What's New in Cisco Product Documentation June 2008
Available Languages
Table Of Contents
What's New in Cisco Product Documentation
Application Networking Services
Server Networking and Virtualization
Universal Gateways and Access Servers
Video, Cable, and Content Delivery
Voice and Unified Communications
Obtaining Additional Information
What's New in Cisco Product Documentation
June 2008
What's New in Cisco Product Documentation lists new and revised Cisco documentation since the last release of this monthly publication. To subscribe to the What's New in Cisco Product Documentation RSS feed, paste the following URL into your RSS reader:
http://www.cisco.com/cdc_content_elements/rss/whats_new/whatsnew_rss_feed.xml
Previous releases of the What's New in Cisco Product Documentation are available at the following URL:
http://www.cisco.com/en/US/docs/general/whatsnew/archive/archive.html
New Edition of the Cisco Product Quick Reference Guide Available for Preorder on June 2, 2008
Stay Current on Cisco Products with This Valuable ToolAnnouncing the new Summer/Fall 2008 edition of the Cisco Product Quick Reference Guide—a complete portfolio of Cisco products and solutions for every part of your business. It provides information to readers from enterprise, service provider, and small and medium-sized businesses. This is your tool for matching today's business challenges with industry-leading products and solutions from Cisco. Compact, portable, and an easy-to-use reference, the guide summarizes information about many of Cisco's products sold through our channel partners. Inside the guide you will find a wealth of information, including brief product overviews, important features, technical specifications, part numbers, and ordering information.
For more information and to place your order on June 2, 2008, visit the Cisco Product Quick Reference Guide website athttp://www.cisco.com/go/guide.
Application Networking Services
None at this time.
Cisco Interfaces and Modules
New Documents
•
Cisco Application eXtension Platform 1.0 Command Reference
Provides an alphabetical list of all CLI commands supported in Cisco Unified Application eXtension platform version 1.0.
•
Provides information on how to create, package, and install applications on the Cisco Application eXtension Platform (Cisco AXP).
•
Describes the tasks and commands necessary to quickly configure the hardware and software for the Cisco Application eXtension Platform (Cisco AXP).
•
Describes the commands and tasks for installing and configuring the Cisco Application eXtension Platform (AXP) on Cisco's Integrated Service Routers.
•
Describes how to install the supported SPA interface processors (SIPs) and shared port adapters (SPAs) on the Cisco ASR 1000 series routers and how to troubleshoot the installation.
•
Describes the configuration and troubleshooting of SIPs and SPAs that are supported on the Cisco ASR 1000 series aggregation services routers.
•
Describes new features and significant software components for the Cisco Application eXtension 1.0.4 release.
Cisco IOS Software
Cisco IOS Documentation, Master Command Lists, and Command Lookup Tool Updates
All Cisco IOS documentation is now available from the new Product Selector Application on Cisco.com at the following URL:
http://www.cisco.com/web/psa/products/index.html
If you have not done so already, you should update your documentation bookmarks to the documentation pages listed under this URL.
To find a specific Cisco IOS release, choose "Cisco IOS Software" from the category list, and then choose the release you want to see. A Master Command List is available for each Cisco IOS release train. Click the "Master Index" link on the release landing page. The command lists are presented in a series of smaller files so that they open faster than did the larger, single file.
For information about all Cisco IOS commands, use the new Cisco IOS Master Command List, All Releases, at
http://www.cisco.com/en/US/docs/ios/mcl/allreleasemcl/all_book.html.
You can also use the Command Lookup Tool to search for all Cisco IOS commands at
http://tools.cisco.com/Support/CLILookup
End-of-Life or End-of-Sale Products
You have access to information about Cisco end-of-life or end-of-sale products from the Product Selector Application at
http://www.cisco.com/web/psa/products/index.html
or at the End-of-Life URL:
New Documents
•
Enables a router to support a maximum of 8192 unique policy maps for the performance routing engine 3 (PRE3) and PRE4, doubling the number supported in previous releases.
Enables you to display 5-minute traffic rates on virtual path (VP) counters.
•
Enables you to set the ATM cell loss priority (CLP) bit using the set-clp-transmit policing action.
•
Enables you to police and mark inbound Frame Relay traffic before forwarding it onto Any Transport over Multiprotocol Label Switching (AToM) Layer 2 Virtual Private Network (VPN) pseudowire.
•
Describes changes in command-line interface (CLI) command behavior in Cisco IOS Release 12.2(33)SB.
•
Describes the commands used by the Cisco IOS Integrated Session Border Controller to configure, debug, and show statistics.
•
Allows nonstop forwarding (NSF) relationships among routers connected by Gigabit EtherChannel (GEC) bundles.
•
Allows nonstop routing (NSR) relationships among routers connected by Gigabit EtherChannel (GEC) bundles.
•
Maintains Gigabit EtherChannel (GEC) configuration when a stateful switchover (SSO) occurs.
•
Allows a service provider to configure and support multicast traffic within a Virtual Private Network (VPN) environment that includes Gigabit EtherChannel (GEC) bundles.
•
Introduces support for policy-based routing (PBR) over Gigabit EtherChannel (GEC) bundles.
•
Introduces support for PPP over Ethernet (PPPoE) traffic on Gigabit EtherChannel (GEC) bundles.
•
Introduces support for PPP over Ethernet (PPPoE) QinQ traffic on Gigabit EtherChannel (GEC) bundles.
•
Introduces support for PPP over VLAN (PPPoVLAN) traffic on Gigabit EtherChannel (GEC) bundles.
•
Introduces support for several types of quality of service (QoS) policies on Gigabit EtherChannel (GEC) bundles.
•
Configures a drop policy for weighted random early detection (WRED) based on a cell loss priority (CLP) value.
•
Allows you to choose a unique pseudowire endpoint to switch traffic based on the combination of inner and outer VLAN IDs.
•
Provides a link failover time of 250 milliseconds or less and a maximum link failover time of 2 seconds.
•
Supports eight member links per Link Aggregation Control Protocol (LACP) bundle, an increase from four in previous software releases.
•
Allows redirection of your TCP or UDP traffic to a server to control and provide better user experience.
•
Extends the router's quality of service (QoS) functionality to support per-user QoS on IP sessions.
Bundles together a virtual private dialup network (VPDN) session on a single logical connection to form a Multilink PPP (MLP) bundle on an L2TP Network Server (LNS).
Enables the router to account for downstream Ethernet frame headers when applying shaping to packets.
•
Enables the router to shape session traffic on L2TP network server (LNS) outbound ATM interfaces.
Allows service providers to determine on which broadband remote access server (BRAS) a PPP call terminates.
Allows a port channel to remain in the LINK_UP state during a link switchover.
Enables you to police and mark inbound VLAN and QinQ traffic before forwarding the traffic onto the outbound link.
Allows the broadband aggregation system (BRAS) to provide multiple levels of quality of service (QoS) hierarchy that shape traffic at different points of congestion in a Layer 2 network.
Supports stateful switchover (SSO), In Service Software Upgrade (ISSU), Cisco nonstop forwarding (NSF), and nonstop routing (NSR) on Gigabit EtherChannel (GEC) bundles.
Revised Documents
•
Allows you to specify the path that Any Transport over MPLS (AToM) traffic uses.
Describes how echo packets are sent by the forwarding engine and forwarded back along the same path in order to perform detection.
Describes Border Gateway Protocol (BGP) support for Bidirectional Forwarding Detection (BFD), which is a detection protocol that is designed to provide fast forwarding path failure detection times for all media types, encapsulations, topologies, and routing protocols.
•
Adds Bidirectional Forwarding Detection (BFD) support for ATM, Frame Relay (FR), Packet over SONET (POS), and subserial interfaces.
•
Describes Bidirectional Forwarding Detection (BFD) sessions that are placed in an "Admin Down" state during a planned switchover.
•
Introduces static routing support for Bidirectional Forwarding Detection (BFD).
•
Adds Bidirectional Forwarding Detection (BFD) support to be VPN routing and forwarding (VRF) aware to provide fast detection of routing protocol failures between provider edge (PE) and customer edge (CE) routers.
Describes the interoperability between Bidirectional Forwarding Detection (BFD) versions 0 and 1.
Introduces new keywords to two existing commands to display information about local and inherited policies.
•
Simplifies the configuration of the site-of-origin (SoO) value.
•
Introduces support for continue clauses to be applied to outbound route maps.
•
Describes how to enable the Bidirectional Forwarding Detection (BFD) protocol.
•
Provides detailed information on platform-independent Cisco IOS commands; specifically, on command syntax, defaults, command modes, command history, usage guidelines, and examples.
Provides the ability to run Tool Command Language (Tcl) version 8.3.4 commands from the Cisco IOS command-line interface (CLI).
•
Allows the tracking of configuration changes entered on a per-session and per-user basis by implementing a configuration log.
•
Assists configuration management by enabling faster collection of running configuration file information.
•
Increases the operational robustness of Cisco IOS configuration and provisioning actions by implementing a "quick-save" functionality that saves just the commands entered since the last startup-config file was generated.
Provides modularization ("partitioning") of the running configuration state for granular access to the running configuration in Cisco IOS software.
•
Provides the capability to replace the current running configuration with any saved Cisco IOS configuration file to revert to a previous configuration state, effectively rolling back any configuration changes that were made since that configuration file was saved.
•
Allows configuration changes to be performed with an optional requirement that they be confirmed.
•
Describes how to enable Bidirectional Forwarding Detection (BFD) and register it with Intermediate System-to-Intermediate System (IS-IS) to receive forwarding path detection failure messages from BFD.
•
Describes how to configure the Bidirectional Forwarding Detection (BFD) protocol and register it with Open Shortest Path First (OSPF) to receive forwarding path detection failure messages from BFD.
•
Lets you capture multicast-specific data (both packets and bytes) for multicast flows.
•
Allows you to transfer digital subsriber line (DSL) information from the L2TP access concentrator (LAC) to the L2TP network server (LNS).
•
Provides the ability to perform a line-by-line comparison of any two configuration files (accessible through the Cisco IOS File System [IFS]) and generates a list of the differences between them.
Allows a port channel to be shut down when the number of active links falls below the minimum threshold.
•
Allows interworking at Layer 2 between Ethernet VLANs and ATM virtual circuits (VCs).
•
Allows interworking at Layer 2 between Ethernet VLANs and Frame Relay.
•
Allows you to have exclusive change access to the Cisco IOS running configuration, preventing multiple users from making concurrent configuration changes.
•
Allows Internet service providers (ISPs) to offer IPv6 Virtual Private Network (VPN) services to their customers.
Provides the capability to monitor Layer 3 Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs) proactively.
•
Provides the capability to discover the equal-cost multipaths for carrying Multiprotocol Label Switching (MPLS) traffic between the source and destination provider edge (PE) routers.
Provides the capability to gather Ethernet-layer network performance metrics.
•
Adds virtual circuit connectivity verification (VCCV) support for pseudowire emulation edge-to-edge (PWE3) services across Multiprotocol Label Switching (MPLS) networks.
Provides the capability to schedule multiple IP Service Level Agreement (SLA) operations to begin at random intervals uniformly distributed over a specified duration of time and to restart at uniformly distributed random frequencies within a specified frequency range.
•
Describes how to configure Intelligent Service Gateway (ISG) and Cisco Service Control Engine (SCE) to function as a single policy enforcement point for subscriber sessions.
•
Introduces IP subscriber session keepalive support for monitoring session data traffic in the upstream direction for idleness using Address Resolution Protocol (ARP) for Layer 2 connected subscribers and Internet Control Message Protocol (ICMP) for Layer 3 connected subscribers.
Allows you to switch Layer 2 data between two interfaces on the same router, and in some cases to switch Layer 2 data between two circuits on the same interface port.
•
Enables system logging messages to be saved on an advanced technology attachment (ATA) flash disk.
•
Describes the MIBs that support the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) based on RFC 3815.
•
Allows you to use the Simple Network Management Protocol (SNMP) to monitor a label switch router (LSR) that is using the Multiprotocol Label Switching (MPLS) technology remotely.
•
Describes the MPLS-L3VPN-STD-MIB that supports Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs) based on RFC 4382.
•
Describes the Multiprotocol Label Switching (MPLS) enhancements to the existing Interfaces MIB (RFC 2233) to support an MPLS layer.
Ensures that the Label Distribution Protocol (LDP) is fully established before the Interior Gateway Protocol (IGP) path is used for switching.
•
Introduces command-line interface (CLI) commands to modify the way in which Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) handles local label allocation.
•
Enables a Label Distribution Protocol (LDP) session to be password-protected without tearing down and reestablishing the LDP session.
•
Allows Multiprotocol Label Switching (MPLS) static labels to be used for Virtual Private Network (VPN) routing and forwarding (VRF) traffic.
Provides the means to configure statically the binding between a label and an IPv4 prefix and the contents of a Label Forwarding Information base (LFIB) crossconnect entry.
•
Reduces the downtime of a provider edge (PE)-customer edge (CE) link failure by rerouting PE-egress traffic onto a backup path to the CE before Border Gateway Protocol (BGP) has reconverged.
•
Introduces Cisco IOS command-line interface (CLI) commands that allow you to enable an IPv4 and IPv6 Virtual Private Network (VPN) in the same VPN routing and forwarding (VRF) instance and to simplify the migration from a single-protocol VRF configuration to a multiprotocol VRF configuration.
•
Enables a broadband aggregation system (BRAS) to account for various encapsulation types when quality of service (QoS) functionality is applied to packets.
Adds Cisco nonstop forwarding (NSF) and stateful switchover (SSO) to Any Transport over Multiprotocol Label Switching (AToM).
Provides the ability to shut down temporarily a protocol in the least disruptive manner and notify its neighbors that it is going away.
Reduces update activity in the global Routing Information Base (RIB) so that fewer packets are dropped.
•
Removes the requirement for each PPP over Ethernet (PPPoE) VLAN to be created on a subinterface to increase the number of VLANs that can be configured on a router to 4000 VLANs per interface and adds ATM permanent virtual circuit (PVC) support for PPPoE over VLAN traffic that uses bridged RFC 1483 encapsulation.
Preserves VLAN IDs and keeps traffic in different customer VLANs segregated when used on the subinterface level.
•
Enables the session limit configured locally on the broadband remote access server (BRAS) or L2TP access concentrator (LAC) to override the per-network access server (NAS)-port session limit downloaded from the RADIUS server when Subscriber Service Switch (SSS) preauthorization is enabled.
•
Introduces the capability to define and control quality of service (QoS) for incoming customer traffic on a provider edge (PE) router in a service provider network.
•
Describes new features and significant components for the Cisco AS5x00 Universal Gateways that support Cisco IOS Release 12.4(15)XY3.
•
Describes new features and significant components for the Cisco IAD2430 series Integrated Access Devices that support Cisco IOS Release 12.4(15)XY3.
•
Describes new features and significant software components for the Cisco IAD2801 series Integrated Access Devices that support Cisco IOS Release 12.4(15)XY3.
•
Describes new features and significant components for the Cisco 2800 Series Integrated Services routers that support Cisco IOS Release 12.4(15)XY3.
•
Describes new features and significant components for the Cisco 3800 Series Integrated Services routers that support Cisco IOS Release 12.4(15)XY3.
•
Describes new features and significant components for the Cisco 800 series routers that support Cisco IOS Release 12.4(15)XY3.
•
Describes new features and significant components for the Cisco 1800 series routers that support Cisco IOS Release 12.4(15)XY3.
•
Allows a service provider edge (PE) router on the local end of an Ethernet over Multiprotocol Label Switching (EoMPLS) pseudowire to detect a remote link failure and shutdown of the Ethernet port on the local customer edge (CE) router.
•
Introduces MIB functionality to manage and monitor multilink Frame Relay interfaces via the use of MIB tables.
Adds In-Service Software Upgrade (ISSU) support to the Simple Network Management Protocol (SNMP).
•
Verifies that the path of an incoming packet is consistent with the local packet forwarding information.
•
Introduces IEEE 802.3ad link aggregation (LAG) MIB support in Cisco IOS software.
Allows you to create virtual private dialup network (VPDN) tunnels that use a customer VPN routing and forwarding (VRF) address from a VRF routing table as the tunnel endpoint.
Cisco NX-OS Software
New Documents
•
Describes how to upgrade and downgrade Cisco NX-OS software images.
Revised Documents
•
Describes the features, caveats, and limitations for Cisco NX-OS software. Updated for Release 4.0(1a).
Interoperability Systems
None at this time.
Network Management
New Documents
•
Provides information on how to create, package, and install applications on the Cisco Application eXtension Platform (Cisco AXP).
•
Describes the tasks and commands necessary to quickly configure the hardware and software for the Cisco Application eXtension Platform (Cisco AXP).
•
Describes the commands and tasks for installing and configuring the Cisco Application eXtension Platform (AXP) on Cisco's Integrated Service Routers.
•
Provides an alphabetical list of all CLI commands supported in Cisco Unified Application eXtension platform version 1.0.
•
Describes new features and significant software components for the Cisco Application eXtension 1.0.4 release.
Revised Documents
•
Enhances the encryption capabilities of Simple Network Management Protocol (SNMP) version 3.
•
Implements the alarm filter profile capability defined in the CISCO-ENTITY-ALARM-MIB.
•
Describes the features, system requirements, and caveats for Cisco DCNM. Updated for Release 4.0(1a).
•
Introduces the CISCO-CEF-MIB that allows management applications through the use of the Simple Network Management Protocol (SNMP) to configure and monitor Cisco Express Forwarding operational data and to provide notification when Cisco Express Forwarding encounters specific configured events.
•
Describes a collection of services that provide remote event-driven configuring of Cisco IOS networking devices and remote execution of some command-line interface (CLI) commands.
•
Adds two options to the cns config retrieve command enabling you to specify an amount of time in seconds to wait before attempting to retrieve a configuration from a trusted server.
Assists in the initial configuration and subsequent partial configurations on a Cisco IOS device.
Describes the Cisco IOS infrastructure that allows Cisco IOS applications to publish and subscribe to events on a Cisco Network Services (CNS) Event Bus.
Describes the Cisco IOS infrastructure that enables automated installation and activation of Cisco IOS images on Cisco IOS networking devices.
Allows you to schedule fully qualified EXEC mode CLI commands to run once, at specified intervals, at specified calendar dates and times, or upon system startup.
•
Allows you to monitor the usage of resources by gathering resource usage information using MIB objects.
•
Allows Simple Network Management Protocol (SNMP) traps and informs to be sent and received using Virtual Private Network (VPN) routing and forwarding (VRF) tables.
Introduces enhancements to the Generic Online Diagnostics (GOLD) Event Detector for Cisco Catalyst 6500 Series switches.
•
Allows you to monitor internal system resource usage for specific resources such as the buffer, memory, and CPU.
•
Provides a programmable framework that allows you to filter, escalate, correlate, route, and customize system logging messages prior to delivery by the Cisco IOS system message logger.
•
Introduces the ip http accounting commands used to specify a particular accounting method for Hypertext Transfer Protocol (HTTP) server users.
•
Enables Simple Network Management Protocol (SNMP) configuration of periodic MIB data collection and transfer mechanisms.
•
Leverages context-based Simple Network Management Protocol (SNMP) to extend support for existing MIBs from representing the management information for just the base topology to representing the same information for multiple topologies.
•
Provides the ability to transfer selected MIB data periodically from Cisco IOS-based devices to specified Network Management Stations (NMS).
•
Allows a device to be customized for receipt of syslog messages using Blocks Extensible Exchange Protocol (BEEP).
Optical Networking
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, and "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
Routers
New Documents
•
Contains instructions for installing and upgrading the performance routing engine 4 (PRE4) in a Cisco 10008 router.
•
Provides an online directory to quickly access publications for the Cisco ASR 1000 series routers.
Provides instructions for installing the Cisco ASR 1000 series routers and replacing or upgrading field-replaceable units (FRUs).
•
Describes Cisco ASR 1000 series routers product implementation of the MIB protocol.
•
Contains platform-specific information that does not fit logically into the train-based Cisco IOS configuration guides.
•
Provides a summary of the hardware installation guide for the Cisco ASR 1004 router.
•
Provides a summary of the hardware installation guide for the Cisco ASR 1006 router.
Describes the Cisco IOS XE Integrated Session Border Controller (SBC) functions, features, and configuration tasks.
•
Introduces support for 802.1Q and QinQ subinterfaces on Gigabit EtherChannel (GEC) bundles.
Provides international agency compliance, safety, and statutory information and translations for the safety warnings for the Cisco ASR 1000 series routers.
Security
New Documents
•
Provides user-level punt monitoring, configurable rate and burst size for the divert cause policer, and drop alarms for packet drops by the Route Processor (RP) queues and the divert cause policer.
Revised Documents
•
Describes installation and configuration of the Clean Access Manager via the CAM web console for Cisco NAC Appliance, Release 4.1(3).
•
Describes installation and configuration of the Clean Access Server (including failover, DHCP, AD SSO, and VPN concentrator integration) for Cisco NAC Appliance, Release 4.1(3).
•
Provides Secure Socket Layer (SSL) version 3.3 support for the HTTP 1.1 server and HTTP 1.1 client within Cisco IOS software to include server authentication, encryption, and message integrity to allow secure HTTP communications.
Allows you to enable either the Network Configuration (NETCONF) protocol server or the NETCONF client to initiate a connection, thus supporting large networks of intermittently connected devices and those devices that must reverse the management connection where there are firewalls and Network Address Translators (NATs).
Enables you to perform network configurations via Cisco command-line interface (CLI) over an encrypted transport.
Allows a network administrator to define "views," which are a set of operational commands and configuration capabilities that provide selective or partial access to Cisco IOS EXEC and configuration (config) mode commands.
•
Supports throttling of access (authentication and authorization) and accounting records that are sent to the RADIUS server so that you can configure the appropriate throttling rate to avoid network congestion and instability, such as when there is insufficient bandwidth to accommodate a sudden burst of records generated from the Cisco IOS router to the RADIUS server.
Server Networking and Virtualization
None at this time.
Service Exchange
None at this time.
Storage Networking
None at this time.
Switches
New Documents
Describes the Layer 2+ and Layer 3 CLI commands supported by the switch.
Describes how to configure the Layer 2+ and Layer 3 software features.
Revised Documents
•
Provides information on installing the Catalyst 6500 series switch chassis with new information about the WS-X6716-10G-3C and WS-X6716-10G-3CXL modules, and X2 transceivers.
•
Provides information on installing the Catalyst 6500 series switches with new switch information, new module power and heat measurements, and Catalyst 6509-V-E information, including cable management information.
•
Provides information on installing the Catalyst 6500 supervisor engines with new information about the Catalyst 6509-V-E switch chassis and the Supervisor Engine 720-10GE.
Describes the system requirements, limitations, and caveats for the Cisco Catalyst Blade Switch 3020 for HP. Revised for Cisco IOS Release 12.2(44)SE2.
•
Describes the system requirements, limitations, caveats, and updated system messages for the Catalyst 3550 switches. Revised for Cisco IOS Release 12.2(44)SE2.
Describes the system requirements, limitations, and caveats for the Catalyst 3750, 3560, 2970 and 2960 switches. Revised for Cisco IOS Release 12.2(44)SE2.
•
Describes the system requirements, limitations, caveats, and updated system messages for the Catalyst 2918 switches. Revised for Cisco IOS Release 12.2(44)SE2.
Describes the system requirements, limitations, and caveats for the Catalyst 3750-E and 3560-E switches. Revised for Cisco IOS Release 12.2(44)SE2.
•
Describes the system requirements, limitations, and caveats for the Catalyst 3750 Metro switches. Revised for Cisco IOS Release 12.2(44)SE2.
Describes the system requirements, limitations, and caveats for the Cisco Catalyst Blade Switch 3020 for HP. Revised for Cisco IOS Release 12.2(44)SE2.
•
Describes the system requirements, limitations, and caveats for the Cisco Catalyst Blade Switch 3030. Revised for Cisco IOS Release 12.2(44)SE2.
Describes the system requirements, limitations, and caveats for the Cisco Catalyst Blade Switch 3040 for FSC switches. Revised for Cisco IOS Release 12.2(44)SE2.
•
Describes the system requirements, limitations, and caveats for the Cisco ME 2400 series Ethernet switches. Revised for Cisco IOS Release 12.2(44)SE2.
Describes the system requirements, limitations, and caveats for the Cisco ME 3400 series Ethernet switches. Revised for Cisco IOS Release 12.2(44)SE2.
TelePresence
None at this time.
Universal Gateways and Access Servers
None at this time.
Video, Cable, and Content Delivery
None at this time.
Voice and Unified Communications
None at this time.
Wireless
None at this time.
Obtaining Support from Cisco
Take (full) advantage of Cisco support opportunities at:
http://www.cisco.com/en/US/support/index.html
Use this website for the tasks listed below and more.
•
•
•
•
–
–
–
•
•
•
Submitting a Service Request
Open a service request online at:
http://www.cisco.com/techsupport/servicerequest
View a list of Cisco worldwide contacts, at:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Obtaining Additional Information
Information about Cisco products, services, technologies, and networking solutions is available from various online sources.
•
http://www.cisco.com/offer/subscribe
•
http://tools.cisco.com/Support/PAT/do/ViewMyProfiles.do?local=en
•
•
http://www.cisco.com/go/services
•
http://www.cisco.com/go/marketplace/
•
•
•
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
•
http://www.cisco.com/public/countries_languages.shtml
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0805R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.
Feedback