Application Visibility and Control Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
Aliases
Downloads: This chapterpdf (PDF - 274.0KB) | Feedback

Aliases

Table Of Contents

Aliases

Finding Feature Information

Contents

Information About Aliases

How to Use Aliases

Using Aliases

Configuration Examples for Using Aliases

Example: Configuring Collect Connection Metrics for all Client Fields

Example: Configuring Collect Connection Metrics for all Delay Fields

Example: Configuring Collect Connection Metrics for all Fields for Delay Histogram

Example: Configuring Collect Connection Metrics for all Server Fields

Example: Configuring Collect Connection Metrics for all Transaction Fields

Additional References

Related Documents

Technical Assistance

Feature Information for Aliases


Aliases


First Published: July 30, 2013

The Aliases chapter describes how to configure field aliases for Application Visibility and Control (AVC).

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for Aliases" section.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

Information About Aliases

How to Use Aliases

Configuration Examples for Using Aliases

Additional References

Feature Information for Aliases

Information About Aliases

The field aliases simplify the configuration of connection information fields for a flow record.

How to Use Aliases

Using Aliases

Using Aliases

You can perform the following steps in any sequence.

SUMMARY STEPS

1. enable

2. configure terminal

3. flow record type performance-monitor performance-monitor-name

4. collect connection client all

5. collect connection delay all

6. collect connection delay response to-server histogram all

7. collect connection server all

8. collect connection transaction all

9. exit

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enable

Example:

Device> enable

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2 

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3 

flow record type performance-monitor performance-monitor-name

Example:

Device(config)# flow record type performance-monitor perf_mon

Enters flexible netflow record configuration mode.

Step 4 

collect connection client all

Example:

Device(config-flow-record)# collect connection client all

Configures collect connection metrics for all client fields.

Step 5 

collect connection delay all

Example:

Device(config-flow-record)# collect connection delay all

Configures collect connection metrics for all delay fields.

Step 6 

collect connection delay response to-server histogram all

Example:

Device(config-flow-record)# collect connection delay response to-server histogram all

Configures collect connection delay response to server histogram metrics for all delay fields.

Step 7 

collect connection server all

Example:

Device(config-flow-record)# collect connection server all

Configures collect connection metrics for all server fields.

Step 8 

collect connection transaction all

Example:

Device(config-flow-record)# collect connection transaction all

Configures collect connection metrics for all transaction fields.

Step 9 

exit

Example:

Device(config-flow-record)# exit

Exits flexible netflow flow record configuration mode and enters global configuration mode.

Configuration Examples for Using Aliases

Example: Configuring Collect Connection Metrics for all Client Fields

Example: Configuring Collect Connection Metrics for all Delay Fields

Example: Configuring Collect Connection Metrics for all Fields for Delay Histogram

Example: Configuring Collect Connection Metrics for all Server Fields

Example: Configuring Collect Connection Metrics for all Transaction Fields

Example: Configuring Collect Connection Metrics for all Client Fields

The following example shows how to configure collect connection metrics for all client (flow initiator) fields such as counter, ipv4, ipv6, and transport:

Device(config)#  flow record type performance-monitor perf_mon
Device(config-flow-record)# collect connection client all
Device(config-flow-record)# exit

Example: Configuring Collect Connection Metrics for all Delay Fields

The following example shows how to configure collect connection metrics for all delay fields such as application, network, and response:

Device(config)# flow record type performance-monitor perf_mon
Device(config-flow-record)# collect connection client all
Device(config-flow-record)# exit

Example: Configuring Collect Connection Metrics for all Fields for Delay Histogram

The following example shows how to configure all collect connect metrics for delay histogram fields:

Device(config)# flow record type performance-monitor perf_mon
Device(config-flow-record)# collect connection delay response to-server histogram all
Device(config-flow-record)# exit

Example: Configuring Collect Connection Metrics for all Server Fields

The following example shows how to configure collect connection metrics for all server fields such as such as counter, ipv4, ipv6, and transport:

Device(config)# flow record type performance-monitor perf_mon
Device(config-flow-record)# collect connection server all
Device(config-flow-record)# exit

Example: Configuring Collect Connection Metrics for all Transaction Fields

The following example shows how to configure collect connection metrics for transaction counter and transaction duration:

Device(config)# flow record type performance-monitor perf_mon
Device(config-flow-record)# collect connection transaction all
Device(config-flow-record)# exit

Additional References

Related Documents

Related Topic
Document Title

Cisco IOS commands

Cisco IOS Master Commands List, All Releases

NetFlow commands

Cisco IOS Netflow Command Reference


Technical Assistance

Description
Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html


Feature Information for Aliases

Table 1 lists the release history for this feature.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.


Note Table 1 lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


Table 1 Feature Information for Aliases 

Feature Name
Releases
Feature Information

Aliases

Cisco IOS XE Release 3.10S

This feature was introduced.