Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
About this Guide
Downloads: This chapterpdf (PDF - 237.0KB) The complete bookPDF (PDF - 4.45MB) | Feedback

Table of Contents

Preface

Objectives

Document Revision History

Organization

Related Documentation

Document Conventions

Obtaining Documentation and Submitting a Service Request

Preface

This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:

Objectives

This document describes the configuration and troubleshooting of SPA interface processors (SIPs) and shared port adapters (SPAs) that are supported on the Cisco ASR 1000 Series Routers.

Document Revision History

The Document Revision History records technical changes to this document. The table shows the Cisco IOS XE software release number and document revision number for the change, the date of the change, and a brief summary of the change.

 

Release No.
Revision No.
Date
Change Summary

Cisco IOS XE Release 3.12.0S

OL-14127-18

March 21, 2014

The following PB-free SPAs were supported on the Cisco ASR 1000 Series Routers:

  • SPA-2XT3/E3-V2, SPA-4XT3/E3-V2
  • SPA-1CHSTM1/OC3V2
  • SPA-2XCT3/DS0-V2, SPA-4XCT3/DS0-V2

The following serial SPAs were supported on the SIP40 linecard:

  • Channelized TE1 SPA
  • Channelized T3 SPA
  • Channelized OC3 STM SPA
  • Clear Channel T3E3 SPA

All serial SPAs supported SIP10 on cascades release will be supported on SIP40.

Cisco IOS XE Release 3.11.0S

OL-14127-17

November 21, 2013

The Adjustable statistics poll interval for SPA-8XCHT1/E1 feature was supported on the Cisco ASR 1000 Series Routers:

The following SPAs were supported on the Cisco ASR 1000 Series Routers:

  • 8XCHT1/E1-V2

Note SPA-8XCHT1/E1-V2 is supported from Cisco IOS XE Release 3.10.1S.

Cisco IOS XE Release 3.10.0S

OL-14127-16

July 31, 2013

Added support for the following POS SPAs to the Minimal Disruptive Restart (MDR) feature on the Cisco ASR 1000 Series Routers with SIP40s:

  • SPA-2XOC3-POS
  • SPA-4XOC3-POS
  • SPA-4XOC3-POS-V2
  • SPA-8XOC3-POS
  • SPA-1XOC12-POS
  • SPA-2XOC12-POS
  • SPA-4XOC12-POS
  • SPA-8XOC12-POS

Cisco IOS XE Release 3.9.0S

OL-14127-15

March 28, 2013

Added information pertaining to the support for the 8-Port Clear-Channel T3/E3 Serial SPA on the Cisco ASR1000-SIP10, the Cisco ASR 1001 Router, the Cisco ASR 1002 Router, and the Cisco ASR 1002-F Router.

Cisco IOS XE Release 3.8.0S

OL-14127-14

November 28, 2012

Added information pertaining to the following updates:

  • Support for the WebEx T28.4 version of the WebEx Node SPA
  • Support for the 8-Port Clear-Channel T3/E3 Serial SPA (SPA-8XT3/E3) on the Cisco ASR 1000 Series SIP
  • Added support for the following GigabitEthernet SPAs to the Minimal Disruptive Restart (MDR) feature on the Cisco ASR 1000 Series Routers with SIP40s:

SPA-2X1GE-V2

SPA-5X1GE-V2

SPA-8X1GE-V2

SPA-10X1GE-V2

SPA-1X10GE-L-V2

  • Support for the Adaptive Multi-Rate Wideband (AMR-WB) feature on the session border controller (SBC) on the Cisco ASR 1000 Series Aggregation Services Routers

Information about these new features has been added in various sections in this guide.

Cisco IOS XE Release 3.7.0S

OL-14127-13

July 2012

Added information pertaining to the following updates:

  • Introduction of the Cisco ASR 1002-X Router
  • Introduction of the Cisco ASR1000-ESP100
  • Support for Cisco ASR1000-SIP40 on all routers that support Cisco ASR1000-SIP10

Information about these new features has been added in various sections in this guide.

Cisco IOS XE Release 3.6.0S

OL-14127-12

March 29, 2012

Cisco IOS XE Release 3.5.0S

OL-14127-11

November 28, 2011

Added information pertaining to support for clear-channel E3 ATM mode on the SPA-2CHT3-CE-ATM .

Cisco IOS XE Release 3.4.0S

OL-14127-10

July 25, 2011

Addition of information pertaining to the overview and configuration for the following SPAs added on the Cisco ASR 1000 Series Aggregation Services Routers:

Cisco IOS XE Release 3.3.0S

OL-14127-09

March 30, 2011

Addition of information pertaining to the overview and configuration for the following SPAs added on the Cisco ASR 1000 Series Aggregation Services Routers:

Cisco IOS XE Release 3.2S

OL-14127-08

November 24, 2010

Addition of information pertaining to the overview and configuration for the following SPAs added on the Cisco ASR 1000 Series Aggregation Services Routers:

Cisco IOS XE Release 3.1S

OL-14127-07

July 23, 2010

Addition of information pertaining to:

  • Change in show running-config interface Fast Ethernet slot/subslot/port command output for 4-Port Fast Ethernet SPA added.
  • Information and features added to support the new SIP, Cisco ASR1000-SIP40 .
  • Applying default maximum bandwidth of SIP-10 when SIP-40 is downgraded to SIP-10 was added
  • Support of ingress classification on QinQ VLAN based on either outer or inner VLAN Id cos bits was added.

Cisco IOS XE Release 2.6

OL-14127-06

February 26, 2010

Addition of information pertaining to the support of the following SPA and other information updates:

Correction to show support for the GLC-GE-100FX optics module for the 5-Port and 10-Port Gigabit Ethernet SPA.

Correction to the auto negotiation behavior for the SFP-GE-T module .

Correction to show support for additional modules for the 2-Port, 4-Port, and 8-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA .

Cisco IOS XE Release 2.5

OL-14127-05

November 25, 2009

Addition of information pertaining to the support for the following areas:

Cisco IOS XE Release 2.4

OL-14127-04

June 30, 2009

Addition of information pertaining to the support for the following SPAs:

Cisco IOS XE Release 2.3

OL-14127-03

November 24, 2008

Addition of information pertaining to the support for the following SPA:

Cisco IOS XE Release 2.2

OL-14127-02

September 10, 2008

Addition of information pertaining to the support for the following SPAs:

Cisco IOS XE Release 2.1

OL-14127-01

April 25, 2008

First release.

Organization

This document contains the following chapters:

 

Related Documentation

This section refers you to other documentation that also might be useful as you configure your Cisco ASR 1000 Series Aggregation Services Routers.

  • Information about supported features and their configuration on the Cisco ASR 1000 Series Aggregation Services Routers are available in the Cisco IOS XE software configuration guides at:

http://www.cisco.com/en/US/products/ps9587/products_installation_and_configuration_guides_list.html

  • A summary of the new features in a particular release can be found at:

http://www.cisco.com/en/US/products/ps9587/products_feature_guides_list.html

  • Command documentation for the Cisco ASR 1000 Series Aggregation Services Routers is available at:

http://www.cisco.com/en/US/products/ps9587/prod_command_reference_list.html

  •  
  • Cisco ASR 1000 Series Routers Hardware Installation Guide
  • Three Quick Start Guides:

Cisco ASR 1002 Router Quick Start Guide

Cisco ASR 1004 Router Quick Start Guide

Cisco ASR 1006 Router Quick Start Guide

  • Command Reference Guide:

Cisco IOS Quality of Service Solutions Command Reference guide at the URL: http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_book.html

  • Regulatory Compliance and Safety Information for the Cisco ASR 1000 Series Routers
  • Cisco ASR 1000 Series Aggregation Services Routers Release Notes for Cisco ASR 1000 Series Aggregation Services Routers

http://www.cisco.com/en/US/products/ps9343/products_documentation_roadmaps_list.html

Your router and the Cisco IOS software running on it contain extensive features. You can find documentation for Cisco products at the following URL:

http://www.cisco.com/cisco/web/psa/default.html?mode=prod

Document Conventions

Within the SIP and SPA software configuration guides, the term router is generally used to refer to a variety of Cisco products (for example, routers, access servers, and switches). Routers, access servers, and other networking devices that support Cisco IOS software are shown interchangeably within examples. These products are used only for illustrative purposes; that is, an example that shows one product does not necessarily indicate that other products are not supported.

This documentation uses the following conventions:

Convention
Description

^ or Ctrl

The ^ and Ctrl symbols represent the Control key. For example, the key combination ^D or Ctrl-D means hold down the Control key while you press the D key. Keys are indicated in capital letters but are not case sensitive.

string

A string is a nonquoted set of characters shown in italics. For example, when setting an SNMP community string to public, do not use quotation marks around the string or the string will include the quotation marks.

Command syntax descriptions use the following conventions:

 

Convention
Description

bold

Bold text indicates commands and keywords that you enter exactly as shown.

italics

Italic text indicates arguments for which you supply values.

[x]

Square brackets enclose an optional element (keyword or argument).

|

A vertical line indicates a choice within an optional or required set of keywords or arguments.

[x | y]

Square brackets enclosing keywords or arguments separated by a vertical line indicate an optional choice.

{x | y}

Braces enclosing keywords or arguments separated by a vertical line indicate a required choice.

Nested sets of square brackets or braces indicate optional or required choices within optional or required elements. For example:

 

Convention
Description

[x {y | z}]

Braces and a vertical line within square brackets indicate a required choice within an optional element.

Examples use the following conventions:

 

Convention
Description
screen

Examples of information displayed on the screen are set in Courier font.

bold screen

Examples of text that you must enter are set in Courier bold font.

< >

Angle brackets enclose text that is not printed to the screen, such as passwords.

!

An exclamation point at the beginning of a line indicates a comment line. (Exclamation points are also displayed by the Cisco IOS software for certain processes.)

[ ]

Square brackets enclose default responses to system prompts.

The following conventions are used to attract the attention of the reader:


Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.


Note Means reader take note. Notes contain helpful suggestions or references to materials that may not be contained in this manual.



Tip Means the following information will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver.


Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation , which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.