L2TP Tunnel Connection Speed Labeling

Available Languages

Download Options

  • PDF     (144.5 KB)
    View with Adobe Reader on a variety of devices
Updated:February 15, 2008

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

L2TP Tunnel Connection Speed Labeling

Table Of Contents

L2TP Tunnel Connection Speed Labeling


L2TP Tunnel Connection Speed Labeling

The L2TP Tunnel Connection Speed Labeling feature introduces the ability to accept or deny a Layer 2 Tunneling Protocol (L2TP) session based on the allowed connection speed that is configured on the Cisco Access Registrar (AR) RADIUS server for that user. The administrator can configure an AR RADIUS server to authorize users based on their Service Level Agreement (SLA). Tunnel connection speed information is forwarded to the AR RADIUS server by default.

Configuration Information

Configuration information is included in the "Configuring AAA for VPDNs" module in the Cisco IOS VPDN Configuration Guide, Release 12.4T, at the following URL:

•http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tvpdn_c/vpc2auht.htm

Command Reference

No commands are modified.

Was this Document Helpful?

FeedbackFeedback

Let Us Help