Cisco IOS Release 12.2SX System Message Guide
RADIUS through SPA
Downloads: This chapterpdf (PDF - 1.66MB) The complete bookPDF (PDF - 20.1MB) | Feedback

RADIUS Messages

Table Of Contents

RADIUS Messages

RADIUS-3

RADIUS-4

RADIUS-6

RANDOM Messages

RANDOM-6

RASP16 Messages

RBM Messages

RBM-0

RBM-1

RBM-2

RBM-3

RBM-4

RBM-5

RBM-6

RBM-7

RED_MODE Messages

RED_MODE-3

REDUNDANCY Messages

REDUNDANCY-3

REDUNDANCY-4

REDUNDANCY-6

REDUNDANCY_UTILS Messages

REGISTRY Messages

REGISTRY-2

REGISTRY-3

REMOTE_OIR_ISSU Messages

REMOTE_OIR_ISSU-3

REP Messages

REP-4

REP-5

REP_ISSU Messages

REP_ISSU-3

RESETMGR Messages

RESETMGR-3

RESETMGR-4

RF Messages

RF-3

RF-4

RF-5

RF-6

RF-7

RF_ISSU Messages

RF_ISSU-3

RFS Messages

RFS-3

RFS_ISSU Messages

RFS_ISSU-3

RITE Messages

RITE-5

RMON Messages

RMON-5

ROllBACK-ISSU Messages

ROLLBACK-ISSU-2

ROLLBACK-ISSU-3

ROUTEMAP Messages

ROUTEMAP-4

RPC Messages

RPC-2

RPF Messages

RPF-3

RPF-4

RP_MLP Messages

RP_MLP-3

RP_MLP-4

RP_MLP-5

RSP Messages

RSP-3

RSP-4

RSP-6

RSVP Messages

RSVP-1

RSVP-2

RSVP-3

RSVP-4

RSVP-5

RSVP_HA Messages

RSVP_HA-3

RTT Messages

RTT-3

RTT-4

RTT-6

RUNCFGSYNC Messages

RUNCFGSYNC-6

SASL Messages

SASL-2

SATVS_DNLD Messages

SATVS_DNLD-3

SATVS_IBC Messages

SATVS_IBC-3

SATVS_IBC-5

SATVS_UL_MGMT Messages

SATVS_UL_MGMT-3

SATVS_UL_MGMT-4

SATVS_UL_MGMT-5

SATVS_UL_MGMT-6

SATVS_WARM_UPGRADE Messages

SATVS_WARM_UPGRADE-3

SBFIFO Messages

SBFIFO-1

SBFIFO-3

SCHED Messages

SCP Messages

SCP-1

SCP-3

SCP-4

SCP-5

SDLC Messages

SDM Messages

SDM-6

SEC_LOGIN Messages

SEC_LOGIN-1

SEC_LOGIN-3

SEC_LOGIN-4

SEC_LOGIN-5

SFF8472 Messages

SFF8472-2

SFF8472-3

SFP Messages

SFP-3

SFP-4

SFP_SECURITY Messages

SFP_SECURITY-4

SGBP Messages

SGBP-1

SGBP-3

SGBP-5

SGBP-6

SGBP-7

SGPM Messages

SGPM-3

SHMWIN Messages

SHMWIN-6

SIBYTE Messages

SIBYTE-0

SIBYTE-3

SIBYTE-6

SIBYTE_ION

SIBYTE_ION-3

SIP10G_QM Messages

SIP10G_QM-2

SIP10G_QM-4

SIP10G_QM-6

SIP200 Messages

SIP200-3

SIP200-4

SIP200_MP Messages

SIP200_MP-1

SIP200_MP-3

SIP200_MP-4

SIP200_SPIRX Messages

SIP200_SPIRX-3

SIP200_SPITX Messages

SIP200_SPITX-3

SIP400 Messages

SIP400-2

SIP600 Messages

SIP600-2

SIP600-3

SIP600-4

SIP600-6

SIP600_PARSING_ENGINE Messages

SIP600_QOS Messages

SIP600_QOS-2

SIP600_QOS-3

SIP600_QOS-4

SIPSPA Messages

SIPSPA-3

SIPSPA-4

SIPSPA-6

SLB Messages

SMC Messages

SMC-2

SMSC_RP Messages

SMSC_RP-3

SMSC_RP-6

SNASW Messages

SNASW-3

SNASW-4

SNMP Messages

SNMP-3

SNMP-4

SNMP-5

SNMP_BULKSTAT Messages

SNMP_BULKSTAT-3

SNMP_BULKSTAT-4

SNMP_MGR Messages

SNMP_MGR-3

SNMP_MGR-4

SNMP_MIB_ISSU Messages

SNMP_MIB_ISSU-2

SNMP_MIB_ISSU-3

SONET Messages

SONET-3

SONET-6

SPA Messages

SPA-0

SPA-2

SPA-3

SPA-4


RADIUS Messages

This section contains RADIUS messages.

RADIUS-3

Error Message    %RADIUS-3-AIDDEFINEFAILED: a_id definition ignored. 

Explanation    An attempt to store a corrupted authority ID (a_id) failed or memory allocation failed during authority ID definition. Any existing authority ID will be preserved.

Recommended Action    Configure a proper authority ID.

Error Message    %RADIUS-3-CANNOT_OPEN_SOCKET: Cannot open UDP socket for service %s 

Explanation    The router is unable to open a socket for UDP communications by the indicated service.

Recommended Action    Check your configuration to make sure that no other services are using the same port.

Error Message    %RADIUS-3-CORRUPTCONTEXT: Bad Magic pattern in [chars]:[hex], 
magic:[hex]! 

Explanation    The magic pattern imprinted on the internal hash table data structures in the RADIUS subsystem is missing, which indicates memory corruption.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RADIUS-3-INVALIDFORMAT: Invalid Nas Port Format: [chars] [char] 

Explanation    The user is attempting to configure an incorrect format string.

Recommended Action    Enter a 32-character string using supported characters only.

Error Message    %RADIUS-3-NOACCOUNTINGRESPONSE: Accounting message [chars] for session 
[chars] failed to receive Accounting Response. 

Explanation    There was no response from the RADIUS server, and the maximum number of retransmissions has been exceeded. The network or the RADIUS server may be down.

Recommended Action    Check the network connectivity to the RADIUS servers and check that the servers are running.

Error Message    %RADIUS-3-NOATTRLIST: No attribute-list passed through parser. 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RADIUS-3-SERVERTYPEMISMATCH: Servers [IP_address] and [IP_address] in 
server group '[chars]' are of different types. 

Explanation    All the servers in a server group should be of either type: standard or nonstandard.

Recommended Action    Check the running configuration and verify that all the radius servers in the specified server group are of the same type: either standard or nonstandard.

Error Message    %RADIUS-3-SOURCEPORTALLOCERROR: Warning: Unable to allocate port [dec] 

Explanation    The system was unable to allocate the port specified in the message. The system will not have the full range of source ports.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RADIUS-3-UNKNOWNAPI: Unknown API type %d 

Explanation    The RADIUS process has been invoked using an unknown application program interface (API) type. This condition is the result of a fault in the RADIUS subsystem.

Recommended Action    Collect traceback and contact your technical support representative.

Error Message    %RADIUS-3-ZEROATTRLEN: Radius attr [dec] len 0 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RADIUS-4

Error Message    %RADIUS-4-BADATTRLIST: Unable to process attribute list. 

Explanation    The attribute list is syntactically incorrect.

Recommended Action    Specify the attribute list as a comma-delimited string of integers between 1 and 255.

Error Message    %RADIUS-4-NOATTRLISTDEF: Warning: Attribute list [chars] is not 
defined. 

Explanation    The given attribute list is not defined.

Recommended Action    Define the attribute list as soon as possible.

Error Message    %RADIUS-4-NOPUBLICSERV: Warning: No servers were found in the public 
server list. 

Explanation    No servers are in the global public servers list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RADIUS-4-RADIUS_ALIVE: RADIUS server [IP_address]:[int],[int] has 
returned. 

Explanation    A RADIUS server that previously was not responding has responded to a new request.

Recommended Action    No action is required.

Error Message    %RADIUS-4-RADIUS_DEAD: RADIUS server [IP_address]:[int],[int] is not 
responding. 

Explanation    A RADIUS server has not responded to repeated requests.

Recommended Action    Check to see if the RADIUS server is still active.

RADIUS-6

Error Message    %RADIUS-6-RESETDEADSERVER: Group [chars]: Marked alive as Radius 
server [IP_address]:[dec],[dec] configured. 

Explanation    The RADIUS server is configured in the server group that was previously marked dead.

Recommended Action    This is an informational message only. No action is required.

RANDOM Messages

This section contains utility messages.

RANDOM-6

Error Message    %RANDOM-6-RANDOM: A pseudo-random number was generated twice in 
succession 

Explanation    A pseudo-random number generator produced the same number twice in succession.

Recommended Action    Under normal circumstances, a pseudo-random number generator will occasionally produce the same number twice in succession, which is not a problem. However, if this message occurs frequently, the system should be manually reloaded. If the message is persistent across reloads, copy the error message exactly as it appears, and report it to your Cisco technical support representative.

RASP16 Messages

This section contains interface multiplexer ASIC messages.

Error Message    %RASP16-5-NULL_RASP16_OBJECT: The Interface Multiplexer device object 
pointer is set to NULL. 

Explanation    The memory location of the interface multiplexer device object is invalid. The interface multiplexer ASIC operation is disabled and the device interrupt is now masked.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RASP16-5-RASP_INIT_FAILURE: The Interface Multiplexer ASIC 
initialization failed. 

Explanation    The interface multiplexer ASIC could not be initialized. As a result, this device is not operational and has been disabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RBM Messages

This section contains Role-based Access Control Manager (RBM) messages.

RBM-0

Error Message    %RBM-0-RBM_EMERG: %s 

Explanation    An error occurred in the Role-based Access Control Manager (RBM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RBM-1

Error Message    %RBM-1-RBM_ALERT: %s 

Explanation    An error occurred in the Role-Based Manager (RBM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RBM-2

Error Message    %RBM-2-RBM_CRIT: %s 

Explanation    An error occurred in the Role-based Access Control Manager (RBM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RBM-3

Error Message    %RBM-3-RBM_ERR: %s 

Explanation    An error occurred in the Role-based Access Control Manager (RBM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RBM-3-RBM_PARSE_ACE: Could not parse command for adding ACE '[chars]' 
to [chars] Role-Based Access List '[chars]' 

Explanation    An error occured while attempting to add an ACE to a Role-Based Access List. The ACE syntax is most likely incompatible with the type of RBACL.

Recommended Action    Verify the syntax of the ACEs of the RBACL in ACS and the IP protocol versions the RBACL applies to. RBACL ACE syntax could be verified by manually configuring IP/IPv6 RBACL on the system within (config-rb-acl)/(config-ipv6rb-acl) configuration mode respectively.

Error Message    %RBM-3-RBM_PARSE_RBACL: Could not parse command for creating [chars] 
Role-Based Access List '[chars]' '[chars]' 

Explanation    An error occured while attempting to create Role-Based Access List.

Recommended Action    This error could occur when TrustSec attempts to install RBACL it has acquired from ACS while configuration mode is locked exclusively. TrustSec will retry this operation and should eventually succeed once configuration mode is no longer locked. If the error occurs when the configuration mode is not locked or if the RBACL does not get installed after the configuration mode lock is released.

RBM-4

Error Message    %RBM-4-RBM_WARNING: %s 

Explanation    An error occurred in the Role-based Access Control Manager (RBM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RBM-5

Error Message    %RBM-5-RBM_NOTICE: %s 

Explanation    This is a notice message from the Role-based Access Control Manager (RBM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RBM-6

Error Message    %RBM-6-RBM_INFO: %s 

Explanation    This is an informational message from the Role-based Access Control Manager (RBM).

Recommended Action    No action is required.

RBM-7

Error Message    %RBM-7-RBM_ASSERT: Assertion Failure ( %s @%s:%d ) : %s 

Explanation    An error occurred in the Role-based Access Control Manager (RBM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RED_MODE Messages

This section contains high availability redundancy mode messages.

RED_MODE-3

Error Message    %RED_MODE-3-CAPENTRY_REG: Red Mode Cap Entry ([dec]) for Entity 
([dec]) Registration failed ([chars]) 

Explanation    A capability entry could not be registered for the redundancy mode ISSU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability entries command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-CAPGROUP_REG: Red Mode Cap Group ([dec]) for Entity 
([dec]) Registration failed ([chars]) 

Explanation    A capability group could not be registered for the redundancy mode ISSU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show capability groups command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-CAP_REG: Red Mode cap reg failed: reason [dec] 

Explanation    The capabilities of the redundancy mode ISSU could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability arguments command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-CAPTYPE_REG: Red Mode Cap Type for Entity ([dec]) 
Registration failed ([chars]) 

Explanation    A capability type could not be registered for the redundancy mode ISSU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability types command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-CLIENT_REG: Red Mode Client ([dec]) Registration failed 
([chars]) 

Explanation    The redundancy mode ISSU client could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu clients command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-CLIENT_REG_FAILED: Red Mode ISSU client ([dec]) Client 
registration failed. [chars] 

Explanation    The redundancy mode ISSU client could not be registered during system initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu clients command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-DELAYED_REGISTER: Delayed registration could not be 
completed succesfully, Operand = [dec] 

Explanation    The delayed registration operation for the RF-proxy clients could not complete successfully.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-ENTITY_REG: Red Mode Entity ([dec]) Registration failed 
([chars]) 

Explanation    The redundancy mode ISSU entity could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu entities command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-GET_BUFFER: Red Mode ISSU session ([dec]) failed to get 
buffer 

Explanation    The redundancy mode ISSU session was unable to get a buffer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-IPC_AGENT: [chars] [ [chars] ] 

Explanation    There has been a failure in the redundancy mode IPC agent.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-ISSU_BASE_CLIENT_INCOMP: One or more ISSU base clients are 
incompatible, fallback to RPR 

Explanation    An incompatible ISSU base client caused the redundancy mode to revert to route processor redundancy (RPR) mode.

Recommended Action    Check the console log for the name and ID of the incompatible ISSU base clients.

Error Message    %RED_MODE-3-ISSU_NEGOTIATION: [chars] [ [chars] ] 

Explanation    There has been a failure in the redundancy mode client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-ISSU_RESET_PEER_IMAGE_COMP: Failed to reset peer image to 
be compatible 

Explanation    The redundancy process was unable to reset the peer image to be compatible after the standby device came back up in RPR mode. This message is usually seen in conjunction with an ISSU module error message.

Recommended Action    Examine the associated ISSU message for the cause of the failure and the recommended action.

Error Message    %RED_MODE-3-ISSU_SET_BASE_CLIENT_INCOMP: Failed to set base client 
incompatibility 

Explanation    The redundancy process was unable to set the base client incompatibility.

Recommended Action    Check the console log for the name and ID of the incompatible ISSU base clients.

Error Message    %RED_MODE-3-MSG_DATAPTR: Red Mode Client ([dec]) get msg dataptr 
failed. Error = [dec] 

Explanation    The redundancy mode ISSU client could not obtain a message data pointer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-MSGGROUP_REG: Red Mode Msg Group ([dec]) for Entity 
([dec]) Registration failed ([chars]) 

Explanation    The message group for the redundancy mode ISSU entity could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message groups command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-MSG_MTU: Red Mode Client ([dec]) get msg mtu failed. Error 
= [dec] 

Explanation    The redundancy mode ISSU client could not obtain the message size.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-MSG_REG: Red Mode msg reg failed: reason [dec] 

Explanation    Messages for the redundancy mode ISSU could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message arguments command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-MSG_SEND: Red Mode ISSU client for session ([dec]) failed 
to send message. Error Code = [chars] 

Explanation    The redundancy mode ISSU client could not send a negotiation message to a peer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-MSGTYPE_REG: Red Mode Msg Type for Entity ([dec]) 
Registration failed ([chars]) 

Explanation    The message type for the redundancy mode ISSU entity could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message types command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-NO_DEREGISTER: Could not deregister plugin for redundancy 
mode [chars] 

Explanation    At system initialization the plugin that describes the capabilities of this redundancy mode could not be deregistered with the redundancy mode client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-RED_MODE_MSG_NOT_OK: Red Mode ISSU msg type ([dec]) is not 
ok 

Explanation    The redundancy mode ISSU message type has not negotiated correctly.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message types clientID command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-RED_MODE_START_NEGO_FAILED: Red Mode ISSU start nego 
session failed ([chars]) 

Explanation    The redundancy mode ISSU could not start its negotiation process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-RED_MODE_XFROM_FAIL: Red Mode ISSU [chars] transformation 
failed ([chars]) 

Explanation    The transformation operation for the redundancy mode ISSU message has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm and show issue sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-SELECT_MODE: The mode change to [dec] was unsuccessful rc 
= [dec], force = [dec], caller = [dec] 

Explanation    The specified mode change operation did not complete successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the gathered information.

Error Message    %RED_MODE-3-SESSION_REG: Red Mode session for Entity ([dec]) 
Registration failed ([chars]) 

Explanation    The redundancy mode ISSU session could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RED_MODE-3-SESSION_UNREG: Red Mode session ([dec]) Un-Registration 
failed ([chars]) 

Explanation    The redundancy mode ISSU session could not be unregistered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

REDUNDANCY Messages

This section contains high availability redundancy messages.

REDUNDANCY-3

Error Message    %REDUNDANCY-3-EHSAISSU: %s failed with error code [ %s ] 

Explanation    An ISSU-related error occurred in the redundancy process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REDUNDANCY-3-EHSAPARSER: parser failure - [chars]: tty=[dec] 
orig_parse_cli_type=[dec] parse_cli_type=[dec] 

Explanation    An EHSA parser error occurred. The details about the failure will beprinted.

Recommended Action    Copy the error message exactly as it appears. Copy down the system's configuration along with any other relevant information. Contact your technical support representative for assistance.

Error Message    %REDUNDANCY-3-MEMORY_DIFF: WARNING, nonsymetrical configuration: 
Active has [dec]K Standby has [dec]K 

Explanation    The redundant route processors (RPs) have different memory configurations. The configuration is allowed but is discouraged.

Recommended Action    Attempt to avoid configuring a system with redundant RPs that have different memory configurations.

REDUNDANCY-4

Error Message    %REDUNDANCY-4-PEER_DID_NOT_RESPOND: Resetting peer [chars] because it 
did not respond to verification of HA role. 

Explanation    The platform uses high availability (HA) hardware lines to perform HA role negotiation during the system boot time. The standby controller card verifies its role as the standby with the active controller card through the MBUS. If the active controller card does not respond, it is reset as it is either nonresponsive (hung) or is running an earlier version of Cisco IOS software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REDUNDANCY-4-RELOADING_STANDBY: Reloading the Standby [chars] 

Explanation    The active system has sent a reload IPC request to the standby peer. If the reload is not successful, the standby peer will be power cycled rather than reloaded.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

REDUNDANCY-6

Error Message    %REDUNDANCY-6-STANDBY_HAS_RELOADED: The Standby [chars] has reloaded; 
reason: [chars] 

Explanation    The standby peer reloaded itself to correct a configuration mismatch between the active system and the standby peer. The standby peer detected that it is missing the configuration for a line card. This situation probably occurred because the standby peer was reloaded before the new card was inserted.

Recommended Action    No action is required.

Error Message    %REDUNDANCY-6-SWITCHOVERTIME: Time taken to switchover = [dec] 
milliseconds 

Explanation    This message displays the time elapsed for the standby peer to become active following a failure of the existing active system.

Recommended Action    No action is required.

REDUNDANCY_UTILS Messages

This section contains high availability redundancy utilities messages.

Error Message    %REDUNDANCY_UTILS-3-INVALID_UNIT_DESIGNATION: An invalid redundancy 
designation ([chars]) has been detected. 

Explanation    The redundancy utility assigns each system a unit designation of either active unit, standby unit, or other unit. This designation was found to be invalid in the run-time module associated with the system traceback message. This condition most likely occurred because of a software error. The message text provides more information on the specific cause of the error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

REGISTRY Messages

This section contains registry-related (REGISTRY) messages.

REGISTRY-2

Error Message    %REGISTRY-2-REG_FLAG_DEADLOCK: Registry call to [chars] timed out due 
to deadlock 

Explanation    When a remote registry is not serviced within 25 seconds, the remote process (and presumably the entire system) is deadlocked. This message is printed when the deadlock is broken by a timeout.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REGISTRY-2-REG_PARSE_ERROR: [chars]: Could not parse notification 
[chars] : error/no. of items = [dec] 

Explanation    The registry library is unable to parse a notification that was received from a name server. This condition could exist for several reasons:

- There is a bug in the sscanf function.
- The notification block is corrupted.
- The pathname published to the name server is invalid.

This issue is serious and affects interprocess communications.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

REGISTRY-3

Error Message    %REGISTRY-3-FASTCASE_OUT_OF_BOUNDS: Attempt made in [chars] to 
register with out of bounds key. 

Explanation    In FASTCASE registry, the key must be smaller than the size specified when the registry was created. An attempt was made to register with a key that is out of bounds.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REGISTRY-3-REG_FLAG_ERR: Invalid combination of registry flag and 
scheduler control : [chars] 

Explanation    Process blocking has been disabled using either the raise_interrupt_level or the assign_blocking_disabled process. As a result of this action, a remote registry that contains the reg_flag_data_safe or reg_flag_peer flag has been invoked.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REGISTRY-3-REG_SUSPEND: Registry of type SUSPEND called when suspends 
are not allowed. 

Explanation    Process blocking has been disabled using either the raise_interrupt_level or the assign_blocking_disabled process. As a result of this action, a remote registry of the suspend type has been invoked.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REGISTRY-3-REG_XDR: [chars] 

Explanation    An error occurred while processing a parameter to a remote (interprocess) registry call.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REGISTRY-3-SEQ_LIST_OVERWRITE: Attempt made to overwrite a set 
sequence function (%s) 

Explanation    A single function can be set as a callback for a specified sequence number for a sequenced list registry. An attempt to set a new callback failed because a callback function has already been set for this sequence number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

REMOTE_OIR_ISSU Messages

This sections contains remote online insertion and removal (OIR) in-service software upgrade (ISSU) messages.

REMOTE_OIR_ISSU-3

Error Message    %REMOTE_OIR_ISSU-3-BUFFER: Cat6K Remote OIR ISSU client failed to a 
buffer for message, error %d 

Explanation    The remote OIR ISSU client failed to get a buffer for building a negotiation message. As a result, the client cannot send a negotiation message and the standby unit cannot be brought up.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show checkpoint client commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-CAPABILITY: Cat6K Remote OIR ISSU client %s 

Explanation    The remote OIR ISSU client detected an error during capability negotiation. As a result, there is a mismatch in the client capability between the active and standby unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu capability entries, show issu session, and show issu negotiated capability commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-INIT: Cat6K Remote OIR ISSU client initialization 
failed at %s, error %s 

Explanation    The remote OIR ISSU client could not be initialized. This condition will cause a catastrophic failure when an ISSU upgrade or downgrade is performed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-MSG_NOT_OK: Cat6K Remote OIR ISSU client message %d 
is not compatible 

Explanation    The remote OIR ISSU client received an incompatible message from the peer unit. The message cannot be processed by this unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu message group, show issu session, and show issu negotiated version commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-MSG_SIZE: Cat6K Remote OIR ISSU client failed to 
get the message size for message %d 

Explanation    The remote OIR ISSU client was unable to calculate the message size for the message specified. The client will be unable to send the message to the standby unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu message group, show issu session, and show issu negotiated version commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-POLICY: Cat6K Remote OIR ISSU client message type 
%d is %s 

Explanation    The remote OIR ISSU client received a message type that it does not support. A policy is applied to make the session compatible.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, and show issu session commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-SEND_FAILED: Cat6K Remote OIR ISSU client failed to 
send a negotiation message, error %d 

Explanation    The remote OIR ISSU client could not send a session negotiation message to the peer. As a result, the standby unit cannot be brought up.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show checkpoint client commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-SESSION: Cat6K Remote OIR ISSU client %s 

Explanation    The remote OIR ISSU client detected an error during a session negotiation with the peer unit. As a result, the standby unit cannot be brought up.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu capability entries, show issu session, and show issu negotiated capability commands and your pertinent troubleshooting logs.

Error Message    %REMOTE_OIR_ISSU-3-TRANSFORM: Cat6K Remote OIR ISSU client %s 
transform failed, error %s 

Explanation    The remote OIR ISSU client could not transform the message. If the transmit transformation failed, the checkpoint message cannot be sent to the standby unit. If the receive transformation failed, the checkpoint message cannot be applied on the standby unit. In either case, the OIR state of the bay will not be identical with the active unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu session, and show issu negotiated version commands and your pertinent troubleshooting logs.

REP Messages

This sections contains Resilient Ethernet Protocol (REP) messages.

REP-4

Error Message    %REP-4-LINKSTATUS: %s (segment %d) is %s 

Explanation    The Resilient Ethernet Protocol (REP) link status has changed. If the status changed to nonoperational, a reason is displayed.

Recommended Action    No action is required.

REP-5

Error Message    %REP-5-PREEMPTIONFAIL: can not perform preemption on segment %d due to 
%s 

Explanation    A Resilient Ethernet Protocol (REP) preempt operation failed. The failure could be caused by specifying an invalid port ID or neighbor number with the rep preempt block port command or by configuring the rep preempt block port preferred command while no REP port is configured with a preferred flag.

Recommended Action    Correct the configuration and run REP manual preemption on the primary edge port by entering the rep preempt segment command.

REP_ISSU Messages

This sections contains Resilient Ethernet Protocol (REP) in-service software upgrade (ISSU) messages.

REP_ISSU-3

Error Message    %REP_ISSU-3-BUFFER: REP ISSU client failed to get buffer for message, 
error %d 

Explanation    The Resilient Ethernet Protocol (REP) ISSU client was unable to get buffer space for building a negotiation message. As a result, it cannot send the negotiation message to the standby unit and the standby unit cannot be brought up.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show checkpoint client commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-CAPABILITY: REP ISSU client %s 

Explanation    The REP ISSU client detected an error during capability negotiation. As a result, there is a mismatch in the client capability between the active and standby unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu capability entries, show issu session, and show issu negotiated capability commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-INIT: REP ISSU client initialization failed at %s, error %s 

Explanation    The REP ISSU client could not be initialized. This condition will cause a catastrophic failure when an ISSU upgrade or downgrade is performed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-MSG_NOT_OK: REP ISSU client message %d is not compatible 

Explanation    The REP ISSU client received an incompatible message from the peer unit. The message cannot be processed by this unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu message group, show issu session, and show issu negotiated version commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-MSG_SIZE: REP ISSU client failed to get the message size 
for message %d 

Explanation    The REP ISSU client was unable to calculate the message size for the message specified. The REP ISSU client will be unable to send the message to the standby unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu message group, show issu session, and show issu negotiated version commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-POLICY: REP ISSU client message type %d is %s 

Explanation    The REP ISSU client received a message type that it does not support. A policy is applied to make the session compatible.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, and show issu session commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-SEND_FAILED: REP ISSU client failed to send a negotiation 
message, error %d 

Explanation    The REP ISSU client could not send a session negotiation message to the peer. As a result, the standby unit cannot be brought up.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show checkpoint client commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-SESSION: REP ISSU client %s 

Explanation    The REP ISSU client detected an error during a session negotiation with the peer unit. As a result, the standby unit cannot be brought up.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu capability entries, show issu session, and show issu negotiated capability commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-SESSION_UNREGISTRY: REP ISSU client failed to unregister 
session information. Error: %d (%s) 

Explanation    The REP ISSU client was unable to unregister session information.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu session, and show issu negotiated capability commands and your pertinent troubleshooting logs.

Error Message    %REP_ISSU-3-TRANSFORM: REP ISSU client %s transform failed, error %s 

Explanation    The REP ISSU client could not transform the message. If the transmit transformation failed, the checkpoint message cannot be sent to the standby unit. If the receive transformation failed, the checkpoint message cannot be applied on the standby unit. In either case, the port manager state will not be identical with the active unit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu session, and show issu negotiated version commands and your pertinent troubleshooting logs.

RESETMGR Messages

This sections contains reset manager messages.

RESETMGR-3

Error Message    %RESETMGR-3-NOMEM: Failed to allocate memory to add ID (%d) to table 

Explanation    The reset manager was unable to allocate memory to add the unique ID and process name to its table. If this process is restarted on the active system, the standby system might not be reset due to this error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RESETMGR-3-RESET: Reset Manager has reset the system due to '%s' 
process restart 

Explanation    The standby system is being forced to reset by the reset manager. The reset manager stores a set of IDs, each of which uniquely identifies a process on the system. If one of these monitored processes is restarted, the standby unit will be reset so that the versioning infrastructure can renegotiate. This is not a software fault.

Recommended Action    No action is required.

Error Message    %RESETMGR-3-RESET_UNKNOWN: A restarted process could not be identified 
by its Job ID, the Reset Manager has reset the Standby system. 

Explanation    The reset manager stores a set of IDs, each of which uniquely identifies a process on the system. A process was restarted but it could not be uniquely identified by its job ID. Because it cannot be determined whether the restarted process was being monitored by the reset manager, the standby system is being reset. This is probably due to a software fault on the system.

Recommended Action    No action is required.

Error Message    %RESETMGR-3-SYSMGR_JOBID_LOOKUP: Failed to get the job ID of the Reset 
Manger (IOS blob) from SysMgr 

Explanation    The reset manager was unable to get its job ID from the system manager. The reset manager cannot function without this information and will suspend any further initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RESETMGR-4

Error Message    %RESETMGR-4-SYSMGR_PROCNAME_LOOKUP: Failed to lookup process name from 
SysMgr, job ID = %d 

Explanation    The reset manager was unable to get the name of the process with the specified job ID from the system manager. Although this is a system manager error, the system can continue to operate normally because the process name is used only for reference purposes.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RF Messages

This sections contains redundancy facility (RF) messages.

RF-3

Error Message    %RF-3-CANNOT_SWITCH: Cannot switchover; the peer Route Processor (RP) 
is not available 

Explanation    Cannot initiate switchover. The peer RP is not available.

Recommended Action    This is an informational message only. No action is required.

Error Message    %RF-3-CANT_GET_VERSION: Cannot get version info from peer Route 
Processor (RP); the RP software is incompatable. 

Explanation    The standby RP cannot get version information from the peer RP. The likely cause is incompatible software.

Recommended Action    Ensure that the same software image is running on both RPs.

Error Message    %RF-3-FAILED_SET_RED_MODE: ACTIVE failed to set redundancy mode. 
STANDBY has selected mode but unable to get confirmation from ACTIVE. 

Explanation    Under normal conditions, the standby RP selects the redundancy mode and sends its decision to the active RP. The active RP uses it to determine the system mode and returns the final decision on the mode to the standby RP. This system message indicates that the exchange has failed, and the standby RP does not have the right redundancy mode to proceed.

Recommended Action    Allow the standby RP to reset once. If the problem persists, verify that all modules are working properly.

Error Message    %RF-3-NEGOTIATED_ROLE_MISMATCH: Negotiated Role mismatch; The Route 
Processor (RP) believes it should be ACTIVE while the System Processor (SP) 
believes the RP should be STANDBY... or vice versa. 

Explanation    The RP negotiates its role (active or standby) at boot time. If the other RP is running an image that does not contain role negotiation code, then the role that is negotiated may not be valid. When this occurs, the RP detecting a mismatch between the role specified by the SP and the role negotiated will be rebooted.

Recommended Action    Ensure that the same software image is running on both RPs. Make sure that neither RP is running the bootloader image.

Error Message    %RF-3-NON_HA_SWITCHOVER: The SP switchover was NOT stateful. To 
support SSO on the RP, the SP must be configured with HA enabled. 

Explanation    The switch processor switchover that occurred was not stateful. Stateful switchover (SSO) mode on the route processor requires the switch processor to run with high availability enabled to ensure that appropriate state is synchronized between the switch processors and that there is sufficient state information on the new active switch processor to support the switchover of the route processor while in stateful switchover mode. Because there is insufficient state to support a route processor switchover in stateful switchover mode, the recovery is to reset the route processor and reboot it.

Recommended Action    Configure the SP to enable HA. If HA is enabled, it is possible that resource exhaustion (such as memory) might have caused this non-HA switchover. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF-3-NOTIF_TID: Notification timer extended for the wrong client, 
cur-client=%d, req-client=%d 

Explanation    The current redundancy facility (RF) client attempted to extend the RF notification timer using a client ID other than its own. This is an internal software error. The message text on the console or in the system log contains error details such as the current client ID number and the requested client ID number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show redundancy history commands and your pertinent troubleshooting logs.

Error Message    %RF-3-PEER_RP_RELOAD: The peer Route Processor (RP) is being reset 
because [chars] 

Explanation    This message provides the reason that the peer RP reset. The peer RP resets in an attempt to recover from an indeterminate state.

Recommended Action    If the condition persists after the reset, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF-3-VERSION_MISMATCH: Version Info mismatch; Not running same 
version of software on each Route Processor (RP). Cannot run in SSO mode; will go 
to RPR mode instead. 

Explanation    Each RP must be running the same version of software. The version check indicates that there is a version mismatch. As a result, the RPs cannot run in SSO (hot-standby) mode and operation will regress to RPR mode.

Recommended Action    Ensure that both RPs are running the same software image.

Error Message    %RF-3-WAKEUP_STANDBY_NOT_SEEN: Active-Standby RP Handshake Error.  The 
Standby RP did not receive a WAKEUP_STANDBY message from the Active RP during the 
early initialization phase on the Standby RP.

Explanation    As part of the early initialization phase, the standby RP requests that the active RP notify it when the active RP is ready to support the standby RP. The active RP has failed to wake the standby RP. The active RP may have failed during the standby RP's early initialization phase or some other error has prevented the active RP from completing this handshake.

Recommended Action    The standby RP will be restarted. If the problem persists, restart the system.

RF-4

Error Message    %RF-4-MEMORY_SIZE_MISMATCH: Memory Size mismatch: The redundant Route 
Processors have different memory configurations. To support the High Availability 
feature, it is recommended that both RPs have the same memory configurations. 

Explanation    To support the high availability feature, it is recommended that both redundant route processors have the same memory configuration.

Recommended Action    Install the same amount of memory on both RPs.

RF-5

Error Message    %RF-5-RF_RELOAD: %s. Reason: %s 

Explanation    The current redundancy facility (RF) has invoked a reload.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show redundancy history reload commands and your pertinent troubleshooting logs.

Error Message    %RF-5-RF_TERMINAL_STATE: Terminal state reached for (%s) 

Explanation    The current redundancy facility (RF) has reached a terminal state for the operating mode.

Recommended Action    This is a notification message only. No action is required.

Error Message    %RF-5-SEND_FAIL: RF client progression send failure for reason (%s) 

Explanation    The current redundancy facility (RF) failed to send a client progression to the standby client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show redundancy history commands and your pertinent troubleshooting logs.

RF-6

Error Message    %RF-6-CONS_MSG: Console Message from [chars] RP: [chars] 

Explanation    This message is a console message from the peer RP.

Recommended Action    This is an informational message only. No action is required.

Error Message    %RF-6-NEGOTIATED_RED_MODE: Negotiated Redundancy MODE is [chars] 

Explanation    The negotiated redundancy mode may be either SSO or RPR.

Recommended Action    This is an informational message only. No action is required.

Error Message    %RF-6-STANDBY_READY: The Standby RP has reached HOT-STANDBY state and 
is now ready for stateful switchover. 

Explanation    The standby RP has reached the hot-standby state and is now ready to take over operation in the event that the active RP should fail.

Recommended Action    No action is required.

RF-7

Error Message    %RF-7-KPA_WARN: RF KPA messages have not been heard for [dec] seconds 

Explanation    RF keepalive messages have not been sent from the peer. This message is posted after every third KPA timer expiry.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RF_ISSU Messages

This sections contains redundancy facility (RF) in-service software upgrade (ISSU) messages.

RF_ISSU-3

Error Message    %RF_ISSU-3-CAPENTRY_REG: RF Cap Entry ([dec]) for Entity ([dec]) 
Registration failed 

Explanation    A capability entry could not be registered for the RF ISSU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability entries command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-CAPGROUP_REG: RF Cap Group ([dec]) for Entity ([dec]) 
Registration failed 

Explanation    A capability group could not be registered for the RF ISSU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show capability groups command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-CAP_REG: RF cap reg failed: reason [dec] 

Explanation    The capabilities of the RF ISSU could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability arguments command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-CAPTYPE_REG: RF Cap Type for Entity ([dec]) Registration 
failed 

Explanation    A capability type could not be registered for the RF ISSU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability types command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-CLIENT_REG: RF Client ([dec]) Registration failed 

Explanation    The RF ISSU client could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu clients command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-CLIENT_REG_FAILED: RF ISSU client ([dec]) Client 
registration failed. [chars] 

Explanation    The RF ISSU client could not be registered during system initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu clients command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-ENTITY_REG: RF Entity ([dec]) Registration failed 

Explanation    The RF ISSU entity could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu entities command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-GET_BUFFER: RF ISSU session ([dec]) failed to get buffer 

Explanation    The RF ISSU failed to get a buffer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-MSG_DATAPTR: RF Client ([dec]) get msg dataptr failed. 
Error = [dec] 

Explanation    The RF ISSU client could not obtain a message data pointer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-MSGGROUP_REG: RF Msg Group ([dec]) for Entity ([dec]) 
Registration failed 

Explanation    The message group for the RF ISSU could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message groups command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-MSG_MTU: RF Client ([dec]) get msg mtu failed. Error = [dec] 

Explanation    The RF ISSU client could not obtain message size.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-MSG_REG: RF msg reg failed: reason [dec] 

Explanation    Messages for the RF ISSU could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message arguments command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-MSG_SEND: RF ISSU client for session ([dec]) failed to send 
message 

Explanation    The RF ISSU client could not send a negotiation message to a peer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-MSGTYPE_REG: RF Msg Type for Entity ([dec]) Registration 
failed 

Explanation    The message type for the RF ISSU could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message types command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-RF_MSG_NOT_OK: RF ISSU msg type ([dec]) is not ok 

Explanation    RF ISSU message type has not negotiated correctly.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show message types Client_ID command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-SESSION_REG: RF session for Entity ([dec]) Registration 
failed 

Explanation    The RF ISSU session could not be registered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-SESSION_UNREG: RF session ([dec]) Un-Registration failed 

Explanation    The RF ISSU session could not be unregistered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RFS Messages

This section contains remote file system messages.

RFS-3

Error Message    %RFS-3-CAPENTRY_REG: RFS Cap Entry ([dec]) for Entity ([dec]) 
Registration failed 

Explanation    RFS ISSU cap entry registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability entries command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CAPGROUP_REG: RFS Cap Group ([dec]) for Entity ([dec]) 
Registration failed 

Explanation    RFS ISSU cap group registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability groups command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CAPTYPE_REG: RFS Cap Type for Entity ([dec]) Registration 
failed 

Explanation    RFS ISSU cap type registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu capability types command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CLIENT_REG: RFS Client ([dec]) Registration failed 

Explanation    RFS ISSU client registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu clients command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CLIENT_SESSION_REG: RFS ISSU client shared msg session for 
entity ([dec]) registration failed 

Explanation    RFS ISSU client shared message session registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CLIENT_SESSION_UNREG: RFS session ([dec]) Un-Registration 
failed 

Explanation    RFS ISSU client session unregistration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CREATE_ACTIVE_PORT: RFS create active port ([chars]) failed 

Explanation    RFS ISSU active port creation has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show ipc port command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CREATE_CLIENT_PORT: RFS create client port (%s) failed 

Explanation    The remote file system (RFS) ISSU client was unable to create a client port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show ipc port commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CREATE_SERVER_PORT: RFS create server port (%s) failed 

Explanation    The RFS ISSU client was unable to create a server port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show ipc port commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-CREATE_STANDBY_PORT: RFS create standby port ([chars]) failed 

Explanation    RFS ISSU standby port creation has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show ipc port command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-ENTITY_REG: RFS Entity ([dec]) Registration failed 

Explanation    RFS ISSU entity registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu entities command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-IPC_GET_BUFFER: RFS issu ipc get buffer failed 

Explanation    RFS ISSU IPC get buffer has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-LOCATE_PORT: RFS locates port ([chars]) failed 

Explanation    RFS ISSU port location has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show ipc port command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-MSGGROUP_REG: RFS Msg Group ([dec]) for Entity ([dec]) 
Registration failed 

Explanation    RFS ISSU message group registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message groups command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-MSG_MTU: RFS Client ([dec]) get msg mtu failed. Error = [dec] 

Explanation    RFS ISSU client get message MTU has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu fsm command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-MSG_RCV: RFS Client ([dec]) receive msg failed. Error = [dec] 

Explanation    RFS ISSU client receive message has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-MSGTYPE_REG: RFS Msg Type for Entity ([dec]) Registration 
failed 

Explanation    RFS ISSU message type registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu message types command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-MSG_XMIT: RFS Client ([dec]) send msg failed. Error = [dec] 

Explanation    RFS ISSU client send message has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-NEGO_COMP: RFS nego is not compatible ([dec]) 

Explanation    RFS ISSU start shared negotiation session has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-NEGO_SESSION_REG: RFS nego session for Entity ([dec]) 
Registration failed 

Explanation    RFS ISSU shared negotiation session registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-NEGO_SESSION_UNREG: RFS session ([dec]) Un-Registration failed 

Explanation    RFS ISSU shared negotiation session unregistration failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-OPEN_ACTIVE_PORT: RFS open active port ([chars]) failed 

Explanation    The RFS ISSU client was unable to open an active port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show ipc port command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-OPEN_CLIENT_PORT: RFS open client port (%s) failed 

Explanation    The RFS ISSU client was unable to open a client port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show ipc port commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-OPEN_SERVER_PORT: RFS open server port (%s) failed 

Explanation    The RFS ISSU client was unable to open a server port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show ipc port commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-OPEN_STANDBY_PORT: RFS open standby port ([chars]) failed 

Explanation    The RFS ISSU client was unable to open a standby port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RECEIVE_NEGO_FAILED: RFS receive nego message ([dec]) failed 

Explanation    RFS ISSU receive negotiation message has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RECEIVE_NEGO_NOT_DONE: RFS receive nego message is not done 
([dec]) 

Explanation    RFS ISSU receive negotiation message is not done.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-REG_PORT: RFS reg port ([dec]) failed 

Explanation    RFS ISSU register port has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show ipc port command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RFS_BOOL_CREATE_ERR: %s. 

Explanation    The RFS redundancy facility (RF) client detected an error when creating a watched boolean.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RFS_ISSU_NEGO_PROCESS: RFS create rfs_issu_start_port watch 
boolean failed 

Explanation    RFS ISSU create negotiation process has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RFS_ISSU_START_PORT: RFS create rfs_issu_start_port watch 
boolean failed 

Explanation    The RFS ISSU client was unable to create anrfs_issu_start_port watched boolean.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RFS_ISSU_START_SESSION: RFS create rfs_issu_start_session 
watch boolean failed 

Explanation    The RFS ISSU client was unable to create anrfs_issu_start_session watched boolean.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RFS_RF_PROG_ERR: %s %d. 

Explanation    The RFS RF client detected an error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-RFS_RF_PROG_NOT_SENT_ERR: %s. 

Explanation    The RFS RF client detected an error when sending a client progression.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-SEND_NEGO_MESSAGE: RFS send nego message ([dec]) failed 

Explanation    RFS ISSU send negotiation message has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-START_NEGO_SESSION: RFS start shared nego session ([dec]) 
failed: [dec] 

Explanation    RFS ISSU start shared negotiation session has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu sessions command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RFS-3-UNREG_ENTITY: RFS ISSU Client unreg entity failed. 

Explanation    The RFS ISSU client unregister entity has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show issu command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RFS_ISSU Messages

This section contains remote file system in-service software upgrade (ISSU) messages.

RFS_ISSU-3

Error Message    %RF_ISSU-3-INVALID_SESSION: RF ISSU client does not have a valid 
registered session. 

Explanation    The redundancy facility (RF) ISSU client does not have a valid registered session.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, show issu capability entries, show issu session, and show issu negotiated capability commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-RF_CAP_INVALID_SIZE: RF ISSU client capability list is 
empty. 

Explanation    The RF ISSU capability list is empty, which is an invalid condition.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show issu capability entries commands and your pertinent troubleshooting logs.

Error Message    %RF_ISSU-3-RF_CAP_RESULT_INCOMP: RF ISSU client capability exchange 
result incompatible. 

Explanation    Based on the results of the capability exchange, the RF ISSU client is not compatible with the peer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging, show tech-support, show logging, and show issu negotiated capability commands and your pertinent troubleshooting logs.

RITE Messages

This sections contains IP traffic export messages.

RITE-5

Error Message    %RITE-5-ACTIVATE: Activated IP traffic export on interface [chars] 

Explanation    IP traffic export has been enabled on the specified interface.

Recommended Action    No action is required.

Error Message    %RITE-5-DEACTIVATE: Deactivated IP traffic export on interface [chars] 

Explanation    IP traffic export has been disabled on the specified interface.

Recommended Action    No action is required.

Error Message    %RITE-5-MODIFIED: Changed IP traffic export outbound interface from 
[chars] to [chars] 

Explanation    The outbound interface for IP traffic export has been changed.

Recommended Action    No action is required.

RMON Messages

This section contains Remote Monitoring (RMON) messages.

RMON-5

Error Message    %RMON-5-HCFALLINGTRAP: Falling trap is generated because the value of 
%s has fallen below the falling-threshold hc value %llu 

Explanation    A falling trap was generated. The value of the specified MIB object fell below the falling threshold value as configured by the rmon hc-alarms command for the specified object.

Recommended Action    Take the appropriate action on the specified MIB object.

Error Message    %RMON-5-HCRISINGTRAP: Rising trap is generated because the value of %s 
exceeded the rising-threshold hc value %llu 

Explanation    A rising trap was generated. The value of the specified MIB object exceeded the rising threshold value as configured by the rmon hc-alarms command for the specified object.

Recommended Action    Take the appropriate action on the specified MIB object.

ROllBACK-ISSU Messages

ROLLBACK-ISSU-2

Error Message    %ROLLBACK_ISSU-2-GET_BUFFER: Rollback ISSU client failed to get buffer 
for message. Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client failed to get buffer space for building a negotiation message. A negotiation message cannot be sent to the standby device. If a problem occurs with the ISSU session negotiation, the standby device cannot be brought up properly.

Recommended Action    Issue the show logging and show checkpoint client command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-2-INIT: Rollback ISSU client initialization failed to 
[chars]. Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client could not be initialized. This initialization failure must be addressed before in-service software upgrade or downgrade can be performed successfully. If you do not address this failure, there will be downtime during software upgrade or downgrade.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-2-SEND_NEGO_FAILED: Rollback ISSU client failed to send 
negotiation message. Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client failed to send a session negotiation message to the peer device. If a problem occurs with the ISSU session negotiation, the standby device cannot be brought up properly.

Recommended Action    Issue the show logging and show checkpoint client command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-2-SESSION_NEGO_FAIL_START: Failed to start Rollback 
ISSU session negotiation. Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client failed to start session negotition. If a problem occurs with the ISSU session start, the standby device cannot be brought up properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-2-SESSION_REGISTRY: Rollback ISSU client failed to 
register session information. Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client failed to register session information. If a problem occurs with the ISSU session registration, the standby device cannot be brought up properly.

Recommended Action    Issue the show issu capability entries and show issu session and show issu negotiated capability command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

ROLLBACK-ISSU-3

Error Message    %ROLLBACK_ISSU-3-INVALID_SESSION: Rollback ISSU client does not have 
a valid registered session. 

Explanation    The Rollback ISSU client does not have a valid registered session.

Recommended Action    Issue the show issu capability entries and show issu session and show issu negotiated capability command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-3-MSG_NOT_OK: Rollback ISSU client 'Message Type [dec]' 
is not compatible 

Explanation    The Rollback ISSU client received an incompatible message from the peer device. The message cannot be processed.

Recommended Action    Issue the show issu message group and show issu session and show issu negotiated version command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-3-MSG_SIZE: Rollback ISSU client failed to get the MTU 
for Message Type [dec].Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client failed to calculate the MTU for the specified message. The Rollback ISSU client is not able to send the message to the standby device.

Recommended Action    Issue the show issu message group and show issu session and show issu negotiated version command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-3-SESSION_UNREGISTRY: Rollback ISSU client failed to 
unregister session information. Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client failed to unregister session information.

Recommended Action    Issue the show issu capability entries and show issu session and show issu negotiated capability command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %ROLLBACK_ISSU-3-TRANSFORM_FAIL: Rollback ISSU client [chars] 
transform failed for 'Message Type [dec]'. Error: [dec] ([chars]) 

Explanation    The Rollback ISSU client could not transform the specified message type. If the transmit transformation failed, the checkpoint message was not sent to the standby device. If the receive transformation failed, the checkpoint message was not applied on the standby device. In both cases, the Rollback state between the active device and the standby device is not identical.

Recommended Action    Issue the show issu session and show issu negotiated version command to gather data that may help identify the nature of the error. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

ROUTEMAP Messages

This section contains route map messages.

ROUTEMAP-4

Error Message    %ROUTEMAP-4-BADTRACKOBJECTTYPE: can't track this type of object 

Explanation    Route maps only support STATE type track objects. This object is not a STATE object.

Recommended Action    Reconfigure the track object to make it a STATE object.

RPC Messages

This section contains Remote Procedure Call (RPC) messages.

RPC-2

Error Message    %RPC-2-6: Recovered from RPC send failure for request [chars]. 
Resending request. 

Explanation    A communication error occurred during an RPC request. RPC will retry.

Recommended Action    This is an informational message only. No action is required.

Error Message    %RPC-2-CORE_SAT_RPC_FAIL: RPC between Core and Remote Switch - [chars] 
failed (non-fatal)Expected when VSL goes down

Explanation    A nonfatal communication error occurred during an RPC request between the core and a remote switch or vice versa. This error message is not considered a failure when the virtual switch link (VSL) goes down.

Recommended Action    No action is required.

Error Message    %RPC-2-FAILED: Failed to send RPC request [chars] (fatal) 

Explanation    A fatal communication error occurred during an RPC request.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RPC-2-FAILED_RETRY: Failed to send RPC request [chars] (will try 
again) 

Explanation    A communication error occurred during an RPC request. The system will attempt the RPC request again.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RPC-2-FAILED_USERHANDLE: Failed to send RPC request [chars] 

Explanation    A communication error occurred during an RPC request.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RPC-2-RETRY: Recovered from RPC send failure for request [chars].  
Resending request. 

Explanation    A communication error occurred during an RPC request.

Recommended Action    The RPC will retry the request. If the message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RPF Messages

This section contains multicast Reverse Path Forwarding (RPF) messages.

RPF-3

Error Message    %RPF-3-RTAVLDELETE: Error deleting an rpf entry from the multicast rpf 
tree 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RPF-3-RTAVLINSERT: Error inserting a new rpf entry into the multicast 
rpf tree

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RPF-4

Error Message    %RPF-4-AVLDELETE: Error deleting an rpf entry from the multicast rpf 
tree 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RPF-4-AVLINSERT: Error inserting a new rpf entry into the multicast 
rpf tree 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RPF-4-SNMP_RADIX_ERR: Failed to [chars] snmp node [chars] snmp radix 
tree for multicast group (*, [IP_address]). 

Explanation    An error occured while adding or deleting snmp node in snmp radix tree when mroute is created or deleted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

RP_MLP Messages

This section contains route processor Multilink Point-to-Point Protocol (RP_MLP) messages.

RP_MLP-3

Error Message    %RP_MLP-3-ADJ_FAIL: Adjacency walk for [chars] failed 

Explanation    An adjacency update for the specified multilink interface failed.

Recommended Action    Reset the multilink interface by entering the shutdown command followed by the no shutdown command on the interface. If traffic does not resume, collect the output of the show adjacency internal and show cef interface internal commands. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RP_MLP-3-INCOMPATIBLELINK: The current config cannot be supported as 
link([chars]) [chars] for bundle ([chars]) 

Explanation    When using multilink, the following restrictions must be met:

- All the links should be from the same port.
- Non-channelized T3 interfaces are not supported on multilink.
- Any added link should be compatible with the existing links in the bundle.
- All the links should be distributed.

Recommended Action    Modify the configuration so that the restrictions are not violated.

Error Message    %RP_MLP-3-UNSUPPORTEDCONFIG: The current config cannot be supported as 
[chars] for [chars] 

Explanation    When using multilink on hardware-assisted SPAs, the maximum number of links in the bundle and number of bundles should not exceed the maximum permissible by device. Refer to the product documentation for restrictions.

Recommended Action    Modify the configuration so that it does not violate the restrictions.

RP_MLP-4

Error Message    %RP_MLP-4-DLFIONELINKSUPPORT: Only ONE link should be configured for 
dLFI bundle!! 

Explanation    The system attempted to configure more than one link for the Distributed Link Fragmentation and Interleaving (dLFI) bundle interface. The dLFIoFR and the dLFIoATM do not support configuring more than one link.

Recommended Action    No action is required.

RP_MLP-5

Error Message    %RP_MLP-5-SPAWARNING: Feature support switching to LC based software 
for [chars] as [chars] 

Explanation    A link was added to the bundle, but it is not on the same bay as other member links of the bundle. The specified link that is not on the same bay has become active, and the bundle has been switched to line card-based software support instead of the hardware mode that is supported on FREEDM.

Recommended Action    When a link is added to a bundle, ensure that it is on the same bay as the other member links of the bundle, in order to have the MLP bundle in hardware mode supported on FREEDM.

RSP Messages

This section contains Route Switch Processor (RSP) messages.

RSP-3

Error Message    %RSP-3-NORELOAD: reload command not allowed on standby RSP 

Explanation    The reload command in privileged EXEC mode is not allowed on the standby RSP.

Recommended Action    Enter the slave reload command in privileged EXEC mode to reload the standby RSP.

Error Message    %RSP-3-PA_INIT: Malloc to [chars] failed for slot [dec] bay [dec] 

Explanation    The information structure for the port adapter could not be created. The interfaces on the specified port adapter might no longer be functional. A possible reason for this is a memory allocation failure involving the port adapter. This can occur as a result of insufficient hardware memory or a memory leak.

Recommended Action    Confirm that the recommended amount of memory is installed for the platform. If memory is adequate, obtain the output of the show process memory command over time to determine the process using increased memory. As an immediate possible solution, attempt to reseat the line card. If this condition persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RSP-4

Error Message    %RSP-4-CRASHINFO: Error saving crashinfo for slot [dec]. Reason: 
[chars] 

Explanation    A VIP crash information file has not been saved due to the indicated reason.

Recommended Action    If the reason indicates Out of space, the bootflash may not have sufficient memory to save the crashinfo file. Otherwise, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RSP-6

Error Message    %RSP-6-TXSTUCK: Txacc of Interface [chars] is at [dec]% of its txlimit 

Explanation    The specified interface has a low TXACC value. This might be a transient condition and might be harmless if it occurs during periods of high packet traffic. If this condition is detected more than once during periods of relatively moderate traffic, it could indicate a problem. Distributed packet switching might be disrupted as a result of this condition.

Recommended Action    If the message recurs during periods of relatively moderate traffic, this might indicate a disruption in distributed packet switching. If such a disruption occurs, enter the microcode reload command to recover. Open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

RSVP Messages

This section contains RSVP protocol messages.

RSVP-1

Error Message    %RSVP-1-RSVP_AUTH_NO_KEYS_LEFT: No valid keys left for [IP_address] 

Explanation    The router attempted to use a key in an RSVP key chain but discovered that all the keys in the chain have expired and no other per-neighbor or per-interface keys are available for the specified neighbor. The router will continue to use the last key in the chain rather than revert to an unauthenticated condition. However, the specified neighbor router may start discarding RSVP messages as a result, and reservations with that neighbor may eventually time out.

Recommended Action    Update the key chain by updating the text and expiration times for the expired keys.

RSVP-2

Error Message    %RSVP-2-RSVP_AUTH_KEY_CHAIN_EXPIRED: All the keys in chain [chars] 
have expired - please update the key chain now 

Explanation    The router attempted to use a key in an RSVP key chain but discovered that all the keys in the chain have expired. The router will attempt to find another suitable key. If no other suitable per-neighbor key can be found, the router will attempt to use key (chain) configured for the interface over which the authenticated RSVP message is being sent or received.

Recommended Action    Update the key chain by updating the text and expiration time(s) for the expired key(s).

RSVP-3

Error Message    %RSVP-3-BAD_RSVP_MSG_RCVD_AUTH_COOKIE: [chars] message from 
[IP_address] discarded - challenge failed for key ID [chars] 

Explanation    The router sent an RSVP message to challenge the untrusted source to compute a secure hash on a random piece of data and return the hash with the same data, but the source did not return the expected data. RSVP discarded the response because the untrusted source may be (unsuccessfully) attempting an RSVP challenge response replay attack.

Recommended Action    If you can verify that the source is trusted, it is possible that the source has malfunctioned; in this case, copy the error message exactly as it appears on the console or in the system log, enter the show tech-support rsvp command to gather data that may help identify the cause of the error, and send this information to your Cisco technical support representative. Otherwise, try to find and disable the untrusted source.

Error Message     RSVP-3-BAD_RSVP_MSG_RCVD_AUTH_DIGEST: [chars] message from 
[IP_address] discarded - incorrect message digest 

Explanation    The router received an RSVP message that contained a different secure hash from the one computed by the router. RSVP discarded the message because the message may have come from an untrusted source.

Recommended Action    Check the configuration on the router and the sending system to make sure that they are using the correct security key and secure hash algorithm.

Error Message    %RSVP-3-BAD_RSVP_MSG_RCVD_AUTH_DUP: [chars] message from [IP_address] 
discarded - authentication seq #[int] is a duplicate 

Explanation    The router received an RSVP message with an authentication sequence number that has already been seen. RSVP discarded the message because an untrusted source may be (unsuccessfully) attempting an RSVP message replay attack.

Recommended Action    If you can verify that the source is trusted, it is possible that the source has rebooted and its clock has gone backward in time; in this case, the source should be configured to synchronize its clock with an NTP server. Otherwise, the sender might be an untrusted source (unsuccessfully) attempting an RSVP message replay attack. Try to locate and disable the untrusted source.

Error Message    %RSVP-3-BAD_RSVP_MSG_RCVD_AUTH_NO_SA: [chars] message from 
[IP_address] discarded: no security association for [IP_address] - no RSVP 
security key configured or no memory left. 

Explanation    The router received an RSVP message that contained a secure hash but dropped the message because the router was not able to create a security association for the sending system.

Recommended Action    Check the configuration on the router to make sure that RSVP has access to a security key for the sending system. If such a key is configured, then check to see if the router has run out of memory.

Error Message    %RSVP-3-BAD_RSVP_MSG_RCVD_AUTH_WIN: [chars] message from [IP_address] 
discarded - seq #[int] outside authentication window 

Explanation    The router received an RSVP message whose authentication sequence number is less than the lower limit of the out-of-order window. RSVP discarded the message because an untrusted source may be (unsuccessfully) attempting an RSVP message replay attack.

Recommended Action    It is possible that a trusted source is sending a burst of reordered RSVP messages that is too large for the authentication window size. If you can verify that the source is trusted and its messages are being sent in large reordered bursts, use the ip rsvp authentication window-size command to increase the window size on the receiving router. It is also possible that a trusted source has rebooted and its clock has gone backward in time; in this case, the source should be configured to synchronize its clock with an NTP server. Otherwise, the sender could be an untrusted source (unsuccessfully) attempting an RSVP message replay attack; try to find and disable the untrusted source.

Error Message    %RSVP-3-RSVP_MFI_RECOVERY: RSVP calculated Recovery Time is longer 
than TE Rewrite Hold-Time registered with LSD. Some LSPs may not be be recovered. 

Explanation    Traffic engineering (TE) registered a maximum cutover time with the label switching database (LSD) that is less than the time it may actually take to recover all LSPs. As a result, more than usual traffic loss may occur on some LSPs during recovery.

Recommended Action    Make note of the number of checkpointed LSPs in the RSVP HA database by entering the show ip rsvp high-availability database internal command. This number likely exceeds the hard-defined limit of the number of recoverable LSPs. Provide this information to your Cisco technical support representative.

Error Message    %RSVP-3-RSVP_MSG_AUTH_CHALLENGE_TIMEOUT: No response to challenge 
issued to [IP_address] for key ID [chars] 

Explanation    The router sent an RSVP message to challenge the untrusted source to compute a secure hash on a random piece of data and return the hash with the same data, but the source did not reply. The source may have crashed or lost its network connection. However, it is also possible that the source was (unsuccessfully) attempting to replay an RSVP message before the challenge and gave up when it saw the challenge from the router.

Recommended Action    If you can verify that the source is trusted, try to determine if it has crashed or lost its network connection, and then restore network connectivity to it. If the source repeatedly crashes when challenged, a temporary workaround might be to disable challenges on the router by entering the no ip rsvp authentication challenge command until the problem on the source is resolved. Otherwise, assume the source is untrusted. Try to locate and disable it.

Error Message    %RSVP-3-RSVP_MSG_AUTH_TYPE_MISMATCH: [chars] message from 
[IP_address] discarded - authentication algorithm mismatch 

Explanation    The router received an RSVP message from a source that required authentication but the received message was using the wrong authentication algorithm.

Recommended Action    Enter the show ip rsvp authentication detail source command on the router to display the expected algorithm type. Locate the source and change its configuration to match.

RSVP-4

Error Message    %RSVP-4-RSVP_AUTH_DUPLICATE_KEY_ID: Key chains [chars] and [chars] 
contain duplicate key ID [int] 

Explanation    An attempt is being made to add a new key identifier to a key chain in the router configuration but RSVP detected that this identifier is found in another key chain already assigned to RSVP. Becaue key identifiers must be unique across all the key chains used by RSVP, RSVP will not use the keys with this identifier in all such key chains. This could cause RSVP authentication to fail in some cases.

Recommended Action    Update the listed key chain(s) so they use different key identifiers.

RSVP-5

Error Message    %RSVP-5-RSVP_AUTH_KEY_ACL_CHANGE: Key chain [chars] [chars] for 
[IP_address] because ACL "[chars]" [chars] 

Explanation    The ACL specified in the message text associates the key chain specified in the message text with a set of RSVP neighbors. RSVP uses the specified key chain to authenticate each RSVP message exchanged with that set of RSVP neighbors after the association is configured. Subsequently, the specified ACL has been reconfigured such that the key chain association is no longer valid for one or more RSVP neighbors in the set. This causes RSVP to search the configuration for another suitable key chain to use with those neighbors. If no such key chain is found, RSVP will no longer be able to provide authentication for messages exchanged with those RSVP neighbors. This causes RSVP to discard RSVP messages from that set of neighbors. Because this may ultimately lead to loss of RSVP functionality with those neighbors, RSVP generates this system message. This system message may also be generated if the ACL is subsequently changed so that it reassociates RSVP neighbors with the specified key chain. If RSVP is not using another key chain for the set of RSVP neighbors specified by the ACL, RSVP will begin using the specified key chain to exchange authenticated RSVP messages with that set of RSVP neighbors, potentially restoring RSVP functionality with those neighbors.

Recommended Action    If the ACL change unexpectedly caused authentication to be disabled or enabled for one or more RSVP neighbors, undo the ACL change so that RSVP authentication is not impacted.

Error Message    %RSVP-5-RSVP_AUTH_ONE_KEY_EXPIRED: Key (ID) [int] in chain [chars] has 
expired 

Explanation    The router has detected that one key in a RSVP key chain has expired and that RSVP has switched to the next unexpired key in that chain.

Recommended Action    Update the key chain by changing the text and expiration time(s) for the expired key.

RSVP_HA Messages

This section contains RSVP high availability (HA) protocol messages.

RSVP_HA-3

Error Message    %RSVP_HA-3-CF_REGISTER_FAILED: Failed to register with CF 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process and reregister with compact flash (CF).

Error Message    %RSVP_HA-3-CLI_ADD_FAILED: Failed to add RSVP HA to CLI 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process and reregister with compact flash (CF).

Error Message    %RSVP_HA-3-DB_INIT_FAILED: Database init failed 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process and reregister with compact flash (CF).

Error Message    %RSVP_HA-3-ENTRY_MOVE_FAILED: Failed to move a database entry to 
[chars] tree 

Explanation    An internal error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RSVP_HA-3-ISSU_INIT_FAILED: In Service Software Upgrade (ISSU) Init 
failed 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process and reregister with compact flash (CF).

Error Message    %RSVP_HA-3-ITEM_SIZE_TOO_BIG: Item size ([int]) bigger than default CF 
buffer ([int]) 

Explanation    An internal error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RSVP_HA-3-MAIN_INIT_FAILED: Main init failed 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process and reregister with compact flash (CF).

Error Message    %RSVP_HA-3-MSG_MGR_INIT_FAILED: Message Manager init failed 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process and reregister with compact flash (CF).

Error Message    %RSVP_HA-3-PROCESS_CREATE_FAILED: Failed to create RSVP HA process 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process.

Error Message    %RSVP_HA-3-PROCESS_KILL: Killing RSVP HA process 

Explanation    The RSVP HA process is terminating.

Recommended Action    No action is required.

Error Message    %RSVP_HA-3-RF_REGISTER_FAILED: Failed to register with RF 

Explanation    The system may be low on memory.

Recommended Action    Verify system memory availability. Deconfigure graceful restart full mode and configure it again. This will attempt to restart the RSVP HA process and reregister with compact flash (CF).

Error Message    %RSVP_HA-3-RF_UNREGISTER_FAILED: Failed to unregister with RF 

Explanation    The RSVP HA client may not have registered with RF.

Recommended Action    No action is required.

RTT Messages

This section contains round-trip time monitor messages.

RTT-3

Error Message    %RTT-3-PathSetupFailed: %RTR Probe [int]: Error in setting current 
Path. Probe will be stopped 

Explanation    An internal software error has occurred.

Recommended Action    Reschedule the probe operation that was stopped. Copy the message exactly as it appears on the console or in the system log. Enter the show rtr configuration command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RTT-3-SAAMPLS: IP SLA Monitor([dec]): SAA MPLS [chars] Probe [chars] 
[chars] for destination-address [IP_address] lsp-selector [IP_address] 

Explanation    This informational message logs violations in the Service Assurance Agent probes. This message appears after the rtr logging trap command has been entered.

Recommended Action    If this message is not necessary, enter the no rtr logging trap command to disable logging. Otherwise, no action is required.

Error Message    %RTT-3-SAANEGATIVEVALUE: IP SLA Monitor([dec]): Negative Value for 
[chars] 

Explanation    The IP SLA monitor statistics generated an error message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RTT-3-SAANOPROCESS: IP SLA Monitor: Cannot create a new process 

Explanation    The IP SLA monitor is unable to start a new process, and may not be running.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %RTT-3-SAAPROBENOTFOUND: IP SLA Monitor: Error deleting the probe 

Explanation    A deletion attempt was performed on a probe that does not exist.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RTT-3-SAARESPTWINITFAIL: IP SLAs responder initialzation failed 

Explanation    The IP Service Level Agreement (IP SLA) responder initialization process was unable to initialize the timer wheel. As a result, the IP SLA probes on other routers for which this router acts as responder will not work.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RTT-3-SAATWINITFAIL: IP SLAs: Generic Timer wheel timer functionality 
failed to initialize 

Explanation    IP SLAs could not initialize the timer wheel.

Recommended Action    Search for resolved software issues using the Bug Toolkit at Active

Explanation    This message is generated only when SGBP errors or events debugging is enabled. This indicates that a link to another SGBP member has completed the interactions to set it up and is now entering the active state.

Recommended Action    No action is required.

RTT-4

Error Message    %RTT-4-DuplicateEvent: IP SLA Monitor [dec]: Duplicate event received. 
Event number [dec] 

Explanation    The IP SLA monitor process has received a duplicate event.

Recommended Action    This is only a warning message. If this message recurs, copy the message exactly as it appears on the console or in the system log. Enter the show rtr configuration command to gather data that may help identify the cause of the error.Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered along with information about the application that is configuring and polling the Service Assurance Agent probes. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %RTT-4-OPER_CLOSS: condition %s, entry number = %d 

Explanation    This message displays connection loss conditions in the IP Service Level Agreement (IP SLA) operations. This message is enabled when the ip sla monitor logging trap command is entered.

Recommended Action    Ensure that the destination for the IP SLA operation is reachable and that the IP SLA responder operation is configured on the destination. To disable these messages for IP SLA operations, enter the no ip sla monitor logging trap command.

Error Message    %RTT-4-OPER_TIMEOUT: condition %s, entry number = %d 

Explanation    The timeout condition is displayed for the IP SLA operations. This message is enabled when the ip sla monitor logging trap command is entered.

Recommended Action    Ensure that the destination for the IP SLA operation is reachable. To disable these messages for IP SLA operations, enter the no ip sla monitor logging trap command.

Error Message    %RTT-4-SAACLOCKNOTSET: IP SLA Monitor Probe(s) could not be scheduled 
because clock is not set. 

Explanation    One or more IP SLA monitor probes could not be scheduled because the system clock is not set.

Recommended Action    Ensure that the system clock is functional by using Network Time Protocol or another mechanism.

Error Message    %RTT-4-SAAGRPSCHEDCONFIGFAIL: Group Schedule Entry [dec]: [chars] 

Explanation    The probes could not be group scheduled. Either the configured starting time has already occurred, or the starting time is invalid.

Recommended Action    Reschedule the group scheduling entry with a valid start time.

Error Message    %RTT-4-SAASCHEDCONFIGFAIL: IP SLA Monitor Probe [dec]: [chars] 

Explanation    The IP SLA Monitor probe could not be scheduled. Either the configured starting time has already occurred, or the starting time is invalid.

Recommended Action    Reschedule the failed probe with a valid start time.

RTT-6

Error Message    %RTT-6-SAATHRESHOLD: IP SLA Monitor([dec]): Threshold [chars] for 
[chars] 

Explanation    This informational message logs threshold violations in the Service Assurance Agent probes. This messages appears after the rtr logging trap command has been entered.

Recommended Action    If this message is not necessary, enter the no rtr logging trap command to disable logging. Otherwise, no action is required.

RUNCFGSYNC Messages

This section contains Auto-Running Configuration Synchronization (RUNCFGSYNC) messages.

RUNCFGSYNC-6

Error Message    RUNCFGSYNC-6-HASRMSTATE: [chars] 

Explanation    HA single router mode has changed state. Additional details are provided in the error message text.

Recommended Action    No action is required.

SASL Messages

This section contains Simple Authentication and Security Layer (SASL) messages.

SASL-2

Error Message    %SASL-2-FORKFAIL: Cannot fork process [chars] 

Explanation    An attempt to fork a process has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SASL-2-INITFAIL: Initialization failed - [chars] 

Explanation    SASL component initialization failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SATVS_DNLD Messages

This section contains satellite switch virtual switch (VS) download messages.

SATVS_DNLD-3

Error Message    %SATVS_DNLD-3-RS_BOOT_RDY_MEM_FAIL: Unable to allocate space for 
BOOT_READY msg 

Explanation    The remote switch failed to allocate memory for a BOOT READY message to the virtual switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_BOOT_RDY_SEND_FAIL: Unable to send BOOT_READY message 

Explanation    The Remote Switch failed in sending a BOOT READY message to the Virtual Switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_DNLD_BAD_EVENT: Got invalid event [hex]:[hex] 

Explanation    An invalid event was received.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_DNLD_BAD_QUEUE_EVENT: Event on bad queue [hex] 

Explanation    An unknown message queue event was received.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_DNLD_BAD_TIMER_EVENT: Invalid timer [hex] 

Explanation    An invalid event was received or the message queue was unknown.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_DNLD_CREATE_PROC_FAIL: Failed to create image 
download process 

Explanation    Failed to create a message queue on the remote switch for downloading related messages from the virtual switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_DNLD_CREATE_QUEUE_FAIL: Failed to created watched 
queue for download messages 

Explanation    Failed to create a message queue on the remote switch for downloading related messages from the virtual switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_DNLD_FAILED: Failed to start download from the 
Virtual Switch ([chars]) 

Explanation    The remote switch was unable to initiate a download from the virtual switch. This could be because of problems in the RSL.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_DNLD_PROC_FAIL: Download rocess killed. So dropping 
dnld data 

Explanation    The download process is not running on the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-RS_MSG_ENQUEUE_FAIL: Unable to enqueue message 

Explanation    Failed to enqueue a message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_BOOT_MSG_INVALID_SWITCH: Invalid switch_id 
(Internal) [dec] (switch number [dec])! Droppping BOOT_READY msg 

Explanation    An invalid BOOT RDY message was received at the virtual switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_BOOT_RDY_RESP_MEM_FAIL: Unable to allocate memory for 
BOOT_READY response for [chars] [dec] 

Explanation    The virtual switch failed to allocate memory to send a BOOT READY response message to the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_BOOT_RDY_RESP_SEND_FAIL: Unable to send BOOT_READY 
response to [chars] [dec] 

Explanation    The virtual switch was unable to send a BOOT READY response message to the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_BOOT_RDY_SCP_RESP_FAIL: scp_send_pak() returned 0 
for BOOT_READY resp for [chars] [dec] 

Explanation    The virtual switch was unable to send a valid BOOT READY response message to the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_CREATE_DNLD_INSTANCE_FAIL: Failed to create a 
download instance for [chars] [dec] 

Explanation    An internal error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_CREATE_DNLD_PROC_FAIL: Failed to create a download 
process for [chars] [dec] 

Explanation    An internal error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_DNLD_IMAGE_INFO_FAIL: Unable to get image info for 
[chars] [dec] 

Explanation    Failed to get image information for the remote switch from the bundled image.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_DNLD_IMAGE_VER_INFO_FAIL: Unable to get version for 
[chars] [dec] 

Explanation    Failed to get image version information for the remote switch from the bundled image.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_DNLD_UNKNOWN_RS: Unknown RS type [dec] for [chars] 
sup [dec] 

Explanation    An unknown type of hardware was detected on the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_GET_DNLD_IMAGE_FAIL: Unable to get image for [chars] 
[dec] 

Explanation    Failed to get image information to be downloaded to the remote switch from the internal database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_GET_DNLD_INSTANCE_FAIL: Failed to get the download 
process instance for Remote Switch 

Explanation    An internal error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_GET_PSLOT_FAIL: Unable to get the physical slot for 
the Remote Switch in virtual slot [dec] 

Explanation    Failed to get physical slot for the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_IMAGE_DNLD_FAIL: Image download of size ([dec]) 
failed for [chars] [dec] 

Explanation    The virtual switch failed to download the image to the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_INVALID_BOOT_MSG: BOOT_READY message in ONLINE state 
for [chars] [dec]. NAKing 

Explanation    The virtual switch received an invalid BOOT RDY message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_RS_REGISTRY_ADD_FAIL: [chars] registry addition 
failed. 

Explanation    Failed to create registries during initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_SET_DNLD_INSTANCE_FAIL: Failed to set the download 
process instance for [chars] [dec] 

Explanation    An internal error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_DNLD-3-VS_VLSOT_ALLOC_FAIL: Unable to allocate vslot for 
[chars] [dec] slot [dec] 

Explanation    Failed to allocate a virtual slot to the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SATVS_IBC Messages

This section contains satellite switch virtual switch (VS) interboard communications messages.

SATVS_IBC-3

Error Message    %SATVS_IBC-3-VS_IBC_PVTPOOL_PAKALLOC_FAIL: Unable to allocate Pak from 
VS Inband Private buffer Pool: [chars] Allocating from Public Buffer Pool 

Explanation    Inband packet allocation could not be done from the virtual switch link (VSL) inband private buffer pool due to the reason stated.

Recommended Action    No action is required.

Error Message    %SATVS_IBC-3-VSL_DOWN_IP_DROP: VSL inactive - dropping cached 
IP-over-EoBC packet: (SA/DA:[hex]/[hex], eSA/eDA:[enet]/[enet]) 

Explanation    The VSL is no longer active. The other virtual switch to which the VSL was attached had one or more IP-over-EoBC packets remaining in the cache after the VSL became inactive (down). The cached IP-over-EoBC packets are being dropped. This condition indicates normal system operation.

Recommended Action    No action is required.

Error Message    %SATVS_IBC-3-VSL_DOWN_SCP_DROP: VSL inactive - dropping cached SCP 
packet: (SA/DA:[hex]/[hex], SSAP/DSAP:[hex]/[hex], OP/SEQ:[hex]/[hex], 
SIG/INFO:[hex]/[hex], eSA:[enet]) 

Explanation    The VSL is no longer active. The other virtual switch to which the VSL was attached had one or more SCP packets remaining in the cache after the VSL became inactive (down). The cached SCP packets are being dropped.

Recommended Action    No action is required.

SATVS_IBC-5

Error Message    %SATVS_IBC-5-VSL_DOWN_IPC_DROP: VSL inactive - dropping cached IPC 
packet: (SA/DA:[hex]/[hex], SEQ:[hex], Pak_pointer: [hex]) 

Explanation    The VSL is no longer active. The other virtual switch to which the VSL was attached had one or more IPC packets remaining in the cache after the VSL became inactive (down). The cached IPC packets are being dropped.

Recommended Action    This condition does not affect normal system processing. No action is required.

Error Message    %SATVS_IBC-5-VSL_DOWN_SCP_DROP: VSL inactive - dropping cached SCP 
packet: (SA/DA:[hex]/[hex], SSAP/DSAP:[hex]/[hex], OP/SEQ:[hex]/[hex], 
SIG/INFO:[hex]/[hex], eSA:[enet])

Explanation    The VSL is no longer active. The other virtual switch to which the VSL was attached had one or more SCP packets remaining in the cache after the VSL became inactive (down). The cached SCP packets are being dropped.

Recommended Action    This condition does not affect normal system processing. No action is required.

SATVS_UL_MGMT Messages

This section contains satellite switch virtual switch (VS) messages.

SATVS_UL_MGMT-3

Error Message    %SATVS_UL_MGMT-3-RS_DNLD_ABORT: Image download aborted because RSL 
went down 

Explanation    An ongoing remote switch image download was aborted because the remote switch link (RSL) went down. This condition can be caused by any of the following:

- The port channel forming the RSL was shutdown.
- All members of the port channel have been shutdown.
- The cables hooking to all members have been removed.
- The remote switch was deconfigured.
- The remote switch detected another virtual switch with a a better priority value.

Recommended Action    Check for the above conditions and resolve them. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_HW_PROG_TIMEOUT: H/w programming timed out. 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_INVALID_BNDL_EVENT: Bundle event on already 
bundled port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_INVALID_BOOL_EVENT: Invalid boolean event [hex] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_INVALID_EVENT: [chars]: Invalid event [hex]:[hex] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_INVALID_UNBNDL_EVENT: Unbundle event on already 
unbundled port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_INV_FAILED: Failed to send inventory data to 
Virtual Switch. Will keep trying 

Explanation    The remote switch failed to send inventory data to the virtual switch even though the RSL is up. It will keep trying forever.

Recommended Action    Wait 10 minutes for the system to recover from this condition. If the system does not recover, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_NO_PORT_BNDL_NUMBER: No bundle port number in RSL 
-- SI set to BIT BUCKET 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-RS_NO_UPLINK: No uplink to master core -- SI set to 
BIT BUCKET 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_DEALLOC_VSLOT_MSG_FAIL: [chars] for VS UL dealloc 
vslot msg [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_DROP_INV_MSG: Dropping Inventory message from 
unknown Remote Switch number [dec] switch-id(Internal) [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_DUP_INV_MSG: NAKing duplicate inventory from 
Remote Switch number [dec] switch-id(Internal) [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_GET_PSLOT_FAIL: Unable to get the physical slot of 
supervisor for [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_GET_SWITCH_NUMBER_FAIL: Unable to get switch 
number for switch-id(internal) [dec] 

Explanation    Failed to get switch number from internal switch ID. An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_ICC_REQ_FAIL: Unable to alloc memory for status 
update message for [chars] [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_ICC_RESP_FAIL: icc_get_resp_pak failed 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_ICC_RESP_UPLINK_STATUS_FAIL: icc_req_resp_pak to 
SP failed for [chars] [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_INVALID_BNDL_EVENT: Bundle event on already 
bundled port [chars] for switch number [dec] switch-id(Internal) [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_INVALID_UNBNDL_EVENT: Unbundle event on already 
unbundled port [chars] for switch number [dec] switch-id(Internal) [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_INV_FAILED: Failed to process inventory data for 
Remote Switch [dec]. Will remain OFFLINE 

Explanation    The virtual switch is unable to process the inventory data received from the remote switch even though the RSL is up. This switch will be held offline.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_INV_VER_MISMATCH: Versin of INVENTORY message 
mismatch. Forcing download to switch number [dec] switch-id(internal) [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_NO_INFO_EM_RECOVERY: No PM info on EM recovery for 
port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_NON_INV_MSG: Dropping non-INVENTORY message. 

Explanation    A non-inventory message was received from the remote switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_NON_RSL_EM_AGE: EM aging event on non-RSL port 
[chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_NO_SWIDB_EM_AGE: No swidb for EM aging event (gpid 
= [dec]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_NO_SWIDB_EM_RECOVERY: No swidb for EM recovery 
event (gpid = [dec]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_ADD_PORT_AGPORT_FAIL: Unable to add port 
[chars] to RSL. 

Explanation    A failure occurred while attempting to add the port to the RSL.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_ADD_TLV_FAIL: Too few bytes for [chars] TLV in 
PAgP (reqd. [dec], got [dec]) on port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_BAD_SUB_OPCODE: Dropping bad sub opcode ([hex]) 
from [chars] [dec] 

Explanation    An invalid message was received from the remote switch. The message could be corrupted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_BAD_VER_STR: Bad version string - inventory 
failed 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CF_CLIENT_ADD_FAIL: CF: Failed to create client 
(err_code = [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CF_INVALID_SYNC: CF: TLV sync for unconfigured 
port ([chars]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CHKPT_INVALID_SYNC: CF: Received invalid sync 
type [hex] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CHKPT_MSG_FAIL: CF: Send FAIL status 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CHKPT_MSG_MEM_FAIL: CF: Unable to get chkpt 
buffer for sync type [hex] (retval [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CHKPT_MSG_SEND_FAIL: CF: Unable to sync type 
[hex] to standby (retval [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CLEAR_LTL_INDEX: Unable to clear LTL index 
[hex] (retval [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CREATE_BOOL_FAIL: Failed to create watched 
boolean to monitor uplink comm up 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CREATE_PROC_FAIL: Failed to create the [chars] 
process 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_CREATE_QUEUE_FAIL: Failed to create watched 
queue for [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_ENQUEUE_FAIL: Unable to enqueue unsolicited 
message 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_GET_LTL_PORT_INDEX: Unable to get LTL index for 
port [chars] (retval [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_GET_OID_FAIL: Failed to get OID - inventory 
failed 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_GET_UPLINK_INFO_FAIL: Failed to get uplink info 
for port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_ICC_REQ_FAIL: RP-SP sync: Unable to get memory 
for RP-SP sync type [hex] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_IGNORE_ICS_TLV: Ignore ICS TLV on non-uplink 
port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_IMAGE_NOT_FOUND: The system failed to find an 
image to download to Remote Switch [dec]. Will remain OFFLINE 

Explanation    The virtual switch failed to find an image for the remote switch. The remote switch will remain offline.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_IMAGE_NOT_FOUND_INV_RESP: Remote Switch image 
NOT found in Virtual Switch 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_ARGS: Both [chars] [dec] and idb for 
port ([chars]) specified 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_BOOL_EVENT: Invalid [chars] boolean 
event [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_EVENT: Invalid [chars] event 
[dec]:[dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_ICS_TLV: Invalid ICS TLVs from port 
[chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_QUEUE_EVENT: Event on invalid [chars] 
queue [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_SW_ID: Invalid switch-id(Internal) 
[dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_SWITCH_INFO: switch number [dec] has no 
switch_info 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_TIMER_ID: Invalid [chars] timer [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_TLV: Received [chars] TLV on non-uplink 
port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_TLV_RS: Received Remote Switch side UL 
mgmt TLV on Remote Switch on port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVALID_TLV_VS: Received Virtual Switch side UL 
mgmt TLV on Virtual Switch on port [chars] for [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INVENTORY_FAIL: Out of memory - inventory 
failed 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INV_RESP_FAIL: Failed sending INVENTORY 
response [chars]to [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INV_RESP_MEM_FAIL: Alloc failure for INVENTORY 
response to switch number [dec] switch-id(Internal) [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_INV_SEND_FAIL: Inventory:scp send failed - 
session [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RSL_BOUNCE: Remote switch [dec] OFFLINE since RSL 
bounced 

Explanation    The remote switch is now offline because the remote switch link (RSL) was bounced. This condition can be caused by any of the following:

- An SSO switchover resulted in failures on the RSL line cards that required the RSL to be bounced.
- The remote switch failed to respond to a sanity check request after an SSO switchover.

Recommended Action    Check for the above conditions. Note that the first condition can occur when the switchover happens during a critical operation on the RSL line card. If this is not the case, or if the second condition occurred, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_LTL_ALLOC_FAIL: Dynamic allocation also failed 
for Remote Switch private indices (retval [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_MAX_INV_OID_SIZE: OID too long ([dec]) - 
inventory failed 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NAK_INV_RESP: Virtual Switch NAKed Inventory. 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NON_RSL_CONN_INFO_REQ: Dropping non-RSL 
connect info request message 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NON_UPLINK_PORT_RM: Attempt to remove port 
[chars] that is not an uplink of [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NO_RS_INFO_INV_SYNC: CF: No Remote Switch info 
for inventory sync for [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NO_RS_INFO_STATE_SYNC: CF: No Remote Switch 
info for state sync for [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NOT_ENOUGH_PRIVATE_INDICES: Not enough private 
indices (reqd [dec], got [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NULL_RP_SP_SYNC_MSG: RP-SP sync: Received NULL 
sync msg 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_NULL_SWIDB: Unable to get swidb for port 
[dec]:[dec]. 

Explanation    The specified port has a null software interface descriptor block.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_PO_AGG_RS_OFFLINE: Port [chars] aggregated but 
switch-id(InternaL) [dec] OFFLINE 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_PORT_ADD_REMOVE_ERR: Port ([chars]) add/remove 
from unconfigured [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_REGISTRY_ADD_FAIL: [chars] registry addition 
failed 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_RF_CLIENT_ADD_FAIL: RF: Failed to create client 
(retcode = [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_RSL_CONN_INFO_RESP_FAIL: No RSL connect info 
info response received from [chars] [dec] 

Explanation    The RSL connect information response was not heard from the remote switch. This could be due to an invalid switch number, or the virtual switch may not be actively connected to the remote switch at this time.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_RSL_CONN_INFO_RESP_MSG_FAIL: Unable to alloc 
memory for RSL connect info response 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_RSL_CONN_REQ_MEM_FAIL: Unable to allocate 
memory for sending RSL connect info request to [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_RSL_CONN_RESP_SEND_FAIL: Sending RSL connect 
info response failed. 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_RSL_LTL_INDEX_FAIL: Unable to get the local RSL 
LTL index 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_SET_LTL_INDEX: Unable to [chars] index [hex] on 
supervisor [chars] [chars] (retval [hex]) 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_SET_PORT_LTL_INDEX: Unable to set LTL index for 
port [chars] to [hex] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_SET_RSH_MODE: Unable to set RSH mode on port 
[chars]. 

Explanation    The system failed to set RSH mode.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_SET_SRC_INDICES_FAIL: Failed to [chars] SCP msg 
to set src indices. 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_SSO_EVENT: SSO switchover event in oir_online 
(slot [dec])-- not supported in Remote Switch 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_TLV_INVALID_METRIC: ICS TLV on [dec] with 
invalid metric on port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_RS_VSLOT_ALLOC_FAIL: Unable to alloc vslot for 
switch number [dec] switch-id(Internali) [dec] slot [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-3-VS_UNKNOWN_MSG: Unknown message type [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SATVS_UL_MGMT-4

Error Message    %SATVS_UL_MGMT-4-RS_RS_MISMATCH: Virtual switch indicates software 
mismatch. Requesting download 

Explanation    Because the software running on the remote switch does not match that in the virtual switch, the proper image will be downloaded.

Recommended Action    The image download is automatic. If it fails to complete, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-RS_RS_OFFLINE: Remote switch OFFLINE since RSL went 
down 

Explanation    The remote switch is now offline because the remote switch link (RSL) went down. This condition can be caused by any of the following:

- The port channel forming the RSL was shutdown.
- All members of the port channel have been shutdown.
- The cables hooking to all members have been removed.
- The remote switch was deconfigured.
- The remote switch detected another virtual switch with a a better priority value.

Recommended Action    Check for the above conditions and resolve them. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-VS_GET_PM_COOKIE_FAIL: RF: Unable to get cookie for 
port [chars] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-VS_RS_MAX_UPLINKS_CONF: Attempt to add port [chars] 
to [chars] [dec] that already has [dec] uplinks to it 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-VS_RS_MISMATCH: Remote switch [dec] software version 
mismatch. Forcing download 

Explanation    Because the software that is running on the remote switch does not match the software that is running on the virtual switch, matching software will be downloaded to the remote switch.

Recommended Action    The image download is automatic. If it fails to complete, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-VS_RS_OFFLINE: Remote switch [dec] OFFLINE since RSL 
went down 

Explanation    The remote switch is now offline because the remote switch link (RSL) went down. This condition can be caused by any of the following:

- The port channel forming the RSL was shutdown.
- All members of the port channel have been shutdown.
- The cables hooking to all members have been removed.
- The remote switch was deconfigured.
- The remote switch detected another virtual switch with a a better priority value.
- The remote switch was powered off.
- The remote switch rebooted.

Recommended Action    Check for the above conditions and resolve them. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-VS_RS_REG_READ_FAIL: Unable to read register [hex] of 
port [chars] 

Explanation    The virtual switch failed to read the port adapter registers to verify that RSH is enabled on them.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-VS_RS_RS_CONF: Attempt to [chars]-configure [chars] 
[dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-4-VS_RS_VLAN_BLOCK: Unable to [chars] VLANS [hex] - 
[hex] for [chars] 

Explanation    The system could not block or unblock a range of VLANs.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SATVS_UL_MGMT-5

Error Message    %SATVS_UL_MGMT-5-RS_ICS_SWITCHOVER: ICS swtichover due to priority 
change on RSL member [chars] from Virtual Switch [enet] 

Explanation    The remote switch has detected a priority change at the virtual switches and will do an ICS switchover to a new virtual switch. All RSL members, except the one from which the priority change was detected, will be bounced to allow faster detection of this situation at the virtual switches.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-5-RS_RSL_DOWN: RSL is DOWN 

Explanation    The remote switch link is down.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-5-RS_RSL_UP: RSL is UP 

Explanation    The remote switch link is up.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-5-RS_RSL_UP_INV: RSL is UP. Sending inventory data 

Explanation    The remote switch link is up. The remote switch is sending inventory data to the virtual switch.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-5-RS_RS_ONLINE: Remote switch is ONLINE. Exporting line 
card data to Virtual Switch 

Explanation    The remote switch is now online. The virtual switch will now look for line cards on the remote switch and try to bring them online.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-5-VS_RSL_UP: RSL to Remote Switch [dec] is UP. Waiting 
for inventory data 

Explanation    The remote switch link is up and waiting for inventory from the remote switch.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-5-VS_RS_ONLINE: Remote switch [dec] ONLINE. Looking for 
line cards on it 

Explanation    The remote switch is now online. The virtual switch will now look for line cards on the remote switch and try to bring them online.

Recommended Action    This is an informational message. No action is required.

SATVS_UL_MGMT-6

Error Message    %SATVS_UL_MGMT-6-RS_RSL_MEMBER_BOUNCE: RSL member [chars] bounced due 
to unbundle action 

Explanation    The RSL member was bounced after it became unbundled.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-6-RS_VS_RSL_BOUNCE: RSL members to the active Virtual 
Switch bounced as RSL went down 

Explanation    Because the remote switch link (RSL) is down, all members to the same virtual switch are bounced to allow the virtual switch to recognize the RSL down condition.

Recommended Action    This is an informational message. No action is required.

Error Message    %SATVS_UL_MGMT-6-VS_RS_INVALID_RP_SP_SYNC_TYPE: RP-SP sync: Received 
invalid sync type [hex] 

Explanation    An internal RP-SP synchronization error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_UL_MGMT-6-VS_RSL_MEMBER_BOUNCE: RSL member [chars] bounced due 
to unbundle action 

Explanation    The remote switch link (RSL) member was bounced after it became unbundled.

Recommended Action    This is an informational message. No action is required.

SATVS_WARM_UPGRADE Messages

This section contains satellite switch virtual switch (VS) warm upgrade messages.

SATVS_WARM_UPGRADE-3

Error Message    %SATVS_WARM_UPGRADE-3-VS_RS_BAD_SUB_OPCODE: (WUG)Dropping bad sub 
opcode ([hex]) from [chars] [dec] 

Explanation    Received an invalid message from the remote switch. The message could be corrupted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_WARM_UPGRADE-3-VS_RS_INVALID_EVENT: Invalid [chars] event 
[dec]:[dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_WARM_UPGRADE-3-VS_RS_INVALID_QUEUE_EVENT: Event on invalid 
[chars] queue [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_WARM_UPGRADE-3-VS_RS_WUG_RESP_FAIL: Failed sending 
WARM_UPGRADE response [chars]to [chars] [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_WARM_UPGRADE-3-VS_RS_WUG_RESP_MEM_FAIL: Alloc failure for 
WARM_UPGRADE_RESP to switch-id(Internal) [dec] 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_WARM_UPGRADE-3-VS_RS_WUG_SEND_FAIL: WUG start:scp send failed 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SATVS_WARM_UPGRADE-3-VS_RS_WUG_TEST: Test msg_satvs_warm_upgrade 

Explanation    An internal error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SBFIFO Messages

This section contains packet first-in, first-out (FIFO) MAC controller messages.

SBFIFO-1

Error Message    %SBFIFO-1-BAD_IDB: Invalid Interface Descriptor Block 

Explanation    The driver failed to get the interface descriptor block (IDB).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %%SBFIFO-1-BAD_PARTICLE: Problem getting particle size 

Explanation    The driver was unable to obtain the particle size for this interface.

Recommended Action    This is a software bug. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-BAD_POOL: Could not init buffer pools 

Explanation    The driver failed to obtain a pool of buffers from the Cisco IOS software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-BAD_SB_NOMEM: [chars] - Cannot create IDB subblock due to 
insufficient memory 

Explanation    There was insufficient system memory to create the subblock.

Recommended Action    The router requires more main memory. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-BAD_STRUCT: Could not initialize structure 

Explanation    The driver failed to initialize a structure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-BAD_SUBBLOCK: [chars] - Could not install or use IDB subblock 

Explanation    An internal Cisco IOS error prevented the IDB subblock from being installed or used.

Recommended Action    This is a software bug. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-IDBTYPE_UNK: Unknown IDBTYPE while starting driver 

Explanation    The IDBTYPE in the interface's instance structure is undefined for this driver.

Recommended Action    This is a software bug. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-INITFAIL_NOMEM: [chars], initialization failed, no buffer 
memory 

Explanation    The Ethernet port initialization failed due to insufficient memory. The router requires more packet memory.

Recommended Action    Consider a system upgrade. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-MODE_INVALID: Unknown or invalid chip mode (MII/TBI) 

Explanation    The driver subblock contains an invalid or undefined chip operating mode (MII or TBI mode).

Recommended Action    This is a software bug. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-1-RESET: MAC-FIFO Still in Reset 

Explanation    An attempt was made to access the MAC-FIFO while it was in reset.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SBFIFO-3

Error Message    %SBFIFO-3-ERRINT: [chars], error interrupt, mac_status = [hex] 

Explanation    The MAC-FIFO controller signalled an error condition.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SBFIFO-3-TOOBIG: [chars], packet too big ([dec]), from [enet] 

Explanation    The interface detects a packet larger than the value that is defined by MTU.

Recommended Action    Determine the MTU setting of the other station. No action is required.

SCHED Messages

This section contains scheduler messages.

Error Message    %SCHED-3-SEMLOCKED: [chars] attempted to lock a semaphore, already 
locked by itself 

Explanation    Some sections of code use semaphores to protect critical sections of software. An attempt was made to lock a semaphore that was already locked.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SCP Messages

This section contains Switch Module Configuration Protocol (SCP) messages.

SCP-1

Error Message    %SCP-1-TASK_CREATE_FAIL: Failed to create SCP Generic Unsolicited 
message handler task 

Explanation    The system could not spawn a process that handles certain types of incoming SCP packets. This could be due to low memory on the switch, in which case other related errors may appear.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SCP-3

Error Message    %SCP-3-ETHERTYPE_FAIL: Ethertype configuration on module [dec], port 
[dec], failed with return code [hex] 

Explanation    The EtherType configuration failed on the specified port. This usually means that the module hardware does not support the EtherType configuration. The return error code provides more information.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SCP-3-SCP_HA_FAIL: SCP HA Seq Set - Module: [dec] failed [dec] times 

Explanation    The system did not receive the SCP HA sequence set acknowledgment.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SCP-4

Error Message    %SCP-4-UNK_OPCODE: Received unknown unsolicited message from src_addr 
[hex], dest_addr [hex], length [dec], dsap [dec], ssap [dec], opcode [hex] 

Explanation    An unsupported SCP message was sent to this processor.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SCP-5

Error Message    %SCP-5-ASYNC_WATERMARK: [dec] messages pending in [chars] 

Explanation    The specified number of SCP messages are waiting in the specified local queue. This condition might indicate that the SP is generating many messages, that the SP is too busy to send them, or that the module cannot process them at a faster pace. In most cases, this condition occurs when there is heavy control plane activity, such as the formation of Layer 2 trunks, the addition of new VLANs, or the toggling of links.

Recommended Action    Determine if the SP is busy or if there is interface link toggling. If this condition persists for more than five minutes, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SCP-5-ENABLE: Module enabled [chars] 

Explanation    The supervisor engine sent a message to the router to indicate that a module has been enabled.

Recommended Action    No action is required.

SDLC Messages

This section contains Synchronous Data Link Control (SDLC) protocol messages.

Error Message    %SDLC-4-NOUA: [chars], addr [hex] received command [hex] in response 
to SNRM, expected UA 

Explanation    The router received a frame other than a UA in response to a SNRM.

Recommended Action    Check the end station to see if the SNA stack is up and running.

SDM Messages

This section contains Security Device Manager (SDM) template messages.

SDM-6

Error Message    %SDM-6-MISMATCH_ADVISE: [chars] 

Explanation    This message provides information regarding an SDM mismatch.

Recommended Action    No action is required.

SEC_LOGIN Messages

This section contains Secure Login messages.

SEC_LOGIN-1

Error Message    %SEC_LOGIN-1-QUIET_MODE_ON: Still timeleft for watching failures is 
[int] secs, [user: [chars]] [Source: [IP_address]] [localport: [int]] [Reason: 
[chars]] [ACL: [chars]] at [chars] 

Explanation    Quiet mode is now on. No request for connections are now accepted other than those allowed by the ACL, if the ACL is configured for the blocking period. An implicit deny all of any logins will be in effect.

Recommended Action    Because all requests from other sources are blocked, check the ACL and add any source addresses as necessary.

SEC_LOGIN-3

Error Message    %SEC_LOGIN-3-INIT_FAILED: Secure Login Initialization failed. [chars] 

Explanation    Initialization of the secure login subsystem has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SEC_LOGIN-4

Error Message    %SEC_LOGIN-4-25: Login failed [user: [chars]] [Source: [IP_address]] 
[localport: [int]] [Reason: [chars]] at [chars] 

Explanation    A user name or password is invalid.

Recommended Action    Specify a vaild user name or password.

SEC_LOGIN-5

Error Message    %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: [chars]] [Source: 
[IP_address]] [localport: [int]] at [chars] 

Explanation    Login has succeeded.

Recommended Action    No action is required.

Error Message    %SEC_LOGIN-5-QUIET_MODE_OFF: Quiet Mode is OFF, because [chars] at 
[chars] 

Explanation    Quiet mode is now off. The router is now operating in normal connection processing mode. The reason for the change is specified in the message text.

Recommended Action    No action is required.

SFF8472 Messages

This section contains floating-point subsystem (SFF8472) messages.

SFF8472-2

Error Message    %SFF8472-2-NOMEM: Not enough memory available for [chars]

Explanation    The SFF8472 subsystem could not obtain the memory it needed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SFF8472-3

Error Message    %SFF8472-3-INTERNAL_ERROR: [chars]

Explanation    The SFF8472 subsystem encountered an internal software error. The error message contains text that can be used to help identify the nature of the problem.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %%SFF8472-3-READ_ERROR: [chars] 

Explanation    There was an error reading digital optical monitoring information from the transceiver at the specified interface.

Recommended Action    Try removing and reinserting the transceiver. If the error remains, replace the transceiver.

Error Message    %SFF8472-3-THRESHOLD_VIOLATION: [chars]: [chars]; Operating value: 
[chars], Threshold value: [chars]. 

Explanation    There has been a threshold violation as specified in the message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SFF8472-3-UNEXPECTEDEVENT: Process received unknown event (maj [hex], 
min [hex]). 

Explanation    A process can register to be notified when various events occur in the router. This message indicates that a process received an event it did not know how to handle.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SFP Messages

This section contains Small Form-Factor Pluggable (SFP) module messages.

SFP-3

Error Message    %SFP-3-EEPROM_DUP_ERR: SFP on ports [chars] and [chars] have duplicate 
serial numbers 

Explanation    The GBIC or SFP was identified as a Cisco GBIC, but its vendor ID and serial number match those of another GBIC on the system.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SFP-4

Error Message    %SFP-4-EEPROM_CRC_ERR: EEPROM checksum error for SFP in [chars] 

Explanation    The SFP in the port specified in the message text contains invalid EEPROM data.

Recommended Action    Remove the SFP from the specified port.

Error Message    %SFP-4-EEPROM_READ_ERR: Error in reading SFP serial ID in [chars] 

Explanation    An error occurred while the SFP type was being read from the EEPROM.

Recommended Action    Remove the SFP from the port that reported the error.

Error Message    %SFP-4-EEPROM_SECURITY_ERR: SFP in [chars] failed security check 

Explanation    The SFP in the port specified in the message text contains invalid EEPROM data.

Recommended Action    Remove the SFP from the port that reported the error.

SFP_SECURITY Messages

This section contains Small Form-Factor Pluggable (SFP) module security check messages.

SFP_SECURITY-4

Error Message    %SFP_SECURITY-4-DUPLICATE_SN: SFP interface [chars] has the same 
serial number as another SFP interface 

Explanation    The SFP was identified as a Cisco SFP, but its serial number matches that of another interface on the system. Cisco SFPs are assigned unique serial numbers.

Recommended Action    Verify that the SFP was obtained from Cisco or from a supported vendor.

Error Message    %SFP_SECURITY-4-ID_MISMATCH: Identification check failed for SFP 
interface [chars] 

Explanation    The SFP was identified as a Cisco SFP, but the system was unable to verify its identity.

Recommended Action    Check the list of supported SFPs for this version of the system software. An upgrade may be required for newer SFPs. If this does not fix the problem, verify that the SFP was obtained from Cisco or from a supported vendor.

Error Message    %SFP_SECURITY-4-SFP_INTERR: Internal error occurred in setup for SFP 
interface [chars] 

Explanation    The system was unable to allocate resources or encountered some other problem while attempting to set up the specified SFP interface.

Recommended Action    Reload the system. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SFP_SECURITY-4-UNRECOGNIZED_VENDOR: SFP interface [chars] 
manufactured by an unrecognized vendor 

Explanation    The SFP was identified as a Cisco SFP, but the system was unable to match its manufacturer with one on the known list of Cisco SFP vendors.

Recommended Action    Check the list of supported SFPs for this version of the system software. A software upgrade may be required for newer SFPs.

Error Message    %SFP_SECURITY-4-VN_DATA_CRC_ERROR: SFP interface [chars] has bad crc 

Explanation    The SFP was identified as a Cisco SFP, but it does not have a valid CRC in the EEPROM data.

Recommended Action    Check the list of supported SFPs for this version of the system software. A software upgrade may be required for newer SFPs. Even if the system could not recognize the SFP, it may still operate properly, but might perform with limited functionality.

SGBP Messages

This section contains Stack Group Bidding Protocol (SGBP) messages.

SGBP-1

Error Message    %SGBP-1-AUTHFAILED: Member [chars] failed authentication 

Explanation    This message is generated only when SGBP hellos or errors debugging is enabled. This indicates that an attempted peer connection ended in authentication failure. A peer may be misconfigured, or this could indicate an attempted security breach.

Recommended Action    Check if the peer is correctly configured. If there is a chance your network is under attack, obtain knowledgeable assistance. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %SGBP-1-DIFFERENT: Rcv [chars]'s addr [IP_address] is different from 
the hello's addr [IP_address] 

Explanation    The internally-configured address for an SGBP member does not match the address of the host that tried to authenticate as that member. The configuration is incorrect on either this system or the other member - they must agree.

Recommended Action    Determine which configuration is in error and fix it.

Error Message    %SGBP-1-DUPLICATE: Rcv Duplicate bundle [chars] is found on member 
[chars] 

Explanation    This message is generated only when SGBP hellos or errors debugging is enabled. This indicates that a duplicate bundle was received from the same peer more than once. The duplicate was discarded.

Recommended Action    If this message recurs, copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support

Error Message    %SGBP-1-MISSCONF: Possible misconfigured member [chars] using 
[IP_address] 

Explanation    This message is generated only when SGBP hellos or error debugging is enabled. This indicates a configuration error. Either this router has an incorrect IP address listed for the peer or the peer is using an incorrect IP address.

Recommended Action    Find and correct the configuraton error.

Error Message    %SGBP-1-UNKNOWNHELLO: Rcv Hello message from non-group member using 
[IP_address] 

Explanation    This message is generated only when SGBP hellos or error debugging is enabled. An SGBP Hello message was received from a host that is not a member of the SGBP group, and discarded.

Recommended Action    This is a configuration error. Either that host should be listed in this router's configuration as a member (if that is actually true) or the other host is misconfigured to attempt to join this group.

SGBP-3

Error Message    %SGBP-3-INVALID: MQ message with [chars] 

Explanation    This message is generated only when SGBP error debugging is enabled. An invalid message was received and discarded.

Recommended Action    This probably indicates an error in network media or a peer which is generating erroneous packets.

Error Message    %SGBP-3-INVALIDADDR: Stack group [chars] IP address [IP_address] 

Explanation    The current configuration does not allow a local IP address to be configured using sgbp member . Any local address is automatically removed fro the SGBP group.

Recommended Action    Do not configure sgbp member using a local IP address.

Error Message    %SGBP-3-INVALIDB: [chars] for bundle '[chars]' -- [chars] 

Explanation    An internal software error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SGBP-3-INVFIELD: [chars] field type [hex] has [chars] [dec] (expected 
[dec]) 

Explanation    This message indicates that an SGBP request from a peer contained invalid or corrupt data.

Recommended Action    Check the peer equipment or network media for any problems.

Error Message    %SGBP-3-PEERERROR: Peer [IP_address] [chars] during 'PB [chars]' state 
for bundle [chars] 

Explanation    An internal software error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SGBP-3-TIMEOUT: Peer [IP_address] bidding; state 'PB [chars]' deleted 

Explanation    This message is generated only when SGBP event debugging is enabled. It indicates that a peer timed out while closing a query. The connection has been dropped.

Recommended Action    Check the peer equipment and network media for problems.

Error Message    %SGBP-3-UNEXP: MQ [chars] from [IP_address] for query [dec]:[dec], 
bundle [chars], bid [dec], state [chars] 

Explanation    This message is generated only when SGBP error debugging is enabled. The SGBP connection has entered an unexpected state, possibly due to a software error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %SGBP-3-UNKNOWN: [IP_address] not known 

Explanation    This message is generated only when SGBP error debugging is enabled. An SGBP connection was attempted by a host which was not recognized as a peer. The connection was not accepted.

Recommended Action    Depending on the network topology and firewalling, SGBP connection attempts from a non-peer host could indicate probing and attempts to breach security. If there is a chance your network is under attack, obtain knowledgeable assistance. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %SGBP-3-UNKNOWNEVENT: Event [hex] from peer at [IP_address] 

Explanation    This message is generated only when SGBP error debugging is enabled. An invalid event occurred, which probably indicates an internal software error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SGBP-3-UNKNOWNPEER: Event [hex] from peer at [IP_address] 

Explanation    This message is generated only when SGBP error debugging is enabled. An SGBP event came from a network host which was not recognizable as an SGBP peer. The event was discarded.

Recommended Action    Check if a network media error could have corrupted the address, or if peer equipment is malfunctioning to generate corrupted packets. Depending on the network topology and firewalling, SGBP packets from a non-peer host could indicate probing and attempts to breach security. If there is a chance your network is under attack, obtain knowledgeable assistance. Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

SGBP-5

Error Message    %SGBP-5-ARRIVING: New peer event for member [chars] 

Explanation    This message is generated only when SGBP event debugging is enabled. An SGBP peer joined the group.

Recommended Action    No action is required.

Error Message    %SGBP-5-LEAVING: Member [chars] leaving group [chars] 

Explanation    This message is generated only when SGBP event debugging is enabled. An SGBP peer has left the group.

Recommended Action    No action is required.

Error Message    %SGBP-5-SHUTDOWN: [chars] 

Explanation    This message is generated only when SGBP event debugging is enabled. A process involved in SGBP was terminated upon completion of its work.

Recommended Action    No action is required.

Error Message    %SGBP-5-STARTUP: [chars] 

Explanation    This message is generated only when SGBP event debugging is enabled. An process involved in SGBP was started.

Recommended Action    No action is required.

SGBP-6

SGBP-7

Error Message    %SGBP-7-ACTIVE: Member [chars] State - Active 

Explanation    This message is generated only when SGBP errors or events debugging is enabled. This indicates that a link to another SGBP member has completed the interactions to set it up and is now entering the active state.

Recommended Action    No action is required.

Error Message    %SGBP-7-AUTHOK: Member [chars] State - AuthOK 

Explanation    This message is generated only when SGBP errors or events debugging is enabled. A message was received from another SGBP member indicating that an authentication attempt to that member succeeded.

Recommended Action    No action is required.

Error Message    %SGBP-7-CANCEL: Local query #[dec]:[dec] for bundle [chars] 

Explanation    This message is generated only when SGBP query debugging is enabled. It provides information about queries in progress.

Recommended Action    No action is required.

Error Message    %SGBP-7-CHALLENGE: Send Hello Challenge to [chars] group [chars] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. This indicates that an authentication challenge was sent to a peer.

Recommended Action    No action is required.

Error Message    %SGBP-7-CHALLENGED: Rcv Hello Challenge message from member [chars] 
using [IP_address] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. This indicates that an authentication challenge was received from a peer.

Recommended Action    No action is required.

Error Message    %SGBP-7-CLOSE: Closing pipe for member [chars] 

Explanation    This message is generated only when SGBP event debugging is enabled. An interprocess communication link was closed.

Recommended Action    No action is required.

Error Message    %SGBP-7-DONE: Query #[dec] for bundle [chars], count [dec], master is 
[chars] 

Explanation    This message is generated only when SGBP query debugging is enabled. It provides information about queries in progress.

Recommended Action    No action is required.

Error Message    %SGBP-7-DUPL: Duplicate local query #[dec] for [chars], count [dec], 
ourbid [dec] 

Explanation    This message is generated only when SGBP query debugging is enabled. It provides information about queries in progress.

Recommended Action    No action is required.

Error Message    %SGBP-7-EQUAL: [dec] equal highest bids, randomly select bid# [dec] 

Explanation    This message is generated only when SGBP query debugging is enabled. It provides information about queries in progress.

Recommended Action    No action is required.

Error Message    %SGBP-7-HANGUP: I am a forward-only member, can't forward bundle 
[chars], hangup 

Explanation    This message is generated only when SGBP query, event and/or error debugging is enabled. This indicates a routine change of role for the router in its SGBP interactions with its peers.

Recommended Action    No action is required.

Error Message    %SGBP-7-KEEPALIVE: Sending Keepalive to [chars], retry=[dec] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. It indicates that a keepalive message was send to an SGBP member.

Recommended Action    No action is required.

Error Message    %SGBP-7-KEEPALIVE_TIMEOUT: Keepalive timeout on [chars] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. It indicates that keepalive messages were not answered so the pipe to an SGBP member has been closed.

Recommended Action    No action is required.

Error Message    %SGBP-7-MQ: [chars] ([hex]) for query [dec]:[dec], bundle [chars], bid 
[dec], len [dec] 

Explanation    This message is generated only when SGBP error debugging is enabled. This message indicates that an SGBP query has been received.

Recommended Action    No action is required.

Error Message    %SGBP-7-MQB: Bundle: [chars]State: [chars]OurBid: [dec] 

Explanation    This message is part of a list of debug states displayed at the request of the operator.

Recommended Action    No action is required.

Error Message    %SGBP-7-NEWL: Local query #[dec] for [chars], count [dec], ourbid [dec] 

Explanation    This message is generated only when SGBP query debugging is
enabled. It provides information about queries in progress.

Recommended Action    No action is required.

Error Message    %SGBP-7-NEWP: Peer query #[dec] for [chars], count [dec], peerbid 
[dec], ourbid [dec] 

Explanation    This message is generated only when SGBP query debugging is enabled. It provides information about queries in progress.

Recommended Action    No action is required.

Error Message    %SGBP-7-NORESP: Failed to respond to [chars] group [chars], may not 
have password 

Explanation    An authentication challenge was received but there was no information available to respond to it. This probably indicates a configuration error, a missing password.

Recommended Action    Refer to the documentation to configure a username with the same name as the SGBP group.

Error Message    %SGBP-7-PB: [IP_address]	State: [chars]Bid: [dec] Retry: [dec] 

Explanation    This message is part of a list of debug states displayed at the request of the operator.

Recommended Action    No action is required.

Error Message    %SGBP-7-RCVD: MQ [chars] from [IP_address] for query [dec]:[dec], 
bundle [chars], bid [dec], prot[chars] 

Explanation    This message is generated only when SGBP message debugging is enabled. It indicates that an SGBP packet was received.

Recommended Action    No action is required.

Error Message    %SGBP-7-RCVINFO: Received Info Addr = [IP_address] Reference = [hex] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. It indicates that data was received by a listener process.

Recommended Action    No action is required.

Error Message    %SGBP-7-RESPONSE: Send Hello Response to [chars] group [chars] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. This indicates that a response to an authentication challenge was sent to a peer.

Recommended Action    No action is required.

Error Message    %SGBP-7-RESPONSED: Rcv Hello Response message from member [chars] 
using [IP_address] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. This indicates that a response to an authentication challenge was received from a peer.

Recommended Action    No action is required.

Error Message    %SGBP-7-SENDAUTHOK: Send Hello Authentication OK to member [chars] 
using [IP_address] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. A message was send or re-sent to another SGBP member indicating that an authentication attempt from that member succeeded.

Recommended Action    No action is required.

Error Message    %SGBP-7-SENDINFO: Send Info Addr to [chars] 

Explanation    This message is generated only when SGBP hellos debugging is enabled. It indicates that data was sent by the listener process in response to received data.

Recommended Action    No action is required.

Error Message    %SGBP-7-SENT: MQ [chars] to [IP_address] for query [dec]:[dec], bundle 
[chars], bid [dec], prot[chars], len [dec] 

Explanation    This message is generated only when SGBP message debugging is enabled. It indicates that an SGBP packet was sent.

Recommended Action    No action is required.

SGPM Messages

This section contains SG Policy Manager messages.

SGPM-3

Error Message    %SGPM-3-POLICY_CTX_POISONED: Policy context %X has bad magic, %X. 

Explanation    The magic number in the policy context is wrong.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SGPM-3-POLICY_INCOMPLETE_RULE: Subscriber policy rule (%s), event 
(%s) is missing a mandatory action for service (%s); automatically adding. 

Explanation    The subscriber policy rule was missing a mandatory action. The missing action will be automatically added.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SHMWIN Messages

This section contains shared memory messages.

SHMWIN-6

Error Message    %SHMWIN-6-ALLOC_FAILURE: Insufficient memory 

Explanation    There was a failure while returning physical memory to the system.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-CORE_NOT_ENABLED: In function [chars] The core has not been 
enabled to get more physical memory 

Explanation    The core has not been enabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-EXCEEDED_MAX_SIZE: In function [chars] The requested memory 
size exceeded the window size 

Explanation    The memory requested in this window exceeded the window size.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-EXCEEDED_MAX_USERS: In function [chars] The maximum number 
of users for a shared window has been exceeded 

Explanation    The maximum number of users for a shared window has been exceeded.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-3-FREE_FAILURE: Failure while freeing memory in function 
[chars] 

Explanation    An attempt was made to free memory that has already been freed or is not within the address space of the current process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-INCONSISTENCY: Inconsistent state in window 

Explanation    Inconsistent state in window.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-INVALID_ARGS: One or more invalid arguments have been passed 
to the function [chars] 

Explanation    One or more invalid arguments have been passed to the shared memory APIs.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-INVALID_PARAM: An invalid parameter has been passed to the 
function [chars] 

Explanation    One or more invalid parameters have been passed to the shared memory APIs.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-MAX_WINDOWS_EXCEEDED: In function [chars] process has 
exceeded the maximum number of windows that can be opened by it 

Explanation    The process has exceeded the maximum number of windows that can be opened by a process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-MEM_COLLISION: In function [chars] the requested memory 
space collides with the memory space of other windows 

Explanation    There is a memory space collision.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-MUTEX_ERROR: An internal mutex error has occured in the 
function [chars] 

Explanation    An error has been encountered in the locking or unlocking of the shared memory mutual exclusivity lock (mutex).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-MUTEX_MONITOR_FAILURE: Registration failed with mutex 
monitor in [chars] 

Explanation    An error occurred while trying to monitor a shared memory mutual exclusivity lock (mutex).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-NOT_SUPPORTED: The option passed to function [chars] is not 
supported 

Explanation    This option is not supported.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-7-PHYS_MAP_FAILURE: In function [chars] Failed to map physical 
memory 

Explanation    Failed to map physical memory in the specified function.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-PTHREAD_MUTEX_LOCK_FAILED: An internal mutex error has been 
encountered in function [chars] 

Explanation    A process that has obtained the access mutex has not released it.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-PTHREAD_MUTEX_UNLOCK_FAILED: An internal mutex error has 
been encountered in function [chars] 

Explanation    An internal mutex error has been encountered.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-SHMEM_FAILURE: The function [chars] Could not access shared 
memory 

Explanation    Could not access shared memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-SYS_LOCK_CREATE_FAILED: The lock creation for the shared 
memory failed in function [chars] 

Explanation    Lock creation for the shared memory has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    SHMWIN-6-SYS_LOCK_CREATE_SUCCEEDED: The lock creation for the shared 
memory succeeded in function [chars] 

Explanation    Lock creation for the shared memory succeeded.

Recommended Action    No action is required.

Error Message    %SHMWIN-6-SYS_LOCK_FAILED: In function [chars] The process was unable 
to lock the shared memory against other processes 

Explanation    The process was unable to lock the shared memory against other users.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-SYS_LOCK_MMAP_FAILED: The mmap for the shared memory lock 
creation failed in function [chars] 

Explanation    Lock creation for the shared memory has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-SYS_UNLOCK_FAILED: In function [chars] The process was 
unable to unlock the shared memory 

Explanation    The shared memory could not be unlocked due to an internal error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-7-UNLINK_ERROR: An internal error occurred while unlinking in 
function [chars] 

Explanation    An internal error occurred while unlinking.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-VIRT_MAP_FAILURE: In function [chars] Could not reserve 
virtual memory 

Explanation    Could not reserve virtual memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SHMWIN-6-WINDOW_EXCEEDED_MAX_POOLS: The maximum number of pools has 
been exceeded in function [chars] 

Explanation    The maximum number of pools has been exceeded.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIBYTE Messages

This section contains SiByte processor complex messages.

SIBYTE-0

Error Message    %SIBYTE-0-ADDRESS_TRAP: Address trap: [dec] occurred on physical 
address: [hex] at EPC: [hex], ERR_EPC: [hex] 

Explanation    A previously defined address trap has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIBYTE-0-MISDIRECTED_INTERRUPT: A misdirected interrupt occurred with 
int_mask: [hex] 

Explanation    A misdirected interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIBYTE-0-UNCORRECTABLE_ECC_ERR: An uncorrectable ECC error has 
occurred, A_BUS_L2_ERRORS: [hex], A_BUS_MEMIO_ERRORS: [hex], 
A_SCD_BUS_ERR_STATUS: [hex] 

Explanation    An uncorrectable ECC error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIBYTE-3

Error Message    %SIBYTE-3-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred, 
A_BUS_L2_ERRORS: [hex], A_BUS_MEMIO_ERRORS: [hex], A_SCD_BUS_ERR_STATUS: [hex] 

Explanation    The card detected and corrected a single-bit parity error using the error correction code (ECC) functionality. There was no interruption of service. Transient parity errors are typically caused by RF radiation.

Recommended Action    No action is necessary if the message occurs infrequently. If errors become frequent, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIBYTE-6

Error Message    %SIBYTE-6-SB_RMON_OVRFL: RMON register [dec] overflow on mac [dec]

Explanation    The indicated RMON register has overflowed (wrapped around), meaning that the counter reached its maximum value and restarted from zero. The affected register is in the RMON statistical information associated with the specified MAC interface of the Sibyte ethernet controller located on the linecard.

Recommended Action    This message is informational, and is normal when the service internal command is enabled. The service internal command should be enabled only for troubleshooting. To disable service internal messages, enter the global configuration command no service internal.

SIBYTE_ION

This section contains Sibyte Ion messages.

SIBYTE_ION-3

Error Message    %SIBYTE_ION-3-SB_THREAD_CTL_ERR: Call to ThreadCTL() failed: function 
= [chars], line number = [dec], return_code = [dec], errno = [dec]  

Explanation    A QNX call to ThreadCTL() failed. [chars] is the function, the first [dec] is the line number, the second [dec] is the return code, and the third [dec] is the error number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP10G_QM Messages

This section contains 10Gigabit Ethernet SPA Interface Processor (SIP10G) QoS manager (QM) messages.

SIP10G_QM-2

Error Message    %SIP10G_QM-2-ACL_MERGE_NO_MEM: Memory low: ACL merge failed for 
interface %s in %s direction 

Explanation    An ACL merge failed due to insufficient system memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP10G_QM-2-BAD_TLV: Error in internal messaging - bad tlv %d 

Explanation    A software error occurred during the programming of ACLs into the TCAM.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP10G_QM-2-CONFORM_ACTION_NE: Different aggregate and microflow 
conform-action in class %s[policy %s] 

Explanation    The conform actions must be identical in both the police and police flow commands for the same class in a service policy applied to MLS interfaces.

Recommended Action    Change the conform action in the police or the police flow command to make both actions the same, or remove one of two commands.

Error Message    %SIP10G_QM-2-DSCP_NE: Different aggregate and microflow DSCP in class 
%s[policy %s] 

Explanation    The conform actions must be identical in both the police and police flow commands for the same class in a service policy applied to MLS interfaces.

Recommended Action    Change the conform action in the police or the police flow command to make both actions the same, or remove one of two commands.

Error Message    %SIP10G_QM-2-MERGE_ERROR: ACL merge error for Interface %s in %s 
direction status %d 

Explanation    An ACL merge failed before programming the ACLs into the TCAM.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP10G_QM-2-NO_AGGREG_PLC: Hardware aggregate policer resources 
exceeded 

Explanation    The hardware cannot support the number of aggregate policers required by configuration.

Recommended Action    Reduce the total number of aggregate policers required by all service policies installed in the device. For example, use shared aggregate policers, as defined by the mls qos aggregate-policer command, instead of default per-interface policers.

Error Message    %SIP10G_QM-2-NO_FLOW_PLC: Hardware microflow policer resources 
exceeded 

Explanation    The hardware cannot support the microflow policers required by the policy map.

Recommended Action    Adjust the microflow policing rate and burst parameters to reduce the total number of different rate and burst combinations in the device.

Error Message    %SIP10G_QM-2-P10G_PLC_ATTACH_REJECT_ARP_UFLOW: Command rejected: 
(policy-map %s class %s interface %s dir %s) flow policer is not supported for 
traffic classes matching ARP ACL. 

Explanation    In a policy map, a flow policer is not supported if the traffic class matches an ARP ACL.

Recommended Action    Remove the flow policer from the traffic class matching the ARP ACL and reattach the policy, or change the traffic class to match a non-ARP ACL and configure the flow policer.

Error Message    %SIP10G_QM-2-TCAM_BAD_LOU: Bad TCAM LOU operation in ACL 

Explanation    A software error caused a failure in programming ACLs into the TCAM.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP10G_QM-2-TCAM_ENTRIES_EXCEEDED: ACL merge failed, ACEs exceed TCAM 
capacity or 0 ACES, %d ACEs for interface %s in %s direction 

Explanation    An ACL merge was aborted because the number of ACES exceeded the TCAM capacity or because the number of ACES was zero.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP10G_QM-2-TCAM_ERROR: TCAM programming error %d 

Explanation    A software error caused a failure in programming ACLs into the TCAM.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP10G_QM-2-TCAM_MEMORY: NMP processor memory low 

Explanation    The programming of ACLs into the TCAM failed due to insufficient memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP10G_QM-4

Error Message    %SIP10G_QM-4-TCAM_CAPMAP: Interface %s hardware TCAM LOU usage 
capability exceeded 

Explanation    The hardware TCAM cannot support the number of logical operations used with the configured ACLs on this specific interface. The hardware TCAM can support a maximum of 9 logical operations per interface and a maximum total of 64 logical operations.

Recommended Action    Reduce the use of logical operations in the ACLs.

Error Message    %SIP10G_QM-4-TCAM_ENTRY: Hardware TCAM entry capacity exceeded 

Explanation    The configured ACLs exceed the capacity of the hardware TCAM.

Recommended Action    To reduce TCAM resource contention, try to share the same ACLs across multiple interfaces.

Error Message    %SIP10G_QM-4-TCAM_LABEL: Hardware TCAM label capacity exceeded 

Explanation    The hardware TCAM cannot support the number of interfaces configured with ACLs. The hardware TCAM supports 500 interfaces configured with ACLs.

Recommended Action    Unconfigure ACLs from some of the interfaces.

Error Message    %SIP10G_QM-4-TCAM_LOU: Hardware TCAM LOU capacity exceeded 

Explanation    The hardware TCAM cannot support the number of logical operations used with the configured ACLs. The hardware TCAM can support a maximum of 9 logical operations per interface and a maximum total of 64 logical operations.

Recommended Action    Reduce the use of logical operations in the ACLs.

Error Message    %SIP10G_QM-4-TCAM_MASK: Hardware TCAM mask entry capacity exceeded 

Explanation    The hardware TCAM does not have the mask capacity to handle the number of configured ACLs.

Recommended Action    To reduce TCAM resource contention, try to share the same ACLs across multiple interfaces.

SIP10G_QM-6

Error Message    %SIP10G_QM-6-IOS_AND_PS_FEATURE: %s action cannot be present in 
classmap %s of policymap %s because this service-policy cannot be executed in Cat6K 
HW due to the presence of filters which require packets to be processed in IOS SW 

Explanation    Network-Based Application Recognition (NBAR) is required for the match protocol commands used. Because NBAR exists only in software, hardware-specific actions are not supported.

Recommended Action    Remove the hardware-specific commands or remove the match protocol criteria in the class map.

Error Message    %SIP10G_QM-6-SET_AND_POLICE: 'set' and 'police' commands cannot 
co-exist in classmap %s of policymap %s 

Explanation    The set and police commands cannot coexist in a class map for a QoS manager (QM) supported interface.

Recommended Action    Remove one of the commands or use the set-dscp-transmit | set-precedence-transmit | set-exp option for the conform action of the police command.

Error Message    %SIP10G_QM-6-SET_AND_TRUST: 'set' and 'trust' commands cannot co-exist 
in classmap %s of policymap %s 

Explanation    The set and trust commands cannot coexist in a class map for a QM supported interface.

Recommended Action    Remove one of the commands.

Error Message    %SIP10G_QM-6-SHAREDAG_AND_POLICE: 'police aggregate' and regular 
'police' commands cannot co-exist in classmap %s of policymap %s 

Explanation    The police aggregate and police commands cannot coexist in a class map for a QM supported interface.

Recommended Action    Remove one of the commands or use the set-dscp-transmit | set-precedence-transmit | set-exp option for the conform action of the police command.

SIP200 Messages

This section contains SPA Interface Processor 200 (SIP200) messages.

SIP200-3

Error Message    %SIP200-3-BADIFCTRL: Corrupted sip-200 information for interface 
[chars] [[hex]] 

Explanation    The interface SIP-200 information is not valid. This is an internal software error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Collect the output of the show memory command on the line card. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP200-4

Error Message    %SIP200-4-MEM_MODULE_MISMATCH: Memory modules are not identical 

Explanation    The memory modules do not have identical parameters. This may impact the performance.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Collect the output of the show memory command on the line card. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP200_MP Messages

This section contains SPA Interface Processor 200 (SIP200) multiprocessing messages.

SIP200_MP-1

Error Message    %SIP200_MP-1-UNSAFE: Multiprocessor error on [chars] 

Explanation    The line card CPU contains two CPU cores, one of which is the master CPU. The CPU specified in the error message attempted to perform an operation that is illegal for multiprocessor operation between the two CPU cores.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP200_MP-3

Error Message    %SIP200_MP-3-INIT_FAILURE: Second CPU initialization failed 

Explanation    The line card CPU unit contains two CPU cores. The second CPU core has not initialized successfully. The line card is operating with one CPU core only. You may also see a SYS-2-MALLOCFAIL warning message.

Recommended Action    If this message appears when a line card boots up, reload the line card by entering the hw-module module slot reset command. Also, check how much memory the line card has by entering the show controller cwan command.

SIP200_MP-4

Error Message    %SIP200_MP-4-PAUSE: Non-master CPU is suspended for too long, from 
[hex]([int]) to [hex] for [int] CPU cycles. [chars] 

Explanation    The line card CPU contains two CPU cores, one of which is the master CPU. The master CPU caused the second, nonmaster CPU to be suspended for too long a time. This condition could cause packet drops on the nonmaster CPU. This warning indicates a transient software problem. The line card should continue to operate normally.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP200_MP-4-TIMEOUT: Master CPU request timed out [chars] 

Explanation    The line card CPU contains two CPU cores, one of which is the master CPU. The nonmaster CPU is not responding in time to a request from the master CPU. This warning indicates a transient software problem. The line card should continue to operate normally.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP200_SPIRX Messages

This section contains SPA Interface Processor 200 (SIP200) SPI4.2 bus ingress interface messages.

SIP200_SPIRX-3

Error Message    %SIP200_SPIRX-3-INITFAIL: Failed to configure the ingress SPI4.2 
device. Error = [hex] 

Explanation    The system was unable to program or configure the ingress SPI4.2 device on the line card. This indicates an internal hardware error.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPIRX-3-SPA_INTERRUPT: SPA [int] - [chars], SPA Int status = 
[hex] 

Explanation    A SPA interrupt occurred from the ingress SPI4.2 device.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPIRX-3-SRAM_ERROR_DATA: 
SRAM[dec] Address = [hex][hex] Data = [hex][hex][hex]_[hex][hex][hex]_[hex][hex][hex]_[hex][hex][hex]

Explanation    An SRAM address and data dump is displayed.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPIRX-3-SRAM_INTERRUPT: [chars], Sram Int status = [hex] 

Explanation    An SRAM interrupt occurred from the ingress SPI4.2 device.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPIRX-3-STATUS_INTERRUPT: [chars], Global Int status = [hex] 

Explanation    A status interrupt occurred from the ingress SPI4.2 device.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

SIP200_SPITX Messages

This section contains SPA Interface Processor 200 (SIP200) SPI4.2 bus egress interface messages.

SIP200_SPITX-3

Error Message    %SIP200_SPITX-3-BADDESC: descriptor [hex], tag [hex], global channel 
[int] 

Explanation    The egress SPI4.2 device on the line card returns a descriptor entry that is corrupted.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-BADPAK: corrupted packet to [chars] 

Explanation    The egress SPI4.2 device on the line card is handling a packet that is corrupted. This indicates an internal software error. The corrupted packet is dropped.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-CHANNEL_ENABLE_FAIL: SPI4 Channel [int] for Bay [int], 
[chars] Failed 

Explanation    The system was unable to enable or disable a given SPI4 channel.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-DESCR_ERR_SPA0: SPAstatus=[hex], syndrome=[hex], 
RdRspOvf=[int], RdRspTo=[int], OvfVal=[int], OvfCh=[int], OvfDescHi=[hex], 
OvfDescLo=[hex], DisChk=[int], SeqErrVal=[int], SeqErrCh=[int] 

Explanation    The egress SPI4.2 device on the line card detected a sequence or FIFO overflow error while processing a transmit descriptor. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-DESCR_ERR_SPA1: SPAstatus=[hex], syndrome=[hex], 
RdRspOvf=[int], RdRspTo=[int], OvfVal=[int], OvfCh=[int], OvfDescHi=[hex], 
OvfDescLo=[hex], DisChk=[int], SeqErrVal=[int], SeqErrCh=[int] 

Explanation    The egress SPI4.2 device on the line card detected a sequence or FIFO overflow error while processing a transmit descriptor. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-DESCR_ERR_SPA2: SPAstatus=[hex], syndrome=[hex], 
RdRspOvf=[int], RdRspTo=[int], OvfVal=[int], OvfCh=[int], OvfDescHi=[hex], 
OvfDescLo=[hex], DisChk=[int], SeqErrVal=[int], SeqErrCh=[int] 

Explanation    The egress SPI4.2 device on the line card detected a sequence or FIFO overflow error while processing a transmit descriptor. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-DESCR_ERR_SPA3: SPAstatus=[hex], syndrome=[hex], 
RdRspOvf=[int], RdRspTo=[int], OvfVal=[int], OvfCh=[int], OvfDescHi=[hex], 
OvfDescLo=[hex], DisChk=[int], SeqErrVal=[int], SeqErrCh=[int] 

Explanation    The egress SPI4.2 device on the line card detected a sequence or FIFO overflow error while processing a transmit descriptor. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-DMA_SQERR: Syndrome=[hex], SPA=[int], Ch=[int], 
RdSz=[int], RdOff=[int][chars] 

Explanation    The egress SPI4.2 device on the line card detected a sequence error while processing a DMA operation. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFC_ERR_SPA0: SPAstatus=[hex][chars] 

Explanation    The egress data path device on the line card detected an error condition with the extended flow control bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFC_ERR_SPA1: SPAstatus=[hex][chars] 

Explanation    The egress data path device on the line card detected an error condition with the extended flow control bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFC_ERR_SPA2: SPAstatus=[hex][chars] 

Explanation    The egress data path device on the line card detected an error condition with the extended flow control bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFC_ERR_SPA3: SPAstatus=[hex][chars] 

Explanation    The egress data path device on the line card detected an error condition with the extended flow control bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFCEVNT_ERR: [chars] 

Explanation    The egress data path device on the line card detected an error while processing internal extended flow-control events. This condition could cause a reduced packet rate.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFC_QUEUE_STUCK: [chars] 

Explanation    The egress data path device on the line card detected an error condition with the extended flow control bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFCSTAT_FAIL_SPA0: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an EFC status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFCSTAT_FAIL_SPA1: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an EFC status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFCSTAT_FAIL_SPA2: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an EFC status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-EFCSTAT_FAIL_SPA3: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an EFC status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-FCSTAT_FAIL_SPA0: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an SPI4.2 status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-FCSTAT_FAIL_SPA1: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an SPI4.2 status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-FCSTAT_FAIL_SPA2: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an SPI4.2 status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-FCSTAT_FAIL_SPA3: [chars] 

Explanation    The egress SPI4.2 device on the line card detected an SPI4.2 status clock or synchronization failure. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-INITFAIL: Failed to configure the egress SPI4.2 
device. Error = [hex] 

Explanation    The system was unable to program or configure the egress SPI4.2 device on the line card. This indicates an internal hardware error.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-INT_PERR_SPA0: IntMemPerr=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an internal memory parity error. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-INT_PERR_SPA1: IntMemPerr=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an internal memory parity error. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-INT_PERR_SPA2: IntMemPerr=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an internal memory parity error. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-INT_PERR_SPA3: IntMemPerr=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an internal memory parity error. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-MISMATCH: Descriptor ring mismatch: expects [int] got 
[int] 

Explanation    The egress SPI4.2 device on the line card returns a descriptor entry that does not match what the line card CPU expects. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-OVERRUN_DROP: SPI4 overrun drops packet for SPA [int], 
queue [int], count [int] 

Explanation    While the egress SPI4.2 device on the line card sends an packet on the extended flow controlled channel, it overruns the SPI4 channel but cannot queue it to the internal hold queue. This indicates an internal software error.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-SPI4_ERR_SPA0: SPAstatus=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an error condition with the SPI4.2 bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-SPI4_ERR_SPA1: SPAstatus=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an error condition with the SPI4.2 bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    SIP200_SPITX-3-SPI4_ERR_SPA2: SPAstatus=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an error condition with the SPI4.2 bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-SPI4_ERR_SPA3: SPAstatus=[hex][chars] 

Explanation    The egress SPI4.2 device on the line card detected an error condition with the SPI4.2 bus interface. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

Error Message    %SIP200_SPITX-3-SRAM_ECCERR: EccSynd=[hex], Err1bit=[int], 
ErrMbit=[int], SecHalf=[int], SPA=[int], Ch=[int], Addr=[hex], DataHi=[hex], 
DataLo=[hex], DataEcc=[hex] 

Explanation    The egress SPI4.2 device on the line card detected a a parity error in the egress packet memory. This condition could cause packet drops.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show tech-support command for the line card and the show platform hardware spi4 spa-id efc channel [channel-id] command for the SPA.

SIP400 Messages

This section contains SPA Interface Processor 400 (SIP400) messages.

SIP400-2

Error Message    %SIP400-2-IOBUS_ERROR: IO bus error occurred: [chars] last addr [hex] 
data [hex] tran [hex] 

Explanation    There was a communication problem with a device on the I/O bus.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP400-2-PCI_BUS_ERROR: A PCI Bus Error occurred while trying to 
access a device (status reg = [hex], addstatus reg = [hex]) 

Explanation    There was a problem with a PCI read access to a device that caused a bus error on the host processor.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP400-2-PCI_ERROR_INT: A PCI Error interrupt occurred while trying 
to access a device (status reg = [hex], addstatus reg = [hex]) 

Explanation    There was a problem with a PCI write access to a device that caused a PCI error interrupt.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP600 Messages

This section contains SPA Interface Processor 600 (SIP600) messages.

SIP600-2

Error Message    %SIP600-2-DEVMGR_ASIC_INIT_FAILED: SIP-600 ASIC Initialization failed 
at stage-asic_init[dec] 

Explanation    The SIP-600 received an error during initialization when attempting to initialize the ASICs that make up the forwarding hardware. A hardware problem has prevented the SIP-600 from fully initializing on the target line card. This will result in packets not being forwarded.

Recommended Action    Attempt to reload the line card. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-2-DEVMGR_PROC_CREATE_FAILED: SIP-600 Initialization failed to 
create a required IOS process[dec] 

Explanation    The SIP-600 received an error during initialization when attempting to create the ASIC stage2 initialization process. A potential memory or other software resource problem has prevented the SIP-600 from fully initializing on the target line card. This will result in packets not being forwarded.

Recommended Action    Attempt to reload the line card. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-2-INITFAIL: SIP-600 Initialization Failed - [chars]: [chars] 
[dec] [dec] 

Explanation    The SIP-600 could not initialize the memory that is needed for the feature specified in the message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-2-NULL_OBJECT: Missing device object ([chars]) for pending 
interrupt 

Explanation    A hardware device asserted an interrupt to report an event, but there is no device object for this device.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-2-NULL_SPA_BAY_OBJECT: SPA Bay [dec] is missing 

Explanation    A SPA bay object is missing.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-2-PE_BUS_UNRECOVERABLE_INT: Packet Engine Unrecoverable Bus 
Interrupt: [chars] = [hex] 

Explanation    A packet engine unrecoverable bus interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-2-QUPDATE: SIP-600 Update Queue Hardware Failed - [chars]: 
[chars] [dec] Cause: [hex] 

Explanation    The SIP-600 received an error on the specified hardware queue when attempting the specified action. A hardware problem has prevented system queues from being updated on the target line card. This could result in packets not being forwarded.

Recommended Action    Reload the line card. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-2-UNRECOVERABLE_FAILURE: SIP-600 Unrecoverable Failure 

Explanation    An unexpected fatal condition has occurred on the SIP-600. The message that was previously received on the console or in the system log should provide more information on the specific nature of the problem. This message indicates a hardware failure or malfunction. The system will reload to attempt to fix the problem.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP600-3

Error Message    %SIP600-3-IO_BUS_ERR_INT: IO Bus Error Interrupt: [hex] - Deadman 
Timer = [hex] Trans Status = [hex] Last Address = [hex] Last Data = [hex] 

Explanation    An I/O bus error interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-NMI: NMI Reset Status = [hex] 

Explanation    A nonmaskable interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-NOMEM: [chars] 

Explanation    The SIP-600 card could not obtain statistics due to insufficient memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-NO_STATID: PXF([dec]): no stat_id is available for 
statistics collection 

Explanation    The SIP-600 line card has used up all statistics collection resources. No more resources are available for further statistics collection.

Recommended Action    Reduce number of features configured on this PXF. If conditions warrant, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-NO_STAT_PROCESS: Failed to create statistics process 

Explanation    The SIP-600 card failed to create a statistics process. All statistics counters will be zero.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-PE_BUS_ERR_INT: Packet Engine Bus Error Interrupt: [chars] 

Explanation    A packet engine bus error interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-PE_SPA_BUS_ERR_INT: SPA Bus Error Interrupt: SPA Bus Error 
Status ([hex]) = [hex], SPA Bus Trans Status ([hex]) = [hex], SPA Bus Last Data 
([hex]) = [hex] 

Explanation    A SPA bus error interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-PE_UNEXPECTED_INT: Unexpected Packet Engine Interrupt: 
[chars] 

Explanation    An unexpected packet engine interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-SIP10G_GEN_DEV_ERR: [chars] unexpected error: [chars] 

Explanation    The software driver for the specified SIP-600 device has detected the specified unexpected condition.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-STATID_INCONSISTENCY: PXF([dec]):Inconsistent stats 
id([hex]) [int] packets dropped. 

Explanation    A WAN line card has received inconsistent statistics from PXF. PXF reported that one or more packets have been dropped, but no corresponding packet count has been reported.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-UNEXPECTED_GLOBAL_INT: Unexpected Global Interrupt: [chars] 

Explanation    An unexpected global interrupt has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-3-UNSUPPORTED_LABEL_RANGE: The maximum label range configured 
for this system exceeds
the [int] limit supported by the OSM module.

Explanation    The MPLS label range that was configured for this system is not supported. The maximum label range limit is specified in the message.

Recommended Action    Change the maximum MPLS label range by entering the mpls label range command.

SIP600-4

Error Message    %SIP600-4-INVALID_STATID: PXF:Invalid-Statid ([dec]) for vc [int] 
under interface [int] 

Explanation    The SIP-600 line card has encountered an internal error while setting up the statistics report subsystem.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-4-MR_CFG_ALL_PORTS: CFM configuration is global to sip-600 and 
applies to all ports 

Explanation    An SCP message to configure match register functionality on the specified port will apply to all ports on the MSC-600 card as match register configurations are done on the parsing engine.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600-4-SIP10G_PXF_IRAM_PARITY_ERROR: Correcting a PXF instruction 
error.

Explanation    This is a Parallel Express Forwarding (PXF) error message that indicates a detection and correction of a typically rare event. If the error is persistent, it may indicate faulty hardware.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP600-6

Error Message    %SIP600-6-NULLQID: PXF([dec]):Null-QID ([chars]) [int] packets 
dropped. 

Explanation    The SIP-600 line card has encountered an invalid queue. The packet has been dropped. The packet will be counted in the null queue statistics. Packet traffic should continue normally.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP600_PARSING_ENGINE Messages

This section contains SIP-600 parsing engine messages.

Error Message    %SIP600_PARSING_ENGINE-3-DROP_FIFO_OVERFLOW: Parsing Engine Drop Fifo 
Overflow 

Explanation    The SIP-600 parsing engine has detected that the drop FIFO queue has exceeded the maximum limit. New updates will be discarded. The parsing engine continues to process data from the interfaces if possible.

Recommended Action    If traffic has resumed, no action is required. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_PARSING_ENGINE-3-INTERRUPT_ERROR: [chars] 

Explanation    The SIP-600 parsing engine has detected the specified interrupt event. The message text on the console or in the system log provides more information on this error. The parsing engine continues to process data from the interfaces, if possible.

Recommended Action    If traffic has resumed, no action is required. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_PARSING_ENGINE-3-MASTER_ABORT: Parsing Engine CPU Master Abort 
Error 

Explanation    The SIP-600 parsing engine has detected a CPU Master Abort Interrupt. A read to a write-only register or a write to a read-only register could cause this interrupt. The parsing engine continues to process data from the interfaces, if possible.

Recommended Action    If traffic has resumed, no action is required. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_PARSING_ENGINE-3-PARITY_ERROR: Parsing Engine CPU Parity Error 

Explanation    The SIP-600 parsing engine has detected a CPU parity error. A hardware fault is suspected on the second occurrence only. Otherwise, the parsing engine continues to process data from the interface if possible.

Recommended Action    If traffic has resumed, no action is required. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_PARSING_ENGINE-3-RP_INT_WATCHDOG_TIMEOUT: Parsing Engine RP 
Interface Watchdog Timeout 

Explanation    The SIP-600 parsing engine has detected an RP interface watchdog timeout. The RP interface process has not relinquished the processor for the watchdog timeout period. The parsing engine continues to process data from the interfaces, if possible.

Recommended Action    If traffic has resumed, no action is required. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP600_QOS Messages

This section contains SPA Interface Processor 600 quality of service (SIP600_QOS) messages.

SIP600_QOS-2

Error Message    %SIP600_QOS-2-INITFAIL: SIP-600 Initialization Failed [chars]: [chars] 
[dec] [dec] 

Explanation    The SIP-600 could not initialize the memory that is needed for the QoS feature. A hardware problem has occurred on the line card that prevents QoS from functioning.

Recommended Action    If QoS is a desired feature, try to reload the line card. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_QOS-2-NOMEM: Memory Allocation Failure - [chars]: [chars] 
[dec] [dec] 

Explanation    SIP-600 could not allocate the memory that is required for the QoS feature. This condition might indicate that more memory must be installed on the affected line card or platform to service all features and related entries that are enabled in the configuration.

Recommended Action    Check available memory and install more if necessary. If sufficient memory is available, reload the Cisco IOS image on the affected line card or platform. If the error persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

SIP600_QOS-3

Error Message    %SIP600_QOS-3-CLASSIFYUPDATE: SIP-600 Update QoS Classify Hardware 
Failed - [chars]: [chars] [dec] Cause: [hex] 

Explanation    SIP-600 received an error on the specified hardware classify entry when attempting the specified action.

Recommended Action    If the error occurs on allocating any of the Default Classify Entries, attempt to reload the line card because traffic cannot be forwarded out this line card. If the error occurs in all other cases, remove the QoS action just performed at the user interface, wait a period of time, then reapply the service-policy. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_QOS-3-EXCEEDEXCESSQRATE: SIP-600 Exceeded system maximum 
excess queue rates - [chars]: [chars] [dec] Cause: [hex] 

Explanation    The SIP-600 received an error on the specified hardware queue when attempting the specified action. This condition is the result of attempting to configure a QoS action. The sum of excess bandwidth for all allocated queues has exceeded the system limit.

Recommended Action    Remove the service policy that failed and try applying the shape command to each of the classes if they are not already configured. Then reapply the service policy. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_QOS-3-EXCEEDGUARTQRATE: SIP-600 Exceeded Guaranteed Rates on 
interface - [chars]: [chars] [dec] Cause: [hex] 

Explanation    The SIP-600 received an error on the specified hardware queue when attempting the specified action. This condition is the result of attempting to configure a QoS action. The sum of all queue-guaranteed rates has exceeded the maximum that can be configured for the interface to which the queues are applied. This condition could be caused when the priority command is configured without the police command.

Recommended Action    Add the police command to limit the rate of the priority queue. If this is not the problem, remove the service policy and reapply it. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_QOS-3-INSUFFDFLTBW: SIP-600 Insufficient bandwidth for default 
processing: port [dec] queue id [dec] Cause: [hex] 

Explanation    The SIP-600 reserves 1 percent of the bandwidth of a port for router control packets. When a service policy is applied, this bandwidth is first deducted from the QoS class default queue. If there is not sufficient bandwidth in the class default queue and the sum of queue-guaranteed bandwidth exceeds the link rate, this message is generated instead of the EXCEEDGUARTQRATE message.

Recommended Action    Determine if there is any bandwidth available for class default so that space is made available for the port's queue to handle control packets. Reduce the amount of bandwidth configured on user-defined classes so that more bandwidth is available for class default. If necessary, explicitly configure bandwidth for class default by entering the bandwidth command. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_QOS-3-NORESOURCE: SIP-600 Out of Resources- [chars]: [chars] 
[dec] Cause: [hex] 

Explanation    The specified resource has been depleted from the SIP-600.

Recommended Action    Change the SIP-600 configuration to conserve the specified resource.

Error Message    %SIP600_QOS-3-NOTFOUND: SIP-600 Software Element Not Found - [chars]: 
[chars] [dec] 

Explanation    SIP-600 client could not locate a required software element.

Recommended Action    Reload the Cisco IOS image on the affected line card or platform. If the error persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %SIP600_QOS-3-NOTSUP: SIP-600 Feature Not Supported - [chars]: [chars] 
[chars] 

Explanation    The SIP-600 does not support the specified feature.

Recommended Action    Change the SIP-600 configuration so that it does not include the specified feature.

Error Message    %SIP600_QOS-3-QEXCEEDWREDGRP: SIP-600 Exceeded WRED limit groups for 
queue [dec] 

Explanation    The SIP-600 depleted available resources when configuring WRED on the specified hardware queue. This condition is a result of attempting to configure a QoS action.

Recommended Action    For each queue, there is a limited number of unique WRED limits sets that can be configured. The user's configuration action has caused the limits to go beyond the system limit. As a result, WRED is not configured on that queue. The following configuration illustrates three unique sets of WRED min/max limits:

random-detect
random-detect prec 0 1000 2000 1
random-detect prec 1 1000 2000 1
random-detect prec 2 2000 3000 1
random-detect prec 3 2000 3000 1
random-detect prec 4 1000 2000 1
random-detect prec 5 3000 4000 1
random-detect prec 6 2000 3000 1
random-detect prec 7 3000 4000 1

Update your configuration so that the WRED configuration is within the limits and reapply the service policy.

Error Message    %SIP600_QOS-3-QUPDATE: SIP-600 Update Queue Hardware Failed - [chars]: 
[chars] [dec] Cause: [hex] 

Explanation    The SIP-600 received an error on the specified hardware queue when attempting the specified action. This condition is the result of attempting to configure a QoS action.

Recommended Action    There are a variety of reasons that this condition occurs: 1) If the user configuration action was to remove a service policy and then reapply a service policy to the same interface, it is possible that queues are still draining, which prevents new queues from being allocated. You need to remove the service-policy that failed, wait for a period of time, and then reapply the service policy. 2) It is possible that the number of resources has been depleted. You can consolidate your current QoS configuration to free up resources, and then try reapplying your new configuration. 3) If the error was the result of removing queue hardware, then there is a hardware problem that must be reported. If the problem persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/la