Guest

Cisco IOS Software Releases 12.2 SB

BGP Selective Address Tracking

  • Viewing Options

  • PDF (173.5 KB)
  • Feedback
BGP Selective Address Tracking

Table Of Contents

BGP Selective Address Tracking


BGP Selective Address Tracking


The BGP Selective Address Tracking feature introduces the use of a route map for next-hop route filtering and fast session deactivation. Selective next-hop filtering uses a route map to selectively define routes to help resolve the BGP next hop. A route map can be used to determine if a peering session with a BGP neighbor should be reset when a route to the BGP peer changes.

Configuration Information

Configuration information is included in the "Configuring Advanced BGP Features" module of the Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_adv_features_ps6441_TSD_Products_Configuration_Guide_Chapter.html

The following sections provide information about this feature:

Selective BGP Next-Hop Route Filtering

Configuring BGP Selective Next-Hop Route Filtering

Configuring BGP Selective Next-Hop Route Filtering: Examples

Configuration information is also included in the "Configuring BGP Neighbor Session Options" module of the Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_neighbor_ps6441_TSD_Products_Configuration_Guide_Chapter.html

The following sections provide information about this feature:

Selective Address Tracking for BGP Fast Session Deactivation

Configuring Selective Address Tracking for Fast Session Deactivation

Configuring Selective Address Tracking for Fast Session Deactivation: Example

For a complete list of features included in the "Configuring Advanced BGP Features" and the "Configuring BGP Neighbor Session Options" modules, see the Feature Information Table located toward the end of the modules.

Command Reference Information

Command reference information is included in the Cisco IOS IP Routing: BGP Command Reference at the following URL:

http://www.cisco.com/en/US/docs/ios/iproute_bgp/command/reference/irg_book.html

New or Modified Commands

The following commands are new or modified for this feature:

bgp nexthop

neighbor fall-over