions
Workaround
CSCso45361 High jitter in ringback from CUESymptom External caller gets transferred from CUE to an internal DN number, and the ringback sent to the caller is distorted because of jitter.
Conditions
Workaround
CSCso56824 SCCP OOB-RFC2833 DTMF interworking issue for CME customerSymptom RFC2833 DTMF packets are sent too fast to be processed by IVR systems.
Conditions
Workaround
CSCso64585 redundant CallRemoteMultiLine sccp msg to monitor park DNSymptom Jitter or voice quality issue may occur.
Conditions
Workaround
CSCso67655 S2 CFD: Secure DSPFarm doesn't register after a reload of the routerSymptom After Reload, Secure Conference profile does not register with Cisco Call Manager.
Conditions
Workaround
CSCso74656 MG2:device-based BLF shown incorrect status for EMCSCso78702 7961 IP Phone acct softkey get "no park number available"Symptom 2851 Version 12.4(15)T4 press the ACCT SoftKey and get "NO PARK NUMBER AVAILABLE".
CSCso95643 sRTP Package missing in c1861Symptom MGCP srtp-package option is not available in c1861 platform.
Conditions
Workaround
Open Caveats - Cisco IOS Release 12.4(11)XW7
There are no open caveats in this release.
Resolved Caveats - Cisco IOS Release 12.4(11)XW7
•
Cisco IOS software contains two vulnerabilities within the Cisco IOS WebVPN or Cisco IOS SSLVPN feature (SSLVPN) that can be remotely exploited without authentication to cause a denial of service condition. Both vulnerabilities affect both Cisco IOS WebVPN and Cisco IOS SSLVPN features:
1.
2.
Cisco has released free software updates that address these vulnerabilities. There are no workarounds that mitigate these vulnerabilities. This advisory is posted at the following link: http://www.cisco.com/warp/public/707/cisco-sa-20090325-webvpn.shtml
•
Multiple vulnerabilities exist in the Session Initiation Protocol (SIP) implementation in Cisco IOS that can be exploited remotely to trigger a memory leak or to cause a reload of the Cisco IOS device.
Cisco has released free software updates that address these vulnerabilities. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities addressed in this advisory.
There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself, if administrators do not require the Cisco IOS device to provide voice over IP services.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-sip.shtml.
•
The Secure Shell server (SSH) implementation in Cisco IOS contains multiple vulnerabilities that allow unauthenticated users the ability to generate a spurious memory access error or, in certain cases, reload the device.
The IOS SSH server is an optional service that is disabled by default, but its use is highly recommended as a security best practice for management of Cisco IOS devices. SSH can be configured as part of the AutoSecure feature in the initial configuration of IOS devices, AutoSecure run after initial configuration, or manually. Devices that are not configured to accept SSH connections are not affected by these vulnerabilities.
Common Vulnerabilities and Exposures (CVE) identifier CVE-2008-1159 has been assigned to this bug.
The Security Advisory for this issue is posted at
http://www.cisco.com/warp/public/707/cisco-sa-20080521-ssh.shtml.
CSCsi55685- kron removes recurring tclsh cli after first runSymptom The following recurring kron schedule fails and gets removed after the first run. kron occurrence tcl in 1 recurring policy-list tcl ! kron policy-list tcl cli tclsh disk0:hello.tcl!
Conditions
Workaround
CSCsk25697- unprotected buginf may cause cpuhog under repeated udp traffic to 53Symptom A router with DNS server configured may show CPUHOG tracebacks when it receives repeated crafted udp packets to its port 53. Sample for 3800 router: %SYS-3-CPUHOG: Task is running for (40004)msecs, more than (2000)msecs (5/0),process = DNS Server Input. -Traceback=0x60D68CDC 0x6033D984 0x6180E58C FFFFFFA0 3F 4E 60 0x708DFD18 06 FFFFFFFE FFFFFF88 FFFFFFA5 FFFFFFA3 FFFFFF92 FFFFFFA7 FFFFFF8B 7A 3A FFFFFFF5 17 FFFFFF9B FFFFFFC9 FFFFFF9B FFFFFFA2
Conditions
Workaround
CSCsl48237- incorrect bounding length in sstrncpy() calls in l2tp filesSymptom If a large name string is used when configuring the command "security crypto-profile" under the l2tp-class submode, we could have a buffer overflow which may crash the router.
Conditions
Workaround
CSCsl59294- %DATACORRUPTION-1-DATAINCONSISTENCY at caplog_logger_procSymptom A Cisco router may see the following error once shortly after bootup: *Nov 21 15:16:28 CDT: %DATACORRUPTION-1-DATAINCONSISTENCY: copy error, -PC= 0x416DE178 -Traceback= 0x412593C0 0x41276250 0x412947F4 0x416DE178 0x416DE650 0x423E303C 0x423E3020 *Nov 21 15:16:28 CDT: %DATACORRUPTION-1-DATAINCONSISTENCY: copy error, -PC= 0x416DE188 -Traceback= 0x412593C0 0x41276250 0x412947F4 0x416DE188 0x416DE650 0x423E303C 0x423E3020 No functional impact is seen.
Conditions
Workaround
CSCek41543- Cisco2811 Processor Pool Memory Leak in ISDN and CrashSymptom A Cisco 2811 router running Cisco IOS Release 12.4(7a) may have a memory leak in the ISDN process as has been seen in the show process memory. The leak rate appears to be about 1.20MB/Hour.
Conditions
Workaround
CSCsi21389- One-way multicast traffic over wireless.Symptom Routers that have the ability to use the optional 802.11b/g card, such as the Cisco ISR series do not pass multicast traffic across the wireless interface.
Conditions
Workaround
CSCsi44510- CME multicast audio to the 7921 cuts out on HWIC-APSymptom Multicast audio to the 7921 cuts out after a few seconds and will not resume.
Conditions
Workaround
CSCsj14277- Wrong Calling ID by transfer, only with 7931 - 12.4(4)XC6Symptom The caller id on the transfer-to is not updated with the transferee after the transferrer commits the transfer.
Conditions
Workaround
CSCsj34770- Having problem in establishing QSIG Prime callSymptom QSIG PRIME call is not going between slave and master routers
Conditions
Workaround
CSCsj50982- Wrong isdn cause code while making call to wrong destinationSymptom Wrong isdn cause code coming while making call to wrong destination
Conditions
Workaround
CSCsk25697- unprotected buginf may cause cpuhog under repeated udp traffic to 53Symptom A router with DNS server configured may show CPUHOG tracebacks when it receives repeated crafted udp packets to its port 53. Sample for 3800 router: %SYS-3-CPUHOG: Task is running for (40004)msecs, more than (2000)msecs (5/0),process = DNS Server Input. -Traceback= 0x60D68CDC 0x6033D984 0x6180E58C FFFFFFA0 3F 4E 60 0x708DFD18 06 FFFFFFFE FFFFFF88 FFFFFFA5 FFFFFFA3 FFFFFF92 FFFFFFA7 FFFFFF8B 7A 3A FFFFFFF5 17 FFFFFF9B FFFFFFC9 FFFFFF9B FFFFFFA2.
Conditions
Workaround
CSCsk71610- CCSIP_UDP_SOCKET causes high CPU UsageSymptom Incoming and outgoing calls fail due to high CPU Usage.
Conditions
Workaround
CSCsl18024- HWIC Country Code IssueSymptom Error message %DOT11-3-POWERS_INVALID: Interface Dot11Radio0/3/0, no valid power levels available is displayed during boot up.
Conditions
Workaround
CSCsl59294- %DATACORRUPTION-1-DATAINCONSISTENCY at caplog_logger_procSymptom A Cisco router may see the following error once shortly after bootup: *Nov 21 15:16:28 CDT: %DATACORRUPTION-1-DATAINCONSISTENCY: copy error, -PC= 0x416DE178 -Traceback= 0x412593C0 0x41276250 0x412947F4 0x416DE178 0x416DE650 0x423E303C 0x423E3020 *Nov 21 15:16:28 CDT: %DATACORRUPTION-1-DATAINCONSISTENCY: copy error, -PC= 0x416DE188 -Traceback= 0x412593C0 0x41276250 0x412947F4 0x416DE188 0x416DE650 0x423E303C 0x423E3020 No functional impact is seen.
Conditions
Workaround
CSCsm04209- PVDM2-DM fails to initiate calls over EuroISDN BRI while TEI is inactive.Symptom Modem calls fail to establish when 'isdn tei-negotiation firstcall' configured on ISDN interfaces.
Conditions
Workaround
CSCsm45689- UC520 crashed when system test was executed with debug logs enabled.Symptom UC520 crashed when system test was executed with debug logs enabled.
Conditions
Workaround
CSCsm46227- Router crash with CPUHOG for trunk port monitoring.
Symptom Cisco 3845 may crash when there is an incoming trunk call.
Conditions
Workaround
CSCsm49011- VG224 SCCP port plays reorder before CM routes call-IOS interdigit timer.Symptom On an FXS port configured for SCCP usage (such as on a VG224), reorder is heard 10 seconds after the last digit dialed when a number is dialed that requires waiting for interdigit timeout on CallManager.
Conditions
Workaround
CSCsm55045- Crash illegal deallocation of unassigned/in-use memory.Symptom A Cisco router configured with Call Manager Express (CME) may reload due to point to illegal deallocation of unassigned/in-use memory.
Conditions
Workaround
CSCsm50874- CME: calling name in facility IE doesn't display on IP phone.Symptom CME 4.2 does not display calling name when sent in an ISDN facility IE message. The facility is received and interpreted correctly however it doesn't show up on the IP phone display.
Workaround
CSCsm65685- Need to enable vendorConfig parameters on 7912.Symptom After the configuration of telephony-service service phone settings Access 2 <settingsAccess>2</settingsAccess>" is missing in system:/its/XMLDefault7921.cnf.xml.
Workaround
CSCsm92260- CSKU wrong country code issue.Symptom Error message Feb 28 08:50:28.459: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0/0/0, no valid power levels available seen on router console during router boot up.
Conditions
Workaround
CSCso33776- spurious access error in AFW_M_Destination_Initiate.Symptom Spurious memory access messages may be generated by a router. Mar 28 02:45:02.016: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x41DCE7E0 reading 0x60 Mar 28 02:45:02.016: %ALIGN-3-TRACE: -Traceback= 0x41DCE7E0 0x41DCF674 0x41DD351C 0x41DD6BBC 0x41DA96CC 0x41E0E428 0x41E0F2C4 0x41DF36D4. This issue may be cosmetic in nature.
Conditions
Workaround
Open Caveats - Cisco IOS Release 12.4(11)XW6
There are no open caveats in this release.
Resolved Caveats - Cisco IOS Release 12.4(11)XW6
CSCsg91306Multiple vulnerabilities exist in the Session Initiation Protocol (SIP) implementation in Cisco IOS that can be exploited remotely to trigger a memory leak or to cause a reload of the Cisco IOS device.
Cisco has released free software updates that address these vulnerabilities. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities addressed in this advisory.
There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself, if administrators do not require the Cisco IOS device to provide voice over IP services.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-sip.shtml.
CSCsi17020A series of segmented Skinny Call Control Protocol (SCCP) messages may cause a Cisco IOS device that is configured with the Network Address Translation (NAT) SCCP Fragmentation Support feature to reload.
Cisco has released free software updates that address this vulnerability. A workaround that mitigates this vulnerability is available.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-sccp.shtml.
CSCsj85065A Cisco IOS device may crash while processing an SSL packet. This can happen during the termination of an SSL-based session. The offending packet is not malformed and is normally received as part of the packet exchange.
Cisco has released free software updates that address this vulnerability.
Aside from disabling affected services, there are no available workarounds to mitigate an exploit of this vulnerability.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-ssl.shtml.
CSCsk42759Multiple vulnerabilities exist in the Session Initiation Protocol (SIP) implementation in Cisco IOS that can be exploited remotely to trigger a memory leak or to cause a reload of the Cisco IOS device.
Cisco has released free software updates that address these vulnerabilities. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities addressed in this advisory.
There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself, if administrators do not require the Cisco IOS device to provide voice over IP services.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-sip.shtml.
CSCso81854Multiple Cisco products are vulnerable to DNS cache poisoning attacks due to their use of insufficiently randomized DNS transaction IDs and UDP source ports in the DNS queries that they produce, which may allow an attacker to more easily forge DNS answers that can poison DNS caches.
To exploit this vulnerability an attacker must be able to cause a vulnerable DNS server to perform recursive DNS queries. Therefore, DNS servers that are only authoritative, or servers where recursion is not allowed, are not affected.
Cisco has released free software updates that address these vulnerabilities.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080708-dns.shtml.
This security advisory is being published simultaneously with announcements from other affected organizations.
Open Caveats - Cisco IOS Release 12.4(11)XW5
There are no open caveats in this release.
Resolved Caveats - Cisco IOS Release 12.4(11)XW5
CSCsk45804 CME speeddials fails after attempting to invalid numberSymptom Pressing a speeddial button on CME does nothing.
Conditions
Workaround
CSCsk65748 If POE 48V fails to come up, we need to retry 3 timesCSCsk60054 Configuration buffer full. Cannot display show runSymptom When certain configuration changes, the running configuration might not be able to be displayed and the following error message might appear:
% Configuration buffer full, can't add command: !%Aborting Save. Compress the config, Save it to flash or Free up space on deviceConditions
Workaround
CSCsk31644 Spurious Access at cmm_crs_proc_tr_call_consult_respSymptom Spurious memory access is seen while executing call forward scenarios.
Conditions
Workaround
CSCsk55078 CME 4.2 Diversion Header issue in chained supplementary serviceCSCsk22265 CME: 7935 and 7936 Corporate Directory Lookup fails in CME 4.1 and 4.2Symptom When attempting to use the Corporate Directory Lookup feature on a Cisco 7935 or 7936 Conference IP Phone, an attempt to search for matching records using a First Name or Last Name query results in the message "Server not found" being returned.
Conditions
Workaround
CSCsk50911 Need to update the max-ephones range for various platformsCSCsk25651 ephone-dn removal does not clean up mwi stateSymptom With Cisco Unity Express (CUE) integrated to Cisco Unified Communication Manager (CUCM) / CallManager utilizing SRST functionality, when the IP phones are registered to the SRST router, the MWI states may be incorrect.
Conditions
Workaround
CSCsj53899 Remove xlate profile from voice register dn removes from dial-peerSymptom Removing voice xlate profile from a voice register dn results in the same xlate profile being removed from a dial-peer.
Conditions
Workaround
CSCsj93762 Resume fails after HOLD for SIP phones regist with voice-class codecCSCsj81363 FRU incorrect and Carrier Set empty on wireless B sku platformsSymptom Under the show controller output for the Dot11 interface, the carrier set field is empty. This should say Americas. This does not affect functionality, all of the correct channels are present. Under the show diag output, the FRU says CISCO1811W-AG-A/K9 instead of CISCO1811W-AG-B/K9. This is just the labeling and does not affect functionality.
Conditions
Workaround
CSCsk42889 SIP call xfer to voicemail fails with DNS Query failed errorSymptom SIP trunk----CME/CUE AA---xfer extension---CFNA---CUE voicemail. Call transfers from AA to extension, CFNA back to CUE voicemail drop.
Conditions
Workaround
CSCsk58359 Update max sip phone range for various platformCSCse14595 call may be connected while being cfna to an PSTN callSymptom CME allows call connect after CFNA timer expire. On the 3745 with IOS 12.4(5)a customer can pick up the phone and get connected to the calling party after the CFNA timer expire.
Conditions
Workaround
CSCsk35315 CME: calledName= displayed garbled charactersSymptom Display on Cisco IP Phone contains corrupted characters when placing outbound PSTN call on an ISDN circuit.
Conditions
This can occur if there is an ISDN Facility message received after the call connects that does not contain display name information; for example an inbound facility message for Advice of Charge (AOC) may trigger this problem.
These messages can be seen on the gateway through the use of debug isdn q931. Caution should be taken when enabling any debugs on a production router/gateway as it can impact performance. Make sure as a minimum to disable console logging on the IOS device before enabling any debug. This issue does not have an impact to the operation or performance of the gateway nor phone.
Workaround
CSCsk16153 Modem won't be disconnected on exitSymptom Modem connection is still active on exit.
Conditions
Workaround
CSCsk73035 dtmf stop working if using connection plar opx immediate on fxo portSymptom dtmf stop working if using connection plar opx immediate on fxo port.
Conditions
pstn--fxo---gw--sip--cue AAIf removing "immediate" from the following config,the dtmf works.voice-port 0/1/0connection plar opx immediate 111caller-id enableWorkaround
CSCsk46424 Authentication fails on main dot11 interface when xconnect configuredCSCsk52683 System crashed when wireless client is trying to associate with APSymptom System crashes when there are clients trying to associate with AP.
Conditions
Workaround
CSCsk17498 Per Port Storm-Control is brokenCSCsj88854 Router crashes when a call is made from Remote Phone registered to CUCMESymptom A call made over a SIP trunk from a remote phone registered to Cisco Unified Call Manager Express 4.1 to a phone registered to a SIP proxy server results in router crash due to memory overrun.
Conditions
Workaround
CSCsj02456 HTTP PUT operation using copy command failedSymptom HTTP PUT operation using copy command failed.
Conditions
Workaround
CSCsk83795 call may be disconnected when resetting other ephoneSymptom Call is disconnected when another ephone is reset or unregisters.
Conditions
Workaround
CSCsj14565 ACL = deny; sa request ignored when crypto local-address is dynamicSymptom After a reboot of the router, or sometimes during normal operation, an IPsec tunnel fails to initiate. When debug crypto ipsec is enabled, the following error can be seen in the debug output: IPSEC(sa_initiate): ACL = deny; sa request ignored.
Conditions
For example:crypto map mycryptomap local-address Dialer0interface Dialer0ip address negotiatedWorkaround
CSCsk74181 SIP DO-DO - Basic Fax call failsSymptom Fax call fails for a SIP DO-DO call.
Conditions
Workaround
CSCsl04993 uc520 devices does not get reload via SNMPSymptom Cisco Unified Communications Series Integrated Services routers are not reloaded through SNMP.
Conditions
Workaround
CSCsj56438 Crafted EAP Response Identity packet may cause device to reloadSymptom This Cisco Bug ID identifies vulnerability in Cisco's implementation of Extensible Authentication Protocol (EAP) that exists when processing a crafted EAP Response Identity packet. This vulnerability affects several Cisco products that have support for wired or wireless EAP implementations.
This vulnerability is documented in the following Cisco bug IDs:
* Wireless EAP - CSCsj56438* Wired EAP - CSCsb45696 and CSCsc55249This Cisco Security Response is available at the following link: http://www.cisco.com/warp/public/707/cisco-sr-20071019-eap.shtml.
CSCsk66907 %SYS-3-CPUHOG: due to Skinny MOH Server processSymptom PU Hog due to Skinny MOH Server causing phones to unregister:
%SYS-3-CPUHOG: Task is running for (xxx)msecs, more than (xxx)msecs(xxxxxx),process = Skinny MOH Server.xConditions
Workaround
CSCsi60392 CME does not send SIP NOTIFY DTMF to CUE-AA after txfer from CUE-VMSymptom No response to DTMF inputs during Auto Attendant session.
Conditions
Workaround
CSCsl12443 CME: TNP phones may experience one way audioSymptom IP phone with FXO trunk config may experience intermittent one way audio. Debug ephone detail will show the following error:
OpenReceiveChannelAck status orcError on socketWorkaround
CSCsj38652 Freddo DTMF/cptone issues for Taiwan, Hong Kong, Singapore ComplianceSymptom DTMF levels are 0.3-0.5 dB below minimum limits for DTMF high/low tone signal power for Taiwan, Hong Kong and Singapore.
Conditions
Workaround
CSCsk83813 sip call will pick up the wrong codec type from voice class codecSymptom When a SIP call is established, the Cisco IOS correctly uses the "codec preference 2" setting (G.711ulaw) that is configured in the voice class codec configuration. When this problem occurs, the tone remote control functionality does not work and voice becomes distorted due to the codec mismatch.
Conditions
voice class codec 1codec preference 1 g729r8codec preference 2 g711ulawdial-peer voice 9191916 potsdescription #1/1:16#0# INUSE 163destination-pattern 19900001429191916port 1/1:16dial-peer voice 555 voiprtp payload-type lmr-tone 107rtp payload-type nte-tone 108voice-class codec 1session protocol sipv2incoming called-number.dtmf-relay rtp-nteno vadUsing 2811Cisco IOS versions: 12.4(17.4)PI1b and 12.4(17.4)PI1aWorkaround
CSCsk63037 CME 4.2 has broken caller ID featureSymptom Calling name is corrupted for ISDN calls on CME.
Conditions
Workaround
CSCsk95708 10 to 30 sec delay in starting media in secure meet-me conferenceSymptom SCCP messages are delayed by a few seconds for secure calls, this could effect secure dspfarm secure analog endpoints.
Conditions
Workaround
CSCsk42180 Few Objects of CISCO-LICENSE-MGMT-MIB giving wrong values during SNMP waCSCsj94818 C877: ADSL2+ AnnexM: PVC goes to INAC after QoS is appliedSymptom On C877 device for VC which is configured with vbr-nrt and PCR rate higher that VC bandwidth, when changes are introduced (e.g. QoS applied), VC goes in INAC status due to the fact that PCR is higher than physical bandwidth.
Conditions
Workaround
CSCsk06443 SIP TGW sends 183 response even though no response from ISDNSymptom IOS Gateway is sending 183 Response upon receiving retransmission of Invite Request.
Conditions
Workaround
CSCsk36600 Router crashes when ExtACL has mixed of tcp host and tcp net with QoSSymptom Router might crash when Extended ACL is applied with mixed of tcp permit statements with host and networks and this acl is applied in the class-map.
Conditions
Workaround
CSCsj80906 Router crashes on changing ACL linked to service policySymptom A Cisco router may crash due to a bus error.
Conditions
Workaround
CSCsl17037 CME: Local Directory IssueSymptom Directory numbers that are configured in local directory of CME are not being shown in received calls directory. The number and name shows while call in ringing state but is not showing during connected state.
Conditions
Workaround
CSCsl04115 CM call to CME when Put on Hold, CME Hears FastBusy instead of TOHSymptom Cisco IP Phone placed on hold hears fast busy instead of tone-on-hold.
Conditions
IPPhoneA---CM---H323---CME---IpPhoneB- Phone A calls Phone B- Phone A puts Phone B on Hold.- Instead of playing Tone On Hold, Phone B user hears a fast busy tone.Workaround
CSCsk72582 Call in B-ACD drops if answered after hunting second time roundSymptom Calls in B-ACD on CME router drops if the first round hunting is done through the hunt group lines. If the call is not answered, the caller is placed in the queue and hears an announcement with "all agents busy please hold " and so on. When the script hunts again after a timeout and this time, the call is answered, it drops the call completely. All phones in the hunt group will see a display of 1 call in queue for a few seconds before clearing.
Conditions
Workaround
Open Caveats - Cisco IOS Release 12.4(11)XW3
There are no open caveats in this release.
Resolved Caveats - Cisco IOS Release 12.4(11)XW3
CSCsj97535 BACD functionality broken on freddoCSCsi50316 fix linux builds for rdo toolsCSCsh74385 EEM fails to register with the redundancy framework (RF)Symptom It is not possible to configure event manager (EEM) applets for redundancyframework (RF) events:
nms-7206vxr(config)#event manager applet testappnms-7206vxr(config-applet)#event ?application Application specific eventcli CLI eventcounter Counter eventinterface Interface eventioswdsysmon IOS WDSysMon eventnone Manually run policy eventoir OIR eventresource Resource eventsnmp SNMP eventsyslog Syslog eventtimer Timer eventtrack Tracking object eventnms-7206vxr(config-applet)#The keyword for RF is missing as EEM has not registered with RF.
Workaround
CSCsj25470 EEM hostnames over 20 characters causes CLI actions to hangSymptom The Cisco Embedded Event Manager may hang and tie up virtual terminal (vty) lines if the devices host name is longer than 20 characters.
Conditions
Workaround
Open Caveats - Cisco IOS Release 12.4(11)XW2
There are no open careats in this release.
Resolved Caveats - Cisco IOS Release 12.4(11)XW2
CSCsg70474Multiple voice-related vulnerabilities are identified in Cisco IOS software, one of which is also shared with Cisco Unified Communications Manager. These vulnerabilities pertain to the following protocols or features:
–
–
–
–
–
Cisco has made free software available to address these vulnerabilities for affected customers. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities mentioned in this advisory.
There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20070808-IOS-voice.shtml
CSCsi60004Multiple voice-related vulnerabilities are identified in Cisco IOS software, one of which is also shared with Cisco Unified Communications Manager. These vulnerabilities pertain to the following protocols or features:
–
–
–
–
–
Cisco has made free software available to address these vulnerabilities for affected customers. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities mentioned in this advisory.
There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20070808-IOS-voice.shtml
CSCek78645 Analog phones cannot register with CMESymptom Analog phones when configured as SCCP phones cannot register with CCME.
Conditions
Workaround
CSCsj29857 xfer to ICD failed after conference AASymptom Occurs when an incoming PSTN call to ICD is routed to an agent and the agent conferences AA. If the agent stays in the conference and tries to transfer the AA to ICD, the call sticks there.
Conditions
Workaround
Open Caveats - Cisco IOS Release 12.4(11)XW1
There are no new open caveats for this release.
Resolved Caveats -Cisco IOS Release 12.4(11)XW1
CSCsi13312 Authentication fails and unable to login to a factory fresh routerSymptom Authentication with Security Device Manager (SDM) 2.3.3 fails, preventing you from logging into the router through HTTPS, HTTP, SSH, Telnet, console, or any management application.
Conditions
Cisco 800 series
Cisco 1700 series
Cisco 1800 series
Cisco 2700 series
Cisco 2800 series
Cisco 3700 series
Cisco 3800 series
Workaround
http://www.cisco.com/en/US/ts/fn/620/fn62758.html
CSCsg62638 CPU usage reaches 99% after nmap scan on port 53Symptom Scan of a router when DNS server is enabled can cause high CPU usage of DNS process itself. Overall performance of the device can deteriorate to some extent.
Solution
Workaround
CSCsi56172 CME 4.1 IP phone dropped when trying to complete hardware conferenceSymptom IP phone trying to create an ad-hoc conference is dropped when pressing "Conf" softkey the second time.
Conditions
CSCsi58842 CME: 7960+7914 display select line when conference IP phoneSymptom
1.
2.
3.
4.
5.
6.
7.
Workaround
Open Caveats - Cisco IOS Release 12.4(11)XW
There are no new open caveats for this release.
Resolved Caveats -Cisco IOS Release 12.4(11)XW
CSCec12299Devices running Cisco IOS versions 12.0S, 12.2, 12.3 or 12.4 and configured for Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs) or VPN Routing and Forwarding Lite (VRF Lite) and using Border Gateway Protocol (BGP) between Customer Edge (CE) and Provider Edge (PE) devices may permit information to propagate between VPNs.
Workarounds are available to help mitigate this vulnerability.
This issue is triggered by a logic error when processing extended communities on the PE device.
This issue cannot be deterministically exploited by an attacker.
Cisco has released free software updates that address these vulnerabilities. Workarounds that mitigate these vulnerabilities are available.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-vpn.shtml.CSCsi01470A vulnerability in the Cisco implementation of Multicast Virtual Private Network (MVPN) is subject to exploitation that can allow a malicious user to create extra multicast states on the core routers or receive multicast traffic from other Multiprotocol Label Switching (MPLS) based Virtual Private Networks (VPN) by sending specially crafted messages.
Cisco has released free software updates that address this vulnerability. Workarounds that mitigate this vulnerability are available.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080326-mvpn.shtml
CSCek61570 Trunk dn stuck in seize/seize state and does not recoverSymptom The ephone DN may get stuck in SEIZED state and one-way audio would occur afterwards.
Conditions
Workaround
CSCek67866 xcodemsp.c Static Analysis Found IssueCSCek70830 $$TS: cme crashed during call to ICD routept running 124-11.3.4.PIA1CSCsg36112 In xcoding, SCCP sessions not cleared immediately after abrupt call endSymptom When the calls are terminated/disconnected ungracefully or abruptly on an IPIP GW while doing large number of transcoding sessions, some of the sccp and rtp connection of that calls are not cleared immediately on IPIP Gw.
Conditions
Workaround
CSCsg40567 Memory leak found with malformed tls/ssl packets in http core processSymptom Malformed SSL packets may cause a router to leak multiple memory blocks.
Conditions
Workaround
CSCsg69022 c1700 router crash @ nv_write_internalSymptom When a user configures the no telephony-service command, router crashes at running configuration generation.
Conditions
Workaround
CSCsh65321 Phones fail to do secure authentication in 12.4(12.12)PI6Symptom Non-7921 phones will not register securely to CME.
Conditions
Workaround
CSCsh73754 SmartPorts: PC connected to an IP phone cannot connect to WANCSCsh80217 No Audio Path after REFER from xto to xee in a Meetingplace scenarioSymptom No audio heard on Caller IP phone
Conditions
Workaround
CSCsh81876 Traceback & crash if guest mode and multiple vlansSymptom In case the platform supported number of BSSIDs is 8 then configuring any ssid which comes in the 9th to 16th order in "sh run" as "guest-mode" results in a software crash. In general, if the platform supported BSSIDs considered as X and the maximum supported SSIDs considered as Y then configuring any ssid which comes in the X+1 to Y order (in "sh run") as "guest-mode" results in crash. Problem is not seen on platforms on which supported number of BSSIDs is 16.
Workaround
CSCsh89887 One way voice path with h/w conference on ephone-dn w/o preference 0CSCsi03314 test ecdsa display-stats command not displaying outputCSCsi04538 Router crash with memory corruption when configure cert-upgrade auth modSymptom A CUCME (Cisco Unified Call Manager Express) router may crash with memory corruption when voice calls are made involving a transcoder.
Conditions
Workaround
CSCsi09530 CME SIP phone failed to register because of authenticate registerSymptom If "authenticate register" is configured under "voice register global", CME SIP failed to registered.
Conditions
Workaround
Further Problem Description In registrar Functionality, CME challenges an inbound Register request with 401 response. If "authenticate register" is configured under "voice register global". The Registering Endpoint then Sends a Register Request with Credentials. GW Stack is not processing this Request and is dropping it.
CSCsi15740 Memory leak in basic ICD callCSCsi22430 B-ACD Crashes CME 4.2Symptom CME could crash when running B-ACD script while call monitoring is enabled.
Conditions
Workaround
CSCsi27400 Memory leak in TGW for basic SRTP-TLS SIP callSymptom When a basic SIP call with SRTP using TLS is established between OGW and TGW, a memory leak is observed at the TGW.
Conditions
Workaround
CSCsi31667 SIP Registrations sent to Service Provider Proxy for Internal extensionsCSCsi34163 Restore: Radar Detection for non-European regions.CSCsi42596 router crash when using MeetMe conference with 13 participantsCSCsi44268 $$TS SIP trunk to AA to SIP phone disconnected
Problem Description Call from sip-trunk to CRS/AA sip-phone, call disconnected after 19 seconds.
Symptom The issues observed after V124_11_3_8_PI1A onwards. there was a major ida_t_pi1_atg sync to PI6 occurred in this label.
1.
2.
Root Cause: In Xfering_SetupDone() when case of CS_ACTIVE, remove calling AFW_Leg_Resume() again when handling special delayDisconnect call-info in REFER. This code is no longer needed since AFW now unhold the sip XEE before shelbourne hairpin.
Workaround
CSCsi44465 change CME version from 4.1 to 4.2Symptom Change CME product version from 4.1 to 4.2
Workaround
CSCsi44549 Router crashes during pings when QoS+NAT+FW+IPSEC+GRE are configuredCSCsi47359 Crash seen in AFW_Process at the customer siteCSCsi48062 H323--H323--SIP call fails with media transcoder high-densitySymptom On the IPIPGW, an H.323-to-H.323 call fails to complete call setup.
Conditions
Workaround
CSCsi51441 uclient cannot ping to gateway via non-native vlanPlease refer Release-note enclosure attached to the DDTS CSCsg58791.CSCsi52410 Add version 6.0 to the available CCM version on dspfarmCSCsi53006 Router crash in cmm_crs_proc_tr_call_trans_reqSymptom CME with UCCX integration could crash at the following function:
cmm_crs_proc_tr_call_trans_req()Conditions
Workaround
CSCsi69819 Line protocol down when no auto speed and duplex negotiate on onboard FE
Additional References
Use this release note with the documents and websites in this release note and the documents listed in the following sections:
•
Release-Specific Documents
The following documents are specific to Release 12.4 and apply to Release 12.4(11)XW.
•
•
•
Platform-Specific Documents
Hardware installation guides, configuration and command reference guides, and additional documents specific to the Cisco VG200 series routers are at
http://www.cisco.com/en/US/products/hw/gatecont/ps2250/tsd_products_support_series_home.html
Cisco IOS Software Documentation Set
The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents are available online.
Documentation Modules
Each module in the Cisco IOS documentation set consists of one or more configuration guides and one or more corresponding command references. Chapters in a configuration guide describe protocols, configuration tasks, and Cisco IOS software functionality, and contain comprehensive configuration examples. Chapters in a command reference provide complete command syntax information. Use each configuration guide with its corresponding command reference. Cisco IOS Software Documentation is available in html or pdf form.
Select your release and click the command references, configuration guides, or any other Cisco IOS documentation you need
Notices
See the "Notices" section in About Cisco IOS Release Notes located at
http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html
Use this document in conjunction with the documents listed in the "Additional References" section.
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2007-2009 Cisco Systems, Inc. All rights reserved.
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)