The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To enable debugs in the installer, use the debug installer command in Privileged EXEC mode. To disable debugging use the no form of the command.
all | Enables all installer debugs |
process | Enables all the debugs inside Installer process |
issu | Enables all the debugs inside the installer's provisioning scripts |
common | Enables all the debugs inside the installer common modules |
No debugs enabled
Privileged EXEC
Release | Modification |
---|---|
IOS XE 3.2.0 SE | Command introduced. |
Privileged EXEC
The debug output for the above commands is displayed to the console and/or the IOS logging buffer.
Note |
debug installer all should typically be enabled when troubleshooting installation related problems |
To enable all installer debugs, perform the following:
infra-p2-3#debug installer all All installer debugging is on
Command | Description |
---|---|
debug iosd issu | Use this command to enable all the debugs inside the IOS issu_iosd and iosvrp_issu_upgrade subsystems |
To enable all the debugs inside the IOS issu_iosd and iosvrp_issu_upgrade subsystems, use the debug iosd issu command in Privileged EXEC mode. To disable debugging use the no form of the command.
Debugs not enabled.
Privileged EXEC
Release | Modification |
---|---|
IOS XE 3.2.0 SE | Command introduced. |
Privileged EXEC
No command variables
Note |
debug iosd issu should typically be enabled when troubleshooting installation related problems |
Command | Description |
---|---|
debug installer all | Use this command to enable debugs in the installer. |