Cisco IOS Switching Services Command�Reference, Release�12.2
Switching Commands: Introduction
Downloads: This chapterpdf (PDF - 102.0KB) The complete bookPDF (PDF - 4.13MB) | Feedback

Cisco IOS Switching Commands

Table Of Contents

Cisco IOS Switching Commands


Cisco IOS Switching Commands


This book describes the basic commands used to configure switching features in Cisco IOS software. Refer to the configuration chapter indicated here for configuration guidelines:

For guidelines about configuring this switching feature...
Refer to the following chapters in the Cisco IOS Switching Services Configuration Guide...

Cisco IOS Switching Paths

"Switching Paths Overview" chapter

"Configuring Fast Switching" chapter

"Cisco Express Forwarding Overview" chapter

"Configuring Cisco Express Forwarding" chapter

NetFlow

"NetFlow Overview" chapter

"Configuring NetFlow" chapter

Multiprotocol Label Switching

"Multiprotocol Label Switching Overview" chapter

"Configuring Multiprotocol Label Switching" chapter

Multilayer Switching

"Multilayer Switching Overview" chapter

"Configuring IP Multilayer Switching" chapter

"Configuring IP Multicast Multilayer Switching" chapter

"Configuring IPX Multilayer Switching" chapter

Multicast Distributed Switching

"Configuring Multicast Distributed Switching" chapter

Virtual LANs

"Routing Between Virtual LANs Overview" chapter

"Configuring Routing Between VLANs with Inter-Switch Link Encapsulation" chapter

"Configuring Routing Between VLANs with IEEE 802.10 Encapsulation" chapter

"Configuring Routing Between VLANs with IEEE 802.1Q Encapsulation" chapter

LAN Emulation

"LAN Emulation Overview" chapter

"Configuring LAN Emulation" chapter

"Configuring Token Ring LAN Emulation" chapter

"Multiprotocol over ATM Overview" chapter

"Configuring the Multiprotocol over ATM Client" chapter

"Configuring the Multiprotocol over ATM Server" chapter

"Configuring Token Ring LAN Emulation for Multiprotocol over ATM" chapter