Guest

Cisco IOS Software Releases 12.2 SX

BGP MIB Support Enhancements

  • Viewing Options

  • PDF (92.7 KB)
  • Feedback
BGP MIB Support Enhancements

Table Of Contents

BGP MIB Support Enhancements

Configuration Information

Command Reference Information


BGP MIB Support Enhancements


The BGP MIB Support Enhancements feature introduces support in the CISCO-BGP4-MIB for new SNMP notifications.

Configuration Information

Configuration information is included in the "Configuring Advanced BGP Features" module of the Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tbgp_c/brbadv.htm

The following sections provide information about this feature:

BGP MIB Support

Enabling BGP MIB Support

Enabling BGP MIB Support: Example

For a complete list of features included in the "Configuring Advanced BGP Features" module, see the Feature Information table located toward the end of the module.

Command Reference Information

Release 12.2SX

The following commands are new or modified for this feature:

snmp-server enable traps bgp

Detailed information about these commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SX, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sx/cr/sxipr_r/index.htm


Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.