Radius Tunnel Preference for Load Balancing and Fail-Over

Available Languages

Download Options

  • PDF     (134.4 KB)
    View with Adobe Reader on a variety of devices
Updated:February 23, 2006

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Radius Tunnel Preference for Load Balancing and Fail-Over

Table Of Contents

Radius Tunnel Preference for Load Balancing and Fail-Over


Radius Tunnel Preference for Load Balancing and Fail-Over

The Radius Tunnel Preference for Load Balancing and Fail-Over feature provides industry-standard load balancing and failover functionality for multivendor networks. A consensus regarding the tunnel attributes that are to be used in a multivendor network environment is defined in RFC-2868. This feature allows the Tunnel-Preference attribute defined in RFC-2868 to be used to form load balancing and failover tunnel server groups.

Configuration Information

Configuration information is included in the "Configuring AAA for VPDNs" module in the Cisco IOS VPDN Configuration Guide, Release 12.4T, at the following URL:

•http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tvpdn_c/vpc2auht.htm

Command Reference

No commands were modified by this feature.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products