Table Of Contents
TCP MSS Adjust
TCP MSS Adjust
The TCP MSS Adjust feature enables the configuration of the maximum segment size (MSS) for transient packets that traverse a router, specifically TCP segments with the synchronize/start (SYN) bit set.
Configuration information is included in the "Configuring TCP" module of the Cisco IOS IP Application Services Configuration Guide, at the following URL:
The following sections provide information about this feature:
•TCP MSS Adjustment
•Configuring the MSS Value and MTU for Transient TCP SYN Packets
•TCP MSS Adjustment Configuration: Examples
For a complete list of features included in the "Configuring TCP" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS IP Application Services Command Reference, at the following URL:
New or Modified Commands
The following command is modified for this feature:
•ip tcp adjust-mss
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:
List of All New, Modified, Removed, and Replaced Release 12.4T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.