Command Reference vA5(1.0) and earlier, Cisco ACE Application Control Engine
Line Configuration Mode Commands
Downloads: This chapterpdf (PDF - 43.0KB) The complete bookPDF (PDF - 28.65MB) | Feedback

Line Configuration Mode Commands

Table Of Contents

Line Configuration Mode Commands

(config-line) session-limit


Line Configuration Mode Commands

Line configuration mode commands allow you to configure the virtual terminal line settings. To configure the virtual terminal line settings and access line configuration mode, use the line vty command in configuration mode. The CLI prompt changes to (config-line). For information about the commands in line configuration mode, see the following commands.

Use the no form of the line vty command to reset the line configuration mode parameter to its default setting.

line vty

no line vty

Syntax Description

This command has no keywords or arguments.

Command Modes

Configuration mode

Admin context only

Command History

ACE Module Release
Modification

3.0(0)A1(2)

This command was introduced.


ACE Appliance Release
Modification

A1(7)

This command was introduced.


Usage Guidelines

The commands in this mode have no user role feature restrictions. For details about role-based access control (RBAC) and user roles, see the Virtualization Guide, Cisco ACE Application Control Engine.

Examples

To enter the line configuration mode, enter:

host1/Admin(config)# line vty
host1/Admin(config-line)# 

Related Commands

clear line
show line

(config-line) session-limit

T o configure the maximum number of terminal sessions per line, use the session-limit command. Use the no form of this command to disable a setting for the configured virtual terminal line.

session-limit number

no session-limit number

Syntax Description

number

Maximum number of terminal sessions per line. Enter an integer from 1 to 251.


Command Modes

Line configuration mode

Admin context only

Command History

ACE Module Release
Modification

3.0(0)A1(2)

This command was introduced.


ACE Appliance Release
Modification

A1(7)

This command was introduced.


Usage Guidelines

This command has no usage guidelines.

Examples

For example, to configure a virtual terminal line, enter:

host1/Admin# config 
Enter configuration commands, one per line. End with CNTL/Z
host1/Admin(config)#
host1/Admin(config)# line vty
host1/Admin(config-line)# session-limit 23
 
   

To disable a setting for the configured virtual terminal line, enter:

host1/Admin(config-line)# no session-limit 23

Related Commands

clear line
show line
(config) line vty