Cisco IOS Interface Command�Reference, Release�12.2
Interface Commands - Introduction
Downloads: This chapterpdf (PDF - 98.0KB) The complete bookPDF (PDF - 5.0MB) | Feedback

Interface Commands

Table Of Contents

Interface Commands


Interface Commands


This book describes the basic commands that can be used on different types of interfaces. These commands correspond to the interface configuration tasks included in the Cisco IOS configuration guides. Refer to the configuration guide indicated here for configuration guidelines:

For information about this type of interface . . .
Refer to this publication . . .

General interface

"Interface Configuration Overview" chapter in the Cisco IOS Interface Configuration Guide

LAN interface

"Configuring LAN Interfaces" chapter in the Cisco IOS Interface Configuration Guide

Serial interface

"Configuring Serial Interfaces" chapter in the Cisco IOS Interface Configuration Guide

Logical interface

"Configuring Logical Interfaces" chapter in the Cisco IOS Interface Configuration Guide

Cisco Mainframe Channel Connection (CMCC) adapters

"Configuring Cisco Mainframe Channel Connection Adapters" chapter in the Cisco IOS Bridging and IBM Networking Configuration Guide

Dialer interface and virtual-access interface

Cisco IOS Dial Services Configuration Guide and Cisco IOS Dial Technologies Command Reference

ISDN PRI interface

Cisco IOS Dial Technologies Configuration Guide and Cisco IOS Dial Technologies Command Reference


Other interface commands, specific to a particular technology area, are described in the technology specific configuration guides. For example, for hardware technical descriptions, and for information about installing the router or access server interfaces, refer to the hardware installation and maintenance publication for your particular product.