Guest

Cisco IOS Software Releases 12.0 S

Cross-Platform Release Notes for Cisco IOS Release 12.0S, Part 1: System Requirements

  • Viewing Options

  • PDF (511.8 KB)
  • Feedback
Cross-Platform Release Notes for Cisco IOS Release 12.0S

Table Of Contents

Cross-Platform Release Notes for Cisco IOS Release 12.0S

Contents

Introduction

System Requirements

Hardware Supported

Supported Platforms

Supported Port Adapters for the Cisco 7200 Series and Cisco 7500/RSP Series Routers

Supported Line Cards for the 10000 Series Routers

Supported Modules for the 10720 Router

Supported Line Cards for the 12000 Series Routers

Determining Your Software Release

Upgrading to a New Software Release

Upgrading Software on Redundant PREs

Microcode Software

Microcode Software for the Cisco 7500/RSP Series

Shared Port Adapter FPD Image Packages for the Cisco 12000 Series

Feature Support

Determining the Software Images (Feature Sets) That Support a Specific Feature

Determining the Features Supported in a Specific Software Image (Feature Set)

Memory Recommendations


Cross-Platform Release Notes for Cisco IOS Release 12.0S


March 22, 2013

Cisco IOS Release 12.0(33)S11

OL-1617-14 Rev. Q0

These release notes for the Cisco 7200 series routers, Cisco 7500 series routers, Cisco 10000 series edge services routers, Cisco 10720 Internet router, and Cisco 12000 series Internet routers support Cisco IOS Release 12.0S, up to and including Release 12.0(33)S11.


Note Cisco IOS Release 12.0(33)S does not support the Cisco 12000 series Internet routers. Cisco IOS Release 12.0(33)S1 and later releases do support the Cisco 12000 series Internet routers.



Note The Cisco 7202, Cisco 7204, and Cisco 7206 routers are no longer supported in Cisco IOS Release 12.0S beginning with Cisco IOS Release 12.0(33)S. Cisco 7204VXR and Cisco 7206VXR routers continue to be supported.



Note Cisco IOS Release 12.0(31)S and later releases do not support the Cisco 10000 series edge services routers.


These release notes are updated as needed to describe new features, memory requirements, hardware support, software platform deferrals, and changes to the microcode and related documents.

Cisco IOS Release 12.0S is based on Cisco IOS Release 12.0 and is tailored for service provider environments. Cisco IOS Release 12.0S is the follow-on release to Cisco IOS Release 11.1CC, which was also targeted to the service provider environment. Additionally, many of the features in Cisco IOS Release 12.0S were first introduced for the Cisco 12000 series routers on Cisco IOS Release 11.2GS and for the Cisco 7000 family on Cisco IOS Release 12.0T. Furthermore, Cisco IOS Release 12.0S incorporates all the features that were introduced in Cisco IOS Release 12.0ST up to and including Release 12.0(21)ST.

For a list of the software caveats that apply to Cisco IOS Release 12.0S, see the "Caveats" section and the Caveats for Cisco IOS Release 12.0 document. The caveats document is updated for every maintenance release and is located on Cisco.com.

Use these release notes in conjunction with the Release Notes for Cisco IOS Release 12.0 located on Cisco.com.

We recommend that you view the field notices for this release to see if your software or hardware platforms are affected. If you have an account on Cisco.com, you can find field notices at http://www.cisco.com/warp/customer/tech_tips/index/fn.html. If you do not have a Cisco.com login account, you can find field notices at http://www.cisco.com/warp/public/tech_tips/index/fn.html.

Contents

Introduction

System Requirements

New and Changed Information

MIBs

Limitations and Restrictions

Important Notes

Caveats

Troubleshooting

Related Documentation

Notices

Obtaining Documentation and Submitting a Service Request

Introduction

Cisco IOS Release 12.0(5)S was the first public release of this software. Many of the features and hardware supported in this software have previously been released to customers on other software releases.

As of Cisco IOS Release 12.0(22)S, all the features that were introduced in Cisco IOS Release 12.0ST up to and including Release 12.0(21)ST are incorporated in Cisco IOS Release 12.0S.

For information on new features and Cisco IOS commands supported by Release 12.0S, see the "New and Changed Information" section and the "Related Documentation" section.

System Requirements

This section describes the system requirements for Cisco IOS Release 12.0S and includes the following sections:

Hardware Supported

Determining Your Software Release

Upgrading to a New Software Release

Microcode Software

Feature Support

Memory Recommendations

Hardware Supported

This section consists of the following subsections:

Supported Platforms

Supported Port Adapters for the Cisco 7200 Series and Cisco 7500/RSP Series Routers

Supported Line Cards for the 10000 Series Routers

Supported Modules for the 10720 Router

Supported Line Cards for the 12000 Series Routers

Supported Platforms

Cisco IOS Release 12.0S supports the following platforms:

Cisco 7200 series routers (including the Cisco 7202, Cisco 7204, Cisco 7204 VXR, Cisco 7206, and Cisco 7206 VXR)

Cisco 7000 series routers (including the Cisco 7000 and Cisco 7010) upgraded with the 7000 series Route Switch Processor (RSP7000) and 7000 series Chassis Interface (RSP7000CI)

Cisco 7500 series routers (including the Cisco 7505, Cisco 7507, Cisco 7513, and Cisco 7576)

Cisco 10000 series edge services routers (including the Cisco 10005 and Cisco 10008)

Cisco 10720 Internet router

Cisco 12000 series Internet routers (including the Cisco 12006, Cisco 12008, Cisco 12010, Cisco 12012, Cisco 12016, Cisco 12404, Cisco 12406, Cisco 12410, Cisco 12416, Cisco 12810, and Cisco 12816.)

For additional information about supported hardware for this platform and release, please see the Hardware/Software Compatibility Matrix in the Cisco Software Advisor at the following location:

http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi


Note The Cisco 7202, Cisco 7204, and Cisco 7206 routers are no longer supported in Cisco IOS 12.0S as of Cisco IOS Release 12.0(33)S. The Cisco 7204 VXR, and Cisco 7206 VXR routers continue to be supported.



Note The NPE-100 and NPE-150 Network Process Engines are no longer supported in Cisco IOS 12.0S as of Cisco IOS Release 12.0(28)S.



Note Cisco 10000 Series Edge Services Routers: These routers are supported in Cisco IOS Release 12.0(22)S and later releases.



Note Cisco 10720 Internet Router: This router is supported in Cisco IOS Release 12.0(22)S and later releases.



Note Cisco 12000 Series Internet Routers:

The Cisco 12016 Internet router is supported in Cisco IOS Release 12.0(8)S and later releases.
The Cisco 12416 Internet router is supported in Cisco IOS Release 12.0(15)S and later releases.
The Cisco 12410 Internet router is supported in Cisco IOS Release 12.0(16)S and later releases.
The Cisco 12406 Internet router is supported in Cisco IOS Release 12.0(17)S and later releases.
The Cisco 12404 Internet router is supported in Cisco IOS Release 12.0(21)S and later releases.
The Cisco 12006 Internet router is supported in Cisco IOS Release 12.0(27)S and later releases.
The Cisco 12010 Internet router is supported in Cisco IOS Release 12.0(27)S and later releases.
The Cisco 12810 Internet router is supported in Cisco IOS Release 12.0(31)S and later releases.
The Cisco 12816 Internet router is supported in Cisco IOS Release 12.0(31)S and later releases.

All other Cisco 12000 series Internet routers have been supported from the initial base release of Cisco IOS Release 12.0S onward.

The Cisco 12000 series Internet routers are not supported in Cisco IOS Release 12.0(33)S, but they are supported in Cisco IOS Release 12.0(33)S1 and later releases.



Note In order for Cisco IOS Release 12.0(22)S and later releases to run on the Cisco 10000 series edge services router, the Performance Routing Engine (PRE) installed in the chassis must be the PRE1 version (part number ESR-PRE1). You can verify which PRE is installed in the chassis by using the show version command.


For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

Supported Port Adapters for the Cisco 7200 Series and Cisco 7500/RSP Series Routers

Table 1 lists the port adapters that are supported for the Cisco 7200 series and Cisco 7500/RSP series routers in Cisco IOS Release 12.0S and uses the following conventions:

Yes—The port adapter is supported in the software image.

No—The port adapter is not supported in the software image.

In—The number in the "In" column indicates the Cisco IOS 12.0S release in which the port adapter was introduced. For example, (11) means that a port adapter was introduced in Cisco IOS Release 12.0(11)S. If a cell in this column contains an em dash (—), support for the port adapter was included in the initial base release.

Table 1 Supported Port Adapters for the Cisco 7200 Series and Cisco 7500/RSP Series Routers 

Cisco Product Number 1
Adapter Description
In
7200 Series
7500/RSP
Series
ATM Port Adapters

PA-A1-OC3SM=

1-port ATM OC-3 single mode (IR)

No

Yes

PA-A1-OC3MM=

1-port ATM OC-3 multimode

No

Yes

PA-A2-4T1C-OC3SM=

ATM CES, 4T1 CES ports, 1 OC-3 ATM SM port

Yes

No

PA-A2-4T1C-T3ATM=

ATM CES, 4T1 CES ports, 1 T3 ATM Port

Yes

No

PA-A2-4E1XC-OC3SM=

CES OC-3, 4E1 ports, 120 ohm

Yes

No

PA-A2-4E1XC-E3ATM=

CES E3/E1, 120 ohms

Yes

No

PA-A3-OC3MM

1-port ATM Enhanced OC-3c/STM-1 multimode

Yes

Yes

PA-A3-OC3SMI

1-port ATM Enhanced OC-3c/STM-1 single mode (IR)

Yes

Yes

PA-A3-OC3SML

1-port ATM Enhanced OC-3c/STM-1 single mode (LR)

Yes

Yes

PA-A3-OC12MM=

1-port ATM Enhanced OC-12/STM-4 multimode

(11)

No

Yes

PA-A3-OC12SMI=

1-port ATM Enhanced OC-12/STM-4 single mode (IR)

(11)

No

Yes

PA-A3-E3

1-port ATM Enhanced E3

Yes

Yes

PA-A3-T3

1-port ATM Enhanced DS3

Yes

Yes

PA-A3-8E1IMA

8-port ATM Inverse MUX E1, 120 ohm

(11)

Yes

Yes

PA-A3-8T1IMA

8-port ATM Inverse MUX T1

(11)

Yes

Yes

PA-A6-OC3MM

1-port ATM OC-3c/STM-1 multimode, enhanced

(32)

Yes

Yes

PA-A6-OC3SMI

1-port ATM OC-3c/STM-1 single-mode (IR), enhanced

(32)

Yes

Yes

PA-A6-OC3SML

1-port ATM OC-3c/STM-1 single-mode (LR), enhanced

(32)

Yes

Yes

PA-A6-T3

1-port ATM DS3, enhanced

(32)

Yes

Yes

PA-A6-E3

1-port ATM E3, enhanced

(32)

Yes

Yes

Channel Port Adapters

PA-4C-E=

1-port Enhanced ESCON Channel

Yes

Yes

Channelized Port Adapters

PA-2CE1/PRI-75=

2-port channelized E1/PRI, 75 ohm interface

Yes

Yes

PA-2CE1/PRI-120

2-port channelized E1/PRI, 120 ohm interface

(10)

Yes2

Yes

PA-2CT1/PRI

2-port channelized T1/PRI

(10)

Yes2

Yes

Dynamic Packet Transport (DPT) Port Adapters

PA-SRP-OC12MM=

DPT-OC-12 multimode (Cisco 7200 series only)

(6)

Yes

No

PA-SRP-OC12SMI=

DPT-OC-12 single mode (IR) (Cisco 7200 series only)

(6)

Yes

No

PA-SRP-OC12SML=

DPT-OC-12 single mode (LR) (Cisco 7200 series only)

(6)

Yes

No

PA-SRP-OC12SMX=

DPT-OC-12 single mode extended reach (Cisco 7200 series only)

(9)

Yes

No

SRPIP-OC12MM=

DPT-OC-12 multimode (Cisco 7500 series only)

(6)

No

Yes

SRPIP-OC12SMI=

DPT-OC-12 single mode (IR) (Cisco 7500 series only)

(6)

No

Yes

SRPIP-OC12SML=

DPT-OC-12 single mode (LR) (Cisco 7500 series only)

(6)

No

Yes

SRPIP-OC12SMX=

DPT-OC-12 single mode extended reach (Cisco 7500 series only)

(9)

No

Yes

Ethernet/Fast Ethernet/Gigabit Ethernet Port Adapters

PA-4E

4-Port Ethernet 10BASE-T

Yes

Yes

PA-4E1G/75

4-port E1 G.703 Serial, 75 ohm/unbalanced

Yes

Yes

PA-4E1G/120

4-port E1 G.703 Serial, 120 ohm/balanced

Yes

Yes

PA-5EFL=

5-port Ethernet 10BASE-FL

Yes

Yes

PA-8E

8-port Ethernet 10BASE-T

Yes

Yes

PA-FE-FX=

1-port Fast Ethernet 100BASE-FX

Yes

Yes

PA-FE-TX=

1-port Fast Ethernet 100BASE-TX

Yes

Yes

PA-2FE-FX

2-port Fast Ethernet 100BASE-FX

(15)

Yes

Yes

PA-2FE-TX

2-port Fast Ethernet 100BASE-TX

(15)

Yes

Yes

PA-GE

1-port Gigabit Ethernet

(7)

Yes

No

Fiber Distributed Data Interface (FDDI) Port Adapters

PA-F/FD-MM=

1-port FDDI Full Duplex multimode

Yes

Yes

PA-F/FD-SM=

1-port FDDI Full Duplex single mode

Yes

Yes

High-Speed Serial Port Adapters

PA-H

1-port High-Speed Serial Interface (HSSI)

Yes

Yes

PA-2H

2-port High-Speed Serial Interface (HSSI)

Yes

Yes

Multichannel Serial Port Adapters

PA-MC-T3

1-port multichannel T3

(5)

Yes

Yes

PA-MC-E3

1-port multichannel E3

(5)

Yes

Yes

PA-MC-2T3+

2-port multichannel T3

(6)

Yes

Yes

PA-MC-2T1

2-port multichannel T1, integrated CSU/DSUs

(7)

Yes

Yes

PA-MC-2E1/120

2-port multichannel E1, G.703 120 ohm interface

(7)

Yes

Yes

PA-MC-4T1

4-port multichannel T1, integrated CSU/DSUs

(5)

Yes

Yes

PA-MC-8T1=

8-port multichannel T1, integrated CSU/DSUs

(5)

Yes

Yes

PA-MC-8E1/120=

8-port multichannel E1, G.703 120 ohm interface

(5)

Yes

Yes

PA-MC-8TE1+

8-port multichannel T1/E1 PRI

(22)

Yes

Yes

PA-MC-8DSX1=

8-port multichannel T1 with integrated DSUs

(5)

Yes

Yes

PA-4B-U

4-port BRI, U Interface

Yes

No

PA-8B-S/T

8-port BRI, S/T Interface

Yes

No

Service Adapters

SA-ENCRYPT

Encryption Service Adapter

Yes

Yes

SA-ISA

Integrated Services Adapter for IPSec or MPPE encryption

Yes

No

SA-VAM

VPN Acceleration Module (VAM)

Yes

No

SONET Port Adapters

PA-POS-OC3MM=

1-port Packet-over-SONET OC-3c/STM-1 multimode

Yes

Yes

PA-POS-OC3SMI=

1-port Packet-over-SONET OC-3c/STM-1 single mode (IR)

Yes

Yes

PA-POS-OC3SML=

1-port Packet-over-SONET OC-3c/STM-1 single mode (LR)

Yes

Yes

PA-POS-1OC3

1-port Packet-over-SONET OC-3/STM-1 POS (with APS)

(30)

Yes

Yes

PA-POS-2OC3

2-port Packet-over-SONET OC-3/STM-1 POS (with APS)

(27)

Yes

Yes

T1/E1 Port Adapters

PA-4T+

4-port Serial, Enhanced

Yes

Yes

PA-8T-V35

8-port Serial, V.35

Yes

Yes

PA-8T-X21

8-port Serial, X.21

Yes

Yes

PA-8T-232

8-port Serial, 232

Yes

Yes

T3/E3 Port Adapters

PA-T3=

1-port T3 Serial, T3 DSUs

Yes

Yes

PA-T3+

1-port T3 Serial, Enhanced

Yes

Yes

PA-2T3=

2-port T3 Serial, T3 DSUs

Yes

Yes

PA-2T3+

2-port T3 Serial, Enhanced

Yes

Yes

PA-E3

1-port E3 Serial, E3 DSUs

Yes

Yes

PA-2E3

2-port E3 Serial, E3 DSUs

Yes

Yes

Token Ring Port Adapters

PA-4R-DTR

4-port Dedicated Token Ring, 4/16-Mbps, HDX/FDX

Yes

Yes

1 For a spare product number, append an equal sign (=) to the product number. If a product number is listed as a spare product, only a spare product is available. For End-of-Sale (EOS) and End-of-Life (EOL) information about port adapters, refer to the Cisco product bulletins at the following locations:

Cisco 7200 series: http://www.cisco.com/en/US/products/hw/routers/ps341/prod_eol_notices_list.html
Cisco 7500 series: http://www.cisco.com/en/US/products/hw/routers/ps359/prod_eol_notices_list.html

2 Support on the Cisco 7200 series was introduced in Cisco IOS Release 12.0(14)S.


Supported Line Cards for the 10000 Series Routers

Table 2 lists the line cards that are supported for the Cisco 10000 series routers in Cisco IOS Release 12.0S. The number in the "In" column indicates the Cisco IOS 12.0S release in which the line card was introduced. For example, (22) means that a line card was introduced in Cisco IOS Release 12.0(22)S.

Table 2 Supported Line Cards for the Cisco 10000 Edge Services Router 

Common Abbreviation
Cisco Product Number 1
Line Card Description
In
ATM Line Cards

1-Port OC-12 ATM

ESR-1OC-12-ATM2

1-port OC-12 ATM

(22)

4-Port OC-3 ATM

ESR-4OC3-ATM-SM

4-port OC-3/STM-1 ATM, single mode

(22)

Ethernet Line Cards

1-Port GE

ESR-1GE

1-port Gigabit Ethernet

(22)

1-Port GE Half-Height

ESR-HH-1GE

1-port Gigabit Ethernet half-height

(23)

8-Port FE Half-Height

ESR-HH-8FE-TX

8-port Fast Ethernet half-height

(23)

Half-Height Carrier

ESR-HH-CARRIER

Full-length base carrier for half-height line card

(23)

Channelized Line Cards

1-Port Channelized
OC-12/STM-4

ESR-1COC-12/STM-4-SMI3

1-port channelized OC-12/STM-4 (STS-12), single mode,
intermediate reach

(22)

ESR-1COC-12/STM-4-SML

1-port channelized OC-12/STM-4 (STS-12), single mode,
long reach

(22)

4-Port Channelized
STM-1/OC-3

ESR-4OC3-ChSTM-1/OC-3

4-port channelized OC-3/STM-1 SDH, single mode

(22)

6-Port Channelized T3

ESR-6CT3

6-port channelized T3

(22)

24-Port T1/E1

ESR-24CT1/E1

24-port channelized E1/T1

(22)

Electrical Interface Line Card

8-Port Unchannelized
E3/T3

ESR-8E3/DS3

8-port clear channel E3/DS3 line card

(22)

Packet over SONET (POS)/Synchronous Digital Hierarchy (SDH) Line Cards

1-Port OC-12/STM-4
POS

ESR-1OC-12/P-SMI

1-port OC-12/STS-12c/STM-4 POS/SDH, single mode,
intermediate reach

(22)

ESR-1OC-12/P-SML

1-port OC-12/STS-12c/STM-4 POS, single mode,
long reach

(22)

6-Port OC-3c/STM-1
POS

ESR-6OC3/P-SMI

6-port OC-3c/STS-3c/STM-1 POS/SDH, single mode,
intermediate reach

(22)

ESR-6OC3/P-SML

6-port OC-3c/STS-3c/STM-1 POS/SDH, single mode,
long reach

(22)

1 For a spare product number, append an equal sign (=) to the product number. For End-of-Sale (EOS) and End-of-Life (EOL) information about line cards, refer to the Cisco product bulletins at the following location:

http://www.cisco.com/en/US/products/hw/routers/ps133/prod_eol_notices_list.html

2 The old part number for this line card is ESR-1OC12ATM-SM.

3 The old part number for this line card is ESR-1COC12-SMI.


For troubleshooting and alerts information about port adapters, see the Cisco documents at the following location:

http://www.cisco.com/en/US/products/hw/modules/ps2033/tsd_products_support_troubleshoot_and_alerts.html

Supported Modules for the 10720 Router

Table 3 lists the modules (also referred to as cards) that are supported for the Cisco 10720 in Cisco IOS Release 12.0S. The number in the "In" column indicates the Cisco IOS 12.0S release in which the module was introduced. For example, (22) means that a module was introduced in Cisco IOS Release 12.0(22)S. Note that, before their introduction in Cisco IOS Release 12.0S, most of these modules were introduced in Cisco IOS Release 12.0SP.

Table 3 Supported Line Cards for the Cisco 10720 Internet Router 

Common Abbreviation
Cisco Product Number 1
Module Description
In
Fast Ethernet (FE) an Gigabit Ethernet (GE) Modules

24-Port Fast Ethernet

10720-FE-TX

24-port 10/100 Ethernet access module

(22)

10720-FE-FX-MM

24-port 100 Mbps fiber Ethernet access module,
multimode, 2 km

(22)

10720-FE-FX-SM

24-port 100 Mbps fiber Ethernet access module,
single mode, 15 km

(22)

4-Port Gigabit Ethernet + 8-Port Fast Ethernet

10720-GE-FE-TX

Combined 4-port Gigabit Ethernet 8-port 10/100 Ethernet TX access module

(22)

10720-GE-FE-TX-B

Combined 4-port Gigabit Ethernet 8-port 10/100 Ethernet TX access module, Revision B

(25)

Gigabit Ethernet (GE) Small-Form-Factor Pluggable (SFP) Modules

GE SFP

10720-GE-SFP-SX

GE SFP module—short reach (550 m)

(22)

10720-GE-SFP-LH

GE SFP module—intermediate reach (10 km)

(22)

GLC-ZX-SM

GE SFP module—long reach (70 km)

(23)

SFP-GE-T

GE SFP module—1000BaseT

(31)

SFP-GE-S

GE SFP module—short reach (550 m), extended temperature

(31)

SFP-GE-L

GE SFP module—intermediate reach (10 km), extended
temperature

(31)

Cisco Wavelength Division Multiplexing (CDWM) Small-Form-Factor Pluggable (SFP) Transceiver Modules

CWDM SFP

CWDM-SFP-1470

CWDM SFP module—longwave 1470 nm laser, single mode, gray

(31)

CWDM-SFP-1490

CWDM SFP module—longwave 1490 nm laser, single mode, violet

(31)

CWDM-SFP-1510

CWDM SFP module—longwave 1510 nm laser, single mode, blue

(31)

CWDM-SFP-1530

CWDM SFP module—longwave 1530 nm laser, single mode, green

(31)

CWDM-SFP-1550

CWDM SFP module—longwave 1550 nm laser, single mode, yellow

(31)

CWDM-SFP-1570

CWDM SFP module—longwave 1570 nm laser, single mode, orange

(31)

CWDM-SFP-1590

CWDM SFP module—longwave 1590 nm laser, single mode, red

(31)

CWDM-SFP-1610

CWDM SFP module—longwave 1610 nm laser, single mode, brown

(31)

Packet over SONET (POS)/Synchronous Digital Hierarchy (SDH) Modules

2-Port OC-48/STM-16 POS

10720-SR-LC-POS

2-port OC-48c/STM-16c POS/SDH uplink module, short reach (2 km)

(23)

10720-IR-LC-POS=

2-port OC-48c/STM-16c POS/SDH uplink module,
intermediate reach (15 km)

(23)

10720-LR1-LC-POS

2-port OC-48c/STM-16c POS/SDH uplink module, long reach (40 km)

(23)

10720-LR2-LC-POS

2-port OC-48c/STM-16c POS/SDH uplink module, (extra) long reach (80 km)

(23)

Dynamic Packet Transport (DPT) Modules 2

2-Port OC-48/STM-16 SRP

10720-SR-LC

2-port OC-48c/STM-16c SRP uplink module, short reach (2 km)

(22)

10720-IR-LC

2-port OC-48c/STM-16c SRP uplink module, intermediate reach (15 km)

(22)

10720-LR1-LC

2-port OC-48c/STM-16c SRP uplink module, long reach (40 km)

(22)

10720-LR2-LC

2-port OC-48c/STM-16c SRP uplink module, (extra) long reach (80 km)

(22)

Other Modules

Console/Auxiliary

10720-CON-AUX=

10720 console/auxiliary module

(22)

RPR/SRP

10720-RPR-SFP=

Dual-Mode IEEE 802.17 RPR/SRP uplink module

(30)

1 For a spare product number, append an equal sign (=) to the product number. For End-of-Sale (EOS) and End-of-Life (EOL) information about modules, refer to the Cisco product bulletins at the following location:

http://www.cisco.com/en/US/products/hw/routers/ps147/prod_eol_notices_list.html

2 DPT modules are also referred to as Spatial Reuse Protocol (SRP) modules.


Supported Line Cards for the 12000 Series Routers

Table 4 lists the line cards that are supported for the Cisco 12000 series routers in Cisco IOS Release 12.0S and uses the following conventions:

Yes—The line card is supported in the software image.

No—The line card is not supported in the software image.

In—The number in the "In" column indicates the Cisco IOS 12.0S release in which the line card was introduced. For example, (11) means a that line card was introduced in Cisco IOS Release 12.0(11)S. If a cell in this column contains an em dash (—), support for the line card was included in the initial base release.


Note Line cards with less than 128 MB of memory will not be able to complete the boot process when attempting to upgrade to Cisco IOS Release 12.0(27)S. If a memory upgrade is required, 256 MB is the next recommended configuration, with 128 MB as the minimum configuration requirement.


Table 4 Supported Line Cards for the Cisco 12000 Series Routers 

Common Abbreviation
Cisco Product Number 1
Engine Type 2
Line Card Description
In
Chassis
2.5
Gbps 3
10
Gbps 4
40
Gbps 5
Core Line Cards—Packet over SONET (POS)

1-Port OC-48 POS6

OC48E/POS-SR-SC-B

 2

1-port OC-48c/STM-16c POS/SDH short reach

(10)

 Yes

 Yes

 Yes

OC48E/POS-LR-SC-B

 2

1-port OC-48c/STM-16c POS/SDH long reach

(10)

 Yes

 Yes

 Yes

1-Port OC-48 POS ISE

OC48X/POS-SR-SC

 3

1-port OC-48c/STM-16c POS/SDH ISE short reach

(21)

 Yes

 Yes

 Yes

OC48X/POS-LR-SC

 3

1-port OC-48c/STM -16c POS/SDH ISE long reach

(21)

 Yes

 Yes

 Yes

4-Port7 OC-48 POS ES8

4OC48E/POS-SR-SC9

 4+

4-port OC-48c/STM-16c POS/SDH ES short reach

(15)

 No

 Yes

 Yes

4OC48E/POS-LR-SC10

 4+

4-port OC-48c/STM-16c POS/SDH ES long reach

(15)

 No

 Yes

 Yes

8-Port OC-48 POS11

8OC48/POS-SFP

 6

8-port OC-48c/STM-16c POS/SDH Small Form-Factor Plugable (SFP)

(27)

 No

 Yes

 Yes

1-Port OC-192 POS

OC192R0/POS-SR-SC

 2

1-port OC-192c/STM-64c POS Enabler short reach

(10)

 Yes

 Yes

 Yes

OC192R0/POS-IR-SC

 2

1-port OC-192c/STM-64c POS Enabler intermediate reach

(10)

 Yes

 Yes

 Yes

1-Port OC-192 POS ES8

OC192E/POS-VSR

 4+

1-port OC-192c/STM-64c POS/SDH ES very short reach

(21)

 No

 Yes

 Yes

OC192E/POS-SR-SC

 4+

1-port OC-192c/STM-64c POS/SDH ES short reach

(21)

 No

 Yes

 Yes

OC192E/POS-IR-SC

 4+

1-port OC-192c/STM-64c POS/SDH ES intermediate reach

(21)

 No

 Yes

 Yes

OC192E/POS-LR-SC

 4+

1-port OC-192c/STM-64c POS/SDH ES long reach

(24)

 No

 Yes

 Yes

2-Port OC-192 POS11

2OC192/POS-VSR

 6

2-port OC-192c/STM-64c POS/SDH very short reach

(27)

 No

 Yes

 Yes

2OC192/POS-SR-SC

 6

2-port OC-192c/STM-64c POS/SDH short reach

(27)

 No

 Yes

 Yes

2OC192/POS-IR-SC

 6

2-port OC-192c/STM-64c POS/SDH intermediate reach

(27)

 No

 Yes

 Yes

Edge Line Cards—DS3, E3, and Packet over SONET (POS)

6-Port DS312

6DS3-SMB-B

 0

6-port DS3 with ECC

(10)

 Yes

 Yes

 Yes

12-Port DS312

12DS3-SMB-B

 0

12-port DS3 with ECC

(10)

 Yes

 Yes

 Yes

6-Port E312

6E3-SMB

 0

6-port E3 with ECC

(15)

 Yes

 Yes

 Yes

12-Port E312

12E3-SMB

 0

12-port E3 with ECC

(15)

 Yes

 Yes

 Yes

8-Port OC-3 POS

8OC3/POS-SM

 2

8-port OC-3c/STM-1c POS/SDH single mode

(10)

 Yes

 Yes

 Yes

8OC3/POS-MM

 2

8-port OC-3c/STM-1c POS/SDH multimode

(10)

 Yes

 Yes

 Yes

16-Port OC-3 POS

16OC3/POS-SM

 2

16-port OC-3c/STM-1c POS/SDH single mode

(10)

 Yes

 Yes

 Yes

16OC3/POS-MM

 2

16-port OC-3c/STM-1c POS/SDH multimode

(10)

 Yes

 Yes

 Yes

4-Port7 OC-3 POS

LC-4OC3/POS-SM

 0

4-port OC-3c/STM-1c POS/SDH single mode

(5)

 Yes

 Yes

 Yes

LC-4OC3/POS-MM

 0

4-port OC-3c/STM-1c POS/SDH multimode

(5)

 Yes

 Yes

 Yes

4OC3/POS-LR-SC

 0

4-port OC-3c/STM-1c POS/SDH long reach

(5)

 Yes

 Yes

 Yes

4-Port7 OC-3 POS ISE

4OC3X/POS-MM-MJ-B

 3

4-port OC-3c/STM-1c POS/SDH ISE multimode

(22)

 Yes

 Yes

 Yes

4OC3X/POS-IR-LC-B

 3

4-port OC-3c/STM-1c POS/SDH ISE intermediate reach

(22)

 Yes

 Yes

 Yes

4OC3X/POS-LR-LC-B

 3

4-port OC-3c/STM-1c POS/SDH ISE long reach

(22)

 Yes

 Yes

 Yes

8-Port OC-3 POS ISE

8OC3X/POS-MM-MJ-B

 3

8-port OC-3c/STM-1c POS/SDH ISE multimode

(22)

 Yes

 Yes

 Yes

8OC3X/POS-IR-LC-B

 3

8-port OC-3c/STM-1c POS/SDH ISE intermediate reach

(22)

 Yes

 Yes

 Yes

16-Port OC-3 POS ISE

16OC3X/POS-M-MJ-B

 3

16-port OC-3c/STM-1c POS/SDH ISE multimode

(22)

 Yes

 Yes

 Yes

16OC3X/POS-I-LC-B

 3

16-port OC-3c/STM-1c POS/SDH ISE intermediate reach

(21)

 Yes

 Yes

 Yes

1-Port OC-12 POS

LC-1OC12/POS-SM13

 0

1-port OC-12c/STM-4c POS/SDH single mode

(10)

 Yes

 Yes

 Yes

LC-1OC12/POS-MM14

 0

1-port OC-12c/STM-4c POS/SDH multimode

(10)

 Yes

 Yes

 Yes

4-Port7 OC-12 POS6

4OC12/POS-IR-SC-B

 2

4-port OC-12c/STM-4c POS/SDH single mode

(8)

 Yes

 Yes

 Yes

4OC12/POS-MM-SC-B

 2

4-port OC-12c/STM-4c POS/SDH multimode

(8)

 Yes

 Yes

 Yes

4-Port7 OC-12 POS ISE

4OC12X/POS-I-SC-B

 3

4-port OC-12c/STM-4c POS/SDH ISE single mode

(21)

 Yes

 Yes

 Yes

4OC12X/POS-M-SC-B

 3

4-port OC-12c/STM-4c POS/SDH ISE multimode

(21)

 Yes

 Yes

 Yes

Channelized Edge Line Cards—Optical Carrier (OC) and T3

2-Port CHOC-3, DS1/E1

2CHOC3/STM1-IR-SC

 0

2-port channelized OC-3/STM-1 (DS1/E1)

(17)

 Yes

 Yes

 Yes

1-Port CHOC-12, DS3

LC-OC12-DS3

 0

1-port channelized OC-12 (DS3)

(5)

 Yes

 Yes

 Yes

1-Port CHOC-12, OC-3

CHOC12/STS3-IR-SC

 0

1-port channelized OC-12/STM-4 (OC-3/STM-1)

(5)

 Yes

 Yes

 Yes

1-Port CHOC-12,
OC-3 ISE11

CHOC12/DS1-IR-SC

 3

1-port channelized OC-12/STM-4 (DS1/E1) ISE

(27)

 Yes

 Yes

 Yes

4-Port7 CHOC-12 ISE

4CHOC12/DS3-I-SCB

 3

4-port channelized OC-12/STM-4 (DS3/E3, OC-3c/STM-1c) POS/SDH ISE

(21)

 Yes

 Yes

 Yes

1-Port CHOC-48 ISE

CHOC48/DS3-SR-SC

 3

1-port channelized OC-48/STM-16 (DS3/E3, OC-3c/STM-1c, OC-12c/STM-4c) POS/SDH ISE

(21)

 Yes

 Yes

 Yes

6-Port Ch T3

6CT3-SMB

 0

6-port channelized T3 (T1)

(14)

 Yes

 Yes

 Yes

ATM Line Cards

4-Port7 OC-3 ATM

4OC3/ATM-IR-SC

 0

4-port OC-3c/STM-1c ATM
single mode

(5)15

 Yes

 Yes

 Yes

4OC3/ATM-MM-SC

 0

4-port OC-3c/STM-1c ATM multimode

(5)15

 Yes

 Yes

 Yes

4-Port OC-3 ATM ISE11

4OC3X/ATM-IR-SC

 3

4-port OC-3/STM-1 ATM ISE single mode

(27)

 Yes

 Yes

 Yes

4OC3X/ATM-MM-SC

 3

4-port OC-3/STM-1 ATM ISE multimode

(27)

 Yes

 Yes

 Yes

8-Port OC-3 ATM

8OC03/ATM/TS-IR-B

 2

8-port OC-3c/STM-1c ATM
single mode

(22)

 Yes

 Yes

 Yes

8OC03/ATM/TS-MM-B

 2

8-port OC-3c/STM-1c ATM multimode

(22)

 Yes

 Yes

 Yes

1-Port OC-12 ATM

LC-1OC12/ATM-SM

 0

1-port OC-12c/STM-4c ATM single mode

(5)15

 Yes

 Yes

 Yes

LC-1OC12/ATM-MM

 0

1-port OC-12c/STM-4c ATM multimode

(5)15

 Yes

 Yes

 Yes

4-Port7 OC-12 ATM

4OC12/ATM-IR-SC

 2

4-port OC-12c/STM-4c ATM single mode

(13)

 Yes

 Yes

 Yes

4OC12/ATM-MM-SC

 2

4-port OC-12c/STM-4c ATM multimode

(13)

 Yes

 Yes

 Yes

4-Port7 OC-12 ATM ISE

4OC12X/ATM-IR-SC

 3

4-Port OC-12c/STM-4c ATM ISE single mode

(25)

 Yes

 Yes

 Yes

4OC12X/ATM-MM-SC

 3

4-Port OC-12c/STM-4c ATM ISE multimode

(25)

 Yes

 Yes

 Yes

Fast Ethernet (FE) and Gigabit Ethernet (GE) Line Cards

1-Port GE

GE-GBIC-SC-B

 1

1-port Gigabit Ethernet with ECC

(5)

 Yes

 Yes

 Yes

10-Port GE

10x1GE-SFP-LC-B

 4

10-port Gigabit Ethernet

(19)

 Yes

 Yes

 Yes

8-Port FE12

8FE-FX-SC-B

 1

8-port Fast Ethernet, 100BASE-FX, with ECC memory

(10)

 Yes

 Yes

 Yes

8FE-TX-RJ45-B

 1

8-port Fast Ethernet, 100BASE-TX, with ECC memory

(10)

 Yes

 Yes

 Yes

3-Port GE

3GE-GBIC-SC

 2

3-port Gigabit Ethernet

(11)

 Yes

 Yes

 Yes

4-Port7 GE ISE

4GE-SFP-LC

 3

4-port Gigabit Ethernet ISE

(25)

 Yes

 Yes

 Yes

1-Port 10-GbE

1X10GE-LR-SC

 4+

1-port 10-Gigabit Ethernet
long reach

(23)

 No

 Yes

 Yes

1X10GE-ER-SC

 4+

1-port 10-Gigabit Ethernet extended reach

(23)

 No

 Yes

 Yes

Modular GbE

EPA-GE/FE-BBRD and
EPA-3GE-SX/LH-LC

 4+

Modular Gigabit Ethernet:
Gigabit Ethernet modular baseboard and 3-port Gigabit Ethernet port adapter

(23)

 No

 Yes

 Yes

Dynamic Packet Transport (DPT) Line Cards

2-Port OC-12 DPT12

OC12/SRP-IR-SC-B

 1

2-port OC-12c/STM-4c DPT with ECC single mode
intermediate reach

(10)

 Yes

 Yes

 Yes

OC12/SRP-LR-SC-B

 1

2-port OC-12c/STM-4c DPT with ECC single mode long reach

(10)

 Yes

 Yes

 Yes

OC12/SRP-XR-SC

 1

2-port OC-12c/STM-4c DPT with ECC single mode extra long reach

(10)

 Yes

 Yes

 Yes

OC12/SRP-MM-SC-B

 1

2-port OC-12c/STM-4c DPT with ECC multimode

(10)

 Yes

 Yes

 Yes

4-Port7 OC-12 DPT ISE

4OC12X/SRP-IR-LC

 3

4-port OC-12c/STM-4c DPT ISE intermediate reach

(24)

 Yes

 Yes

 Yes

4OC12X/SRP-XR-LC

 3

4-port OC-12c/STM-4c DPT ISE extended long reach

(24)

 Yes

 Yes

 Yes

1-Port OC-48 DPT6

OC48/SRP-SR-SC-B16

 2

1-port OC-48c/STM-16c DPT single mode short reach

(15)

 Yes

 Yes

 Yes

OC48/SRP-LR-SC-B17

 2

1-port OC-48c/STM-16c DPT single mode long reach

(15)

 Yes

 Yes

 Yes

4-Port7 OC-48 DPT

4OC48/SRP-SFP

 4+

4-port OC-48c/STM-16c DPT

(23)

 No

 Yes

 Yes

1-Port OC-192 DPT

OC192/SRP-VSR

 4+

1-port OC-192c/STM-64c DPT very short reach

(23)

 No

 Yes

 Yes

OC192/SRP-SR-SC

 4+

1-port OC-192c/STM-64c DPT short reach

(23)

 No

 Yes

 Yes

OC192/SRP-IR-SC

 4+

1-port OC-192c/STM-64c DPT intermediate reach

(23)

 No

 Yes

 Yes

Shared Port Adapters (SPAs)

2-Port T3/E3 Serial

SPA-2XT3/E3

 3

2-port clear channel T3/E3

(31)

 Yes

 Yes

 Yes

4-Port T3/E3 Serial

SPA-4XT3/E3

 3

4-port clear channel T3/E3

(31)

 Yes

 Yes

 Yes

2-Port CT3

SPA-2XCT3/DS0

 3

2-port channelized T3 to DS0

(31)

 Yes

 Yes

 Yes

4-Port CT3

SPA-4XCT3/DS0

 3

4-port channelized T3 to DS0

(31)

 Yes

 Yes

 Yes

1-Port CHOC-3

SPA-1XCHSTM1/OC3

 5

1-port channelized STM-1/OC-3

(32)

 No

 Yes

 Yes

8-Port Ch T1/E1

SPA-8XCHT1/E1

 5

8-port channelized T1/E1

(32)

 No

 Yes

 Yes

8-Port FE

SPA-8XFE

 5

8-port Fast Ethernet

(32)

 No

 Yes

 Yes

1-Port 10GE

SPA-1XTENGE-XFP

 5

1-port 10-Gigabit Ethernet

(31)

 No

 Yes

 Yes

2-Port GE

SPA-2X1GE

 5

2-port Gigabit Ethernet SPA

(32)

 No

 Yes

 Yes

5-Port GE

SPA-5X1GE

 5

5-port Gigabit Ethernet

(31)

 No

 Yes

 Yes

10-Port GE

SPA-10X1GE

 5

10-port Gigabit Ethernet

(31)

 No

 Yes

 Yes

2-Port OC-48 POS

SPA-2XOC48c

 5

2-port OC-48 POS/RPR

(31)S2

 No

 Yes

 Yes

1-Port OC-192 POS/RPR VSR

SPA-OC192POS-VSR

 5

1-port OC192/STM64 POS/RPR VSR Optics

(32)

 No

 Yes

 Yes

1-Port OC-192 POS/RPR

SPA-OC192POS-LR

 5

1-port OC192/STM64 POS/RPR SMLR Optics

(31)

 No

 Yes

 Yes

1-Port OC192 POS/RPR XFP

SPA-OC192POS-XFP

 5

1-port OC192/STM64 POS/RPR XFP Optics

(31)

 No

 Yes

 Yes

SPA Interface Processors (SIPs)

SIP-400

12000-SIP-400

 3

2.5G ISE SPA Interface Processor.

(31)

 Yes

 Yes

 Yes

SIP-600

12000-SIP-600

 5

10G Engine 5 SPA Interface Processor.

(31)

 No

 Yes

 Yes

SIP-401

12000-SIP-401

 5

2.5G Multiservice Engine SPA Interface Processor.

(32)

 Yes

 Yes

 Yes

SIP-501

12000-SIP-501

 5

5G Multiservice Engine SPA Interface Processor.

(32)

 No

 Yes

 Yes

SIP-601

12000-SIP-601

 5

10G Multiservice Engine SPA Interface Processor.

(32)

 No

 Yes

 Yes

1 For a spare product number, append an equal sign (=) to the product number. For End-of-Sale (EOS) and End-of-Life (EOL) information about line cards, refer to the Cisco product bulletins at the following location:

http://www.cisco.com/en/US/partner/products/hw/routers/ps167/prod_eol_notices_list.html

2 Engine 3 (E3) is commonly referred to as IP Services Engine (ISE); Engine 4 plus (E4+) is commonly referred to as Enhanced Services (ES) engine.

3 Cisco 12006, Cisco 12008, Cisco 12010, Cisco 12012, and Cisco 12016 routers. SIPs and SPAs are only supported on the current chassis models. None of the SIP cards and SPAs are supported in either the Cisco 12008 or the Cisco 12012 routers.

4 Cisco 12404, Cisco 12406, Cisco 12410, and Cisco 12416.

5 Cisco 12810, and Cisco 12816.

6 This revision B version replaces the initial version.

7 A 4-port line card is also referred to as a "Quad" line card.

8 This Engine 4+ version replaces the initial Engine 4 version.

9 The part number may also be referred to as 4OC-48E/POS-SR-SC.

10 The part number may also be referred to as 4OC-48E/POS-LR-SC.

11 This line card was actually released in Cisco IOS Release 12.0(27)S1.

12 This version with ECC memory replaces the initial version without ECC memory.

13 The part number may also be referred to as LC-1OC12-POS-SM.

14 The part number may also be referred to as LC-1OC12-POS-MM.

15 Cisco IOS Release 12.0(10)S is recommended.

16 The part number may also be referred to as OC-48/SRP-SR-SC-B.

17 The part number may also be referred to as OC-48/SRP-LR-SC-B.


Determining Your Software Release

To determine the version of Cisco IOS software running on your Cisco router, log in to the router and enter the show version EXEC command:

Cisco Internetwork Operating System Software 
IOS (tm) 7200 Software (C7200-P-M), Version 12.0(32)S, RELEASE SOFTWARE

Upgrading to a New Software Release

For information about selecting a new Cisco IOS software release, please see How to Choose a Cisco IOS Software Release at:

http://www.cisco.com/warp/public/130/choosing_ios.shtml

For information about upgrading to a new software release, see the appropriate platform-specific document:

Cisco 7200 Series, 7300 Series, 7400 Series, and 7500 Series Routers

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094c07.shtml

Cisco 10000 Series Routers

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094c07.shtml

Cisco 10700 Series Routers

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094c07.shtml

Cisco 12000 Series Routers

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094c07.shtml

For Cisco IOS upgrade ordering instructions, see the document at the following location:

http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/957_pp.htm

To choose a new Cisco IOS software release by comparing feature support or memory requirements, use Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS and Catalyst OS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). Under the release section, you can compare Cisco IOS software releases side by side to display both the features unique to each software release and the features that the releases have in common.

Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/fn

To choose a new Cisco IOS software release based on information about defects that affect that software, use Bug Toolkit at the following URL:

http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl

Upgrading Software on Redundant PREs

When you upgrade software on redundant Cisco 10000 series Performance Routing Engines (PREs), the active PRE must be in the correct slot, and software must be downloaded to both the active PRE and the standby PRE before you reload both PREs. For more information, see the "Upgrading Software on Redundant PREs" section in the "System Startup and Basic Configuration Tasks" of the Cisco 10000 Series ESR Software Configuration Guide at the following location:

http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/10ksw/startos.htm

Microcode Software

This section consists of the following subsections:

Microcode Software for the Cisco 7500/RSP Series

Shared Port Adapter FPD Image Packages for the Cisco 12000 Series

Microcode Software for the Cisco 7500/RSP Series

Table 5 lists the current microcode versions for the Cisco 7500/RSP series. This series includes the Cisco 7000 equipped with the RSP7000 processor, the Cisco 7010 equipped with the RSP7000 processor, and the Cisco 7500 series routers. Note that microcode software images are bundled with the system software image, with the exception of the Channel Interface Processor (CIP) microcode (all system software images) and Versatile Interface Processor (VIP) microcode (certain system software images). Bundling eliminates the need to store separate microcode images. When the router starts, the system software unpacks the microcode software bundle and loads the proper software on all the interface processor boards. VIP and VIP2 microcode is bundled into all Cisco 7500 series feature sets listed in Table 5.

For further information about the CIP microcode, see the Cisco document Channel Interface Processor Microcode Release Note and Microcode Upgrade Instructions.


Note The Cisco 7000 series previously included the Cisco 7000 and 7010 routers. These products are not supported in Cisco IOS Release 12.0 S. The Cisco 7000 series now includes the Cisco 7000 equipped with the RSP7000 processor and the Cisco 7010 equipped with the RSP7000 processor.


Table 5 Cisco 7500/RSP Series Routers Microcode Versions 

Processor or Module
Current Microcode Version
Minimum Version Required

AIP (ATM Interface Processor)

20.18

20.13

CIP/CIP2 (Channel Interface Processor)

26.19

26.2

EIP (Ethernet Interface Processor)

20.6

20.3

FEIP (Fast Ethernet Interface Processor)

20.8

20.7

FIP (FDDI Interface Processor)

20.4

20.4

FSIP (Fast Serial Interface Processor)

20.9

20.9

HIP (HSSI Interface Processor)

20.2

20.2

MIP (MultiChannel Interface Processor)

22.3

22.3

TRIP (Token Ring Interface Processor)

20.2

20.2

VIP2/VIP2C (Versatile Interface Processor)

22.20

22.20


Shared Port Adapter FPD Image Packages for the Cisco 12000 Series

Field-Programmable Device (FPD) image packages are used to update Shared Port Adapter (SPA) FPD images. If a discrepancy exists between an SPA FPD image and the Cisco IOS image that is running on the router, the SPA will be deactivated until this discrepancy is resolved. For additional information on FPDs, including the upgrade process, see the "Upgrading Field-Programmable Devices" section of the Cisco 12000 Series Router SIP and SPA Software Configuration Guide.


Note The maximum time to upgrade the FPD image(s) on one SPA is 2 minutes. The total FPD upgrade time depends on the number of SPAs.


Shared Port Adapter FPD Image Package for Cisco IOS Release 12.0(32)S

The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.0(32)S is the c12k-fpd-pkg.120-32.S.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image in the Software Center on Cisco.com and contains the components that are listed in Table 6.

Table 6 Cisco 12000 Series FPD Image Package Contents for Release 12.0(32)S  

Supported SPAs
FPD
ID
FPD Component Name
FPD Component Version
Minimum Required Hardware Version

2-Port T3/E3 Serial SPA

1

T3E3 SPA ROMMON

2.12

0.0

2

T3E3 SPA I/O FPGA

0.24

0.0

3

T3E3 SPA E3 FPGA

1.0

0.0

4

T3E3 SPA T3 FPGA

1.0

0.0

4-Port T3/E3 Serial SPA

1

T3E3 SPA ROMMON

2.12

0.0

2

T3E3 SPA I/O FPGA

0.24

0.0

3

T3E3 SPA E3 FPGA

1.0

0.0

4

T3E3 SPA T3 FPGA

1.0

0.0

2-Port Channelized T3 SPA

1

CT3 SPA ROMMON

2.12

0.100

2

CT3 SPA I/O FPGA

2.2

0.100

3

CT3 SPA T3 FPGA R1

0.11

0.100

3

CT3 SPA T3 FPGA R2

0.15

0.200

4-Port Channelized T3 SPA

1

CT3 SPA ROMMON

2.12

0.100

2

CT3 SPA I/O FPGA

2.2

0.100

3

CT3 SPA T3 FPGA R1

0.11

0.100

3

CT3 SPA T3 FPGA R2

0.15

0.200

1-Port Channelized STM-1/OC-3 SPA

1

STM1/OC3 SPA ROMMON

2.12

0.0

2

STM1/OC3 SPA I/O FPGA

1.2

0.0

3

STM1/OC3 SPA ET3 FPGA

1.1

0.0

8-Port Channelized T1/E1 SPA

1

CTE1 SPA ROMMON

2.12

0.14

1

CTE1 SPA ROMMON NP

2.12

0.0

2

CTE1 SPA I/O FPGA

2.1

0.0

8-Port FE SPA

1

FE SPA FPGA

1.0

0.0

1-Port 10GE SPA

1

10GE SPA FPGA

1.7

0.0

2-Port GE SPA

1

GE SPA FPGA

1.8

0.0

5-Port GE SPA

1

GE SPA FPGA

1.8

0.0

10-Port GE SPA

1

GE SPA FPGA

1.8

0.0

2-Port OC-48 POS/SRP HH SPA

1

Multi-Port OC48 POS/RPR SPA FPD

1.0

0.0

1-Port OC-192 POS/SRP FH SPA

1

1-Port POS/RPR SPA IOFPGA P1

1.2

0.0

1

1-Port POS/RPR SPA IOFPGA P3

1.3

5.0

1-Port OC-192 POS/SRP HH SPA

1

1-Port POS/RPR SPA IOFPGA P1

1.2

0.0

1

1-Port POS/RPR SPA IOFPGA P2

1.2

2.0


Shared Port Adapter FPD Image Package for Cisco IOS Release 12.0(31)S

The FPD image package that is used to upgrade SPAs on a router that runs Cisco IOS Release 12.0(31)S is the c12k-fpd-pkg.120-31.S.pkg file. This SPA FPD image package file is accessible from the page where you downloaded your specific Cisco IOS image in the Software Center on Cisco.com and contains the components that are listed in Table 7.

Table 7 Cisco 12000 Series FPD Image Package Contents for Release 12.0(31)S  

Supported SPAs
FPD
ID
FPD Component Name
FPD Component Version
Minimum Required Hardware Version

2-Port T3/E3 Serial SPA

1

T3E3 SPA ROMMON

2.12

0.0

2

T3E3 SPA I/O FPGA

0.24

0.0

3

T3E3 SPA E3 FPGA

0.6

0.0

4

T3E3 SPA T3 FPGA

0.14

0.0

4-Port T3/E3 Serial SPA

1

T3E3 SPA ROMMON

2.12

0.0

2

T3E3 SPA I/O FPGA

0.24

0.0

3

T3E3 SPA E3 FPGA

0.6

0.0

4

T3E3 SPA T3 FPGA

0.14

0.0

2-Port Channelized T3 SPA

1

CT3 SPA ROMMON

2.12

0.100

2

CT3 SPA I/O FPGA

1.4

0.100

3

CT3 SPA T3 FPGA R1

0.11

0.100

3

CT3 SPA T3 FPGA R2

0.15

0.200

4-Port Channelized T3 SPA

1

CT3 SPA ROMMON

2.12

0.100

2

CT3 SPA I/O FPGA

1.4

0.100

3

CT3 SPA T3 FPGA R1

0.11

0.100

3

CT3 SPA T3 FPGA R2

0.15

0.200

1-Port OC-192 POS/SRP FH SPA

1

1-Port POS/RPR SPA IOFPGA

1.2

0.0

1-Port OC-192 POS/SRP HH SPA

1

1-Port POS/RPR SPA IOFPGA

1.2

0.0

1

1-Port POS/RPR SPA IOFPGA

1.2

2.0

5-Port GE SPA

1

GE SPA FPGA

1.6

0.0

10-Port GE SPA

1

GE SPA FPGA

1.6

0.0

1-Port 10GE SPA

1

10GE SPA FPGA

1.6

0.0


Feature Support

Cisco IOS software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS software images are included in a release. Each feature set contains specific Cisco IOS features.


Caution Cisco IOS images with strong encryption (including, but not limited to 168-bit [3DES] data encryption feature sets) are subject to U.S. government export controls and have limited distribution. Strong encryption images to be installed outside the United States are likely to require an export license. Customer orders may be denied or subject to delay because of U.S. government regulations. When applicable, the purchaser/user must obtain local import and use authorizations for all encryption strengths. Please contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com.

Feature-to-image mapping is available through Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). You can compare Cisco IOS software releases side-by-side to display both the features unique to each software release and the features that the releases have in common.

Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:

www.cisco.com/go/cfn

For help with Cisco Feature Navigator, see the help information at the following URL:

http://www.cisco.com/web/applicat/CFNTOOLS/Help_Docs/help/cfn_support.html

Determining the Software Images (Feature Sets) That Support a Specific Feature

To determine which software images (feature sets) in a Cisco IOS release support a specific feature, go to the Cisco Feature Navigator home page and perform the following steps.


Step 1 From the Cisco Feature Navigator home page, click Research Features.

Step 2 Select your software type or leave the field as "All".

Step 3 To find a feature, you can search by either Feature or Technology (select the appropriate button). If you select Search by Feature, you can further filter your search by using the Filter By text box.

Step 4 Choose a feature from the Available Features text box, and click the Add button to add the feature to the Selected Features text box.


Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.


Repeat this step to add features. A maximum of 20 features can be chosen for a single search.

Step 5 Click Continue when you are finished choosing features.

Step 6 In the Release/Platform Tree area, select either your release (from the Train-Release list) or your platform (from the Platform list).

Step 7 The "Search Result" table will list all the software images (feature sets) that support the features that you chose.


Note You can download your results into an Excel spreadsheet by clicking on the Download Excel button.



Determining the Features Supported in a Specific Software Image (Feature Set)

To determine which features are supported in a specific software image (feature set), go to the Cisco Feature Navigator home page and perform the following steps.


Step 1 From the Cisco Feature Navigator home page, click Research Software.

Step 2 Select your software type from the drop-down list and chose the Release button in the "Search By" area.

Step 3 From the Major Release drop-down list, chose the appropriate major release.

Step 4 From the Release drop-down list, choose the appropriate maintenance release.

Step 5 From the Platform drop-down list, choose the appropriate hardware platform.

Step 6 From the Feature Set drop-down list, choose the appropriate feature set. The Image Details area will provide details on the specific image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.


Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.



Memory Recommendations

To determine memory recommendations for software images (feature sets) in your Cisco IOS release, go to the Cisco Feature Navigator home page and perform the following steps.


Step 1 From the Cisco Feature Navigator home page, click Research Software.

Step 2 Select your software type from the drop-down list and choose the Release button in the "Search By" area.

Step 3 From the Major Release drop-down list, choose the appropriate major release.

Step 4 From the Release drop-down list, choose the appropriate maintenance release.

Step 5 From the Platform drop-down list, choose the appropriate hardware platform.

Step 6 From the Feature Set drop-down list, choose the appropriate feature set.

Step 7 The Image Details area will provide details on the specific image including the DRAM and flash memory recommendations for each image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.



Note The Lawful Interface functionality is only available in the following software images:
- Service Provider Secure Shell 3DES (k4p-mz)
- Service Provider Secure Shell 56 (k3p-mz)