FHRP—Enhanced Object Tracking of IP SLAs

Table Of Contents

FHRP—Enhanced Object Tracking of IP SLAs

FHRP—Enhanced Object Tracking of IP SLAs

---

The FHRP—Enhanced Object Tracking of IP SLAs feature enables First Hop Redundancy Protocols (FHRPs) and other Enhanced Object Tracking (EOT) clients to track the output from IP SLAs objects and use the provided information to trigger an action.

•FHRP—Enhanced Object Tracking of IP SLAs Operations

•Tracking IP SLAs Operations

Configuration Information

Configuration information is included in the "Configuring Enhanced Object Tracking" module of the Cisco IOS IP Application Services Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiapp_c/index.htm

The following sections provide information about this feature:

•FHRP—Enhanced Object Tracking of IP SLAs Operations

•Tracking IP SLAs Operations

For a complete list of features included in the "Configuring Enhanced Object Tracking" module, see the Feature Information Table located toward the end of the module.

Command Reference Information

Command reference information is included in the Cisco IOS IP Application Services Command Reference, Release 12.2SX, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sx/cr/sxiap_r/index.htm

New or Modified Commands

The following command was introduced by this feature:

•track rtr

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.