Cisco Mobile Wireless Home Agent Command Reference for IOS Release 12.4(22)YD2
Available Languages
Table Of Contents
Cisco Mobile Wireless Home Agent Command Reference for IOS Release 12.4(22)YD2
access-type 3gpp2 mhae optional
access-type 3gpp2 suppress aaa access-request
ip fragment first minimum size
ip mobile cdma ha-chap send attribute
ip mobile debug include username
ip mobile home-agent accounting
ip mobile home-agent author-fail send-response
ip mobile home-agent binding-overwrite
ip mobile home-agent congestion
ip mobile home-agent dynamic-address
ip mobile home-agent foreign-agent
ip mobile home-agent host-config url
ip mobile home-agent ipredirect nat-enable
ip mobile home-agent max-binding
ip mobile home-agent redundancy
ip mobile home-agent reject-static-addr
ip mobile home-agent resync-sa
ip mobile home-agent revocation
ip mobile home-agent revocation ignore
ip mobile home-agent switchover aaa swact-notification
ip mobile home-agent template tunnel
ip mobile tunnel ip-ip conserve-ip-id threshold
radius-server attribute 32 include-in-access-req
radius-server attribute 55 access-request include
radius-server vsa send accounting wimax
radius-server vsa send authentication wimax
show ip mobile binding vrf realm
show ip mobile home-agent congestion
snmp-server enable traps ipmobile
standby track decrement priority
track id application home-agent
Cisco Mobile Wireless Home Agent Command Reference for IOS Release 12.4(22)YD2
This section documents new or modified commands. All other commands used with this feature are documented in the Cisco IOS Release 12.5T command reference publications.
•
access-type 3gpp2 mhae optional
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
aaa accounting
To enable authentication, authorization, and accounting (AAA) accounting of requested services for billing or security purposes when you use RADIUS or TACACS+, use the aaa accounting command in global configuration mode. To disable AAA accounting, use the no form of this command.
aaa accounting {auth-proxy | system | network | exec | connection | commands level | delay-start | dot1x | gigawords | multicast | nested | send | session-duration | suppress | update} {default | list-name | guarantee-first} [vrf vrf-name] {start-stop | stop-only | none} [broadcast] group groupname
no aaa accounting {auth-proxy | system | network | exec | connection | commands level | delay-start | dot1x | gigawords | multicast | nested | send | session-duration | suppress | update} {default | list-name | guarantee-first} [vrf vrf-name] {start-stop | stop-only | none} [broadcast] group groupname
Syntax Description
auth-proxy
Provides information about all authenticated-proxy user events.
system
Performs accounting for all system-level events not associated with users, such as reloads.
network
Runs accounting for all network-related service requests, including SLIP1 , PPP2 , PPP NCPs3 , and ARAP4 .
exec
Runs accounting for EXEC shell session. This keyword might return user profile information such as what is generated by the autocommand command.
connection
Provides information about all outbound connections made from the network access server, such as Telnet, LAT5 , TN3270, PAD6 , and rlogin.
commands level
Runs accounting for all commands at the specified privilege level. Valid privilege level entries are integers from 0 through 15.
default
Uses the listed accounting methods that follow this argument as the default list of methods for accounting services.
delay-start
Delay PPP Network start record until peer IP address is known.
dot1x
For dot1x sessions.
gigawords
64 bit interface counters to support Radius attributes 52 and 53.
list-name
Character string used to name the list of at least one of the accounting methods described in Table 3.
multicast
For multicast accounting.
nested
When starting PPP from EXEC mode, this generates network records before EXEC-STOP record.
none
Disables accounting services on this line or interface.
send
Send records to accounting server.
session-duration
Set the preference for calculating session durations.
start-stop
Sends a "start" accounting notice at the beginning of a process and a "stop" accounting notice at the end of a process. The "start" accounting record is sent in the background. The requested user process begins regardless of whether the "start" accounting notice was received by the accounting server.
stop-only
Sends a "stop" accounting notice at the end of the requested user process.
suppress
Does not generate accounting records for a specific type of user.
update
Enables accounting update record.
broadcast
(Optional) Enables sending accounting records to multiple AAA servers. Simultaneously sends accounting records to the first server in each group. If the first server is unavailable, fail over occurs using the backup servers defined within that group.
group groupname
At least one of the keywords described in Table 2.
1 SLIP = Serial Line Internet Protocol
2 PPP = Point-to-Point Protocol
3 PPP NCPs = Point-to-Point Protocol Network Control Protocols
4 ARAP = AppleTalk Remote Access Protocol
5 LAT = local-area transport
6 PAD = packet assembler/disassembler
Defaults
AAA accounting is disabled.
Command Modes
Global configuration
Command History
Usage Guidelines
Use the aaa accounting command to enable accounting and to create named method lists defining specific accounting methods on a per-line or per-interface basis.
Table 2 contains descriptions of accounting method keywords.
In Table 1, the group radius and group tacacs+ methods refer to a set of previously defined RADIUS or TACACS+ servers. Use the radius-server host and tacacs-server host commands to configure the host servers. Use the aaa group server radius and aaa group server tacacs+ commands to create a named group of servers.
Cisco IOS software supports the following two methods of accounting:
•
•
Method lists for accounting define the way accounting will be performed. Named accounting method lists enable you to designate a particular security protocol to be used on specific lines or interfaces for particular types of accounting services. Create a list by entering the list-name and the method, where list-name is any character string used to name this list (excluding the names of methods, such as radius or tacacs+) and method identifies the methods to be tried in sequence as given.
If the aaa accounting command for a particular accounting type is issued without a named method list specified, the default method list is automatically applied to all interfaces or lines (where this accounting type applies) except those that have a named method list explicitly defined. (A defined method list overrides the default method list.) If no default method list is defined, then no accounting takes place.
Named accounting method lists are specific to the indicated type of accounting. Method list keywords are described in Table 3.
Note
For minimal accounting, include the stop-only keyword to send a "stop" record accounting notice at the end of the requested user process. For more accounting, you can include the start-stop keyword, so that RADIUS or TACACS+ sends a "start" accounting notice at the beginning of the requested process and a "stop" accounting notice at the end of the process. Accounting is stored only on the RADIUS or TACACS+ server. The none keyword disables accounting services for the specified line or interface.
When AAA accounting is activated, the network access server monitors either RADIUS accounting attributes or TACACS+ AV pairs pertinent to the connection, depending on the security method you have implemented. The network access server reports these attributes as accounting records, which are then stored in an accounting log on the security server. For a list of supported RADIUS accounting attributes, refer to the appendix "RADIUS Attributes" in the Cisco IOS Security Configuration Guide. For a list of supported TACACS+ accounting AV pairs, refer to the appendix "TACACS+ Attribute-Value Pairs" in the Cisco IOS Security Configuration Guide.
Note
Examples
The following example defines a default commands accounting method list, where accounting services are provided by a TACACS+ security server, set for privilege level 15 commands with a stop-only restriction.
aaa accounting commands 15 default stop-only group tacacs+The following example defines a default auth-proxy accounting method list, where accounting services are provided by a TACACS+ security server with a stop-only restriction. The aaa accounting command activates authentication proxy accounting.
aaa new-modelaaa authentication login default group tacacs+aaa authorization auth-proxy default group tacacs+aaa accounting auth-proxy default start-stop group tacacs+Related Commands
aaa accounting update
To enable periodic interim accounting records to be sent to the accounting server, use the aaa accounting update command in global configuration mode. To disable interim accounting updates, use the no form of this command.
aaa accounting update [newinfo] [periodic number]
no aaa accounting update
Syntax Description
Defaults
Disabled
Command Modes
Global configuration
Command History
Usage Guidelines
When aaa accounting update is activated, the Cisco IOS software issues interim accounting records for all users on the system. If the keyword newinfo is used, interim accounting records will be sent to the accounting server every time there is new accounting information to report. An example of this would be when IP Control Protocol (IPCP) completes IP address negotiation with the remote peer. The interim accounting record will include the negotiated IP address used by the remote peer.
When used with the keyword periodic, interim accounting records are sent periodically as defined by the argument number. The interim accounting record contains all of the accounting information recorded for that user up to the time the accounting record is sent.
When using both the newinfo and periodic keywords, interim accounting records are sent to the accounting server every time there is new accounting information to report, and accounting records are sent to the accounting server periodically as defined by the argument number. For example, if you configure aaa accounting update newinfo periodic number, all users currently logged in will continue to generate periodic interim accounting records while new users will generate accounting records based on the newinfo algorithm.
Caution
Examples
The following example sends PPP accounting records to a remote RADIUS server. When IPCP completes negotiation, this command sends an interim accounting record to the RADIUS server that includes the negotiated IP address for this user; it also sends periodic interim accounting records to the RADIUS server at 30 minute intervals.
aaa accounting network default start-stop group radiusaaa accounting update newinfo periodic 30Related Commands
aaa accounting
Enables AAA accounting of requested services for billing or security purposes.
aaa authorization ipmobile
To configure multiple AAA groups, or to authorize Mobile IP to retrieve security associations from the AAA server using TACACS+ or RADIUS, use the aaa authorization ipmobile global configuration command. Use the no form of this command to remove authorization.
aaa authorization ipmobile {tacacs+ | radius}
no aaa authorization ipmobile {tacacs+ | radius}
Syntax Description
Defaults
AAA is not used to retrieve security associations for authentication.
Command Modes
Global configuration
Command History
Usage Guidelines
Mobile IP requires security associations for registration authentication. The security associations are configured on the router or on an AAA server. This command is not need for the former; but in the latter case, this command authorizes Mobile IP to retrieve the security associations from the AAA server.
Note
Use this command to configure multiple AAA groups, which is the key to sending different realms to different AAA server-groups.
Examples
The following example uses TACACS+ to retrieve security associations from the AAA server:
aaa new-modelaaa authorization ipmobile tacacs+tacacs-server host 1.2.3.4tacacs-server key mykeyip mobile host 10.0.0.1 10.0.0.5 virtual-network 10.0.0.0 255.0.0.0 aaaRelated Commands
access list
To configure the access list mechanism for filtering frames by protocol type or vendor code, use the access-list global configuration command. Use the no form of this command to remove the single specified entry from the access list.
access-list access-list-number {permit | deny | remark} {type-code wild-mask | address mask} [compiled reuse | dynamic-extended | rate-limit {ACL index}]
no access-list access-list-number
Syntax Description
Defaults
No numbered encryption access lists are defined, and therefore no traffic will be encrypted/decrypted. After being defined, all encryption access lists contain an implicit "deny" ("do not encrypt/decrypt") statement at the end of the list.
Command Modes
Global configuration
Command History
Usage Guidelines
Use encryption access lists to control which packets on an interface are encrypted/decrypted, and which are transmitted as plain text (unencrypted).
When a packet is examined for an encryption access list match, encryption access list statements are checked in the order that the statements were created. After a packet matches the conditions in a statement, no more statements will be checked. This means that you need to carefully consider the order in which you enter the statements.
To use the encryption access list, you must first specify the access list in a crypto map and then apply the crypto map to an interface, using the crypto map (CET global configuration) and crypto map (CET interface configuration) commands.
Fragmented IP packets, other than the initial fragment, are immediately accepted by any extended IP access list. Extended access lists used to control virtual terminal line access or restrict contents of routing updates must not match the TCP source port, the type of service value, or the packet's precedence.
Note
Caution
Note
Examples
The following example creates a numbered encryption access list that specifies a class C subnet for the source and a class C subnet for the destination of IP packets. When the router uses this encryption access list, all TCP traffic that is exchanged between the source and destination subnets will be encrypted.
access-list 101 permit tcp 172.21.3.0 0.0.0.255 172.22.2.0 0.0.0.255Here are the new command options for Cisco IOS Release 12.4(22)YD:
Router(config)#access-list ?<1-99> IP standard access list<100-199> IP extended access list<1100-1199> Extended 48-bit MAC address access list<1300-1999> IP standard access list (expanded range)<200-299> Protocol type-code access list<2000-2699> IP extended access list (expanded range)<700-799> 48-bit MAC address access listcompiled Enable IP access-list compilationdynamic-extended Extend the dynamic ACL absolute timerrate-limit Simple rate-limit specific access listRouter(config)#access-list 1 ?deny Specify packets to rejectpermit Specify packets to forwardremark Access list entry commentRouter(config)#access-list 1 deny ?Hostname or A.B.C.D Address to matchany Any source hosthost A single host addressRouter(config)#access-list 1 permit ?Hostname or A.B.C.D Address to matchany Any source hosthost A single host addressRouter(config)#access-list 1 remark ?LINE Comment up to 100 characters<cr>Router(config)#access-list 100 ?deny Specify packets to rejectdynamic Specify a DYNAMIC list of PERMITs or DENYspermit Specify packets to forwardremark Access list entry commentRouter(config)#access-list 1100 ?deny Specify packets to rejectpermit Specify packets to forwardRouter(config)#access-list compiled ?reuse Reuse tables when compiling (for reduced memory requirements)<cr>Router(config)#access-list dynamic-extended ?<cr>Router(config)#access-list rate-limit ?<0-99> Precedence ACL index<100-199> MAC address ACL indexRouter(config)#access-list rate-limit 0 ?<0-7> Precedencemask Use precedence bitmaskaccess-type 3gpp2 mhae optional
To make the Mobile Node-Home Agent authenticator extension (MHAE) optional for the 3GPP2 access-type, use the access-type 3gpp2 mhae optional command in IP Mobile Home Agent option configuration mode. To restore the default setting, use the no form of this command.
access-type 3gpp2 mhae optional
no access-type 3gpp2 mhae optional
Syntax Description
This command has no arguments or keywords.
Defaults
The MHAE is required for the 3GPP2 access-type.
Command Modes
IP Mobile Home Agent option configuration
Command History
Examples
The following example shows how to make the MHAE optional for the 3GPP2 access-type:
HA(config)# ip mobile home-agent optionsHA(config-ipmobile-ha-options)# access-type 3gpp2 mhae optionalRelated Commands
access-type 3gpp2 suppress aaa access-request
To prevent the Home Agent from sending access-requests to the authentication, authorization, and accounting (AAA) server for the 3GPP2 access-type, use the access-type 3gpp2 suppress aaa access-request command in IP Mobile Home Agent option configuration mode. To enable the Home Agent to send the access-requests, use the no form of this command.
access-type 3gpp2 suppress aaa access-request
no access-type 3gpp2 suppress aaa access-request
Syntax Description
This command has no arguments or keywords.
Command Default
The Home Agent can send access-requests to the AAA server for the 3GPP2 access-type.
Command Modes
IP Mobile Home Agent option configuration
Command History
Examples
The following example shows how to enable the Home Agent to send access-requests to the AAA server for the 3GPP2 access-type:
HA(config)# ip mobile home-agent optionsHA(config-ipmobile-ha-options)# access-type 3gpp2 suppress aaa access-requestRelated Commands
clear ip mobile binding
To remove mobility bindings, use the clear ip mobile binding EXEC command.
clear ip mobile binding {all | ip-address | nai string | realm word | vrf realm | mac address} [coa | session-id | synch]]
Syntax Description
Command Modes
EXEC
Command History
Usage Guidelines
The Home Agent creates a mobility binding for each roaming mobile node. The mobility binding allows the mobile node to exchange packets with the correspondent node. Associated with the mobility binding is the tunnel to the visited network and a host route to forward packets destined for the mobile node. There should be no need to clear the binding because it expires after lifetime is reached or when the mobile node deregisters.
When the mobility binding is removed, the number of users on the tunnel is decremented and the host route is removed from the routing table. The mobile node is not notified.
Note
Note
Examples
The following example administratively stops mobile node 10.0.0.1 from roaming:
Router# clear ip mobile binding 10.0.0.1Router# show ip mobile bindingMobility Binding List:Total 110.0.0.1:Care-of Addr 68.0.0.31, Src Addr 68.0.0.31,Lifetime granted 02:46:40 (10000), remaining 02:46:32Flags SbdmGvt, Identification B750FAC4.C28F56A8,Tunnel100 src 66.0.0.5 dest 68.0.0.31 reverse-allowedRouting Options - (G)GRERelated Commands
clear ip mobile host-counters
To clear the mobility counters specific to each mobile station, use the clear ip mobile host-counters EXEC command.
clear ip mobile host-counters [[ip-address | nai string ] undo]]
Syntax Description
ip-address
(Optional) IP address of a mobile node.
nai string
(Optional) Network access identifier of the mobile node.
undo
(Optional) Restores the previously cleared counters.
Command Modes
EXEC
Command History
12.0(1)T
This command was introduced.
12.2(2)XC
The nai keyword and associated variables were added.
12.4(15)XM
Added support to clear HA policing statistics.
Usage Guidelines
This command clears the counters that are displayed when you use the show ip mobile host command. The undo keyword restores the counters (this is useful for debugging).
Examples
The following example shows how the counters can be used for debugging and displays the total number of bindings:
Router# show ip mobile hostMobile Host List:Total 1cisco_user1@cisco.com:Dynamic address from local pool acct_pool1Static authorization using pool local acct_pool1Allowed lifetime 10:00:00 (36000/default)Roam status -Registered-, Home link on interface Null0Bindings1.1.1.56Accepted 0, Last time -never-Overall service time 01:14:58Denied 0, Last time -never-Last code '-never- (0)'Total violations 0Acct-Session-Id: 0x00000015Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRouter# clear ip mobile host-counters20.0.0.1:Allowed lifetime 10:00:00 (36000/default)Roaming status -Unregistered-, Home link on virtual network 20.0.0.0/8Accepted 0, Last time -never-Overall service time -never-Denied 0, Last time -never-Last code `-never- (0)'Total violations 0Tunnel to MN - pkts 0, bytes 0Reverse tunnel from MN - pkts 0, bytes 0Related Commands
clear ip mobile secure
To clear and retrieve remote security associations, use the clear ip mobile secure EXEC command.
clear ip mobile secure {host lower [upper] string | empty | all} [load] [home-agent ha-rk A.B.C.D]
Syntax Description
Command Modes
EXEC
Command History
12.0(1)T
This command was introduced.
12.2(2)XC
The nai keyword and associated variables were added.
Usage Guidelines
Security associations are required for registration authentication. They can be stored on an AAA server. During registration, they may be stored locally after retrieval from the AAA server. The security association on the router may become stale or out of date when the security association on the AAA server changes.
This command clears security associations that have been downloaded from the AAA server.
Note
Note
You can use the clear ip mobile secure all command clears all the keys MN, FA and HA-RK, generated and downloaded from AAA.
Note
Examples
In the following example, the AAA server has the security association for user 10.0.0.1 after registration:
Router# show ip mobile secure host 10.0.0.1Security Associations (algorithm,mode,replay protection,key):10.0.0.1:SPI 300, MD5, Prefix-suffix, Timestamp +/- 7,Key `oldkey' 1230552d39b7c1751f86bae5205ec0c8The security association of the AAA server changes as follows:
Router# clear ip mobile secure host 10.0.0.1 loadRouter# show ip mobile secure host 10.0.0.110.0.0.1:SPI 300, MD5, Prefix-suffix, Timestamp +/- 7,Key `newkey' 1230552d39b7c1751f86bae5205ec0c8Related Commands
ip mobile secure
Specifies the mobility security associations for mobile host, visitor, Home Agent, and Foreign Agent.
clear ip mobile traffic
To clear counters, use the clear ip mobile traffic Privileged EXEC command.
clear ip mobile traffic
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Mobile IP counters are accumulated during operation. They are useful for debugging and monitoring.
This command clears all Mobile IP counters. The undo keyword restores the counters (this is useful for debugging.) See the show ip mobile traffic command for a list and description of all counters.
Examples
The following example shows how the counters can be used for debugging:
Router# show ip mobile trafficIP Mobility traffic:Advertisements:Solicitations received 0Advertisements sent 0, response to solicitation 0Home Agent Registrations:Register 8, Deregister 0 requestsRegister 7, Deregister 0 repliedAccepted 6, No simultaneous bindings 0Denied 1, Ignored 1Unspecified 0, Unknown HA 0Administrative prohibited 0, No resource 0Authentication failed MN 0, FA 0Bad identification 1, Bad request form 0..Router# clear ip mobile trafficRouter# show ip mobile trafficIP Mobility traffic:Advertisements:Solicitations received 0Advertisements sent 0, response to solicitation 0Home Agent Registrations:Register 0, Deregister 0 requestsRegister 0, Deregister 0 repliedAccepted 0, No simultaneous bindings 0Denied 0, Ignored 0Unspecified 0, Unknown HA 0Administrative prohibited 0, No resource 0Authentication failed MN 0, FA 0Bad identification 0, Bad request form 0Related Commands
debug aaa accounting
To display information on accountable events as they occur, use the debug aaa accounting command in privileged EXEC mode. To disable debugging output, use the no form of this command.
debug aaa accounting
no debug aaa accounting
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Usage Guidelines
The information displayed by the debug aaa accounting command is independent of the accounting protocol used to transfer the accounting information to a server. Use the debug tacacs and debug radius protocol-specific commands to get more detailed information about protocol-level issues.
You can also use the show accounting command to step through all active sessions and to print all the accounting records for actively accounted functions. The show accounting command allows you to display the active "accountable events" on the system. It provides systems administrators a quick look at what is happening, and may also be useful for collecting information in the event of a data loss of some kind on the accounting server. The show accounting command displays additional data on the internal state of the authentication, authorization, and accounting (AAA) security system if debug aaa accounting is turned on as well.
Examples
The following is sample output from the debug aaa accounting command:
Router# debug aaa accounting16:49:21: AAA/ACCT: EXEC acct start, line 1016:49:32: AAA/ACCT: Connect start, line 10, glare16:49:47: AAA/ACCT: Connection acct stop:task_id=70 service=exec port=10 protocol=telnet address=172.31.3.78 cmd=glare bytes_in=308 bytes_out=76 paks_in=45 paks_out=54 elapsed_time=14debug aaa authentication
To display information on authentication, authorization, and accounting (AAA) TACACS+ authentication, use the debug aaa authentication command in privileged EXEC mode. To disable debugging output, use the no form of this command.
debug aaa authentication
no debug aaa authentication
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Usage Guidelines
Use this command to learn the methods of authentication being used and the results of these methods.
Examples
The following is sample output from the debug aaa authentication command. A single EXEC login that uses the "default" method list and the first method, TACACS+, is displayed. The TACACS+ server sends a GETUSER request to prompt for the username and then a GETPASS request to prompt for the password, and finally a PASS response to indicate a successful login. The number 50996740 is the session ID, which is unique for each authentication. Use this ID number to distinguish between different authentications if several are occurring concurrently.
Router# debug aaa authentication6:50:12: AAA/AUTHEN: create_user user='' ruser='' port='tty19' rem_addr='172.31.60.15' authen_type=1 service=1 priv=16:50:12: AAA/AUTHEN/START (0): port='tty19' list='' action=LOGIN service=LOGIN6:50:12: AAA/AUTHEN/START (0): using "default" list6:50:12: AAA/AUTHEN/START (50996740): Method=TACACS+6:50:12: TAC+ (50996740): received authen response status = GETUSER6:50:12: AAA/AUTHEN (50996740): status = GETUSER6:50:15: AAA/AUTHEN/CONT (50996740): continue_login6:50:15: AAA/AUTHEN (50996740): status = GETUSER6:50:15: AAA/AUTHEN (50996740): Method=TACACS+6:50:15: TAC+: send AUTHEN/CONT packet6:50:15: TAC+ (50996740): received authen response status = GETPASS6:50:15: AAA/AUTHEN (50996740): status = GETPASS6:50:20: AAA/AUTHEN/CONT (50996740): continue_login6:50:20: AAA/AUTHEN (50996740): status = GETPASS6:50:20: AAA/AUTHEN (50996740): Method=TACACS+6:50:20: TAC+: send AUTHEN/CONT packet6:50:20: TAC+ (50996740): received authen response status = PASS6:50:20: AAA/AUTHEN (50996740): status = PASSdebug aaa pod
To display debug information for Radius Disconnect message processing at AAA subsystem level , use the debug aaa pod command in privileged EXEC mode. To disable debugging output, use the no form of this command.
debug aaa pod
no debug aaa pod
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Examples
The following is sample output from the debug aaa pod command:
Router#sh debuggingGeneral OS:AAA POD packet processing debugging is onThe scenario is a POD request is received from RADIUS 17.17.17.18 with the set of attributes displayed below and after processing PDSN sends back an ACK
Router#03:30:05: POD: 17.17.17.18 request queued03:30:05: ++++++ POD Attribute List ++++++03:30:05: 63ECE94C 0 00000009 username(336) 12 sri-sip-user03:30:05: 65FCEB50 0 00000009 clid(27) 11 0000000000103:30:05: 65FCEB64 0 00000021 cdma-disconnect-reason(420) 4 1(1)03:30:05: 65FCEB78 0 00000029 cdma-correlation-id(374) 8 0000000203:30:05:03:30:05: POD: Sending ACK from port 1700 to 17.17.17.18/1700debug ccm
To display debug information about CCM events and errors, use the debug ccm command in privileged EXEC mode. Use the no form of the command to disable debugging.
debug ccm {event | detail}
no debug ccm {event | detail}
Syntax Description
Defaults
No default values.
Command History
Examples
The following is sample output from the debug ccm command:
Active#deb ccm [event][detail]SAMI 6/3: Oct 24 09:23:39.597: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to upSAMI 6/3: Oct 24 09:23:39.601: CCM: New State[Not Ready]SAMI 6/3: Oct 24 09:23:39.601: CCM: ipmobile ccm RequiredSAMI 6/3: Oct 24 09:23:39.601: CCM: ipmobile ccm is InitiatorSAMI 6/3: Oct 24 09:23:39.601: CCM: ipmobile ccm ReadySAMI 6/3: Oct 24 09:23:39.601: CCM: ipmobile ccm Old State[Not Ready] Event[All Ready]SAMI 6/3: Oct 24 09:23:39.601: CCM: New State[Ready]SAMI 6/3: Oct 24 09:23:39.601: CCM: ipmobile ccm Adding Data Type[0] Length[322]SAMI 6/3: Oct 24 09:23:39.601: CCM: ipmobile ccm Adding Data Type[2] Length[80]SAMI 6/3: Oct 24 09:23:39.601: CCM: Send[Sync Session] Length[402] NumItems[2] Flags[0]SAMI 6/3: Oct 24 09:23:39.601: Client[ipmobile ccm] Type[0] Length[322]SAMI 6/3: Oct 24 09:23:39.601: 86 0E 00 00 00 00 00 09 00 43 01 00 01 00 00 00SAMI 6/3: Oct 24 09:23:39.601: 86 0E 00 00 00 00 00 09 00 3C 00 00 0E 00 00 01SAMI 6/3: Oct 24 09:23:39.601: 86 0E 00 00 00 00 00 09 00 3D 00 00 0D 02 02 09SAMI 6/3: Oct 24 09:23:39.601: 86 0C 00 00 00 00 00 09 00 3E 00 00 8C A0 86 0CSAMI 6/3: Oct 24 09:23:39.601: ...SAMI 6/3: Oct 24 09:23:39.601: Client[ipmobile ccm] Type[2] Length[80]SAMI 6/3: Oct 24 09:23:39.601: 86 0E 00 00 00 00 00 09 00 43 01 00 01 00 00 00SAMI 6/3: Oct 24 09:23:39.601: 86 3E 00 00 00 00 00 09 00 42 00 00 00 00 00 00SAMI 6/3: Oct 24 09:23:39.601: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00SAMI 6/3: Oct 24 09:23:39.601: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00SAMI 6/3: Oct 24 09:23:39.601: ...SAMI 6/3: Oct 24 09:23:39.601: CCM: New State[Dyn Sync]Standby#debug ccm [event][detail]SAMI 7/3: Oct 24 09:23:38.402: CCM: Receive[Sync Session] Length[402] NumItems[2] Flags[0]SAMI 7/3: Oct 24 09:23:38.402: CCM: New State[Not Ready]SAMI 7/3: Oct 24 09:23:38.402: Client[ipmobile ccm] Type[0] Length[322]SAMI 7/3: Oct 24 09:23:38.402: 86 0E 00 00 00 00 00 09 00 43 01 00 01 00 00 00SAMI 7/3: Oct 24 09:23:38.402: 86 0E 00 00 00 00 00 09 00 3C 00 00 0E 00 00 01SAMI 7/3: Oct 24 09:23:38.402: 86 0E 00 00 00 00 00 09 00 3D 00 00 0D 02 02 09SAMI 7/3: Oct 24 09:23:38.402: 86 0C 00 00 00 00 00 09 00 3E 00 00 8C A0 86 0CSAMI 7/3: Oct 24 09:23:38.402: ...SAMI 7/3: Oct 24 09:23:38.402: Client[ipmobile ccm] Type[2] Length[80]SAMI 7/3: Oct 24 09:23:38.402: 86 0E 00 00 00 00 00 09 00 43 01 00 01 00 00 00SAMI 7/3: Oct 24 09:23:38.402: 86 3E 00 00 00 00 00 09 00 42 00 00 00 00 00 00SAMI 7/3: Oct 24 09:23:38.402: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00SAMI 7/3: Oct 24 09:23:38.402: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00SAMI 7/3: Oct 24 09:23:38.402: ...SAMI 7/3: Oct 24 09:23:38.402: CCM:ipmobile ccm Recreate Session Active[0x7B000004] Standby[0x65000002]SAMI 7/3: Oct 24 09:23:38.402: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to upSAMI 7/3: Oct 24 09:23:38.402: CCM: ipmobile ccm RequiredSAMI 7/3: Oct 24 09:23:38.402: CCM: ipmobile ccm is InitiatorSAMI 7/3: Oct 24 09:23:38.402: CCM: ipmobile ccm ReadySAMI 7/3: Oct 24 09:23:38.402: CCM: ipmobile ccm Old State[Not Ready] Event[All Ready]SAMI 7/3: Oct 24 09:23:38.402: CCM: New State[Ready]debug condition
To limit output for some debug commands based on specified conditions, use the debug condition command in privileged EXEC mode. To remove the specified condition, use the no form of this command.
debug condition {called called number | calling calling | glbp interface group | interface interface | ip ip_address | mac-address mac_address | standby interface group | username username | vcid vc_id}
no debug condition {called called number | calling calling | glbp interface group | interface interface | ip ip_address | mac-address mac_address | standby interface group | username username | vcid vc_id}
Syntax Description
Defaults
All debugging messages for enabled protocol-specific debug commands are generated.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use the debug condition command to restrict the debug output for some commands. If any debug condition commands are enabled, output is only generated for interfaces associated with the specified keyword. In addition, this command enables debugging output for conditional debugging events. Messages are displayed as different interfaces meet specific conditions.
If multiple debug condition commands are enabled, output is displayed if at least one condition matches. All the conditions do not need to match.
The no form of this command removes the debug condition specified by the condition identifier. The condition identifier is displayed after you use a debug condition command or in the output of the show debug condition command. If the last condition is removed, debugging output resumes for all interfaces. You will be asked for confirmation before removing the last condition or all conditions.
Not all debugging output is affected by the debug condition command. Some commands generate output whenever they are enabled, regardless of whether they meet any conditions. The commands that are affected by the debug condition commands are generally related to dial access functions, where a large amount of output is expected. Output from the following commands is controlled by the debug condition command:
•
•
•
•
•
Ensure that you enable TID/IMSI-based conditional debugging by entering debug condition calling before configuring debug gprs gtp and debug gprs charging. In addition, ensure that you disable the debug gprs gtp and debug gprs charging commands using the no debug all command before disabling conditional debugging using the no debug condition command. This will prevent a flood of debugging messages when you disable conditional debugging.
Examples
Example 1
In the following example, the router displays debugging messages only for interfaces that use a username of fred. The condition identifier displayed after the command is entered identifies this particular condition.
Router# debug condition username fredCondition 1 setExample 2
The following example specifies that the router should display debugging messages only for VC 1000:
Router# debug condition vcid 1000Condition 1 set01:12:32: 1000 Debug: Condition 1, vcid 1000 triggered, count 101:12:32: 1000 Debug: Condition 1, vcid 1000 triggered, count 1Other debugging commands are enabled, but they will only display debugging for VC 1000.
Router# debug mpls l2transport vc eventAToM vc event debugging is onRouter# debug mpls l2transport vc fsmAToM vc fsm debugging is onThe following commands shut down the interface where VC 1000 is established.
Router(config)# interface s3/1/0Router(config-if)# shutThe debugging output shows the change to the interface where VC 1000 is established.
01:15:59: AToM MGR [13.13.13.13, 1000]: Event local down, state changed from establishedto remote ready01:15:59: AToM MGR [13.13.13.13, 1000]: Local end down, vc is down01:15:59: AToM SMGR [13.13.13.13, 1000]: Processing imposition update, vc_handle 6227BCF0,update_action 0, remote_vc_label 1801:15:59: AToM SMGR [13.13.13.13, 1000]: Imposition Disabled01:15:59: AToM SMGR [13.13.13.13, 1000]: Processing disposition update, vc_handle6227BCF0, update_action 0, local_vc_label 75501:16:01:%LINK-5-CHANGED: Interface Serial3/1/0, changed state to administratively down01:16:02:%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/1/0, changed state todownHere are examples of the new options for Cisco IOS Release 12.4(22)YD:
Router#debug condition called ?WORD Called numberRouter#debug condition calling ?WORD Calling numberRouter#debug condition glbp ?GigabitEthernet GigabitEthernet IEEE 802.3zRouter#debug condition glbp gigabitEthernet ?<0-1> GigabitEthernet interface numberRouter#debug condition interface ?Async Async interfaceAuto-Template Auto-Template interfaceBVI Bridge-Group Virtual InterfaceCDMA-Ix CDMA Ix interfaceCTunnel CTunnel interfaceDialer Dialer interfaceGigabitEthernet GigabitEthernet IEEE 802.3zGroup-Async Async Group interfaceLex Lex interfaceLoopback Loopback interfaceMultilink Multilink-group interfaceNull Null interfaceTunnel Tunnel interfaceVif PGM Multicast Host interfaceVirtual-PPP Virtual PPP interfaceVirtual-Template Virtual Template interfaceVirtual-TokenRing Virtual TokenRingvmi Virtual Multipoint InterfaceRouter#debug condition ip ?A.B.C.D IP addressRouter#debug condition mac-address ?H.H.H MAC addressRouter#debug condition standby ?GigabitEthernet GigabitEthernet IEEE 802.3zRouter#debug condition standby gigabitEthernet ?<0-1> GigabitEthernet interface numberRouter#debug condition username ?WORD Username for debug filteringRouter#debug condition vcid ?<1-4294967295> VC IDdebug ip mobile
To display IP mobility activities, use the debug ip mobile command in privileged EXEC mode.
debug ip mobile [advertise | dfp | host | local-area | redundancy | router | upd-tunneling | vpdn-tunneling | ipc | mib]
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use the debug ip mobile redundancy command to troubleshoot redundancy problems.
No per-user debugging output is shown for mobile nodes using the network access identifier (NAI) for the debug ip mobile host command. Debugging of specific mobile nodes using an IP address is possible through the access list.
Examples
The following is sample output from the debug ip mobile command when Foreign Agent reverse tunneling is enabled:
MobileIP:MN 14.0.0.30 deleted from ReverseTunnelTable of Ethernet2/1(Entries 0)The following is sample output from the debug ip mobile command:
Router# debug ip mobile ?advertise Mobility Agent advertisementsdfp DFP Agenthost Mobile host activitieslocal-area Local area mobilityredundancy Mobile redundancy activitiesrouter Mobile router activitiesudp-tunneling UDP Tunnelingvpdn-tunneling VPDN TunnelingThe following is sample output from the debug ip mobile advertise command:
debug ip mobile advertiseMobileIP: Agent advertisement sent out Ethernet1/2: type=16, len=10, seq=1, lifetime=36000,flags=0x1400(rbhFmGv-rsv-),Care-of address: 68.0.0.31Prefix Length ext: len=1 (8 )FA Challenge value:769C808D
The following is sample output from the debug ip mobile udp-tunneling command:
Router# debug ip mobile udp-tunnelingMobileIP: Received UDP Keep-Alive message from tunnel 7.0.0.2:434 - 7.0.0.15:16MobileIP: Sending UDP Keep-Alive message for tunnel 7.0.0.2:434 - 7.0.0.15:16MobileIP: MN 40.0.0.101 - HA rcv BindUpdAck accept from 7.0.0.67 HAA 7.0.0.2MobileIP: UDP Keep-Alive check point time for tunnel 7.0.0.2:434 - 7.0.0.15:16The following example shows output from the debug ip mobile ipc command:
The following debug trace on the control processor (CP) occurs when any of the configured DNS servers changes its state from available to unavailable, or vice versa. This debug is seen for all the traffic processors (TPs) from the CP:
SAMI 2/3: Apr 3 09:59:42.226: HA-IPMOBILE-IPC: CP sent DNSSwitchReq to TP 4 for DNS 172.20.212.113 with state 1SAMI 2/3: Apr 3 09:59:42.226: HA-IPMOBILE-IPC: CP sent DNSSwitchReq to TP 5 for DNS 172.20.212.113 with state 1SAMI 2/3: Apr 3 09:59:42.226: HA-IPMOBILE-IPC: CP sent DNSSwitchReq to TP 6 for DNS 172.20.212.113 with state 1SAMI 2/3: Apr 3 09:59:42.226: HA-IPMOBILE-IPC: CP sent DNSSwitchReq to TP 7 for DNS 172.20.212.113 with state 1SAMI 2/3: Apr 3 09:59:42.226: HA-IPMOBILE-IPC: CP sent DNSSwitchReq to TP 8 for DNS 172.20.212.113 with state 1Additionally, the following debug trace occurs on all TPs when any of the configured DNS server changes its state from available to unavailable or vice versa.
SAMI 2/4: Apr 3 09:59:42.207: HA-IPMOBILE-IPC: TP 4 rcv DNSSwitchReq from CP for DNS 172.20.212.113 with state 1SAMI 2/5: Apr 3 09:59:42.207: HA-IPMOBILE-IPC: TP 5 rcv DNSSwitchReq from CP for DNS 172.20.212.113 with state 1SAMI 2/6: Apr 3 09:59:42.219: HA-IPMOBILE-IPC: TP 6 rcv DNSSwitchReq from CP for DNS 172.20.212.113 with state 1SAMI 2/7: Apr 3 09:59:42.221: HA-IPMOBILE-IPC: TP 7 rcv DNSSwitchReq from CP for DNS 172.20.212.109 with state 1SAMI 2/8: Apr 3 09:59:42.221: HA-IPMOBILE-IPC: TP 8 rcv DNSSwitchReq from CP for DNS 172.20.212.113 with state 1debug ip mobile host
Use the debug ip mobile host EXEC command to display IP mobility events.
debug ip mobile host [acl | mac H.H.H]
no debug ip mobile host [acl | mac H.H.H]
Syntax Description
acl
(Optional) Access list. The values are 1-99.
mac H.H.H
(Optional) Displays debugging events for a host with the specified MAC address. The messages will include the MAC address when applicable.
Defaults
No default values.
Command History
Examples
The following is sample output from the debug ip mobile host command:
Router# debug ip mobile hostMobileIP: HA received registration for MN 20.0.0.6 on interface Ethernet1 using COA68.0.0.31 HA 66.0.0.5 lifetime 30000 options sbdmgvTMobileIP: Authenticated FA 68.0.0.31 using SPI 110 (MN 20.0.0.6)MobileIP: Authenticated MN 20.0.0.6 using SPI 300MobileIP: HA accepts registration from MN 20.0.0.6MobileIP: Mobility binding for MN 20.0.0.6 updatedMobileIP: Roam timer started for MN 20.0.0.6, lifetime 30000MobileIP: MH auth ext added (SPI 300) in reply to MN 20.0.0.6MobileIP: HF auth ext added (SPI 220) in reply to MN 20.0.0.6MobileIP: HA sent reply to MN 20.0.0.6debug ip mobile redundancy
Use the debug ip mobile redundancy EXEC command to display IP mobility redundancy events.
debug ip mobile redundancy {events | error | detail | periodic-sync}
no debug ip mobile redundancy {events | error | detail | periodic-sync}
Syntax Description
Defaults
No default values.
Command History
12.0(1)T
This command was introduced.
12.4(22)YD
The events, error, detail, and periodic-sync keywords were added.
Examples
The following is sample output from the debug ip mobile redundancy command:
Active#debug ip mobile redundancy [events][errors][details]SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding Mobile IP SR Version NVSE, length 14.SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN home agent address NVSE(60) home agent ip address: 14.0.0.1SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding CoA address NVSE(61) CoA address: 13.2.2.9SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN lifetime NVSE(62) MN lifetime: 36000SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN lifetime-left NVSE(68) MN lifetime left: 36000SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN flags NVSE(62) MN flags :SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN identification NVSE(62) MN identification CCAACD2F1SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding NAI extension Type(131) NAI derath1@cisco.comSAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding ip address extension Type(10) binding ip address type 7SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN home address NVSE(59) MN home address: 65.0.0.1SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding Accounting NVSE, length 14 Acct-Sess-Id: 23SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding Class NVSE, length 8.SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN service flags 0x8001SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding HA-RK for HA IP 14.0.0.1SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding MN CDMA STC NVSESAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding UDP Tunnel End Point CVSE 13.2.2.9:434 14.0.0.1:0x2SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Sending MobileIP SR Session Create Event with 322 bytes dataSAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding Mobile IP SR Version NVSE, length 14.SAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Adding Accounting Attributes NVSESAMI 6/3: Oct 23 10:15:08.939: MobileIP: SR: Sending MobileIP SR Session Update Periodic Sync with 80 bytes dataSAMI 6/3: Oct 23 10:20:38.943: MobileIP: UDP Keep-Alive failure for tunnel 14.0.0.1:434 - 13.2.2.9:434Standby#debug ip mobile redundancy [events][errors][details]SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Received MobileIP SR Session Create Event with 285 bytes dataSAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing SR Version NVSE(67), length 14.Major Version 1, Minor Version 0, Edit version 1SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN Home Agent Address 14.0.0.1 NVSE(60) length 16SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN CoA Address 13.2.2.9 NVSE(61) length 16SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN lifetime 36000 NVSE(62) length 14SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN lifetime-left 36000 NVSE(68) length 14SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN flags 2 NVSE(63) length 14SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN identificationNVSE(64) CCAC12F91 length 20SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN NAI derath1@cisco.com Exttype (131) length 19SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing binding Address type CVSE(10) Addr type: 7length (12)SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN Home Address 65.0.0.1 NVSE(59) length 16SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN GSA NVSE(32) length 60SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing HA Accounting NVSE(34)length (16) Acct-Sess-Id: 27SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN service flags CVSE(11) MN service flags: 8001length (12)SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN Revoc Exttype (137) length 8SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing MN CDMA STCNVSE(8194) length (11)SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing UDP Tunnel End Point CVSE(12)SAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Mobility binding for MN derath1@cisco.com createdSAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Adding Binding Registration Revocation flags 0x8000 and timestamp 2760709096 for MN derath1@cisco.comSAMI 7/3: Oct 24 09:25:10.206: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to upSAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Tunnel0 (MIPUDP/IP) created with src 14.0.0.1 dst 13.2.2.9SAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Setting up UDP Keep-Alive Timer for tunnel 14.0.0.1:0 - 13.2.2.9:0 with keep-alive 110SAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Starting the tunnel keep-alive timerSAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com MN derath1@cisco.com Insert route for 65.0.0.1/255.255.255.255 via gateway 13.2.2.9 (metric 1) on Tunnel0SAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Roam timer started for MN derath1@cisco.com using 65.0.0.1, lifetime 36000SAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Allocated AAA unique ID 0x00000004 for MN derath1@cisco.com. Acct-Session-Id=0x0000001B.SAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com Replacing Acct-Session-ID with 0x0000001BSAMI 7/3: Oct 24 09:25:10.206: MobileIP: derath1@cisco.com AAA: Start record sent for MN 65.0.0.1 using ID 0x00000004 and method list "default"SAMI 7/3: Oct 24 09:25:10.206: MobileIP: Converting GSA Extension to 1 SPI(s) and key(s)SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Binding synced from activeNAI derath1@cisco.com HA 65.0.0.1 CoA 14.0.0.1SAMI 7/3: Oct 24 09:25:10.206: MobileIP: Adding UDP Tunnel End Point CVSE 13.2.2.9:434 14.0.0.1:0x2SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Successfuly set CCM session in READY stateSAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Received MobileIP SR Session Update Periodic Sync Event with 80 bytes dataSAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Parsing SR Version NVSE(67), length 14.Major Version 1, Minor Version 0, Edit version 1SAMI 7/3: Oct 24 09:25:10.206: MobileIP: SR: Decoding Accounting Attributes NVSEExample of Periodic Sync Debug Output
SAMI 1/3: Oct 31 21:26:15.280: MobileIP: SR: Adding Mobile IP SR Version NVSE, length 14.SAMI 1/3: Oct 31 21:26:15.280: MobileIP: SR: Adding Accounting Attributes NVSEo/p packets = 0, i/p packets = 0,o/p octets = 0, i/p octets = 0,elapsed_time = 45356SAMI 1/3: Oct 31 21:26:15.280: MobileIP: SR: Sending MobileIP SR Session Update Periodic Sync with 68 bytes datadebug radius
To display information associated with RADIUS, use the debug radius command in privileged EXEC mode. To disable debugging output, use the no form of this command.
debug radius [accounting | authentication | brief | elog | failover | periodic-sync | retransmit | verbose ]
no debug radius [accounting | authentication | brief | elog | failover | retransmit | verbose ]
Syntax Description
Defaults
Debugging output in ASCII format is enabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
RADIUS is a distributed security system that secures networks against unauthorized access. Cisco supports RADIUS under the authentication, authorization, and accounting (AAA) security system. When RADIUS is used on the router, you can use the debug radius command to display detailed debugging and troubleshooting information in ASCII format. Use the debug radius brief command for abbreviated output displaying client/server interaction and minimum packet information. Use the debug radius hex command to display packet dump information that has not been truncated in hex format.
Examples
The following is sample output from the debug radius command:
Router# debug radiusSAMI 5/4: Aug 30 19:19:53.575: RADIUS(00000003): Send Accounting-Request to 100.100.0.101:1646 id 1646/2, len 255SAMI 5/4: Aug 30 19:19:53.575: RADIUS: authenticator 4B 84 16 7F 79 8C E9 8B - 3D BB 51 D4 C9 47 98 CCSAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Session-Id [44] 10 "00000003"SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Framed-IP-Address [8] 6 65.1.0.1SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Tunnel-Client-Endpoi[66] 11 "4.0.11.15"SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Vendor, Cisco [26] 30SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Cisco AVpair [1] 24 "mobileip-mn-flags=0x42"SAMI 5/4: Aug 30 19:19:53.575: RADIUS: User-Name [1] 30 "dgudimet-mip1@term-cause.com"SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Authentic [45] 6 RADIUS [1]SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Vendor, Cisco [26] 32SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Cisco AVpair [1] 26 "connect-progress=Call Up"SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Vendor, 3GPP2 [26] 12SAMI 5/4: Aug 30 19:19:53.575: RADIUS: cdma-ha-ip-addr [7] 6 4.0.11.16SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Session-Time [46] 6 45SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Input-Octets [42] 6 0SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Output-Octets [43] 6 0SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Input-Packets [47] 6 0SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Output-Packets [48] 6 0SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Terminate-Cause[49] 6 nas-request [10]SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Vendor, Cisco [26] 38SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Cisco AVpair [1] 32 "disc-cause-ext=Call Disconnect"SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Status-Type [40] 6 Stop [2]SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Service-Type [6] 6 Framed [2]SAMI 5/4: Aug 30 19:19:53.575: RADIUS: NAS-IP-Address [4] 6 100.100.2.117SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Acct-Delay-Time [41] 6 0SAMI 5/4: Aug 30 19:19:53.575: RADIUS: Received from id 1646/2 100.100.0.101:1646, Accounting-response, len 20SAMI 5/4: Aug 30 19:19:53.575: RADIUS: authenticator 85 E1 2B 52 56 66 5D 3C - 12 A0 4F 45 52 AB 4C 60debug tacacs
To display information associated with TACACS, use the debug tacacs command in privileged EXEC mode. To disable debugging output, use the no form of this command.
debug tacacs [accounting | authentication | authorization | events | packet]
no debug tacacs [accounting | authentication | authorization | events | packet]
Syntax Description
Command Modes
Privileged EXEC
Usage Guidelines
TACACS is a distributed security system that secures networks against unauthorized access. Cisco supports TACACS under the authentication, authorization, and accounting (AAA) security system.
Use the debug aaa authentication command to get a high-level view of login activity. When TACACS is used on the router, you can use the debug tacacs command for more detailed debugging information.
Examples
The following is sample output from the debug aaa authentication command for a TACACS login attempt that was successful. The information indicates that TACACS+ is the authentication method used.
Router# debug aaa authentication14:01:17: AAA/AUTHEN (567936829): Method=TACACS+14:01:17: TAC+: send AUTHEN/CONT packet14:01:17: TAC+ (567936829): received authen response status = PASS14:01:17: AAA/AUTHEN (567936829): status = PASSThe following is sample output from the debug tacacs command for a TACACS login attempt that was successful, as indicated by the status PASS:
Router# debug tacacs14:00:09: TAC+: Opening TCP/IP connection to 192.168.60.15 using source 10.116.0.7914:00:09: TAC+: Sending TCP/IP packet number 383258052-1 to 192.168.60.15 (AUTHEN/START)14:00:09: TAC+: Receiving TCP/IP packet number 383258052-2 from 192.168.60.1514:00:09: TAC+ (383258052): received authen response status = GETUSER14:00:10: TAC+: send AUTHEN/CONT packet14:00:10: TAC+: Sending TCP/IP packet number 383258052-3 to 192.168.60.15 (AUTHEN/CONT)14:00:10: TAC+: Receiving TCP/IP packet number 383258052-4 from 192.168.60.1514:00:10: TAC+ (383258052): received authen response status = GETPASS14:00:14: TAC+: send AUTHEN/CONT packet14:00:14: TAC+: Sending TCP/IP packet number 383258052-5 to 192.168.60.15 (AUTHEN/CONT)14:00:14: TAC+: Receiving TCP/IP packet number 383258052-6 from 192.168.60.1514:00:14: TAC+ (383258052): received authen response status = PASS14:00:14: TAC+: Closing TCP/IP connection to 192.168.60.15The following is sample output from the debug tacacs command for a TACACS login attempt that was unsuccessful, as indicated by the status FAIL:
Router# debug tacacs13:53:35: TAC+: Opening TCP/IP connection to 192.168.60.15 using source192.48.0.7913:53:35: TAC+: Sending TCP/IP packet number 416942312-1 to 192.168.60.15(AUTHEN/START)13:53:35: TAC+: Receiving TCP/IP packet number 416942312-2 from 192.168.60.1513:53:35: TAC+ (416942312): received authen response status = GETUSER13:53:37: TAC+: send AUTHEN/CONT packet13:53:37: TAC+: Sending TCP/IP packet number 416942312-3 to 192.168.60.15(AUTHEN/CONT)13:53:37: TAC+: Receiving TCP/IP packet number 416942312-4 from 192.168.60.1513:53:37: TAC+ (416942312): received authen response status = GETPASS13:53:38: TAC+: send AUTHEN/CONT packet13:53:38: TAC+: Sending TCP/IP packet number 416942312-5 to 192.168.60.15(AUTHEN/CONT)13:53:38: TAC+: Receiving TCP/IP packet number 416942312-6 from 192.168.60.1513:53:38: TAC+ (416942312): received authen response status = FAIL13:53:40: TAC+: Closing TCP/IP connection to 192.168.60.15firewall ip access-group
To specify that the IP firewall is profile-based, use the firewall ip access-group command in hotline-rules subcommand configuration mode. Use the no form to disable this feature.
firewall ip access-group {acl-no | word} {in | out}
no firewall ip access-group {acl-no | word} {in | out}
Syntax Description
acl-no
Specifies the ACL number. The ranges are 100-199 and 2000-2699.
word
Specifies the profile name.
in
out
Defaults
There are no default values.
Command Modes
hotline-rules subcommand mode.
Command History
Examples
The following example illustrates the firewall ip access-group command:
router (hotline-rules) # firewall ip access-group 199ip fragment first minimum size
To set the first fragment size in order to avoid further fragmentation of the second fragment in the network, use the ip fragment first minimum size global configuration command. Use the no form of the command to disable this feature.
ip fragment first minimum size size
no ip fragment first minimum size size
Syntax Description
Defaults
There are no default values.
Command Modes
Global configuration.
Command History
Usage Guidelines
The size includes only the payload and does not include any header. The payload size must be in multiples of 8 bytes. Otherwise, the command is rejected with the following error.
Error Message Error Message %% First fragment payload size is not in multiples of 8 bytesThe command configuration only indicates the minimum value for the payload of the first fragment.
If the existing fragmentation mechanism in CEF selects the first fragment larger than the configured value, then the configuration is not enforced. Otherwise, CEF generates more fragments than expected.
If the configured first fragment size is more than the MTU of the output interface, the configured value is not enforced.
Examples
The following packet capture shows how the packet would be for IP and IP-IP tunnel packet when ip fragment first minimum size 80 is configured:
IP Packet:
10:27:59.660 IST Mon Apr 13 2009 Relative Time: 2.990258Packet 8 of 26 In: FastEthernet0/1Ethernet Packet: 114 bytesDest Addr: 0003.FEAB.D871, Source Addr: 001F.6C89.0D74Protocol: 0x0800IP Version: 0x4, HdrLen: 0x5, TOS: 0x00Length: 100, ID: 0x0092, Flags-Offset: 0x2000 (more fragments)TTL: 255, Protocol: 1 (ICMP), Checksum: 0x582D (OK)Source: 50.1.1.200, Dest: 13.2.2.15ICMP Type: 8, Code: 0 (Echo Request)Checksum: 0x1A45 ERROR: C661Identifier: 006A, Sequence: 0000Echo Data:0 : 0000 0000 E794 B5A4 ABCD ABCD ABCD ABCD ABCD ABCD ....................20 : ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ....................40 : ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ....................60 : ABCD ABCD ABCD ABCD ABCD ABCD ............IP-IP tunnel packet:
====================================================================20:39:40.394 IST Sun Apr 12 2009 Relative Time: 2.967188Packet 7 of 22 In: FastEthernet0/1Ethernet Packet: 114 bytesDest Addr: 0003.FEAB.D871, Source Addr: 001F.6C89.0D74Protocol: 0x0800IP Version: 0x4, HdrLen: 0x5, TOS: 0x00Length: 100, ID: 0x8008, Flags-Offset: 0x2000 (more fragments)TTL: 255, Protocol: 4 (IP-IP), Checksum: 0xD9F5 (OK)Source: 14.0.0.1, Dest: 50.1.1.150IP Version: 0x4, HdrLen: 0x5, TOS: 0x00Length: 1500, ID: 0x0086, Flags-Offset: 0x0000TTL: 255, Protocol: 1 (ICMP), Checksum: 0x40D0 (OK)Source: 50.1.1.200, Dest: 65.0.0.2ICMP Type: 8, Code: 0 (Echo Request)Checksum: 0x72CB ERROR: 7C6AIdentifier: 005E, Sequence: 0000Echo Data:0 : 0000 0000 E49E 6020 ABCD ABCD ABCD ABCD ABCD ABCDip local pool
To configure a local pool of IP addresses to be used when a remote peer connects to a point-to-point interface, to generate traps when pool utilization reaches a high or low threshold in percentage, use the ip local pool command in global configuration mode. To remove a range of addresses from a pool (the longer of the no forms of this command), or to delete an address pool (the shorter of the no forms of this command), use one of the no forms of this command.
ip local pool {default | poolname} [low-ip-address [high-ip-address]] [group group-name] [cache-size size] [priority 0-255] [theshold low-threshold high-threshold] [ recycle ]
no ip local pool poolname low-ip-address [high-ip-address]
no ip local pool {default | poolname}
Syntax Description
Defaults
No address pools are configured. Any pool created without the optional group keyword is a member of the base system group.
Command Modes
Global configuration
Command History
Usage Guidelines
Use the ip local pool command to create one or more local address pools from which IP addresses are assigned when a peer connects. You may also add another range of IP addresses to an existing pool. To use a named IP address pool on an interface, use the peer default ip address pool interface configuration command. A pool name can also be assigned to a specific user using authentication, authorization, and accounting (AAA) RADIUS and TACACS functions.
If no named local IP address pool is created, a default address pool is used on all point-to-point interfaces after the ip address-pool local global configuration command is issued. If no explicit IP address pool is assigned, but pool use is requested by use of the ip address-pool local command, the special pool named "default" is used.
The optional group keyword and associated group name allows the association of an IP address pool with a named group. Any IP address pool created without the group keyword automatically becomes a member of a base system group.
An IP address pool name can be associated with only one group. Subsequent use of the same pool name, within a pool group, is treated as an extension of that pool, and any attempt to associate an existing local IP address pool name with a different pool group is rejected. Therefore, each use of a pool name is an implicit selection of the associated pool group.
Note
All IP address pools within a pool group are checked to prevent overlapping addresses; however, no checks are made between any group pool member and a pool not in a group. The specification of a named pool within a pool group allows the existence of overlapping IP addresses with pools in other groups, and with pools in the base system group, but not among pools within a group. Otherwise, processing of the IP address pools is not altered by their membership in a group. In particular, these pool names can be specified in peer commands and returned in RADIUS and AAA functions with no special processing.
IP address pools can be associated with Virtual Private Networks (VPNs). This association permits flexible IP address pool specifications that are compatible with a VPN and a VPN routing and forwarding instance (VRF).
The IP address pools can also be used with the translate commands for one-step vty-async connections and in certain AAA or TACACS+ authorization functions. Refer to the chapter "Configuring Protocol Translation and Virtual Asynchronous Devices" in the Cisco IOS Terminal Services Configuration Guide and the "System Management" part of the Cisco IOS Configuration Fundamentals Configuration Guide for more information.
Low and High Thresholds
Cisco Mobile Wireless Home Agent Release 3.1 enhanced the CISCO-IP-LOCAL-POOL-MIB to generate traps when pool utilization reached a low threshold or high threshold in percentage. Objects "cIpLocalPoolPercentAddrThldLo" and "cIpLocalPoolPercentAddrThldHi" are defined for the high and low threshold watermark, respectively.
When the percentage of used addresses in an IP local pool equals or exceeds the high threshold, a "cilpPercentAddrUsedHiNotif" notification is generated. Once the notification is generated, it is disarmed and will not be generated again until the number of used addresses falls below the value indicated by "cIpLocalPoolPercentAddrThldLo".
When the percentage of used addresses in an IP local pool falls below the low threshold, a "cilpPercentAddrUsedLoNotif" notification will be generated. Once the notification is generated, it is disarmed and will not be generated again until the number of used addresses equals or exceeds the value indicated by "cIpLocalPoolPercentAddrThldHi".
IP address pools are displayed with the show ip local pool EXEC command.
Examples
The following example creates a pool of local IP addresses named "XYZPool," which contain all IP addresses in the range 100.1.1.1 to 100.1.1.10. The group is named "MWG", and the command specifies a cache size of 50, and a low and high threshold of 50 and 90:
Router(config)# ip local pool XYZPool 100.1.1.1 100.1.1.10 group MWG cache-size 50 threshold 50 90The following example creates a group of local IP address pools named "pool2," which contains all IP addresses in the range 172.16.23.0 to 172.16.23.255:
ip local pool pool2 172.16.23.0 172.16.23.255The following example configures a pool of 1024 IP addresses:
no ip local pool defaultip local pool default 10.1.1.0 10.1.4.255
Note
The following example configures multiple ranges of IP addresses into one pool:
ip local pool default 10.1.1.0 10.1.9.255ip local pool default 10.2.1.0 10.2.9.255The following examples show how to configure two pool groups and IP address pools in the base system group:
ip local pool p1_g1 10.1.1.1 10.1.1.50 group grp1ip local pool p2_g1 10.1.1.100 10.1.1.110 group grp1ip local pool p1_g2 10.1.1.1 10.1.1.40 group grp2ip local pool lp1 10.1.1.1 10.1.1.10ip local pool p3_g1 10.1.2.1 10.1.2.30 group grp1ip local pool p2_g2 10.1.1.50 10.1.1.70 group grp2ip local pool lp2 10.1.2.1 10.1.2.10
In the example:
•
•
•
Note that IP address 10.1.1.1 overlaps groups grp1, grp2, and the base system group. Also note that there is no overlap within any group including the base system group, which is unnamed.
The following examples show configurations of IP address pools and groups for use by a VPN and VRF:
ip local pool p1_vpn1 10.1.1.1 10.1.1.50 group vpn1ip local pool p2_vpn1 10.1.1.100 10.1.1.110 group vpn1ip local pool p1_vpn2 10.1.1.1 10.1.1.40 group vpn2ip local pool lp1 10.1.1.1 10.1.1.10ip local pool p3_vpn1 10.1.2.1 10.1.2.30 group vpn1ip local pool p2_vpn2 10.1.1.50 10.1.1.70 group vpn2ip local pool lp2 10.1.2.1 10.1.2.10
The examples show configuration of two pool groups, including pools in the base system group, as follows:
•
•
•
Note that IP address 10.1.1.1 overlaps groups vpn1, vpn2, and the base system group. Also note that there is no overlap within any group including the base system group, which is unnamed.
The VPN needs a configuration that selects the proper group by selecting the proper pool based on remote user data. Thus, each user in a given VPN can select an address space using the pool and associated group appropriate for that VPN. Duplicate addresses in other VPNs (other group names) are not a concern, because the address space of a VPN is specific to that VPN.
In the example, a user in group vpn1 is associated with some combination of the pools p1_vpn1, p2_vpn1, and p3_vpn1, and is allocated addresses from that address space. Addresses are returned to the same pool from which they were allocated.
Here is example output from Cisco IOS Release 12.4(22)YD that illustrates the recycle keyword:
Router(config)#ip local pool xyz 1.1.1.1 ?A.B.C.D Last IP address of rangecache-size Number of free entries to searchgroup Create ip local pool grouppriority Priority metricrecycle recycle address before reusethreshold Threshod percentage for pool group range<cr>Router(config)#ip local pool xyz 1.1.1.1 1.1.1.11 ?cache-size Number of free entries to searchgroup Create ip local pool grouppriority Priority metricrecycle recycle address before reusethreshold Threshod percentage for pool group range<cr>Router(config)#ip local pool xyz 1.1.1.1 1.1.1.11 recycle ?delay Delay before address is available for reassignmentRouter(config)#ip local pool xyz 1.1.1.1 1.1.1.11 recycle delay ?<0-65535> recycle delay in Secondsmwtbg28-6500a-5-3(config)#ip local pool xyz 1.1.1.1 1.1.1.11 recycle delay 3 ?cache-size Number of free entries to searchthreshold Threshod percentage for pool group range<cr>Related Commands
ip mobile cdma ha-chap send attribute
To include the Mobile Equipment Identifier (MEID) in the HA-CHAP access request, use the ip mobile cdma ha-chap send attribute command in global configuration mode. To disable this feature, use the no form of the command.
ip mobile cdma ha-chap send attribute [A1 | A2 | A3]
no ip mobile cdma ha-chap send attribute [A1 | A2 | A3]
Syntax Description
A1
(Optional) Send A1 (Calling Station id) in ha-chap.
A2
(Optional) Send A2(ESN) in ha-chap.
A3
(Optional) Send A3(MEID) in ha-chap.
Defaults
There are no default values.
Command Modes
Global configuration
Command History
Usage Guidelines
The MEID is a new attribute introduced in IS-835D that will eventually replace the ESN. In the interim, both attributes are supported on the Home Agent.
The MEID NVSE will be appended by the PDSN node to the Mobile IP RRQ. When the MEID NVSE is received on the HA, and the ip mobile cdma ha-chap send attribute A3 command is configured, then the MEID value is included in the HA-CHAP access request.
Examples
The following example illustrates the ip mobile cdma ha-chap send attribute A3 command:
ip mobile cdma ha-chap send attribute A3ip mobile debug include username
To display the username or IMSI condition with each debug statement, use the ip mobile debug include username command. To disable this function, use the no form of the command.
ip mobile debug include username
no ip mobile debug include username
Syntax Description
There are no keywords or arguments for this command.
Defaults
There are no default values for this command.
Command Modes
Global configuration
Command History
Usage Guidelines
The following example illustrates the ip mobile debug include username command:
Router# ip mobile debug include usernameip mobile home-agent
To enable and control Home Agent services on the router, use the ip mobile home-agent global configuration command. To disable these services, use the no form of this command.
ip mobile home-agent [home-agent address] [accounting] [binding overwrite] [broadcast] [care-of-access acl] [data-path-idle minutes] [dynamic-address] [lifetime number] [aaa | attribute framed-pool] [message-string][nat-detect] [non-hotline profile profile-id] [[options [access-type] | [cvse gre-key] | [rrq reject framed-ip-addr in-use] | [mn-identifier calling-station-id]] [redundancy] [reject-static-addr] [revocation [exclude-nai]] [replay seconds] [resync-sa] [reverse-tunnel off] [roam-access acl] [hotline profile profile-id] [strip-realm] [suppress-unreachable] [local-timezone] [nat] [unknown-ha [accept | deny]] [send-mn-address]
no ip mobile home-agent [home-agent address] [accounting] [binding overwrite ] [broadcast] [care-of-access acl] [data-path-idle] [dynamic-address] [lifetime number] [aaa | attribute framed-pool] [message-string] [nat-detect] [non-hotline profile profile-id] [[options [access-type] | [cvse gre-key] | [rrq reject framed-ip-addr in-use] | [mn-identifier calling-station-id]] [redundancy] [reject-static-addr] [revocation] [replay seconds] [resync-sa] [reverse-tunnel off] [roam-access acl] [hotline profile profile-id] [strip-realm] [suppress-unreachable] [local-timezone] [nat] [unknown-ha [accept | deny]] [send-mn-address]
Syntax Description
Defaults
This command is disabled by default. Broadcasting is disabled by default. Reverse tunnel support is enabled by default. ICMP Unreachable messages are sent by default.
Command Modes
Global configuration
Command History
Usage Guidelines
This command enables and controls Home Agent services on the router. Changes to service take effect immediately; however, broadcast and lifetime settings for previously registered mobile nodes are unaffected. Tunnels are shared by mobile nodes registered with the same endpoints, so the reverse-tunnel-off keyword also affects registered mobile nodes.
The Home Agent is responsible for processing registration requests from the mobile node and setting up tunnels and routes to the care-of address. Packets to the mobile node are forwarded to the visited network.
The Home Agent will forward broadcast packets to mobile nodes if they registered with the service. However, heavy broadcast traffic utilizes the CPU of the router. The Home Agent can control where the mobile nodes roam by the care-of-access parameter, and which mobile node is allowed to roam by the roam-access parameter.
When a registration request comes in, the Home Agent will ignore requests when Home Agent service is not enabled or the security association of the mobile node is not configured. The latter condition occurs because the security association must be available for the MH authentication extension in the reply. If a security association exists for the Foreign Agent (IP source address or care-of address in request), the Foreign Agent is authenticated, and then the mobile node is authenticated. The Identification field is verified to protect against replay attack. The Home Agent checks the validity of the request (see Table 5) and sends a reply. (Replay codes are listed in Table 6.) A security violation is logged when Foreign Agent authentication, MH authentication, or Identification verification fails. (The violation reasons are listed in Table 7.)
After registration is accepted, the Home Agent creates or updates the mobility binding of the mobile node, which contains the expiration timer. If no binding existed before this registration, a virtual tunnel is created, a host route to the mobile node via the care-of address is added to the routing table, and gratuitous ARPs are sent out. For deregistration, the host route is removed from the routing table, the virtual tunnel interface is removed (if no mobile nodes are using it), and gratuitous ARPs are sent out if the mobile node is back home. Mobility binding is removed (along with its associated host route and tunnel) when registration lifetime expires or deregistration is accepted.
By default, the HA uses the entire NAI string as username for authentication (which may be with local security association or retrieved from the AAA server). The strip-nai-realm parameter instructs the HA to strip off the realm part of NAI (if it exists) before performing authentication. Basically, the mobile station is identified by only the username part of NAI.
When the packet destined for the mobile node arrives on the Home Agent, the Home Agent encapsulates the packet and tunnels it to the care-of address. If the Don't fragment bit is set in the packet, the outer bit of the IP header is also set. This allows the Path MTU Discovery to set the MTU of the tunnel. Subsequent packets greater than the MTU of the tunnel will be dropped and an ICMP datagram too big message sent to the source. If the Home Agent loses the route to the tunnel endpoint, the host route to the mobile node will be removed from the routing table until tunnel route is available. Packets destined for the mobile node without a host route will be sent out the interface (home link) or to the virtual network (see the description of suppress-unreachable keyword). For subnet-directed broadcasts to the home link, the Home Agent will send a copy to all mobile nodes registered with the broadcast routing option.
Table 5 describes how the Home Agent treats registrations with various bits set when authentication and identification are passed.
Table 6 lists the Home Agent registration reply codes.
Table 7 lists security violation codes.
Table 7 Security Violation Codes
1
No mobility security association.
2
Bad authenticator.
3
Bad identifier.
4
Bad SPI.
5
Missing security extension.
6
Other.
Examples
The following example enables broadcast routing and specifies a global registration lifetime of 7200 seconds (2 hours):
ip mobile home-agent ?aaa HA AAA access settingsaccounting Enable Home Agent accountingaddress HA address for virtual networksbroadcast Enable forwarding of broadcast packetscare-of-access Care-of roaming capability access-listdata-path-idle Allowed idle time (in minutes)<1-65535>dynamic-address Configure Dynamic HA assignment addresslifetime Global lifetime for mobile hostslocal-timezone Use Local Time Zone to generate Identification Fieldsnat NAT traversal settingsnat-detect Enable NAT detect on Home Agentredundancy Home Agent redundancy operationreject-static-addr Reject Used Mobile Node Static IP Addr Requestreplay Set replay protection timestamp value for all SAsresync-sa Turn on resync of SA after failurereverse-tunnel Reverse Tunneling for Mobile IPrevocation Enable Registration Revocationroam-access Mobile host roaming capability access-listsend-mn-address Send MN address as Framed-IP-Address in HA-CHAPstrip-realm Strip off NAI realm partsuppress-unreachable Disable sending ICMP unreachabletemplate Configure a tunnel template for tunnels to the Home Agentunknown-ha Unknown HA address in registration requestHere is an example of the framed-pool attribute:
ip mobile home-agent aaa attribute Framed-Poolip local pool haPool 70.1.1.1 70.1.1.254ip mobile home-agentip mobile virtual-network 70.1.1.0 255.255.255.0ip mobile host nai @cisco.com interface FastEthernet1/0 aaa load-saHere is an example of the ip mobile home-agent data-path-idle command for 60 minutes:
Router(config)#ip mobile home-agent data-path-idle 60Here is an example of how to overwrite an existing binding with the binding-overwrite option:
router(config)# ip mobile home-agent binding-overwriteip local pool cisco-pool 5.1.0.1 5.1.1.0ip mobile host nai @cisco.com address pool local cisco-poolinterface Null0 aaa load-saHere is an example of the ip mobile home agent options [access-type 3gpp2 suppress aaa access-request | access-type 3gpp2 mhae optional] command:
Router#conf terminalRouter(config)# ip mobile home agent optionsRouter(config-ipmobile-ha-options)#access-type 3gpp2 suppress aaa access-requestRelated Commands
ip mobile home-agent accounting
To enable the Home Agent accounting feature, use the ip mobile home-agent accounting command in global configuration mode.
ip mobile home-agent accounting {method name| default}
Syntax Description
Defaults
There are no default values for this command.
Command Modes
Global configuration
Command History
Usage Guidelines
The Home Agent cannot open more than 100k bindings if HA Accounting feature is enabled.
Examples
The following example illustrates the ip mobile home-agent accounting command:
Router# ip mobile home-agent accounting method name
ip mobile home-agent author-fail send-response
To configure the HA to send an RRP to the FA even if AAA sends an Access-Reject or AAA does not respond, use the ip mobile home-agent author-fail send-response global configuration command. Use the no form of the command to disable this feature.
ip mobile home-agent author-fail send-response
no ip mobile home-agent author-fail send-response
Syntax Description
There are no keywords or arguments for this command.
Defaults
This command is disabled by default.
Command Modes
Global configuration
Command History
Usage Guidelines
When this command is configured, the HA sends an RRP to the FA even if AAA sends Access-Reject or AAA does not respond. This RRP contains MHAE filled with all zeros and also error code "MN Failed Authentication". This RRP does not contain FHAE even if FHAE is enabled for that FA.
Examples
The following example illustrates the ip mobile home-agent author-fail send-response command:
Router(config)#ip mobile home-agent author-fail send-responseip mobile home-agent binding-overwrite
To enable deletion of stale bindings identified by the Home Address, MAC address, and NAI information in the registration request, use the ip mobile home-agent binding-overwrite Global configuration command. Use the no form of the command to disable this feature.
ip mobile home-agent binding-overwrite
no ip mobile home-agent binding-overwrite
Syntax Description
There are no keywords or arguments for this command.
Defaults
The feature is disabled by default.
Command Modes
Global configuration.
Command History
Examples
Here is an example of the ip mobile home-agent binding-overwrite command:
Overwrite Existing Binding HA Config
ip mobile home-agent binding-overwriteip local pool cisco-pool 5.1.0.1 5.1.1.0ip mobile host nai @cisco.com address pool local cisco-poolinterface Null0 aaa load-saFA Config
simulator mip mn profile 3registration lifetime 65535registration retries 0registration flags 42revocation flags 00home-agent 81.81.81.81secure home-agent spi 100 key ascii ciscosecure aaa spi 2 key ascii cisconai cisco-%f@cisco.compmip skip subtype 2 idtype macno extension mn-aaano extension mn-fano extension nat traversalextension revocationsimulator mip mn profile 4registration lifetime 65535registration retries 0registration flags 42revocation flags 00home-agent 81.81.81.81home-address 5.0.0.2 0secure home-agent spi 100 key ascii ciscosecure aaa spi 2 key ascii cisconai pepsi-%f@cisco.compmip skip subtype 2 idtype macno extension mn-aaano extension mn-fano extension nat traversalextension revocationsimulator mip scenario 3mn profile 3fa 2.2.2.200mn id 20simulator mip scenario 4mn profile 4fa 2.2.2.200mn id 21ip mobile home-agent congestion
To configure the HA to take a predefined action when congestion hits a predefined threshhold, use the ip mobile home-agent congestion global configuration command. Use the no form of the command to disable this feature.
ip mobile home-agent congestion dfp_weight action reject | abort | redirect HA-address | drop data-path-idle minutes
no ip mobile home-agent congestion
Syntax Description
Defaults
The default DFP value is that corresponding to 70% congestion state.
Command Modes
Global configuration
Command History
Usage Guidelines
Congestion action configurations are mutually exclusive. You must explicitly configure congestion and the corresponding weight.
The DFP weight at which congestion occurs is configurable. The default DFP value is that corresponding to a "70% congestion state". The default value is 0.
The DFP value used is calculated solely for the control processor in the Single IP model.
When the congestion state is reached, four possible actions can occur:
1.
2.
3.
4.
Examples
Here is sample output that shows a congested state:
router#show ip mobile home-agent congestionHome Agent congestion information :Current congestion level: CongestedConfigured Action : AbortConfigured threshold : 10Current DFP value = 9ip mobile home-agent dynamic-address
To set the Home Agent Address field in a Registration Response packet, use the ip mobile home-agent dynamic-address command in global configuration. Use the no form of the command to disable this feature, or to reset the field.
ip mobile home-agent dynamic-address ip address
no ip mobile home-agent dynamic-address ip address
Syntax Description
Defaults
The Home Agent Address field will be set to ip address.
Command Modes
Global configuration
Command History
Examples
The following example illustrates the ip mobile home-agent dynamic address command:
Router# ip mobile home-agent dynamic address 1.1.1.1ip mobile home-agent foreign-agent
To select either 3gpp2 or WiMax access-type for a subscriber based on the IP address of the Foreign Agent through which the request came, or to enable or disable FA authentication for that FA, use the ip mobile home-agent foreign-agent global configuration command. Use the no form of the command to disable this feature.
ip mobile home-agent foreign-agent {default | {ip-address mask}} access-type {3gpp2 | wimax} {disable-fhae | enable-fhae}
no ip mobile home-agent foreign-agent {default | {ip-address mask }} access-type {3gpp2 | wimax} {disable-fhae | enable-fhae}
Syntax Description
Defaults
This command is disabled by default.
Command Modes
Global configuration
Command History
12.4(15)XM
This command was introduced.
12.4(22)YD
enable-fhae and disable-fhae keywords were added.
Usage Guidelines
This configuration is not considered if the respective access-type is not configured under radius. For example, radius vsa send authentication 3gpp2/wimax for authentication, and radius vsa send accounting 3gpp2/wimax for accounting.
In Cisco Home Agent Release 5.0, the actions taken based on the tech-type value take precedence over any locally-configured per-Foreign Agent Access Type configuration introduced in HA 4.0. For example, if the locally configured value indicates 3GPP2 and the tech-type value indicates wimax, then the actions for WiMax are taken.
enable-fhae ensures that all control messages (RRQs, RRPs and revocation messages) to and from FAs defined by ip-address and mask ( or for all FAs on default keyword) will have FHAE. An exception is RRPs when AAA sends an Access-Reject, or AAA does not send any response and this feature is enabled.
disable-fhae rejects RRQs and revocation messages with FHAE from FAs defined by ip-address and mask (or for all FAs on the default keyword). If RRQs with FHAE are received, then an RRP with FA Failed authentication error is sent.
If a Wimax FA is not configured with enable-fhae or disable-fhae, and the RRQs from that FA have FHAE, then FHAE is mandated for that FA after successful authentication, and is the current behavior.
Examples
The following example illustrates the ip mobile home-agent foreign-agent access-type command:
router(config)#ip mobile home-agent foreign-agent ?A.B.C.D Foreign Agent addressdefault Default Access-typerouter(config)#ip mobile home-agent foreign-agent default ?access-type Access-Typerouter(config)#ip mobile home-agent foreign-agent 10.109.1.1 ?A.B.C.D Foreign Agent maskrouter(config)#$ome-agent foreign-agent 10.109.1.1 255.255.255.0 ?access-type Access-Typerouter(config)#$ome-agent foreign-agent 10.109.1.0 255.255.255.0 acrouter(config)#$foreign-agent 10.109.1.0 255.255.255.0 access-type ?3gpp2 3GPP2 Access-typewimax WIMAX Access-typerouter(config)#$foreign-agent 10.109.1.0 255.255.255.0 access-typeip mobile home-agent host-config url
To configure a URLon the HA that allows the MN to download configuration parameters, use the ip mobile home-agent host-config url command in globabl configuration mode. Use the no form of the command to disable the feature.
ip mobile home-agent host-config url
no ip mobile home-agent host-config url
Syntax Description
url
The generic url that you can specify that allows the MN to download its configuration parameters.
Defaults
This command is disabled by default.
Command Modes
Global configuration
Command History
Usage Guidelines
This command is necessary because sometimes the HA is not able to provide the configuration requested by the MN. This command configures a generic site specified by the URL that helps the MN to download its configuration parameters.
Examples
The following example illustrates the ip mobile home-agent host-config command:
Router(config)# ip mobile home-agent host-config http://www.cisco.com
ip mobile home-agent hotline
To distinguish Profile or Rule based hot-lining for each user (MN), and to enter the hotline-rules sub configuration mode, use the ip mobile home-agent hotline command in global configuration mode. Use the no form of the command to disable this feature.
ip mobile home-agent hotline {profile word}
no ip mobile home-agent hotline {profile word}
Syntax Description
profile word
Denotes whether hotlining will be profile based, or rule based. If not configured, hotlining will be rule based.
Defaults
The default value is rule based hotlining.
Command Modes
Global configuration
Command History
Examples
The following example illustrates the ip mobile home-agent hotline command:
Router(config)# [no] ip mobile home-agent hotline profile wordRouter(hotline-rules)#Router(hotline-rules)#?exit Exit from hotline profile configuration modefirewall Firewall Rulesno Negate the hotline rulesredirect Redirection Rulesip mobile home-agent ipredirect nat-enable
To enable Network Address Translation (NAT) for redirect packets, use the ip mobile home-agent ipredirect nat-enable command in global configuration mode. To disable NAT for redirect packets, use the no form of this command.
ip mobile home-agent ipredirect nat-enable
no ip mobile home-agent ipredirect nat-enable
Syntax Description
This command has no arguments or keywords.
Command Default
NAT is not enabled for redirect packets.
Command Modes
Global configuration
Command History
Examples
The following example shows how to enable NAT for redirect packets:
HA(config)# ip mobile home-agent ipredirect nat-enableip mobile home-agent max-binding
To limit the number of bindings that can be opened on the HA, use the ip mobile home-agent max-binding command in global configuration mode. Use the no form of the command to disable the feature.
ip mobile home-agent max-binding max-binding value
no ip mobile home-agent max-binding max-binding value
Syntax Description
Defaults
This CLI limits the number of bindings that can be opened on the HA. The default value is 500,000 with a maximum configurable value of 1 million. The range of the max-binding-value is between 1 and 1,000,000.
Command Modes
Global configuration
Command History
12.4(15)XM
This command was introduced.
12.4(22)YD
The default and maximum binding values were changed to 500,000 and 1,000,000.
Examples
The following example illustrates the ip mobile home-agent max-binding command:
Router# ip mobile home-agent max-binding 500000ip mobile home agent options
To configure the HA to perform various options listed below, use the ip mobile home agent options global configuration command. Use the no form of the command to disable all options.
ip mobile home agent options [access-type | cvse | mn-identifier | rrq ]
no ip mobile home agent options [access-type | cvse | mn-identifier | rrq ]
Syntax Description
Defaults
There are no default values.
Command Modes
Global configuration
Command History
Usage Guidelines
This command is used to enable different HA options.
Examples
The following example illustrates the ip mobile home agent options [access-type 3gpp2 suppress aaa access-request | access-type 3gpp2 mhae optional command:
Router(config)# ip mobile home agent optionsaccess-type 3gpp2 suppress aaa access-requestip mobile home-agent redundancy
To configure the Home Agent for redundancy, use the ip mobile home-agent redundancy subcommand under the ip mobile home-agent global configuration command. To remove the address, use the no form of this command.
ip mobile home-agent redundancy
no ip mobile home-agent redundancy
Syntax Description
There are no keywords or arguments for this command.
Defaults
There are no default values.
Command Modes
Subcommand of the ip mobile home-agent global configuration command.
Command History
12.0(2)T
This command was introduced.
12.3(7)XJ1
The mode active-standby option was added.
12.4(22)YD
Removed all keywords and arguments.
Usage Guidelines
You must first configure the ip mobile home-agent command to use this sub-command.
Examples
The following is sample output from the ip mobile home-agent redundancy command that specifies an HSRP group name of SanJoseHA:
Router# ip mobile home-agent redundancy
ip mobile home-agent reject-static-addr
To configure the HA to reject Registration Requests from MNs under certain conditions, use the ip mobile home-agent reject-static-addr sub-command under the ip mobile home-agent global configuration command.
ip mobile home-agent reject-static-addr
Syntax Description
This command has not arguments or keywords
Command Modes
Sub-command of the ip mobile home-agent global configuration command.
Command History
Usage Guidelines
You must first configure the ip mobile home-agent command to use this sub-command.
If an MN which has binding to the HA with a static address, and tries to register with the same static address again, then the HA rejects the second RRQ from MN.
Examples
The following example illustrates the ip mobile home-agent reject-static-addr command:
Router# ip mobile home-agent reject-static-addr
ip mobile home-agent resync-sa
To configure the HA to clear out the old cached security associations and requery the AAA server, use the ip mobile home-agent resync-sa command global configuration command.
ip mobile home-agent resync-sa x
Syntax Description
Command Modes
Global configuration.
Command History
Usage Guidelines
When a MN tries to reregister with the HA, the time change from the original timestamp is checked. If that time period is less than x, and the MN fails authentication, then the HA will not requery the AAA server for another SA.
If the MN reregisters with the HA, and the time between registrations is greater than x, and the MN fails registrations, then the HA will clear out the old SA and requery the AAA server.
Examples
The following example illustrates the ip mobile home-agent resync-sa command:
Router# ip mobile home-agent resync-sa 10
ip mobile home-agent revocation
To enable support for MIPv4 Registration Revocation on the HA, use the ip mobile home-agent revocation command in global configuration mode. Use the no form of the command to disable this feature.
ip mobile home-agent revocation [exclude-nai][timeout 1-100] [retransmit 0-100] [timestamp msec] [ignore 1-99 | 1300-1999 | word fa access-list name]
no ip mobile home-agent revocation [exclude-nai][timeout 1-100] [retransmit 0-100] [timestamp msec] [ignore 1-99 | 1300-1999 | word fa access-list name]
Syntax Description
Defaults
The default configuration is no ip mobile home-agent revocation. The timeout default setting is 3 seconds, the retransmit default setting is 3 retransmissions, and the default timestamp setting is seconds.
Command Modes
Global configuration.
Command History
12.3(7)XJ.
This command was introduced.
12.4(22)YD2
The exclude-nai option was added.
Examples
The following example illustrates the ip mobile home-agent revocation command:
Router# (config)#ip mobile home-agent revoc timeout ?
<1-100> Wait time (default 3 secs)
Router# (config)#ip mobile home-agent revoc retransmit ?
<0-100> Number of retries for a transaction (default 3)
ip mobile home-agent revocation ignore
To enable the HA to send a revocation acknowledgement to the PDSN/FA but not delete the binding, use the ip mobile home-agent revocation ignore global configuration command. Use the no form of the command to disable this function.
ip mobile home-agent revocation ignore fa acl
no ip mobile home-agent revocation ignore fa acl
Syntax Description
fa-acl
Specifies either an acl number 1-99, an FA Standard expanded Access-list number 1300-1999, or an FA Access-list name.
Defaults
There are no default values.
Command Modes
Global configuration.
Command History
Usage Guidelines
When a subscriber roams between their service provider's network and another partner service provider's network, the PDSN gateway sends a Resource Revocation message to the Home Agent to remove the subscriber. This causes timing problems, so Selective FA Revocation selectively ignores these "remove subscriber" requests. Revocation is done on a Foreign Agent basis. Thus, a given HA will statically configure a list of Foreign Agents from which to ignore the "remove subscriber" messages.With Selectable FA Revocation, the Hybrid PDSN/FA will go through the above conditions and send the revocation to the Home Agent. However, in this case the HA ignores the revocation, but sends a RR response to the PDSN.
As a result, the MN and Home Agent still have a binding state but the PDSN/FA no longer has a PPP session/visitor table entry. Eventually, the mobile goes active and has Data Ready to Send, where the 1x RF channel DRS=1 is included. In this scenario, the VLR is not queried and the OpenRP message to the PDSN has MEI set to 1. Regardless of the MEI value, the PDSN will initiate PPP, and send a RRQ with the previously assigned home address. In this case HA will accept the Re-registration.
Examples
Here is an example of the ip mobile home-agent revocation ignore command:
You can ignore revocation from the FA by specifying the standard access-list number or standard access-list name.
Configuring access-list name to ignore the requests from COA 5.1.1.4
Router(config)#ip access-list standard ?<1-99> Standard IP access-list number<1300-1999> Standard IP access-list number (expanded range)WORD Access-list nameRouter(config)#ip access-list standard fa_acl1Router(config-std-nacl)#permit 5.1.1.4Configuring access-list number to ignore the requests from COA 5.1.1.5
Router(config)#ip access-list standard ?<1-99> Standard IP access-list number<1300-1999> Standard IP access-list number (expanded range)WORD Access-list nameRouter(config)#ip access-list standard 1Router(config-std-nacl)#permit 5.1.1.5Configuring access-list name to selectively ignore requests from FA 5.1.1.4 . This is to associate the above created acl with the ip mobile home-agent revocation ignore command.
Router((config)#ip mobile home-agent revocation ignore ?<1-99> fa Access-list numberWORD fa Access-list nameRouter(config)#ip mobile home-agent revocation ignore fa_acl1Configuring the access-list number to selectively ignore requests from FA 5.1.1.5
Router(config)#ip mobile home-agent revocation ignore 1ip mobile home-agent switchover aaa swact-notification
To send Switchover-Action (swact) Notification after a switchover in Accounting watchdog/stop messages for each MIP session, use the ip mobile home-agent switchover aaa swact-notification Global configuration commmand. Use the no form of the command to disable this feature.
ip mobile home-agent switchover aaa swact-notification
no ip mobile home-agent switchover aaa swact-notification
Syntax Description
There are no keywords or arguments for this command.
Defaults
The command is disabled by default.
Command History
Examples
This example configures the HA to send swact notification in an accounting message for each mip session:
router(config)# ip mobile home-agent switchover aaa swact-notificationip mobile home-agent template tunnel
To configure a Home Agent to use the template tunne, use the ip mobile home-agent template tunnel command in global configuration. Use the no form to disable this feature.
ip mobile home-agent template tunnel interface id address home agent address
no ip mobile home-agent template tunnel interface id address home agent address
Syntax Description
Defaults
There are no default values.
Command Modes
Global configuration.
Command History
Examples
The following example illustrates the ip mobile home-agent template tunnel command:
Router(config)# interface tunnel 10
ip access-group 150 in -------> apply access-list 150
Router (config)# access-list 150 deny any 10.10.0.0 0.255.255.255access-list permit any any
------> permit all but traffic to 10.10.0.0 network
Router (config)# ip mobile home-agent template tunnel 10 address 10.0.0.1
ip mobile host
To configure the mobile host or mobile node group, use the ip mobile host global configuration command. For PDSN, use this command to configure the static IP address or address pool for multiple flows with the same NAI.
ip mobile host {lower [upper] | nai string {static-address {addr1 [addr2] [addr3] [addr4] [addr5] | local-pool name} | address {addr | pool {local name | vpdn-tunnel | dhcp-proxy-client [dhcp-server addr]} {interface name | virtual-network network_address mask} [skip-chap | aaa [load-sa permanent]] [authorized-pool pool] [skip-aaa-reauthentication [reregistration | deregistration]] [care-of-access acl] [lifetime number]
no ip mobile host {lower [upper] | nai string {static-address {addr1 [addr2] [addr3] [addr4] [addr5] | local-pool name} | address {addr | pool {local name | vpdn-tunnel | dhcp-proxy-client [dhcp-server addr]} {interface name | virtual-network network_address mask} [skip-chap | aaa [load-sa permanent]] [authorized-pool pool] [skip-aaa-reauthentication [reregistration | deregistration]] [care-of-access acl] [lifetime number]
Syntax Description
Defaults
No host is configured.
Command Modes
Global configuration
Command History
Usage Guidelines
This command configures the mobile host or mobile node group (ranging from lower address to upper address) to be supported by the Home Agent. These mobile nodes belong to the network on an interface or a virtual network (using the ip mobile virtual-network command). The security association for each mobile host must be configured using the ip mobile secure command or downloaded from an AAA server. When using an AAA server, the router will attempt to download all security associations when the command is entered. If no security associations are retrieved, retrieval will be attempted when a registration request arrives or the clear ip mobile secure command is entered.
All hosts must have security associations for registration authentication. Mobile nodes can have more than one security association. The memory consumption calculations shown in Table 8 are based on the assumption of one security association per mobile node.
The nai keyword allows you to specify a particular mobile station or range of mobile stations. The mobile station can request a static IP address (static-address keyword), which is configured using the addr1 variable (for a specific address) or the local-pool keyword (for an IP address from an address pool). Or, the mobile station can request a dynamic address (address keyword), which is configured using the addr variable (for a specific address) or the pool keyword (for an IP address from a pool or DHCP server). If this command is used with the PDSN proxy Mobile IP feature and a realm is specified in the ip mobile proxy-host nai command, then only a pool of addresses can be specified in this command.
The vpdn-tunnel option is added to the ip mobile host command. This keyword is mandatory to bring up MIP-LAC tunnel. You must also configure the vpdn-tunnel virtual-template option of the ip mobile realm command to enable the MIP-LAC feature. Every MIP session matching this realm will be mapped to a corresponding L2TP session. When MIP-LAC is enabled for user(s), and the HA does not go to AAA for authentication / authorization, local configuration will be checked for VPDN parameters.
The address pool can be defined by a local pool or using a DHCP proxy client. For DHCP, the interface name specifies the address pool from which the DHCP server selects and dhcp-server specifies DHCP server address.
Security associations can be stored using one of three methods:
•
•
•
Each method has advantages and disadvantages, which are described in Table 8.
Note
Note
If the aaa load-sa option is configured, the Home Agent caches the SA locally on first registration. In this case the Home Agent will not invoke the RADIUS authorization procedure for re-registration.
If aaa load-sa skip-aaa-reauthentication is configured, the Home Agent caches the SA locally on first registration; however, the Home Agent will not invoke HA-CHAP procedure for re-registration.
The aaa load-sa permanent option is not supported on the Mobile Wireless Home Agent, and should not be configured.
Note
By default, authentication occurs for all three events listed in the configuration. If the above CLI is not configured, then authentication happens at the time of registration, re-registration and de-registration events. However, please note that, if the MN comes with new SPI, the configuration for skip-aaa-reauth is ignored for that user.
There is a configuration for the re-registration and de-registration events which may be on a per-realm, i.e., VRF basis. ip mobile host nai string aaa load-sa skip-aaa-reauth [ reregistration | deregistration]
The default configuration is that authentication occurs for all three events. i.e. ip mobile host nai string aaa load-sa. Some examples, assuming the default configuration is in place are ip mobile host nai string aaa load-sa skip-aaa-reauth will result in AAA authentication occurring for registration only.
ip mobile host nai string aaa load-sa skip-aaa-reauth deregistration will result in AAA authentication occurring for registration and reregistration.
ip mobile host nai string aaa skip-chap will result in no authentication occurring for initial registration, reregistration, and deregistration events.
ip mobile host nai string aaa load-sa skip-aaa-reauth reregistration will result in AAA authentication occurring for registration and deregistration only.
Note
Note
-ip mobile host nai @cisco.com virtual-network ip1 mask1 aaa
-ip mobile host nai user1@cisco.com virtual-network ip2 mask2 aaa
-ip mobile secure host nai @cisco.com spi 100 key ascii CISCO.
Here, the configured SA for @cisco.com is not applied to user1@cisco.com. If a local SA needs to be applied for this user, an SA needs to be configured separately:
ip mobile secure host nai user1@cisco.com spi 100 key ascii YAHOO.
This feature is supported only for 3GPP2 users and not for Wimax users.
Note
This command supports caching of SA even when using a locally configured SA, if load-sa is configured. Hence, with load-sa configured, re-authorization is prevented even when using a locally configured SA. Additionally, when skip-aaa-reauth is configured, re-authentication with AAA is prevented when using a locally configured SA.
The [rereg | dereg] options, if specified, gives you the flexibility to prevent re-authentication and re-authorization for either re-registration or de-registration only.
Examples
The following example configures a mobile node group to reside on virtual network 20.0.0.0 and store its security associations on the AAA server:
ip mobile host 20.0.0.1 20.0.0.3 virtual-network 20.0.0.0 aaaThe following example configures a local pool of dynamic addresses to be used in assigning IP addresses to mobile stations in the cisco.com domain.
ip mobile host nai @cisco.com address pool local mobilenodes virtual-network 9.0.0.0 255.0.0.0 aaa lifetime 65535The following example configures a local pool of static addresses to be used in assigning IP addresses to mobile stations in the cisco.com domain.
ip mobile host nai @cisco.com static-address local-pool mobilenodesRelated Commands
ip mobile options
To enable the configuration of Mobile IP options, and to enter Mobile IP configuration mode, use the ip mobile options command in global configuration mode. To exit Mobile IP configuration mode, use the no form of this command.
ip mobile options [realm case-insensitive] [om-metric-interval]
no ip mobile options [realm case-insensitive] [om-metric-interval]
Syntax Description
realm case-insensitive
(Optional) Enables the Realm Case-Insensitive feature.
om-metric-interval
(Optional) Configures an interval for the collection of OM metrics.
Command Modes
Global configuration.
Related Commands
Usage Guidelines
The Realm Case Insensitive feature enables you to match the configured commands against RRQ NAIs with case insensitive realm parameters. However, the username is still considered to be case sensitive.
Examples
Here is an example:
HA(config)# ip mobile optionsRelated Commands
om-metric-interval
Configures an interval for the collection of OM metrics.
realm case-insensitive
Enables the Realm Case-Insensitive feature.
ip mobile radius disconnect
To enable the processing Radius Disconnect messages on the HA, use the ip mobile radius disconnect command in global configuration mode. Use the no form of this command to disable processing Radius Disconnect messages on the HA.
ip mobile radius disconnect
no ip mobile radius disconnect
Syntax Description
There are no arguments or keywords for this command.
Defaults
The default setting is that there is no processing of Radius Disconnect messages.
Command Modes
Global configuration.
Command History
Usage Guidelines
Note
Note
Examples
The following example illustrates the ip mobile radius disconnect command:
Router# ip mobile radius disconnect
ip mobile realm
To enable inbound user sessions to be disconnected when specific session attributes are presented, and to configure policy parameters on the Home Agent and attach/identify them to QoS through an APN interface, use the ip mobile realm global configuration command in global configuration mode. Use the no form of the command to disable this feature.
ip mobile realm {realm | nai} [in-acl in-acl-name] [out-acl out-acl-name] {vrf vrf-name [ha-addr ip-address] [aaa-group [accounting aaa-acct-group | authentication aaa-auth-group]]} periodic minutes accounting [data-path-idle timer value] [dns dynamic-update method word] [dns server primary dns server address secondary dns server address [redirect] [assign]] [hotline [capability [all | httpredir | ipfilter | ipredir | profile] redirect [ip | http] | [non-hotline profile profile-id] | rule-based flag]] [vpdn-tunnel virtual-template number [setup-time number]] [service-policy {input policy-name [peak-rate rate] | output policy-name [peak-rate rate]}] [any-traffic | next-hop next-hop-ipadress] [mip-udp-tunnel template-num] [absolute-time interval-in-seconds]
no ip mobile realm {realm | nai} [in-acl in-acl-name] [out-acl out-acl-name] [vrf vrf-name ha-addr ip-address] [aaa-group [accounting aaa-acct-group | authentication aaa-auth-group]] periodic minutes accounting [data-path-idle timer value] [dns dynamic-update method word] [dns server primary dns server address secondary dns server address [redirect] [assign]] [[hotline [capability [all | httpredir | ipfilter | ipredir | profile] redirect [ip | http] [non-hotline profile profile-id] | rule-based flag]] [vpdn-tunnel virtual-template number [setup-time number]] [service-policy {input policy-name [peak-rate rate] | output policy-name [peak-rate rate]}] [any-traffic | next-hop next-hop-ipadress] [mip-udp-tunnel template-num] [absolute-time interval-in-seconds]
Syntax Description
Defaults
When the setup-time is not specified, the default value is 60.
Command Modes
Global configuration
Command History
Usage Guidelines
This command defines the VRF for the domain "@xyz.com". The IP address of the Home Agent corresponding to the VRF is also defined at which the MOIP tunnel will terminate. IP address of the Home Agent should be a routable IP address on the box. Optionally, the AAA accounting and/or authentication server groups can be defined per VRF. If AAA accounting server group is defined, all accounting records for the users of the realm will be sent to the specified group. If AAA authentication server group is defined, HA-CHAP is sent to the server(s) defined in the group.
The word argument should be specified as nai/realm and in the format of @cisco.com/username@cisco.com. Otherwise, the command will give error message. At least one form of hot-lining should be selected. There is no default rule to activate rule-based hot-lining for the user. Un-configuring this CLI will erase the rule-based hot-lining capability for the user. The values in above command are mentioned as flags. The flag values are explained here:
0x00000001 Profile-based Hot-Lining is supported (Using RADIUS Filter-Id attributes)
0x00000002 Rule-based Hot-Lining is supported using Filter Rule
0x00000004 Rule-based Hot-Lining is supported using HTTP Redirection Rule.
0x00000008 Rule-based Hot-Lining is supported using IP Redirection Rule.The [service-policy {input policy-name [peak-rate rate] | output policy-name [peak-rate rate]}] variables allows you to configure a policy and associated rate for one or more user bindings belonging to that policy on the basis of NAI/realm. This can be configured for both upstream and downstream traffic. The burst and the peak-burst can be configured under the policy-map configuration.
The setup-time for the vpdn-tunnel configuration is optional. The range of values for setup-time is from 5 secs to 300 secs. The default value for setup-time is 60 seconds. The default value is taken in to consideration, when user does not specify the setup-time option explicitly.
Configured setup-time is the maximum tolerance time, starting from the creation of the PPP IDB within which a regenerated PPP session has to come fully up. If this period of time has elapsed and the L2TP tunnel is not up yet, the mobile IP module proceeds to tear down this session's L2TP session, PPP IDB and mobile binding. Also, please note that the number option of tunnel vtemplate number must match the number configured in the corresponding interface virtual-template command.
The periodic keyword defines the sending of interim accounting records at an interval corresponding to the value minutes.
The per-VRF configuration takes precedence over per-realm configuration, which takes precedence over the aaa accounting update periodic configuration.
Note
Release 5.1 Information
To enable the DNS redirection feature for a specific realm configure the following commands:
ip mobile realm word dns server primary DNS ip secondary DNS ipip mobile realm word dns server redirectIf the scond command is configured before the first command, the HA will display the following error message
Since the DNS redirection feature is realm-based, only @ or @domain is a valid realm. For example, xyz@domain, xyz or xyz@ will not be valid realm option.In case of an error, the HA will display the following error message:
If no command to unconfigure the primary DNS server and secondary DNS server is configured for a particular realm, this will automatically disable DNS redirection for that realm.
When unconfiguring the DNS redirection feature, issuing the no command of the CLI will not remove the existing binding for that realm from the HA. Only the DNS redirection feature will be disabled
To enable DNS servers monitoring for their availability, configure the following IP SLA CLIs. This set of IP SLA configuration commands are required for all the DNS server nodes that need to be monitored by the HA.
Assign a ipsla number and configure the IP address that needs to be monitored:
[no] ip sla ipsla-numbericmp-echo ip-addrfrequency freqConfigure ip sla to notify if above configured DNS server is not available:
[no] ip sla reaction-configuration ipsla-number react timeout threshold-type immediate action-type trapAndTriggerConfigure ip sla to notify if above configured DNS server is available:
[no] ip sla reaction-configuration ipsla-number react connectionLoss threshold-type immediate action-type trapAndTriggerConfigure ip sla to generate notification for availability and unavailability of DNS servers configured above:
[no] ip sla enable reaction-alertsConfigure ip sla to start monitoring configure DNS server configured above
[no] ip sla sch ipsla-number start-time now life foreverWhere:
ipsla-number—IP SLA number that has been assigned for checking the DNS server.
ip-addr—The IP address of the DNS server
freq—The frequency of the probe in seconds (default 60)
5.2 Release Information:
•
•
–
–
–
Examples
The following example identifies the DNS dynamic update keyword:
router(config)#ip mobile realm @ispxyz1.com dns ?dynamic-update Enable 3GPP2 IP reachabilityserver DNS server configurationThe following example identifies the hotlining and vrf keywords:
router(config)# ip mobile realm @ispxyz1.com ?dns Configure DNS detailshotline Hotlining of the mobile hostsvrf VRF for the realmRouter(config)#ip mobile realm {realm | nai} hotline ?capability Hotlining Capability of the mobile hostsredirect Redirect ip address for upstream trafficRouter(config)#[no] ip mobile realm {realm | nai} hotline capability ?all Support all Hotline Capabilitieshttpredir HTTPRedir Rule-based Hot-Liningipfilter IPFilter Rule-based Hot-Liningipredir IPRedir Rule-based Hot-Liningprofile Profile-based Hot-LiningRouter(config)#Here is a policy map configuration example:
Router(config)#ip mobile realm <nai | realm> ?dns Configure DNS detailshotline Hotlining of the mobile hostsservice-policy QoS service policy attachmentvrf VRF for the realmRouter(config)#ip mobile realm <nai | realm> service-policy ?input Attach policy-map in input direction (downstream)output Attach policy-map in output direction (upstream)<cr>Router(config)#ip mobile realm <nai | realm> service-policy input ?WORD Policy-map name in input directionRouter(config)#ip mobile realm <nai | realm> service-policy input <policyname> ?output Attach policy-map in output direction (upstream)peak-rate Police rate<cr>Router(config)#ip mobile realm <nai | realm> service-policy input <policyname> peak-rate ?<8000-2000000000> Police rate value in bpsRouter(config)#ip mobile realm <nai | realm> service-policy input <policyname> peak-rate <rate> ?output Attach policy-map in output direction (upstream)<cr>Router(config)#ip mobile realm <nai | realm> service-policy input <policyname> peak-rate <rate> output ?WORD Policy-map name in output directionRouter(config)#ip mobile realm <nai | realm> service-policy input <policyname> peak-rate <rate> output <policyname> ?peak-rate Police rateRouter(config)#ip mobile realm <nai | realm> service-policy input <policyname> peak-rate <rate> output <policyname> peak-rate ?<8000-2000000000> Police rate value in bpsRouter(config)#ip mobile realm <nai | realm> service-policy input <policyname> peak-rate <rate> output <policyname> peak-rate <rate>Here is an example of the data-path-idle timer-value option:
cisco-1@cisco.com (Bindings 1):MAC Addr 0000.0001.0000Home Addr 5.1.0.1Care-of Addr 2.2.2.200, Src Addr 2.2.2.200Lifetime granted 10:00:00 (36000), remaining 09:52:39IdleTime granted 00:10:00 (10 min), remaining 00:09:24Flags sBdmg-T-, Identification CCA7F408.1Tunnel0 src 81.81.81.81 dest 2.2.2.200 reverse-allowedRouting Options - (T)Reverse-tunnelAccess-tech Type: 3GPP2 (3GPP2 1xRTT/HRPD)Revocation negotiated - I-bit not setip mobile secure
To specify the mobility security associations for the mobile host, visitor, Home Agent, Foreign Agent, and proxy host, use the ip mobile secure global configuration command. To remove the mobility security associations, use the no form of this command.
ip mobile secure {host lower-address [upper-address] | visitor address | home-agent address | foreign-agent address} {inbound-spi spi-in | outbound-spi spi-out | spi spi} key hex string [replay timestamp [number] algorithm md5 mode prefix-suffix]
no ip mobile secure {host lower-address [upper-address] | visitor address | home-agent address | foreign-agent address} {inbound-spi spi-in | outbound spi-out | spi spi} key hex string [replay timestamp [number] algorithm md5 mode prefix-suffix]
Syntax Description
Defaults
No security association is specified.
Command Modes
Global configuration
Command History
12.0(1)T
This command was introduced.
12.2
The lower-address and upper-address arguments were added.
Usage Guidelines
The security association consists of the entity address, SPI, key, replay protection method, authentication algorithm, and mode.
The SPI is the 4-byte index that selects the specific security parameters to be used to authenticate the peer. The security parameters consist of the authentication algorithm and mode, replay attack protection method, timeout, and IP address.
On a Home Agent, the security association of the mobile host is mandatory for mobile host authentication. If desired, configure a Foreign Agent security association on your Home Agent. On a Foreign Agent, the security association of the visiting mobile host and security association of the Home Agent are optional. Multiple security associations for each entity can be configured.
If registration fails because the timestamp value is out of bounds, the time stamp of the Home Agent is returned so the mobile node can reregister with the time-stamp value closer to that of the Home Agent, if desired.
Note
Note
Examples
The following example shows mobile node 20.0.0.1, which has a key that is generated by the MD5 hash of the string:
Router# ip mobile secure host 20.0.0.1 spi 100 key hex 12345678123456781234567812345678Related Commands
ip mobile tunnel
To specify the settings of tunnels created by Mobile IP, use the ip mobile tunnel interface configuration command.
ip mobile tunnel {crypto map map-name | route-cache | path-mtu-discovery | nat {inside | outside}}
Syntax Description
Defaults
Disabled.
Command Modes
Interface configuration.
Command History
Usage Guidelines
Path MTU discovery is used by end stations to find a packet size that does not need fragmentation between them. Tunnels have to adjust their MTU to the smallest MTU interior to achieve this. This is described in RFC 2003.
The discovered tunnel MTU should be aged out periodically to possibly recover from case where sub-optimum MTU existed at time of discovery. It is reset to the outgoing interface's MTU.
Examples
The following example sets the discovered tunnel MTU to expire in ten minutes:
Router# ip mobile tunnel reset-mtu-time 600
ip mobile tunnel ip-ip conserve-ip-id threshold
To conserve the unique IP ID for a FA-HA IP-in-IP tunnel, use the ip mobile tunnel ip-ip conserve-ip-id threshold global configuration command. Use the no form of the command to disable this feature.
ip mobile tunnel ip-ip conserve-ip-id threshold value
no ip mobile tunnel ip-ip conserve-ip-id threshold value
Syntax Description
Defaults
This feature is not enabled by default, and there is no default threshold.
Command Modes
Global configuration.
Command History
Usage Guidelines
When configuring this command, if the packet size is more than the threshold value, it is sent with a unique IP ID in the outer IP header. Otherwise, the identification field is set to 0. If you set the threshold to 1400 bytes, then packets with size 1401 and above are sent out with unique IP ID.
ip mobile virtual-network
To define a virtual network, use the ip mobile virtual-network global configuration command. To remove the virtual network, use the no form of this command.
ip mobile virtual-network net mask [address addr]
no ip mobile virtual-network net mask [address addr]
Syntax Description
Defaults
No Home Agent addresses are specified.
Command Modes
Global configuration.
Command History
Usage Guidelines
This command inserts the virtual network into the routing table to allow mobile nodes to use the virtual network as their home network. The network is propagated when redistributed to other routing protocols.
Note
Examples
The following example adds the virtual network 20.0.0.0 to the routing table and specifies that the HA IP address is configured on the loopback interface for that virtual network:
Router# ip mobile virtual-network
int e0ip addr 1.0.0.1 255.0.0.0standby ip 1.0.0.10standby name SanJoseHAint lo0ip addr 20.0.0.1 255.255.255.255ip mobile home-agentip mobile virtual-network 20.0.0.0 255.255.0.0 20.0.0.1ip mobile home-agent standby SanJoseHA virtual-networkmatch flow pdp
To classify an HA flow, use the match flow pdp command in global class-map configuration mode.
match flow pdp
no match flow pdp
Syntax Description
There are no keywords or arguments for this command.
Defaults
There are no default values.
Command Modes
Global class-map configuration.
Command History
Examples
The following example illustrates the match flow pdp command:
Router(conf t)# class-map <class-name>Router(config-cmap)#match flow ?pdp PDP context of flowRouter(config-cmap)# match flow pdpRouter(config-cmap)# endom-metric-interval
To configure an interval for the collection of OM metrics, use the om-metric-interval command in Mobile IP configuration mode. To restore the default setting, use the no form of this command.
om-metric-interval {15 | 30 | 60}
no om-metric-interval
Syntax Description
15
Specifies an OM metric interval of 15 minutes.
30
Specifies an OM metric interval of 30 minutes. This is the default setting.
60
Specifies an OM metric interval of 60 minutes.
Defaults
If you do not configure an om-metric-interval command, the default interval is 30 minutes.
Command Modes
Mobile IP configuration
Command History
Usage Guidelines
The OM metric interval is the period during which the Home Agent collects data to determine the maximum number of active bindings, active 3GPP2 bindings, and active WIMAX bindings that are present.
Examples
The following example shows how to configure an OM metric interval of 60 minutes:
HA(config)# ip mobile optionsHA(config-ipmobile-options)# om-metric-interval 60Related Commands
ip mobile options
Enables the configuration of Mobile IP options, and enters Mobile IP configuration mode
realm case-insensitive
Enables the Realm Case-Insensitive feature.
police rate pdp
To invoke police action on a binding flow, use the police rate pdp command in global policy-map configuration mode.
police rate pdp [burst bytes] [peak-rate pdp [peak-burst bytes]] conform-action action [exceed-action action [violate-action action]]
no police rate pdp [burst bytes] [peak-rate pdp [peak-burst bytes]] conform-action action [exceed-action action [violate-action action]]
Syntax Description
Defaults
There are no default values.
Command Modes
Policy-map configuration submode.
Command History
Usage Guidelines
The peak-rate pdp parameter ensures that policing is done based on a rate specified for each binding flow. The actual rate is specified using the mobile ip command described above.
The peak-rate pdp parameter has the following restrictions:
•
•
•
Examples
The following example illustrates the police rate pdp command:
Router(config)# policy-map <policyname>Router(config)# class <class-name>Router(config-pmap-c)# ?police PoliceRouter(config-pmap-c)#police ?<8000-2000000000> Bits per secondcir Committed information raterate Specify police rateRouter(config-pmap-c)#police rate ?pdp APN PDP contextRouter(config-pmap-c)#police rate pdp ?burst Specify 'burst' parameterconform-action action when rate is less than conform burstpeak-burst Specify 'peak-burst' parameter for 'peak-rate'peak-rate Specify peak rate<cr>Router(config-pmap-c)#police rate pdp burst 1000 peak-rate ?pdp APN PDP contextRouter(config-pmap-c)#police rate pdp burst 1000 peak-rate pdp ?conform-action action when rate is less than conform burstpeak-burst Specify 'peak-burst' parameter for 'peak-rate'Router(config-pmap-c)#police rate pdp burst 1000 peak-rate pdp peak-burst 5000 ?conform-action action when rate is less than conform burst<cr>Router(config-pmap-c)#police rate pdp burst 1000 peak-rate pdp peak-burst 5000 conform-action <transmit> ?exceed-action action when rate is within conform and conform + exceed burst<cr>Router(config-pmap-c)#police rate pdp burst 1000 peak-rate pdp peak-burst 5000 conform-action <transmit> exceed-action <drop> ?violate-action action when rate is greater than conform + exceed burst<cr>radius-server attribute 32 include-in-access-req
To send RADIUS attribute 32 (NAS-Identifier) in an access-request or accounting-request, use the radius-server attribute 32 include-in-access-req global configuration command. To disable sending RADIUS attribute 32, use the no form of this command.
radius-server attribute 32 include-in-access-req [format]
no radius-server attribute 32 include-in-access-req
Syntax Description
format
(Optional) A string sent in attribute 32 containing an IP address (%i), a hostname (%h), or a domain name (%d).
Defaults
RADIUS attribute 32 is not sent in access-request or accounting-request packets.
Command Modes
Global configuration.
Command History
Usage Guidelines
Using the radius-server attribute 32 include-in-access-req makes it possible to identify the network access server (NAS) manufacturer to the RADIUS server by sending RADIUS attribute 32 (NAS-Identifier) in an access-request or accounting-request. If you configure the format argument, the string sent in attribute 32 will include an IP address, a hostname, or a domain name; otherwise, the Fully Qualified Domain Name (FQDN) is sent by default.
Here are additional attribute options that are available to configure:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Examples
The following example shows a configuration that sends RADIUS attribute 32 in the access-request with the format configured to identify a Cisco NAS:
router (config)# radius-server attribute 32 include-in-access-req format cisco %h.%d %i! The following string will be sent in attribute 32 (NAS-Identifier)."cisco router.nlab.cisco.com 10.0.1.67"radius-server attribute 55 access-request include
To send RADIUS attribute 55 Event-Timestamp in Access-Request, use the radius-server attribute 55 access-request include global configuration command. To disable sending this attribute, use the no form of this command.
radius-server attribute 55 access-request include
no radius-server attribute 55 access-request include
Syntax Description
There are no keywords or arguments.
Defaults
There are no default values.
Command Modes
Global configuration.
Command History
Usage Guidelines
Here are additional attribute options that are available to configure:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Examples
The following example illustrates how to configure the radius-server attribute 55 access-request include command:
router (config)# radius-server attribute 55 access-request includeradius-server host
To specify a RADIUS server host, use the radius-server host command in global configuration mode. To delete the specified RADIUS host, use the no form of this command.
radius-server host {hostname | ip-address} [auth-port port-number] [acct-port port-number] [timeout seconds] [retransmit retries] [key string] [alias {hostname | ip-address}]
no radius-server host {hostname | ip-address} [auth-port port-number] [acct-port port-number] [timeout seconds] [retransmit retries] [key string] [alias {hostname | ip-address}]
Syntax Description
Defaults
The auth-port port number defaults to 1645; the acct-port port number defaults to 1646.
Command Modes
Global configuration
Command History
Examples
The following example shows the radius-server host command:
Router# radius server host 20.1.1.1radius-server snmp-trap
To generate a trap (SNMP notification) when round trip time or retransmit value goes above the high threshold value and comes below the normal threshold value, use the radius-server snmp-trap global configuration command. The trap is generated for either round trip time or retransmit count. Use the no form of the command to disable this feature.
radius server snmp [retrans-threshold normal high | timeout-threshold normal high]
no radius server snmp [retrans-threshold normal high | timeout-threshold normal high]
Syntax Description
Defaults
This command is disabled by default.
Command Modes
Global configuration.
Command History
Examples
Here is example output for the radius server snmp command:
router(config)#radius-server snmp-trap timeout-threshold 50 80router(config)#radius-server snmp-trap retrans-threshold 50 80radius-server vsa send accounting wimax
To configure the WiMAX VSAs included in RADIUS accounting messages generated by the HA, use the radius-server vsa send accounting wimax command in global configuration mode. Use the no form of the command to disable this feature.
radius-server vsa send accounting wimax
no radius-server vsa send accounting wimax
Syntax Description
There are no keywords or arguments for this command.
Defaults
There are no default values.
Command Modes
Global configuration
Command History
Usage Guidelines
When this command is enabled, the following following RADIUS attributes will be included in accounting messages generated by the HA.
•
•
•
•
•
•
•
•
Examples
The following example shows the radius-server vsa send accounting wimax command:
Router# radius-server vsa send accounting wimaxradius-server vsa send authentication wimax
To configure WiMAX VSAs included in RADIUS Access-Request messages, use the radius-server vsa send authentication wimax command in global configuration mode. Use the no form of the command to disable this feature.
radius-server vsa send authentication wimax
no radius-server vsa send authentication wimax
Syntax Description
There are no keywords or arguments for this command.
Defaults
There are no default values.
Command Modes
Global configuration
Command History
Usage Guidelines
When this command is enabled, the following following RADIUS attributes will be included in Access-Request messages generated by the HA.
•
•
•
•
•
•
•
•
Examples
The following example shows the radius-server vsa send authentication wimax command:
Router# radius-server vsa send authentication wimaxrealm case-insensitive
To enable the Realm Case-Insensitive feature, use the realm case-insensitive command in Mobile IP configuration mode. To disable the feature, use the no form of this command.
realm case-insensitive
no realm case-insensitive
Syntax Description
This command has no arguments or keywords.
Command Default
The Realm Case-Insensitive feature is not enabled.
Command Modes
Mobile IP configuration
Command History
Usage Guidelines
The Realm Case-Insensitive feature enables you to match the configured commands against registration request (RRQ) Network Access Identifiers (NAIs) with case-insensitive realm parameters. However, the username is still considered to be case-sensitive.
Examples
The following example shows how to enable the Realm Case-Insensitive feature:
HA(config)# ip mobile optionsHA(config-ipmobile-options)# realm case-insensitiveRelated Commands
redirect ip access-group
To specify that IP be the redirected profile-based configuration, use the redirect ip access-group command in hotline-rules sub-command configuration mode. Use the no form of the command to disable this feature.
redirect ip access-group { acl-no | word } {in | out} {redirect ip-addr [port]}
no redirect ip access-group { acl-no | word } {in | out} {redirect ip-addr [port]}
Syntax Description
Defaults
There are no default values.
Command Modes
Global configuration
Command History
Usage Guidelines
The configured ACL should be an extended acl. ACL numbers range from 100-199 & 2000-2699.
There can be multiple redirect rules configured under one profile-id with ACLs, redirect-ip-address and redirect-port.
Examples
The following example illustrates the redirect ip access-group command:
router(non-hotline-rules)#redirect ip access-group 100 in redirect 20.20.20.20 1redundancy ip address
To assign an IP address to the physical interface used for external routing of packets so that the active and standby have the correct address, use the redundancy ip address per-interface command. Use the no version of the command to disable the config-sync feature.
redundancy ip address {unit1 ip1 mask1 unit2 ip2 mask2 }
no redundancy ip address {unit1 ip1 mask1 unit2 ip2 mask2 }
Syntax Description
Defaults
The command is not configured by default.
Command Modes
Interface and sub-interface mode.
Command History
Usage Guidelines
This command is a per-interface command. The HSRP protocol uses the IP address configured for its negotiation, and not the one configured using the regular ip address command. The ip address configuration is not required for a sub-interface that is dedicated for HSRP negotiation with the peer.
No configuration commands are allowed on the secondary. Only the primary is configurable and will drive the secondary.
When configuring the Home Agent sync feature for the first time, you should only bring up one of the redundant units, make the necessary configuration, and save it before getting the other unit up. This is to avoid having to make configurations on the standby unit for the first time.
Examples
Here is an example of the redundancy ip address command:
Router(int)#redundancy ip address unit1redundancy periodic-sync
To control the periodic sync of binding statistics and remaining idle time for the bindings in a redundancy setup (between the active and standby), use the redundancy periodic-sync global configuration command. Use the no form of the command to set the interval to the default value of 5 minutes.
redundancy periodic-sync interval minutes [limit cpu percentage cpu threshold [rate rate#]]
no redundancy periodic-sync inverval minutes [limit cpu percentage cpu threshold [rate rate#]]
Syntax Description
Defaults
The default interval value is 5 minutes. The default limit cpu percentage cpu threshold is 70%. The no version of the command resets the value to the 5 minute default value.
Command Modes
Global configuration
Command History
Usage Guidelines
The following per-session fields will be periodically synchronized to the standby Home Agent.
•
•
•
•
•
•
•
•
•
The objective of this command is to spread the sync messages over a period of time and uniformly distribute the load over time. It is possible that the rate specified cannot be met because the CPU load or memory thresholds are exceeded.
We suggest that you choose an interval that matches well with the max bindings in order to be able to achieve the default sync rate. So, choosing a 1 minute interval for 500K bindings will not be honored in the calculated rate (the required rate is 8500/sec, but the maximum rate is 5000/s) unless a rate is also specified in the CLI.
The update interval is configurable in minutes, and is independent of the configuration for the sending of interim accounting update Radius messages.
The information is only sent to the standby if there has been a change in value for any of the Input/Output counts.
The configured periodic sync interval is displayed in the output of the show running command if it is not the default interval time of 5 minutes.
The current periodic sync interval value is displayed in the show redundancy inter-device command. The output is updated to show the periodic sync interval, CPU limit and next sync iteration start time.
Use the debug ip mobile redundancy events and debug ip mobile redundancy detail commands to troubleshoot this feature.
Use debug redundancy periodic-sync command to enable or disable the throttling and periodic sync messages.
Examples
Here is an example of the redundancy periodic-sync command:
Router(config)#redundancy periodic-sync interval 3Router(config)#endredundancy unit1
To identify and configure the peer slot in the same chassis, use the redundancy unit1 global configuration command. Use the no form of the command to disable this function.
redundancy unit1 slot x unit2 slot y
no redundancy unit1 slot x unit2 slot y
Syntax Description
unit1 slot x
Identifies the chassis and the address to configure the peer.
unit2 slot y
Identifies the unit2's address.
Defaults
The command is disabled by default.
Command Modes
Global configuration
Command History
Examples
The following examples illustrate the redundancy unit1 command and provide additional configuration details:
ipc zone defaultassociation <no>protocol sctpunit1-port <port1>unit1-ip <ip1>unit2-port <port2>unit2-ip <ip2>.....interface GigabitEthernet0/0.88encapsulation dot1Q 88redundancy ip address unit1 88.105.128.2 255.255.255.0 unit2 88.105.128.100 255.255.255.0=================Followings are for HA inter-chassis corresponding's CLIs:=====================ipc zone defaultassociation 1no shutdownprotocol sctplocal-port 5000local-ip 88.105.129.2remote-port 5000remote-ip 88.105.129.5.....interface GigabitEthernet0/0.88encapsulation dot1Q 88ip address 88.105.128.2 255.255.255.0router mobile
To enable Mobile IP on the router, use the router mobile global configuration command. To disable Mobile IP, use the no form of this command.
router mobile
no router mobile
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes
Global configuration.
Command History
Usage Guidelines
This command must be used in order to run Mobile IP on the router, as either a Home Agent or a Foreign Agent. The process is started and counters begin. Disabling
Mobile IP will remove all related configuration commands, both global and interface.
Examples
The following example enables Mobile IP:
Router# router mobile
show ccm
To display information regarding various aspects of the Cluster Component Manager (CCM), use the show ccm EXEC command. Use the no form to disable the output.
show ccm [ clients | queues | sessions ]
no show ccm [ clients | queues | sessions ]
Syntax Description
clients
(Optional) Displays information related to each of the clients.
queues
(Optional) Displays Event Manager Request Queues
sessions
(Optional) Displays information related to CCM sessions.
Command Modes
EXEC
Command History
Examples
The following is sample output from the show ccm command:
Router#show ccm clientsCCM bundles sent since peer up:Sync Session 0Update Session 0Active Bulk Sync 0Session Down 0Standby Bulk Syn 0Client events sent since peer up:ipmobile ccm 0router#show ccm querouter#show ccm queues5 Event Queuessize max kicks starts false suspends ticks(ms)4 CCM 0 1 1 2 1 0 20Event NamesEvents Queued MaxQueued Suspends usec/evt max/evt0 UNREGISTERED1 4 Sync Session 0 0 0 0 0 02 4 Sync Client 0 0 0 0 0 03 4 Update 0 0 0 0 0 04 4 Session Down 0 0 0 0 0 05 4 Bulk Sync Begi 0 0 0 0 0 06 4 Bulk Sync Cont 0 0 0 0 0 07 4 Bulk Sync End 0 0 0 0 0 08 4 Dynamic Sync C 0 0 0 0 0 09 4 Going Active 1 0 1 0 62 6210 4 Going Standby 0 0 0 0 0 011 4 Standby Presen 0 0 0 0 0 012 4 Standby Gone 0 0 0 0 0 013 UNREGISTERED14 4 RF Message 0 0 0 0 0 015 4 CP Message 0 0 0 0 0 016 4 Recr Session 0 0 0 0 0 017 4 Recr Update 0 0 0 0 0 018 4 Recr Sess Down 0 0 0 0 0 0router#show ccm sessionsGlobal CCM state: CCM HA Active - CollectingNumber of sessions in state Error: 0Number of sessions in state Not Ready: 0Number of sessions in state Ready: 0Number of sessions in state Dyn Sync: 0show ip access-lists
To display the contents of all current IP access lists, use the show ip access-lists command in privileged EXEC mode.
show ip access-lists [access-list-number | name]
Syntax Description
access-list-number
(Optional) Number of the IP access list to display.
name
(Optional) Name of the IP access list to display.
Defaults
All standard and extended IP access lists are displayed by default.
Command Modes
Privileged EXEC (#)
Command History
Usage Guidelines
The show ip access-lists command provides output identical to the show access-lists command, except that it is IP-specific and allows you to specify a particular access list.
Examples
This example shows how to display the configuration contents of all current IP access lists:
Active-HA#sh ip access-listsExtended IP access list 10010 permit ip 60.0.2.0 0.0.0.255 5.1.1.0 0.0.0.25520 deny ip any anyExtended IP access list 15010 permit ip 5.1.1.0 0.0.0.255 60.0.2.0 0.0.0.25520 deny ip any anyExtended IP access list bangaloreExtended IP access list ciscoExtended IP access list mn-network10 permit ip host 60.0.2.1 host 100.100.200.10020 permit ip 60.0.2.0 0.0.0.255 host 100.100.200.030 permit ip host 60.0.2.1 host 100.100.200.9040 permit ip 60.0.2.0 0.0.0.255 100.100.200.0 0.0.0.255Extended IP access list network-mn10 permit ip 5.1.1.0 0.0.0.255 host 60.0.2.120 deny ip 7.1.1.0 0.0.0.255 60.0.2.0 0.0.0.25530 permit ip 100.100.200.0 0.0.0.255 60.0.2.0 0.0.0.255Extended IP access list tunnel_in_acl10 permit ip any anyExtended IP access list tunnel_out_acl10 permit ip any anyActive-HA#show ip mobile binding
To display the mobility binding table, use the show ip mobile binding EXEC command.
show ip mobile binding [ip address | acl | care-of-address | home-agent address | idle-time | lifetime | nai string | realm string | summary | all | vrf | police @example.com | mac address| non-hotline profile name | absolute-time value]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The Home Agent updates the mobility binding table in response to registration events from mobile nodes. If the address argument is specified, bindings are shown for only that mobile node.
Examples
The following is sample output from the show ip mobile binding command:
Router# show ip mobile bindingMobility Binding List:Total 1Total VPDN Tunnel'ed 1mip-lac-user1@ispxyz.com (Bindings 1):Home Addr 30.0.0.5Care-of Addr 7.0.0.1, Src Addr 7.0.0.1Lifetime granted 00:30:00 (1800), remaining 00:28:56Flags sBdmg-T-, Identification CA932143.10000Tunnel0 src 7.0.0.2 dest 7.0.0.1 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelService Options:VPDN Tunnel (setup-time 90 secs)Revocation negotiated - I-bit setIf the DNS server configs configured locally are used then the show output will include the following:
router# show ip mobile bindingMobility Binding List:Total 1mwts-mip-r20sit-haslb@ispxyz20.com (Bindings 1):Home Addr 40.0.0.2Care-of Addr 20.20.210.10, Src Addr 20.20.210.10Lifetime granted 00:03:00 (180), remaining 00:02:32Flags sBdmg-T-, Identification C6ACD1D7.10000Tunnel0 src 20.20.202.102 dest 20.20.210.10 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelService Options:Dynamic HA assignmentRevocation negotiated - I-bit setAcct-Session-Id: 23Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesDNS Address primary 10.77.155.10 secondary 5.5.5.5DNS Address Assignment enabled with entity Configured at Homeagent(3)If the DNS server addresses downloaded using a DNS server VSA from HAAA, then the show output will include the following:
router# show ip mobile bindingMobility Binding List:Total 1mwts-mip-r20sit-haslb@ispxyz30.com (Bindings 1):Home Addr 40.0.0.3Care-of Addr 20.20.210.10, Src Addr 20.20.210.10Lifetime granted 00:03:00 (180), remaining 00:02:05Flags sBdmg-T-, Identification C6ACD910.10000Tunnel0 src 20.20.202.102 dest 20.20.210.10 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelService Options:Dynamic HA assignmentRevocation negotiated - I-bit setAcct-Session-Id: 31Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesDNS Address primary 10.77.155.10 secondary 10.77.155.9DNS Address Assignment enabled with entity From Home AAA(1)
Note
ACLs Applied to a Mobility Binding and Accounting Session ID and Accounting Counters
router# show ip mobile binding 44.0.0.1Mobility Binding List:44.0.0.1:Care-of Addr 55.0.0.11, Src Addr 55.0.0.11Lifetime granted 00:01:30 (90), remaining 00:00:51Flags sbDmg-T-, Identification C661D5A0.4188908Tunnel1 src 46.0.0.3 dest 55.0.0.11 reverse-allowedTunnel1 Input ACL: inaclnameTunnel1 Output ACL: outaclname - Empty list or not configured.MR Tunnel1 src 46.0.0.3 dest 55.0.0.11 reverse-allowedRouting Options - (D)Direct-to-MN (T)Reverse-tunnelMobile Networks: 111.0.0.0/255.0.0.0 (S)Acct-Session-Id: 0Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesrouter# show ip mobile tunnelMobile Tunnels:Total mobile ip tunnels 1Tunnel0:src 46.0.0.3, dest 55.0.0.11encap IP/IP, mode reverse-allowed, tunnel-users 1Input ACL users 1, Output ACL users 1IP MTU 1480 bytesPath MTU Discovery, mtu: 0, ager: 10 mins, expires: neveroutbound interface Ethernet1/0HA created, fast switching enabled, ICMP unreachable enabled5 minute input rate 0 bits/sec, 0 packets/sec5 minute output rate 0 bits/sec, 0 packets/sec0 packets input, 0 bytes, 0 drops0 packets output, 0 bytesHere is an example of the show ip mobile binding police nai command:
Router#show ip mobile binding police nai <@example.com>Mobility Binding List:user1@cisco.com (Bindings 1):DOWNLINK POLICING STATISTICSpolice:rate 8000 , bc 1400 bytespeak-rate 8000, be 1700 bytesconformed 1 packets, 204 bytes; actions:transmitexceeded 0 packets, 0 bytes; actions:transmitviolated 0 packets, 0 bytes; actions:dropIn Release 5.0, the per-subscriber show output includes the access type and binding overwrite information.
router#show ip mob bind allMobility Binding List:Total 2Total VPDN Tunnel'ed 0cisco-1@cisco.com (Bindings 1):Home Addr 65.1.0.1Care-of Addr 4.0.11.15, Src Addr 4.0.11.15Lifetime granted 00:03:20 (200), remaining 00:02:17Idle timer disabledFlags sBdmg-T-, Identification C11AAFFF.1Tunnel0 src 4.0.11.16 dest 4.0.11.15 reverse-allowedRouting Options - (T)Reverse-tunnelAccess-Type: WiMAX (802.16e)Acct-Session-Id: 0x00000008Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRadius Disconnect Enabledcisco mip2@term-cause.com (Bindings 1):Home Addr 65.1.0.2Care-of Addr 4.0.11.15, Src Addr 4.0.11.15Lifetime granted 00:15:00 (900), remaining 00:14:54Idle timer disabledFlags sBdmg-T-, Identification C11AB039.2Tunnel1 src 4.0.11.16 dest 4.0.11.15 reverse-allowedRouting Options - (T)Reverse-tunnelService Options:NAT detectAccess-Type: 3GPP2 (3GPP2 1xRTT/HRPD)Acct-Session-Id: 0x00000009Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRadius Disconnect EnabledShow IP Mobile Binding with MAC Address Example
cisco-1@cisco.com (Bindings 1):MAC Addr 0000.0001.0000Home Addr 5.1.0.1Care-of Addr 2.2.2.200, Src Addr 2.2.2.200Lifetime granted 10:00:00 (36000), remaining 09:52:39Flags sBdmg-T-, Identification CCA7F408.1Tunnel0 src 81.81.81.81 dest 2.2.2.200 reverse-allowedRouting Options - (T)Reverse-tunnelAccess-tech Type: 3GPP2 (3GPP2 1xRTT/HRPD)Revocation negotiated - I-bit not setAccess Tech-Type Example
router#sh ip mobile bindingMobility Binding List:Total 1Total VPDN Tunnel'ed 0cisco_user1@cisco.com (Bindings 1):Home Addr 1.1.1.10Care-of Addr 10.109.1.2, Src Addr 10.109.1.2Lifetime granted 00:08:20 (500), remaining 00:07:45Flags sBDmg-T-, Identification CC8CE445.1Tunnel0 src 86.6.6.6 dest 10.109.1.2 reverse-allowedRouting Options - (D)Direct-to-MN (T)Reverse-tunnelAccess-tech Type: WiMAX (802.16e)Acct-Session-Id: 0x00000000Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesTraffic Plane Id:5Displays the user hotline status:
Active-HA#sh ip mob bindingMobility Binding List:Total 1wimax-mip1@wimax.com (Bindings 1):Home Addr 60.0.2.1Care-of Addr 4.0.11.22, Src Addr 4.0.11.22Lifetime granted 05:33:20 (20000), remaining 04:01:06Flags sBdmg-T-, Identification C23C36EF.00000001Tunnel0 src 80.0.11.20 dest 4.0.11.22 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelAccess-tech Type: WiMAX(802.16e)Revocation negotiated - I-bit setAcct-Session-Id: 0x00000001Sent on tunnel to MN: 311 packets, 31100 bytesReceived on reverse tunnel from MN: 316 packets, 31600 bytesHotline status ActiveRadius Disconnect EnabledTraffic Plane Id:7In Cisco HA Release 5.1 the new sample output is as follows:
For 3GPP2 binding, the output will be as follows:
# show ip mobile bindingMobility Binding List:Total 1derath5@cisco.com (Bindings 1):Home Addr 65.0.0.2Care-of Addr 50.1.1.92, Src Addr 50.1.1.92Lifetime granted 02:00:00 (7200), remaining 01:59:52Flags sBdmg-T-, Identification CD735149.00000005Tunnel0 src 14.0.0.2 dest 50.1.1.92 reverse-allowedTunnel0 Output ACL: p1_test - ACL is empty or not configuredRouting Options - (B)Broadcast (T)Reverse-tunnelAccess-tech Type: 3GPP2 (3GPP2 1xRTT/HRPD)Acct-Session-Id: 0x00000002Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRadius Disconnect EnabledAbsolute session time granted 00:01:00 (60), remaining 00:00:52Traffic Plane Id:6For WiMAX binding, the output will be as follows:
HA-Slot3#show ip mobile bindingMobility Binding List:Total 1sony6@cisco.com (Bindings 1):Home Addr 65.0.0.3Care-of Addr 50.1.1.90, Src Addr 50.1.1.90Lifetime granted 02:00:00 (7200), remaining 01:59:07Flags sBdmg-T-, Identification CD7352EA.00000006Tunnel0 src 14.0.0.2 dest 50.1.1.90 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelAccess-tech Type: WiMAX(802.16e)Acct-Session-Id: 0x00000004Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRadius Disconnect EnabledAbsolute session time granted 00:02:00 (120), remaining 00:01:07Traffic Plane Id:5Incase of both hotline timer and absolute timer are present for the binding, the output will be:
HA-Slot3#show ip mobile bindingMobility Binding List:Total 1derath5@cisco.com (Bindings 1):Home Addr 65.0.0.2Care-of Addr 50.1.1.92, Src Addr 50.1.1.92Lifetime granted 02:00:00 (7200), remaining 01:59:49Flags sBdmg-T-, Identification CD7358E6.00000005Tunnel1 src 14.0.0.2 dest 50.1.1.92 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelAccess-tech Type: 3GPP2 (3GPP2 1xRTT/HRPD)Acct-Session-Id: 0x00000009Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesHotline status ActiveHotline session granted 00:01:00 (60), remaining 00:00:49Radius Disconnect EnabledAbsolute session time granted 00:01:00 (60), remaining 00:00:49Traffic Plane Id:6This output displays 3gpp2 and Wimax bindings.
router#show ip mobile binding summaryMobility Binding List:Total 2621403ggp2 Bindings 0Wimax Bindings 262140This example displays the CLID in the output:
HA-Active#sh ip mob bindingMobility Binding List:Total 2000000100000062 (Bindings 1):Home Addr 8.0.0.1Care-of Addr 2.1.1.1, Src Addr 2.1.1.1Lifetime granted 00:30:00 (1800), remaining 00:29:28Flags sbdmG-T-, Identification CE2BE4CE.00020000Tunnel0 src 2.1.1.2 dest 2.1.1.1 reverse-allowedRouting Options - (G)GRE (T)Reverse-tunnelAccess-tech Type: 3GPP2 (3GPP2 1xRTT/HRPD)Acct-Session-Id: 0x00000000Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRadius Disconnect EnabledCalling Station Id 000000100000062NAI mipuser1@ispxyz.comTable 9 describes the significant fields shown in the display.
show ip mobile binding vrf
To display all the bindings on the HA that are VRF-enabled, use the show ip mobile binding vrf EXEC command.
show ip mobile binding vrf [summary]
Syntax Description
Command Modes
EXEC
Command History
Usage Guidelines
This command does not show those bindings that are in default routing table.
Examples
The following is sample output from the show ip mobile binding vrf command:
Router#show ip mobile binding vrfMobility Binding List:Total number of VRF bindings is 1mwts-mip-r20sit-haslb1@ispxyz1.com (Bindings 1):Home Addr 50.0.0.2Care-of Addr 20.20.210.10, Src Addr 20.20.210.10Lifetime granted 00:05:00 (300), remaining 00:03:02Flags sBdmg-T-, Identification C6DEF608.10000Tunnel0 src 20.20.204.2 dest 20.20.210.10 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelService Options:Dynamic HA assignmentRevocation negotiated - I-bit setVRF ispxyz-vrf1Acct-Session-Id: 11Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRadius Disconnect EnabledDNS Address primary 10.77.155.10 secondary 1.1.1.1DNS Address Assignment enabled with entity Configured at Homeagent(3)Dynamic DNS update to server enabledThe following is sample output from the show ip mobile binding vrf summary command:
router# show ip mobile binding vrf summaryMobility Binding List:Total number of VRF bindings is 1If the VRF name downloaded from the HAAA and what is configured locally matches , then the show ip mobile binding realm command will display the ouput below:
router# show ip mobile binding vrf realm @ispxyz1.comMobility Binding List:Total bindings for realm @ispxyz1.com under VRF ispxyz-vrf1 is 1mwts-mip-r20sit-haslb1@ispxyz1.com (Bindings 1):Home Addr 50.0.0.2Care-of Addr 20.20.210.10, Src Addr 20.20.210.10Lifetime granted 00:05:00 (300), remaining 00:03:59Flags sBdmg-T-, Identification C6DF047C.10000Tunnel0 src 20.20.204.2 dest 20.20.210.10 reverse-allowedRouting Options - (B)Broadcast (T)Reverse-tunnelService Options:Dynamic HA assignmentRevocation negotiated - I-bit setVRF ispxyz-vrf1Acct-Session-Id: 17Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesRadius Disconnect EnabledDNS Address primary 10.77.155.10 secondary 1.1.1.1DNS Address Assignment enabled with entity Configured at Homeagent(3)Dynamic DNS update to server enabledIf VRF is not configured locally, then the show output will be as below:
router# show ip mobile binding vrf realm @ispxyz1.com summaryMobility Binding List:%VRF is not enabled locally for realm @ispxyz1.comshow ip mobile binding vrf realm
To display all bindings for the realm that are VRF-enabled, use the show ip mobile binding vrf realm EXEC command.
show ip mobile binding vrf realm realm-name [summary]
Syntax Description
Command Modes
EXEC
Command History
Examples
The following is sample output from the show ip mobile binding vrf realm command:
Router#show ip mobile binding vrf realm @cisco.comMobility Binding List:Total bindings for realm @cisco.com under VRF moip-vrf is 1cisco-moip1@cisco.com (Bindings 1):Home Addr 5.5.5.5Care-of Addr 92.92.92.1, Src Addr 92.92.92.1Lifetime granted 00:25:00 (1500), remaining 00:11:05Flags sbdmg-T-, Identification C3BC05F8.10000Tunnel0 src 192.168.11.1 dest 92.92.92.1 reverse-allowedRouting Options - (T)Reverse-tunnelVRF moip-vrf (id=1)show ip mobile globals
To display global information for Mobile Agents, use the show ip mobile globals EXEC command.
show ip mobile globals
Syntax Description
This command has no arguments or keywords.
Command Modes
EXEC
Command History
12.0(1)T
This command was introduced.
12.3(7)XJ
Radius Disconnect and MIP Revocation statistics were added.
Usage Guidelines
This command shows which services are provided by the Home Agent and/or Foreign Agent. Note the deviation from RFC 2006; the Foreign Agent will not display busy or registration required information. Both are handled on a per interface basis (see the show ip mobile interface command), not at the global Foreign Agent level.
Examples
The following is sample output from the show ip mobile globals command when both Radius Disconnect and MIP Revocation are enabled on HA:
Router# show ip mobile globalsIP Mobility global information:Home AgentRegistration lifetime: 10:00:00 (36000 secs)Broadcast enabledReplay protection time: 7 secsReverse tunnel enabledICMP Unreachable enabledStrip realm disabledNAT Traversal disabledHA Accounting enabled using method list: mylistNAT UDP Tunneling support enabledUDP Tunnel Keepalive 600Forced UDP Tunneling disabledAddress 7.0.0.2 -------->>>>>> Redundant HA informationStandby groupsciscoVirtual networks40.0.0.0 /8Foreign Agent is not enabled, no care-of address0 interfaces providing serviceEncapsulations supported: IPIP and GRETunnel fast switching enabled, cef switching enabledTunnel path MTU discovery aged out after 10 minRadius Disconnect Capability disabledMulti-path for Mobile Router disabledMaximum Bindings: 235000The following is the complete output with fields added in HA 5.1
router#show ip mob globalsIP Mobility global information:Home AgentRegistration lifetime: 10:00:00 (36000 secs)Broadcast disabledReplay protection time: 255 secsReverse tunnel enabledICMP Unreachable enabledStrip realm disabledNAT Traversal disabledNAT enabled for ipredirect packets <------Added as part of NAT feature of IP redirect in HA 5.1HA Accounting enabled using method list: defaultNAT UDP Tunneling support enabledUDP Tunnel Keepalive 100Forced UDP Tunneling disabledMulti-path for Mobile Router disabledMaximum Bindings: 2350003GPP2 Access-type: <----------------Added in HA 5.1Access Request is not suppressed <-----Added as part of "Local Authentication for 3GPP2" in HA 5.1MHAE is not Optional <-----------Added as part of "3GPP2 RRQ without MHAE"Foreign Agent is not enabled, no care-of address1 interface providing serviceEncapsulations supported: IPIP and GRETunnel cef switching enabledTunnel path MTU discovery aged out after 10 minRegistration Revocation enabled - I bit negotiation setRadius Disconnect Capability disabledMobile IP Debug Include Username EnabledTable 10 describes the significant fields shown in the display.
show ip mobile home-agent congestion
To display various aspects of the congestion state of the Home Agent, use the show ip mobile home-agent congestion EXEC command.
show ip mobile home-agent congestion
Syntax Description
There are no keywords or arguments for this command.
Command Modes
EXEC
Command History
Usage Guidelines
The output of the commned displays the following:
•
•
•
Examples
Here is example output for the show ip mobile home-agent congestion command:
Router SLOT4#show ip mobile home-agent congestionHome Agent congestion information :Current congestion level: CongestedConfigured Action : RejectConfigured threshold : 10Current DFP value = 7show ip mobile host
To display mobile node information, use the show ip mobile host EXEC command.
show ip mobile host [address | interface interface | network address | nai string | group | summary]
Syntax Description
Command Modes
EXEC
Command History
Usage Guidelines
Note
Examples
The following is sample output from the show ip mobile host command:
Router# show ip mobile hostMobile Host List:Total 5mwts-mip-r20sit-haslb@ispxyz.com:Dynamic address from AAA pool mobilenodesAllowed lifetime 00:10:00 (600)Roam status -Registered-, Home link on virtual network 40.0.0.0 /8Bindings40.0.0.2Accepted 0, Last time -never-Overall service time 00:00:39Denied 0, Last time -never-Last code '-never- (0)'Total violations 0Acct-Session-Id: 43Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesInput ACL: mipinaclOutput ACL: mipoutaclmwts-pmp-r20sit-base-user1@ispxyz.com:Dynamic address from local pool mobilenodesAllowed lifetime 00:08:20 (500)Roam status -Unregistered-, Home link on virtual network 40.0.0.0 /8router#The following sample output from the show ip mobile host command displays CUI and AAA-session-id:MWTBHA13-SUP-10-3#sh ip mobile hostMobile Host List:Total 1cisco_user_wimax_1@cisco.com:Dynamic address from local pool cisco_poolStatic authorization using pool local cisco_poolAllowed lifetime INFINITE/default)Roam status -Registered-, Home link on interface Null0Bindings1.1.1.1Accepted 1, Last time 01/08/03 23:31:57Overall service time 00:00:33Denied 0, Last time -never-Last code '-never- (0)'Total violations 0CUI: abcdef123456AAA-Session-ID: aaa_session_id:1Class:HA-R5.0-EFTAcct-Session-Id: 0x00000002Sent on tunnel to MN: 0 packets, 0 bytesReceived on reverse tunnel from MN: 0 packets, 0 bytesMWTBHA13-SUP-10-3#Table 11 describes the significant fields shown in the display.
The following is sample output from the show ip mobile host group command for groups configured with the ip mobile host command:
Router# show ip mobile host groupmwtr-pmp-user1Dynamic address from AAA serverDynamic address from local pool mobilenodesStatic address authorization by AAA serverStatic address authorization using local pool mobilenodesHome link on virtual network 30.0.0.0 /8, Care-of ACL -none-Security associations on AAA server, stored remotelyAllowed lifetime (INFINITE)Table 12 describes the significant fields shown in the display.
Related Commands
show ip mobile binding
Displays the mobility binding table.
clear ip mobile host-counters
Clears the mobile station-specific counters.
show ip mobile hotline
To display a list of hotline profiles or a particular hotline profile, use the show ip mobile hot-line EXEC command.
show ip mobile hotline {profile [profile-id] | summary | users [nai id] }
Syntax Description
Defaults
There are no default values.
Command Modes
Privileged EXEC
Command History
Examples
The following example illustrates the show ip mobile hotline command:
show ip mobile hotline users ?nai MN identified by NAI| Output modifiers<cr>The following is the sample output.
HA#show ip mobile hotline users nai mip1@cisco.comblrmip1@cisco.com (Bindings 1):Rule Based HotLining (Rules 1)RuleType HTTPPRedir, Dynamic ACL Number 10Direction - inRedirect url - www.cisco.comHA#show ip mobile hotline usersHotline Binding List:blrmip1@cisco.com (Bindings 1):Rule Based HotLining (Rules 1)RuleType HTTPPRedir, Dynamic ACL Number 10Direction - inRedirect url - www.cisco.comblrmip2@cisco.com (Bindings 1):Rule Based HotLining (Rules 1)RuleType HTTPPRedir, Dynamic ACL Number 10Direction - inRedirect url - www.cisco.comThis command displays the list of hotline profiles or a particular hotline profile.
show ip mobile hotline profile ?WORD Profile-Id| Output modifiers<cr>The following is sample output:
HA#Show ip mobile hotline profile ciscoHotline Profile List:Profile: cisco (Rules 1)RuleType HTTPRedir, Extended ACL Number 100Direction - inRedirected Url - cisco.comHA#show ip mobile hotline profileHotline Profile List:Total 2Profile: cisco (Rules 1)RuleType HTTPRedir, Extended ACL Number 100Direction - inRedirected Url - cisco.comProfile: ht-prof1 (Rules 3)RuleType IPRedir, Extended ACL Name ht-acl1Direction - inRedirected IPAddr 16.1.1.102RuleType IPRedir, Extended ACL Number 100Direction - inRedirected IPAddr 1.1.1.1RuleType IPFilter, Extended ACL Name ciscoDirection - outHA#This command displays the current hotlining statictics.
show ip mobile hotline profile ?| Output modifiers<crHA#sh ip mob hot summaryHomeAgent Hotlining Summary:Number of Sessions Hotlined 2Number of Profile-Based Hotlined 0Number of Rule-Based Hotlined 2HA#Displays User Hotline information:
Active-HA#sh ip mobile hotline usersHotline Binding List:Total Sessions Hotlined 1wimax-mip1@wimax.com (Bindings 1):Profile Based HotLining (Rules 2)RuleType IPRedir, Extended ACL Name mn-networkDirection - inRedirected IPAddr 120.0.1.15RuleType IPFilter, Extended ACL Number 100Direction - inshow ip mobile hotline profile displays the configured profile information on the Home Agent:
Active-HA#sh ip mob hot profHotline Profile List:Total 2Profile: mn-network (Rules 2)RuleType IPRedir, Extended ACL Name mn-networkDirection - inRedirected IPAddr 120.0.1.15RuleType IPFilter, Extended ACL Number 100Direction - inProfile: network-mn (Rules 2)RuleType IPFilter, Extended ACL Name network-mnDirection - outRuleType IPFilter, Extended ACL Number 150Direction - outThis output displays profile based hotline sessions.
router#show ip mobile hot summaryHomeAgent Hotlining Summary:Number of Sessions Hotlined 262140Number of Profile-Based Hotlined 262140Number of Rule-Based Hotlined 0show ip mobile ipc
To display statistics related to CP-TP interactions, use the show ip mobile ipc EXEC command. Use the no form of the command to disable this function.
show ip mobile ipc
no show ip mobile ipc
Syntax Description
There are no keywords or arguments for this command.
Defaults
The command is disabled by default.
Command Modes
EXEC
Command History
Examples
Here is example output for the show ip mobile ipc command:
Router#show ip mobile ipcDistributed HA IPC Traffic:
Binding Updates received 0, sent 51 fail 0 timeout 0
Binding Update Ack received 51, sent 0 fail 0
Binding Delete Req received 0, sent 4 fail 0
Binding Interim Req received 0, sent 5 fail 0 timeout 0
Binding Interim Ack received 5, sent 0 fail 0
Binding Bulk Req received 0, sent 0 fail 0 timeout 0
Binding Bulk Ack received 0, sent 0 fail 0
show ip mobile option
To display OM metrics related statistics, use the show ip mobile option EXEC command.
show ip mobile option [ommetrics output-modifiers]
Syntax Description
ommetrics
Displays the OM metrics related statistics.
output- modifiers
Dislays the output modifiers.
Command Modes
EXEC
Command History
Examples
Here is example output for the show ip mobile option command:
router#show ip mobile optionsIP Mobility Options information:Realm (Domain) match is case insenstiverouter#show ip mobile options ommetricsOM Metric Statistics:Peak Active bindings in the elapsed (previous) interval 0Peak Active 3GPP2 binding in the elapsed (previous) interval 0Peak Active Wimax binding in the elapsed (previous) interval 0Elapsed configured interval size is 0 minutesshow ip mobile redundancy
To display the redundancy status of the Home Agent, use the show ip mobile redundancy EXEC command.
show ip mobile redundancy [statistics]
no show ip mobile redundancy [statistics]
Syntax Description
Command Modes
EXEC
Command History
Usage Guidelines
This command displays the redundancy status of the Home Agent. The RF status of the router and its peer status are displayed. Additionally, the number of bindings synced is displayed.
Examples
Here is example output for the show ip mobile redundancy command:
Router#show ip mob redundancyMobileIP Home Agent Session Redundancy system status: EnabledHome Agent state = ACTIVEHome Agent peer state = STANDBY HOTRouter#show ip mobile redundancy statisticsMobileIP Home Agent Session Redundancy statistics:Bulk sync successful 3 timesBinding sync creations, sent 1, received 2Binding sync updates, sent 3, received 3Binding sync deletes, sent 1, received 1Binding sync creation errors during, send 0, receive 0Binding sync update errors during, send 0, receive 3Binding sync delete errors during, send 0, receive 0show ip mobile secure
To display the mobility security associations for the mobile host, mobile visitor, Foreign Agent, Home Agent, or proxy Mobile IP host use the show ip mobile secure EXEC command.
show ip mobile secure {host | visitor | foreign-agent | home-agent [ha-rk] | proxy-host | summary} {ip-address | nai string}
Syntax Description
Command Modes
EXEC
Command History
Usage Guidelines
Multiple security associations can exist for each entity.
The proxy-host keyword is only available on PDSN platforms running specific PDSN code images; consult Feature Navigator for your Cisco IOS software release.
Examples
The following is sample output from the show ip mobile secure command:
Router# show ip mobile secure home-agentSecurity Associations (algorithm,mode,replay protection,key):20.0.0.6SPI 300, MD5, Prefix-suffix, Timestamp +/- 7,Key 00112233445566778899001122334455Table 13 describes the significant fields shown in the display.
The downloaded HA-RK key, SPI and lifetime can be displayed using the following command:
Router#show ip mobile secure home-agent ha-rk [ha-ip]HomeAgent HA-RK List:15.1.1.80:SPI 102, Lifetime 00:10:30 (630), Remaining 00:10:24Key 3132333435363738393031323334353637383930The generated FA-HA-Keys can be displayed using the following command:
Router#show ip mobile secure foreign-agent [fa-ip]e.g. Router#show ip mobile secure foreign-agentSecurity Associations (algorithm,mode,replay protection,key):14.1.1.28:(local SA)SPI 102, HMAC-MD5, Timestamp +/- 7, HA-IP 15.1.1.80Key b932c46406dcfe411f8bd147103ac53ca0c7fe65The above downloaded HA-RK and generated FA-HA-keys are deleted if HA-RK lifetime is expired or a new HA-RK key is downloaded for the same HA-IP.
In Release 5.1, the show ip mobile secure host command is modified to display whether the SA is downloaded from AAA, or configured locally. The new keywords introduced in HA 5.1 are highlighted below. For example,
Router#show ip mobile secure hostSecurity Associations (algorithm,mode,replay protection,key):@cisco.com:(local SA)SPI 106, MD5, Prefix-suffix, Timestamp +/- 7,Key 'sas06'sas1@yahoo.com:(AAA SA)SPI 130, MD5, Prefix-suffix, Timestamp +/- 11,Key 'sas30'Router#show ip mobile secure foreign-agentSecurity Associations (algorithm,mode,replay protection,key):14.1.1.28:(local SA)SPI 102, HMAC-MD5, Timestamp +/- 7, HA-IP 15.1.1.80Key b932c46406dcfe411f8bd147103ac53ca0c7fe65show ip mobile traffic
To display Home Agent protocol counters, and to incorporate cumulative counters for hot-lined sessions, use the show ip mobile traffic EXEC command.
show ip mobile traffic [since]
Syntax Description
This command has no arguments or keywords.
Command Modes
EXEC
Command History
Usage Guidelines
Counters can be reset to zero (0) using the clear ip mobile traffic command, which also allows you to undo the reset.
Examples
The following is sample output from the show ip mobile traffic command:
Router# show ip mobile trafficsh ip mob trafficIP Mobility traffic:Time since last cleared: 1d06hAdvertisements:Solicitations received 0Advertisements sent 0, response to solicitation 0Home Agent Registrations:Register requests rcvd 2, denied 0, ignored 0, dropped 0, replied 2Register requests accepted 2, No simultaneous bindings 0Register requests rcvd initial 1, re-register 0, de-register 1Register requests accepted initial 1, re-register 0, de-register 1Register requests replied 1, de-register 1Register requests denied initial 0, re-register 0, de-register 0Register requests ignored initial 0, re-register 0, de-register 0Registration Request Errors:Unspecified 0, Unknown HA 0, NAI check failures 0Administrative prohibited 0, No resource 0Authentication failed MN 0, FA 0, active HA 0Bad identification 0, Bad request form 0Unavailable encap 0, reverse tunnel 0Reverse tunnel mandatory 0Unrecognized VendorID or CVSE-Type in CVSE sent by MN to HA 0Unrecognized VendorID or CVSE-Type in CVSE sent by FA to HA 0Gratuitous 0, Proxy 0 ARPs sentRoute Optimization Binding Updates sent 0, acks received 0 neg acks received 0Registration Revocation msg sent 0 rcvd 0 ignored 0Registration Revocation acks sent 0 rcvd 0 ignored 0Total incoming registration requests using NAT detect 0RADIUS DISCONNECT:Disconnect Request rcvd 0, accepted 0Disconnect Request Errors:Unsupported Attribute 0, Missing Attribute 0Invalid Request 0, NAS Id Mismatch 0Session Cxt Not Found 0, Administratively Prohibited 0Change of Authorization:Request rcvd 0, accepted 0Request Errors:Unsupported Attribute 0, Missing Attribute 0Invalid Request 0, NAS Id Mismatch 0Session Cxt Not Found 0, Session Cxt Not Removable 0Unsupported Service 0Dynamic DNS Update (IP Reachability):Number of DDNS Update Add request sent 2Number of DDNS Update Delete request sent 2router#The following example displays hotlining counters:
HA# show ip mobile trafficIP Mobility traffic:Advertisements:Solicitations received 0Advertisements sent 0, response to solicitation 0Home Agent Registrations:Register requests rcvd 1351, denied 0, ignored 0, dropped 0, replied 1Register requests accepted 1351, No simultaneous bindings 0Register requests rcvd initial 149, re-register 1132, de-register 70Register requests accepted initial 149, re-register 113, de-register 7Register requests replied 1281, de-register 70Register requests denied initial 0, re-register 0, de-register 0Register requests ignored initial 0, re-register 0, de-register 0Registration Request Errors:Unspecified 0, Unknown HA 0, NAI check failures 0Administrative prohibited 0, No resource 0Authentication failed MN 0, FA 0, active HA 0Bad identification 0, Bad request form 0Unavailable encap 0, reverse tunnel 0Reverse tunnel mandatory 0Unrecognized VendorID or CVSE-Type in CVSE sent by MN to HA 0Unrecognized VendorID or CVSE-Type in CVSE sent by FA to HA 0Binding Updates received 14, sent 0 total 0 fail 1351Binding Update acks received 0 sent 14Binding info requests received 0, sent 1 total 2 fail 1Binding info reply received 1 drop 0, sent 0 total 0 fail 0Binding info reply acks received 0 drop 0, sent 1Binding Delete Req received 0, sent 0 total 0 fail 0Binding Delete acks received 0 sent 0Binding Sync Req received 0, sent 0 total 0 fail 0Binding Sync acks received 0 sent 0Gratuitous 0, Proxy 0 ARPs sentRoute Optimization Binding Updates sent 0, acks received 0 neg acks received 0Registration Revocation msg sent 0 rcvd 0 ignored 0Registration Revocation acks sent 0 rcvd 0 ignored 0Total incoming registration requests using NAT detect 0Total VPDN Tunnel sessions attempted: 1 success: 1 fail: 0 pending: 0PPP IDBS: 1 no resource: 0 deleted: 0Change of Authorization:Request rcvd 0, accepted 0Request Errors:Unsupported Attribute 0, Missing Attribute 0Invalid Request 0, NAS 0Session Cxt Not Found 0, Session Cxt Not Removable 0Unsupported Service 0Dynamic DNS Update (IP Reachability):Number of DDNS Update Add request sent 0Number of DDNS Update Delete request sent 0Home Agent Hotlining:Number of Hotline Sessions 6Number of Active-Session Hotlined 0Number of New-Session Hotlined 6Number of Active-Sessions Reconciled 0Number of New-Sessions Reconciled 0HA#In Release 5.0, the output includes number of RRQs received with invalid Access tech type extension.
Router#show ip mob trafficIP Mobility traffic:UDP:Port: 434 (Mobile IP) input drops: 0Advertisements:Solicitations received 0Advertisements sent 0, response to solicitation 0Home Agent Registrations:Register requests rcvd 0, denied 0, ignored 0, dropped 0, replied 0Register requests accepted 0, No simultaneous bindings 0Register requests rcvd initial 0, re-register 0, de-register 0Register requests accepted initial 0, re-register 0, de-register 0Register requests replied 0, de-register 0Register requests denied initial 0, re-register 0, de-register 0Register requests ignored initial 0, re-register 0, de-register 0Requests result in existing binding overwrite 0, Bindings overwritten 0Registration Request Errors:Unspecified 0, Unknown HA 0, NAI check failures 0Administrative prohibited 0, No resource 0Authentication failed MN 0, FA 0, active HA 0Bad identification 0, Bad request form 0Requests rejected due to congestion 0Requests aborted due to congestion 0Requests redirected due to congestion 0Bindings dropped due to congestion 0Idle bindings dropped 0Unavailable encap 0, reverse tunnel 0Reverse tunnel mandatory 0Unrecognized VendorID or CVSE-Type in CVSE sent by MN to HA 0Unrecognized VendorID or CVSE-Type in CVSE sent by FA to HA 0Unrecognized Access-tech type extn rcvd 0Binding Updates received 0, sent 0 total 0 fail 0Binding Update acks received 0 sent 0Binding info requests received 0, sent 0 total 0 fail 0Binding info reply received 0 drop 0, sent 0 total 0 fail 0Binding info reply acks received 0 drop 0, sent 0Binding Delete Req received 0, sent 0 total 0 fail 0Binding Delete acks received 0 sent 0Binding Sync Req received 0, sent 0 total 0 fail 0Binding Sync acks received 0 sent 0Gratuitous 0, Proxy 0 ARPs sentRoute Optimization Binding Updates sent 0, acks received 0 neg acks received 0Registration Revocation msg sent 0 rcvd 0 ignored 0Registration Revocation acks sent 0 rcvd 0 ignored 0Total incoming registration requests using NAT detect 0Total VPDN Tunnel sessions attempted: 0 success: 0 fail: 0 pending: 0PPP IDBs: 0 no resource: 0 deleted: 0Change of Authorization:Request rcvd 0, accepted 0Request Errors:Unsupported Attribute 0, Missing Attribute 0Invalid Request 0, NAS Id Mismatch 0Session Cxt Not Found 0, Session Cxt Not Removable 0Administratively Prohibited 0Unsupported Service 0Dynamic DNS Update (IP Reachability):Number of DDNS Update Add request sent 0Number of DDNS Update Delete request sent 0Home Agent Hotlining:Number of Hotline Sessions 0Number of Active-Session Hotlined 0Number of New-Session Hotlined 0Number of Active-Sessions Reconciled 0Number of New-Sessions Reconciled 0Here is an additional example for the HA Release 5.0:
Router#show ip mob trafficIP Mobility traffic:UDP:Port: 434 (Mobile IP) input drops: 0Advertisements:Solicitations received 0Advertisements sent 0, response to solicitation 0Home Agent Registrations:Register requests rcvd 1, denied 0, ignored 0, dropped 0, replied 1Register requests accepted 1, No simultaneous bindings 0Register requests rcvd initial 1, re-register 0, de-register 0Register requests accepted initial 1, re-register 0, de-register 0Register requests replied 284, de-register 0Register requests denied initial 60, re-register 0, de-register 0Register requests ignored initial 0, re-register 0, de-register 0Requests result in existing binding overwrite 0, Bindings overwritten 0Registration Request Errors:Unspecified 0, Unknown HA 0, NAI check failures 0Administrative prohibited 0, No resource 0Authentication failed MN 0, FA 0, active HA 0Requests rejected due to author fail 0Bad identification 0, Bad request form 0Requests rejected due to congestion 0Requests aborted due to congestion 0Requests redirected due to congestion 0Bindings dropped due to congestion 0Idle bindings dropped 2Unavailable encap 0, reverse tunnel 0Reverse tunnel mandatory 0Unrecognized VendorID or CVSE-Type in CVSE sent by MN to HA 0Unrecognized VendorID or CVSE-Type in CVSE sent by FA to HA 0Unrecognized Access-tech type extn rcvd 0Gratuitous 0, Proxy 0 ARPs sentRoute Optimization Binding Updates sent 0, acks received 0 neg acks received 0Registration Revocation msg sent 8 rcvd 0 ignored 0Registration Revocation acks sent 0 rcvd 0 ignored 0Total incoming registration requests using NAT detect 0Total VPDN Tunnel sessions attempted: 0 success: 0 fail: 0 pending: 0PPP IDBs: 0 no resource: 0 deleted: 0RADIUS DISCONNECT:Disconnect Request rcvd 0, accepted 0Disconnect Request Errors:Unsupported Attribute 0, Missing Attribute 0Invalid Request 0, NAS Id Mismatch 0Session Cxt Not Found 0, Administratively Prohibited 0Change of Authorization:Request rcvd 0, accepted 0Request Errors:Unsupported Attribute 0, Missing Attribute 0Invalid Request 0, NAS Id Mismatch 0Session Cxt Not Found 0, Session Cxt Not Removable 0Administratively Prohibited 0Unsupported Service 0Dynamic DNS Update (IP Reachability):Number of DDNS Update Add request sent 0Number of DDNS Update Delete request sent 0Home Agent Hotlining:Number of Hotline Sessions 0Number of Active-Session Hotlined 0Number of New-Session Hotlined 0Number of Active-Sessions Reconciled 0Number of New-Sessions Reconciled 0Router#
Note
Table 14 describes the significant fields shown in the display.
show ip mobile tunnel
To display information about the mobile IP tunnel, use the show ip mobile tunnel EXEC command.
show ip mobile tunnel [tunnel interface | brief | mip-udp aggregate-statistics | summary]
Syntax Description
Command Modes
EXEC
Command History
12.3(7)XJ
This command was introduced.
12.4(22)YD1
The summary, brief and mip-udp aggregate-statisitcs keywords were added.
Usage Guidelines
show ip mobile tunnel output is modified for MIP/UDP tunnels only. The two changes that are applicable to MIP/UDP tunnels are:
•
•
Note
Examples
The following is sample output from the show ip mobile tunnel command:
router#show ip mobile tunnelMobile Tunnels:Total mobile ip tunnels 2Tunnel0:src 14.0.0.2, dest 55.84.33.2encap GRE/IP, mode reverse-allowed, tunnel-users 1Input ACL users 0, Output ACL users 0IP MTU 1476 bytesPath MTU Discovery, mtu: 0, ager: 10 mins, expires: neveroutbound interface GigabitEthernet0/0.500HA created, CEF switching enabled, ICMP unreachable enabled5 minute input rate 0 bits/sec, 0 packets/sec5 minute output rate 0 bits/sec, 0 packets/sec0 packets input, 0 bytes, 0 drops155 packets output, 6820 bytesTunnel1:src 14.0.0.2, dest 55.84.33.1encap IP/IP, mode reverse-allowed, tunnel-users 3Input ACL users 0, Output ACL users 0IP MTU 1480 bytesPath MTU Discovery, mtu: 0, ager: 10 mins, expires: neveroutbound interface GigabitEthernet0/0.500HA created, CEF switching enabled, ICMP unreachable enabled5 minute input rate 1000 bits/sec, 6 packets/sec5 minute output rate 2000 bits/sec, 3 packets/sec30761 packets input, 1237816 bytes, 0 drops20229 packets output, 1520736 bytesrouter# show ip mobile tunnel briefMobile Tunnels:Total mobile ip tunnels 2SrcAddr DestAddr Encap Users Data Interval PktRt In/Out BitRt In/Out Pkts In/Out Bytes In/Out14.0.0.2 55.84.33.2 GRE/IP 1 5 minute 0/0 0/0 0/155 0/682014.0.0.2 55.84.33.1 IP/IP 3 5 minute 3/1 0/0 2291/1374 99016/87756router#show ip mob tunnel mip-udp aggregate-statisticsTunnel0 Aggregate Counters:5 minute input rate 0 bits/sec, 0 packets/sec5 minute output rate 0 bits/sec, 0 packets/sec300 packets input, 45600 bytes, 0 drops300 packets output, 39600 bytesshow ip mobile violation
To display information about security violations, use the show ip mobile violation EXEC command.
show ip mobile violation [address | nai string]
Syntax Description
address
(Optional) Displays violations from a specific IP address.
nai string
(Optional) Network access identifier.
Command Modes
EXEC
Command History
12.0(1)T
This command was introduced.
12.2(2)XC
The nai keyword and associated parameters were added.
Usage Guidelines
The most recent violation is saved for all the mobile nodes. A circular log holds up to 50 unknown requesters, violators without security association. The oldest violations will be purged to make room for new unknown requesters when the log limit is reached.
Security violation messages are logged at the informational level (see the logging global configuration command). When logging is enabled to include this severity level, violation history can be displayed using the show logging command.
Examples
The following is sample output from the show ip mobile violation command:
Router# show ip mobile violationSecurity Violation Log:Mobile Hosts:20.0.0.1:Violations: 1, Last time: 06/18/97 01:16:47SPI: 300, Identification: B751B581.77FD0E40Error Code: MN failed authentication (131), Reason: Bad authenticator (2)Table 15 describes significant fields shown in the display.
show ip route vrf
To check and display the routing table information corresponding to a VRF, use the show ip route vrf EXEC command.
show ip route vrf vrf-name
Syntax Description
Command Modes
EXEC
Command History
Examples
The following is sample output from the show ip route vrf command:
Router#show ip route vrf moip-vrfRouting Table: moip-vrfCodes: C - connected, S - static, R - RIP, M - mobile, B - BGPD - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter areaN1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2E1 - OSPF external type 1, E2 - OSPF external type 2i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2ia - IS-IS inter area, * - candidate default, U - per-user static routeo - ODR, P - periodic downloaded static routeGateway of last resort is not set4.0.0.0/32 is subnetted, 1 subnetsM 4.4.4.100 [3/1] via 92.92.92.1, 00:00:45, Tunnel0C 192.168.10.0/24 is directly connected, Tunnel0show policy-map apn realm
To display aggregate policing statistics for flows across the APN interface, use the show policy-map apn command in Privileged EXEC mode. Use the no form of the command to disable the feature.
show policy-map apn realm example.com
no show policy-map apn realm example.com
Syntax Description
Defaults
There are no default values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
In HA Release 5.0, all conformed, exceeded, or violated counters are not incremented and stay at 0 on both the CP and the TP when you configure show policy-map apn realm.
This occurs when you configure HA with a class map and a policy map, and apply the service-policy to both the uplink and downlink. Then send bidirectional traffic to the binding.
On the CP and TP, configure show policy-map apn realm realm.
On the TP, the conformed packet and violated packet are displayed in the show ip mobile binding policy output, but not in the show policy-map output.
Examples
The following example illustrates the show policy-map apn realm command:
Router#show policy-map apn realm @cisco.comRealm @cisco.comService-policy input: perbindingpoliceClass-map: class-mip (match-all)0 packets, 0 bytesMatch: flow pdppolice:rate pdppeak-rate pdp, be 1000 bytesconformed 0 packets, 0 bytes; actions: transmitexceeded 0 packets, 0 bytes; actions: dropviolated 0 packets, 0 bytes; actions: dropClass-map: class-default (match-any)0 packets, 0 bytesMatch: anyshow redundancy inter-dev
To display the current periodic sync interval value, use the show redundancy inter-dev privileged EXEC command. Use the no form to disable the display.
show redundancy inter-dev
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled by default.
Command Modes
Privilieged EXEC
Command History
snmp-server enable traps ipmobile
To configure Simple Network Management Protocol (SNMP) security notifications for Mobile IP, use the snmp-server enable traps ipmobile command in global configuration mode. To disable SNMP notifications for Mobile IP, use the no form of this command.
snmp-server enable traps ipmobile
no snmp-server enable traps ipmobile
Syntax Description
This command has no arguments or keywords.
Defaults
SNMP notifications are disabled by default.
Command Modes
Global Configuration
Command History
Usage Guidelines
SNMP Mobile IP notifications can be sent as traps or inform requests. This command enables both traps and inform requests.
For a complete description of this notification and additional MIB functions, see the RFC2006-MIB.my file, available on Cisco.com at http://www.cisco.com/public/mibs/v2/.
The snmp-server enable traps ipmobile command is used in conjunction with the snmp-server host command. Use the snmp-server host global configuration command to specify which host or hosts receive SNMP notifications. To send SNMP notifications, you must configure at least one snmp-server host command.
Examples
The following example enables the router to send Mobile IP informs to the host at the address myhost.cisco.com using the community string defined as public:
snmp-server enable traps ipmobilesnmp-server host myhost.cisco.com informs version 2c publicstandby track decrement priority
To lower the priority of an particular HA in a redundancy scenario, use the standby track tracking object id decrement priority command in global configuration mode. To disable this function, use the no form of the command.
standby track tracking object id decrement priority
no standby track tracking object id decrement priority
Syntax Description
Defaults
There are no default values.
Command Modes
Global Configuration
Command History
subscriber redundancy
To insure that the CPU is not overwhelmed by the bulk sync process, use the subscriber redundancy rate global configuration command. Use the no form of the command to disable this feature.
subscriber redundancy [ bulk | delay | dynamic | rate number of sessions Per Unit Time ]
no subscriber redundancy rate number of sessions Per Unit Time
Syntax Description
Command Default
This command is disabled by default. The default value for the number of sessions Per Unit Time is 500.
Command Modes
Global Configuration
Command History
Usage Guidelines
This command controls the bulk sync process. In case the number of bindings to be synced during bulk sync process is large, then no more than the number of Sessions Per unit time will be synced.
Examples
Here is an example of the subscriber redundancy rate command:
router(config)# subscriber redundancy ratetrack id application home-agent
To create a tracking object to track the home-agent state, use the track tracking object id application home-agent command in global configuration. To disable this feature, use the no form of the command.
track tracking object id application home-agent
no track tracking object id application home-agent
Syntax Description
Defaults
There are no default values.
Command Modes
Global Configuration
Command History
Examples
The following example illustrates the track application home-agent command:
router# track tracking object id application home-agentvirtual
To configure virtual server attributes, use the virtual virtual server configuration command. To remove the attributes, use the no form of this command.
virtual ip-address {tcp | udp} port-number [service service-name]
no virtual
Syntax Description
Defaults
No default behavior or values.
Command Modes
SLB virtual server configuration
Command History
12.0(7)XE
This command was introduced.
12.1(5)T
This command was integrated into Cisco IOS Release 12.1(5)T.
Usage Guidelines
The no virtual command is allowed only if the virtual server was removed from service by the no inservice command.
For some applications, it is not feasible to configure all the virtual server TCP or UDP port numbers for the IOS SLB feature. To support such applications, you can configure IOS SLB virtual servers to accept flows destined for all ports. To configure an all-port virtual server, specify a port number of 0.
Note
Examples
The following example specifies that the virtual server with the IP address 10.0.0.1 performs load balancing for TCP connections for the port named www. The virtual server processes HTTP requests.
ip slb vserver PUBLIC_HTTPvirtual 10.0.0.1 tcp wwwThe following example illustrates how to enable the Mobile IP SLB feature. The ip address is the virtual Home Agent address to which registration requests from PDSN/FA will be sent. This command is configured on the SLB Supervisor.
Router(config)# ip slb vserver <name>Router(config-slb-vserver)# virtual ip address udp 434 service ip mobileRelated Commands
Related Commandsvirtual 10.0.0.1 tcp www
ip slb vserver
Identifies a virtual server.
show ip slb vservers
Displays information about the virtual servers.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
©2009 Cisco Systems, Inc. All rights reserved.
Feedback