Contents
The Flexible NetFlow Eggress support feature supports the monitoring of traffic that a router is transmitting on an interface or subinterface.
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
The Flexible NetFlow Egress support feature supports the monitoring of traffic that a device is transmitting on an interface or subinterface.
The feature is enabled by applying a flow monitor in output (egress) mode on the transmitting device.
If you configure a Flexible NetFlow exporter for the flow monitors you use for the Flexible NetFlow--Egress support feature, the transmitting device will export the captured flows to the configured collector devices in the provider network.
Description |
Link |
---|---|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1 | Feature Information for Flexible NetFlow--Egress support |
Feature Name |
Releases |
Feature Information |
---|---|---|
Flexible NetFlow--Egress support |
Cisco IOS XE Release 3.1S Cisco IOS XE Release 3.2SE |
The Flexible NetFlow Egress support feature supports the monitoring of traffic that a router is transmitting on an interface or subinterface. No commands were introduced or modified by this feature. |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.