Managed Device Support Matrix

The following table lists the level of support offered by the Cisco FindIT Network Manager for the products that make up the Cisco 100 to 500 Series portfolio. The features supported are primarily determined by the management protocols supported by the device, and so may be dependent on the device firmware version. Check this document regularly for updates.

The FindIT Network Manager functionality is divided into the following areas:

  • Discovery—Includes the ability to detect the device and display detailed information about the device

  • Monitoring—Perform real time monitoring of the device through the Dashboard

  • Operations—Firmware upgrade, configuration save/backup/restore, device reboot

  • Configuration—Includes functionality offered by the Device View, System Configuration and Network pages

  • Reporting—Device is included in network reports

Table 1. Device Support List

Product

Discovery

Monitoring

Operation

Configuration

Reporting

Routers

RV110W

RV130/RV130W

RV132W/RV134W

RV160/RV160W

(min Probe ver 1.1.2)

RV180/RV180W

RV215W

RV260/RV260x

(min Probe ver 1.1.2)

RV320/RV325

(ver: 1.4.2.15 and above)

(ver: 1.4.2.15 and above)

RV340/RV340W

(min FW ver 1.0.1.17)

RV345/RV345P

Switches

90/100/110 Series Unmanaged

SG200-08/SG200-08P

200 Series Smart

220 Series Smart Plus

250 Series Smart

300 Series Managed

350 Series Managed

500 Series Stackable

550 Series Stackable

Wireless Access Points

WAP121

WAP125

WAP131

WAP150

(ver: 1.1.0.x and above)

(ver: 1.1.0.x and above)

WAP321

WAP351

WAP361

(ver: 1.1.0.x and above)

(ver: 1.1.0.x and above)

WAP371

(ver:1.3.0.x and above)

(ver:1.3.0.x and above)

WAP551/WAP561

WAP571/WAP571E

(ver:1.0.1.x and above)

(ver:1.0.1.x and above)

WAP581


Note

The Wireless Network and Client reports include only limited data from the following devices:

WAP121, WAP131, WAP321, WAP351 and WAP551/561



Note

A firmware version of 1.4.2.x or higher is recommended for 200, 300, and 500 series switches.



Note

Configuration of switch ports is not supported for routers.


Network Plug and Play Support

The following table lists the devices and applications in the Cisco 100 to 500 series portfolio that support Cisco Network Plug and Play.

Table 2. Network Plug and Play Support List

Product

Minimum Version

DHCP Discovery

DNS Discovery

Redirection Service

Firmware Download

Configuration Download

Server

FindIT Network Manager

1.1.0

N/A

N/A

Switches

250 Series Smart Switch

2.3.5.xx

(ver:2.5.0.x and above)

350 Series Managed Switch

2.3.5.xx

(ver:2.5.0.x and above)

550 Series Stackable Switch

2.3.5.xx

(ver:2.5.0.x and above)

Routers

RV160 Series Routers

1.0.0.x

RV260 Series Routers

1.0.0.x

RV34X Series Routers

1.0.2.x

Access Points

WAP125

1.0.1.7

WAP150

1.1.1.x

WAP361

1.1.1.x

WAP571/571E

1.1.0.x

WAP581

1.0.1.5

Embedded FindIT Network Probe Support

The following table lists the devices and applications in the Cisco 100 to 500 series portfolio that support an embedded FindIT Network Probe:

Table 3.

Product

Firmware Version

Probe Version

#Managed Devices

Switches

250 Series Smart

2.4.5.x and 2.5.0.x

1.1.2

15

2.5.5.x and above

2.1.0

15

350 Series Managed

2.4.5.x and 2.5.0.x

1.1.2

15

2.5.5.x and above

2.1.0

15

550 Series Managed

2.4.5.x and 2.5.0.x

1.1.2

15

2.5.5.x and above

2.1.0

15