The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To load a preconfigured Embedded Menu Manager (EMM) Menu Definition File (MDF) and launch it, use the emm command in user EXEC or privileged EXEC mode. To launch a loaded preconfigured EMM menu, use the emm command in user EXEC or privileged EXEC mode.
emm mdf mdf-url [ record replay-file-url ]
emm preconfigured-menu-name [ record replay-file-url ]
mdf mdf-url |
The name and location of the specified MDF to be loaded. |
preconfigured-menu- name |
The preconfigured menu name of the EMM menu to be launched. |
record |
(Optional) Invokes the recording of all actions associated with the MDF. |
replay-file-url |
(Optional) The name and location of the file that records all actions associated with the MDF. |
User EXEC (#)
Privileged EXEC (#)
Release |
Modification |
---|---|
12.4(20)T |
This command was introduced. |
The following example shows how to load a preconfigured MDF and launch it:
Router# emm mdf disk0:bgp.mdf ================================================================================ BGP Diagnostics Enter ? for help or ?# for item help -------------------------------------------------------------------------------- 1. Install Diagnostic Scripts 2. Set Global Variables (email parameters) 3. Deploy BGP Neighbor Loss Diagnostic Script 4. Deploy BGP Neighbor Formation Problem Diagnostic Script 5. Deploy BGP Route Problem Diagnostic Script 6. Display Diagnostic Policy Configuration 7. Remove Diagnostic Policies 8. Exit Enter selection [8]:8 Router# The following example shows how to launch a loaded preconfigured EMM menu: Router# emm BGP ================================================================================ BGP Diagnostics Enter ? for help or ?# for item help -------------------------------------------------------------------------------- 1. Install Diagnostic Scripts 2. Set Global Variables (email parameters) 3. Deploy BGP Neighbor Loss Diagnostic Script 4. Deploy BGP Neighbor Formation Problem Diagnostic Script 5. Deploy BGP Route Problem Diagnostic Script 6. Display Diagnostic Policy Configuration 7. Remove Diagnostic Policies 8. Exit Enter selection [8]:8 Router#
Command |
Description |
---|---|
debug emm |
Debugs MDFs. |
emm clear |
Changes the terminal clear-screen escape sequence. |
show mdf |
Displays loaded preconfigured MDFs. |
To change the terminal clear-screen escape sequence for a terminal/terminal emulator that is not a DEC vt100 terminal/terminal emulator, use the emm clear command in privileged EXEC mode.
emm clear escape-sequence
escape-sequence |
The escape sequence is entered as an even number of character representations of ASCII hexadecimal data. The value 1B5B324A1B5B303B30480D should be entered. |
Privileged EXEC (#)
Release |
Modification |
---|---|
12.4(20)T |
This command was introduced. |
The following example shows how the terminal clear-screen escape sequence is changed for a terminal/terminal emulator that is not a DEC vt100 terminal/terminal emulator:
Router(config)# emm clear 1B5B324A1B5B303B30480D
Command |
Description |
---|---|
debug emm |
Debugs MDFs. |
emm |
Loads and launches preconfigured MDFs or launches loaded preconfigured EMM menus. |
show mdf |
Displays loaded preconfigured MDFs. |
To display loaded preconfigured Embedded Menu Manager (EMM) Menu Definition Files (MDFs), use the show mdf command in user EXEC or privileged EXEC mode.
show mdf
This command has no arguments or keywords.
User EXEC (#)
Privileged EXEC (#)
Release |
Modification |
---|---|
12.4(20)T |
This command was introduced. |
The following is sample output from the show mdf command when a preconfigured MDF has been loaded on the router:
Router# show mdf Menu Name / URL: BGP / disk0:bgp.mdf
The following is sample output from the show mdf command when no MDFs exist on the router:
Router# show mdf No menus configured!
Command |
Description |
---|---|
debug emm |
Debugs MDFs. |
emm |
Loads and launches preconfigured MDFs or launches loaded preconfigured EMM menus. |
emm clear |
Changes the terminal clear-screen escape sequence. |