What's New in Cisco Product Documentation - May 2008
Available Languages
Table Of Contents
What's New in Cisco Product Documentation
Application Networking Services
Server Networking and Virtualization
Universal Gateways and Access Servers
Video, Cable, and Content Delivery
Voice and Unified Communications
Obtaining Additional Information
What's New in Cisco Product Documentation
May 2008
What's New in Cisco Product Documentation lists new and revised Cisco documentation since the last release of this monthly publication. To subscribe to the What's New in Cisco Product Documentation RSS feed, paste the following URL into your RSS reader:
http://www.cisco.com/cdc_content_elements/rss/whats_new/whatsnew_rss_feed.xml
Previous releases of the What's New in Cisco Product Documentation are available at the following URL:
http://www.cisco.com/en/US/docs/general/whatsnew/archive/archive.html
The Product Documentation Store ceased offering Cisco technical documentation in printed format in July 2007.
Application Networking Services
None at this time.
Cisco Interfaces and Modules
New Documents
•
Cisco Network Capacity Expansion 1.0
Provides information on how to install, configure, and use Cisco Network Capacity Expansion 1.0, a new software application that is supported on selected Cisco integrated services router platforms.
Cisco IOS Software
New Documents
•
Provides Intelligent Service Gateway (ISG) functionality in distributed IP sessions on Cisco 7600 routers that have Session Initiation Protocol (SIP) IP-400 access-facing line cards.
Provides modular quality of service (QoS) command-line interface (CLI) provisioning on Cisco Intelligent Service Gateway (ISG) IP sessions.
•
Describes new features and significant components for the Cisco 2800 series Integrated Services Routers that support Cisco IOS Release 12.4(15)XZ.
•
Describes new features and significant components for the Cisco 3800 series Integrated Services Routers that support Cisco IOS Release 12.4(15)XZ.
Revised Documents
•
Describes new features and significant components for the Cisco AS5x00 Universal Gateways that support Cisco IOS Release 12.4(15)XY2.
•
Describes new features and significant components for the Cisco IAD2430 series Integrated Access Devices that support Cisco IOS Release 12.4(15)XY2.
•
Describes new features and significant components for the Cisco IAD2801 series Integrated Access Devices that support Cisco IOS Release 12.4(15)XY2.
•
Describes new features and significant components for the Cisco 1800 series routers that support Cisco IOS Release 12.4(15)XY2.
•
Describes new features and significant components for the Cisco 2800 series Integrated Services Routers that support Cisco IOS Release 12.4(15)XY2.
•
Describes new features and significant components for the Cisco 3800 Series Integrated Services Routers that support Cisco IOS Release 12.4(15)XY2.
Cisco NX-OS Software
New Documents
•
Provides an index to CLI commands documented in the NX-OS command references.
•
Provides CLI command syntax descriptions for configuration fundamentals in Cisco NX-OS.
•
Describes how to use the command-line interface to get your NX-OS system up and running.
•
Describes how to get started configuring virtual device contexts using Cisco NX-OS.
•
Describes high availability (HA) concepts and features for Cisco NX-OS devices.
•
Provides CLI command syntax descriptions for interface configuration in Cisco NX-OS.
•
Describes how to configure the basic, Layer 2, Layer 3, port channel, and tunnel interfaces using Cisco NX-OS.
•
Provides CLI command syntax descriptions for Layer 2 switching features in Cisco NX-OS.
•
Describes how to configure Layer 2 switching features using Cisco NX-OS.
•
Describes how to install and configure feature licenses for Cisco NX-OS.
•
Provides a brief overview of SNMP and MIB fundamentals for Cisco NX-OS.
•
Provides CLI command syntax descriptions for multicast routing features in NX-OS.
•
Describes how to configure the multicast routing protocols using the Cisco NX-OS CLI.
•
Provides CLI command syntax descriptions for quality of service features in NX-OS.
•
Describes how to configure quality of service features such as policing, queuing, and scheduling using Cisco NX-OS.
•
Describes the features, caveats, and limitations for Cisco NX-OS software.
•
Provides CLI command syntax descriptions for security features in NX-OS.
•
Describes how to configure security features using Cisco NX-OS.
•
Provides CLI command syntax descriptions for system management features in Cisco NX-OS.
•
Describes how to configure system management features such as syslog, Call Home, and Embedded Event Manager using the Cisco NX-OS CLI.
•
Provides a list of system messages, their explanations, and recommended actions for Cisco NX-OS.
•
Provides procedures and tools for troubleshooting Cisco NX-OS devices.
•
Provides CLI command syntax descriptions for unicast routing features in Cisco NX-OS.
•
Describes how to configure unicast routing protocols and first-hop redundancy protocols using the Cisco NX-OS CLI.
•
Provides CLI command syntax descriptions for virtual device contexts in Cisco NX-OS.
•
Describes how to configure virtual device contexts using Cisco NX-OS.
•
Describes how to configure NX-OS features using the XML management interface.
Interoperability Systems
None at this time.
Network Management
New Documents
•
Describes how to deploy and use Cisco DCNM.
•
Describes how to get started configuring virtual device contexts using Cisco DCNM.
•
Describes how to configure the basic, Layer 2, Layer 3, port channel, and tunnel interfaces using Cisco DCNM.
•
Describes how to configure Layer 2 switching features using Cisco DCNM.
•
Describes the features, system requirements, and caveats for Cisco DCNM.
•
Describes how to configure security features using Cisco DCNM.
•
Describes how to configure unicast routing protocols and first-hop redundancy protocols using Cisco DCNM.
•
Describes how to configure virtual device contexts using Cisco DCNM.
•
Describes how to configure Cisco NX-OS devices by using the Cisco DCNM web services API on the DCNM server.
Revised Documents
•
Describes the product documentation, how to install, and how to start to use Cisco ANA 4.0.2.
•
Describes how to install and set up Cisco ANA 4.0.2.
•
Describes the Cisco ANA 4.0.2 open caveats and the Cisco ANA 4.0.1 resolved caveats.
•
Provides copyright and license information about open source and third-party software used by Cisco ANA 4.0.2.
•
Describes how to use and administer Cisco ANA 4.0.2.
•
Describes the devices and technologies supported by Cisco ANA 4.0.2.
•
Provides additional information about the supported technologies in Cisco ANA 4.0.2.
•
Explains how to prepare your site for installation, how to install the Cisco ADE 1010 and 2120 series appliance in an equipment rack, and how to troubleshoot and maintain the appliance.
•
Explains how to prepare your site for installation, how to install the Cisco ADE 2130 and 2140 series appliance in an equipment rack, and how to troubleshoot and maintain the appliance.
Contains regulatory compliance and safety information.
Contains regulatory compliance and safety information.
Optical Networking
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, and "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
Routers
None at this time.
Security
New Documents
•
Contains up-to-date troubleshooting information and frequently asked questions. This information is generated by customer queries and developer input.
•
Identifies and links to installation and setup information for Cisco Security Manager 3.2 (Security Manager 3.2) and Auto Update Server 3.2 (AUS 3.2).
•
Provides requirements and procedures for installing Security Manager 3.2 on a Windows server and for installing dedicated client software for Security Manager 3.2 on a Windows PC. Includes pre- and postinstallation guidelines and troubleshooting information.
•
Describes new features available in Security Manager 3.2, provides important notes regarding the product, and lists recently resolved problems and currently known problems in Security Manager 3.2.
•
Lists the devices and operating system versions supported by AUS 3.2.
•
Lists the devices and operating system versions supported by Security Manager 3.2.
•
Provides detailed descriptions of all the features available in AUS 3.2 and procedures for implementing these features in your network.
•
Provides detailed descriptions of all the features available in Security Manager 3.2, procedures for implementing these features in your network, and comprehensive coverage of each field in the GUI.
Server Networking and Virtualization
None at this time.
Service Exchange
None at this time.
Storage Networking
None at this time.
Switches
New Documents
•
Describes the switch module setup procedure and basic installation.
•
Describes the switch module features, installation procedures, troubleshooting, cabling, and specifications.
•
Describes Cisco IOS messages by feature and provides a recommended action.
•
Describes how to use the CMP to monitor and troubleshoot the Cisco Nexus 7000 series hardware.
•
Describes how to install, connect, and manage Cisco Nexus 7000 series hardware.
•
Lists the regulatory information and translations for warnings that apply to the Cisco Nexus 7000 series hardware.
•
Describes how to prepare your site for the installation of Cisco Nexus 7000 series hardware.
Describes the switch module regulatory compliance and safety information and includes the translated warning statements.
•
Describe the software activation process.
TelePresence
None at this time.
Universal Gateways and Access Servers
None at this time.
Video, Cable, and Content Delivery
None at this time.
Voice and Unified Communications
New Documents
•
Provides information on how to use the Cisco Unified IP Phones 521G and 524G for Cisco Unified Communications Manager Express environments.
Provides quick reference information for using the Cisco Unified IP Phones 521G and 524G for Cisco Unified Communications Manager Express environments.
Provides information on how to use the Cisco Unified IP phones 7935 and 7936 for Cisco Unified Communications Manager Express environments.
Provides quick reference information for using the Cisco Unified IP Conference Station 7937 for Cisco Unified Communications Manager Express environments.
•
Provides information on how to use the Cisco Unified IP Phone 7921 (SCCP) for Cisco Unified Communications Manager Express environments.
Provides quick reference information for using the Cisco Unified IP Phone 7931G (SCCP) for Cisco Unified Communications Manager Express environments.
•
Provides information on how to use the Cisco Unified IP Phone 7931G (SCCP) for Cisco Unified Communications Manager Express environments.
Provides quick reference information on how to use the Cisco Unified IP Phones 7942G and 7962G for Cisco Unified Communications Manager Express environments.
Provides information on how to use the Cisco Unified IP Phones 7942G and 7962G for Cisco Unified Communications Manager Express environments.
Provides quick reference information on how to use the Cisco Unified IP Phones 7945G and 7965G for Cisco Unified Communications Manager Express environments.
Provides information on how to use the Cisco Unified IP Phones 7945G and 7965G for Cisco Unified Communications Manager Express environments.
Provides quick reference information on how to use the Cisco Unified IP Phones (SCCP) 7905G/7912G, 7906G/7911G, 7940G/7960G, and 7941G/7961G for Cisco Unified Communications Manager Express environments.
Provides quick reference information on how to use the Cisco Unified IP Phones 7970G and 7971G (SCCP) for Cisco Unified Communications Manager Express environments.
Provides information on how to use the Cisco Unified IP Phones 7970G and 7971G (SCCP) for Cisco Unified Communications Manager Express environments.
•
Provides information on how to use the Cisco Unified IP Phone 7975G for Cisco Unified Communications Manager Express environments.
Provides quick reference information on how to use the Cisco Unified IP Phone 7975G for Cisco Unified Communications Manager Express environments.
•
Presents the entire documentation set for this product in a new, community-editable format. Benefit from the expertise of the community, share your own expertise, or just explore the alternate format. Use the Discussion page for each article to exchange ideas or pose questions to the community at large. For more information, click the About DocWiki link at the bottom of any page in the wiki.
Revised Documents
•
Provides an alphabetical list of all CLI commands supported in Cisco Unified Communications Manager Express up to and including version 4.3.
•
Provides information about configuring and managing Cisco Unified Communications Manager Express up to and including version 4.3.
•
Provides an alphabetical list of all CLI commands supported in Cisco Unified SRST and SIP SRST up to and including version 4.3.
•
Describes the set of Cisco Unity Express command-line interface (CLI) commands and GUI options for installing and upgrading to the Cisco Unity Express 3.0 software.
•
Provides information about configuring and managing Cisco Unified Survivable Remote Site Technology (SRST) up to and including version 4.3.
•
Describes new features and significant software components for Cisco Unity Express 3.0 up to and including version 3.0.4.
Wireless
None at this time.
Obtaining Support from Cisco
Take (full) advantage of Cisco support opportunities at:
http://www.cisco.com/en/US/support/index.html
Use this website for the tasks listed below and more.
•
•
•
•
–
–
–
•
•
•
Submitting a Service Request
Open a service request online at:
http://www.cisco.com/techsupport/servicerequest
View a list of Cisco worldwide contacts, at:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Obtaining Additional Information
Information about Cisco products, services, technologies, and networking solutions is available from various online sources.
•
http://www.cisco.com/offer/subscribe
•
http://tools.cisco.com/Support/PAT/do/ViewMyProfiles.do?local=en
•
•
http://www.cisco.com/go/services
•
http://www.cisco.com/go/marketplace/
•
•
•
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
•
http://www.cisco.com/public/countries_languages.shtml
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0805R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.
Feedback