Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
Technical Specifications
Downloads: This chapterpdf (PDF - 129.0KB) The complete bookPDF (PDF - 8.76MB) | Feedback

Table of Contents

Technical Specifications

Cisco uBR10012 Chassis and Chassis Components

Network Uplink Cards and Cable Interface Line Cards

SIP and SPA

Technical Specifications

This appendix provides specifications information about the Cisco uBR10012 router, router components, and cards used in the router.

Cisco uBR10012 Chassis and Chassis Components

Table A-1 lists the physical specifications for the Cisco uBR10012 universal broadband router and its components.

 

Table A-1 Cisco uBR10012 Router and Router Components Physical Specifications

Description
Specifications

Chassis specifications

  • Weight: 235 lb (106.6 kg) fully configured chassis
  • Height: 31.25 in. (79.4 cm)—18 Rack Units (RU)
  • Width: 17.2 in. (43.7 cm)
  • Depth: 22.75 in. (57.8 cm)
  • Mounting: 19 in. rack mountable (front or rear),
    2 units per 7 ft. rack

Note Mounting in 23 in. racks is possible with optional third-party hardware.

Temperature range

  • Operating: 41 ° F to 104 ° F (5 to 40 ° C)
  • Storage: −40 ° F to 158 ° F (−40 to 70 ° C)

Relative humidity

  • Operating—nominal: 5% to 85%
  • Storage: 5% to 95% percent

Operating altitude

–197 to 13,123 ft. (–60 to 4000 m)

Airflow

280 cfm1 (approximately) through the system fan assembly module (low speed, normal operating temperatures, with clean air filter)

450 cfm (approximately) through the system fan assembly module (high speed, chassis temperature at air outlet exceeds 40 ° C, with clean air filter)

Operating vibrations

5 to 200 Hz, 1 g (1 octave/min), 200 to 500 Hz, 2 g (1 octave/min)

Chassis power consumption

Not to exceed 2400 W2 (8189btu3)

DC Power entry modules (PEM)— 34-1651-04, 34-1651-05

Power supply monitoring cable

Supports two separate input feeds (–48 to –60VDC) by means of built-in two-position terminal blocks.

Part Number: UBR10-PWR-DC (Primary)

Part Number: UBR10-PWR-MON-CAB
Part Number: UBR10-PWR-MON-CAB= (Spare)

  • Dimensions

Height: 19.25 in (48.894 cm)
Width: 6 in. (15.24 cm)
Depth: 5 in. (12.4 cm)

  • Weight: 10 lbs. (4.54 kg)
  • Temperature range

Operating: 41 ° F to 104 ° F (5 ° C to 40 ° C)
Storage: -40 ° F to 158 ° F (-40 ° C to 70 ° C)

The Power output, DC input voltage and DC input current vary for the Cisco DC PEM entry modules. See Table 2-2.

DC Power entry modules (PEM)—341-0388-01

Part Number: UBR10-PWR-DC-PLUS (Primary)
Part Number: UBR10-PWR-DC-PLUS= (Spare)

  • Dimensions:

Height: 19.25 in. (48.894 cm)
Width: 6 in. (15.24 cm)
Depth: 5 in. (12.4 cm)

  • Weight: 16 lbs. (7.25 kg)
  • DC-input Voltage: –48 to –60 VDC nominal
    –40.5 to –72 VDC minimum to maximum
  • DC-input Current Connections: 50 A + 50 A
  • Power Output: 3300 W maximum
  • Temperature range:

Operating: 41 ° F to 104 ° F (5 ° C to 40 ° C)
Storage: -40 ° F to 158 ° F (-40 ° C to 70 ° C)

  • Relative Humidity:

Operating: 5% to 85%, non-condensing
Storage: 5% to 95%, non-condensing

  • Operating Altitude: –197 to 13,693 feet (–60 to 4000 m)

AC Power entry modules (PEM) 34-1966-02

100—120 VAC operation is not supported

Part Number: UBR10-PWR-AC (Primary)
Part Number: UBR10-PWR-AC= (Spare)

  • Dimensions:

Height: 19.25 in. (48.89 cm)
Width: 6 in. (15.24 cm)
Depth: 5 in. (12.4 cm)

  • Weight: 14.7 lbs (6.65 kg)
  • AC input voltage rating: 200-240 VAC @ 50/60Hz
  • AC operating voltage rating: 180-255 VAC @ 50/60Hz
  • AC input power connections: 13 A
  • DC output voltage: 54 VDC maximum
  • DC output current: 45.3 A maximum
  • Power output: 2650W maximum
  • Temperature range:

Operating: 23 to 122 F (-5 to 50 C)
Storage: -13 to 158 F (-25 to 70 C)

AC Power entry modules (PEM) 341-0387-01

100—120 VAC operation is not supported

Part Number: UBR10-PWR-AC-PLUS (Primary)
Part Number: UBR10-PWR-AC-PLUS= (Spare)

  • Dimensions:

Height: 19.4 in. (49.3 cm)
Width: 6 in. (15.2 cm)
Depth: 5 in. (12.7 cm)

  • Weight: 19 lbs (8.64 kg)
  • AC input voltage rating: 200-240 VAC @ 50 or 60Hz
  • AC operating voltage rating: 180-255 VAC @ 50 or 60Hz
  • AC input power connections: 13 A + 13 A
  • DC output voltage:

57.5 VDC nominal
59.0 VDC maximum

  • DC output current:

58 A nominal
59 A maximum

  • Power output: 3300 W maximum
  • Temperature range:

Operating: 41 ° to 104 ° F (5 ° to 40 ° C)
Storage: –40 ° to 158 ° F (–40 ° to 70 ° C)

  • Relative Humidity:

Operating: 5% to 85%, non-condensing
Storage: 5% to 95%, non-condensing

  • Operating Altitude: –197 to 13,693 feet (–60 to 4000 m)

AC power shelf

2400W AC-input power shelf and DC PEM bundle

UBR10-PWR-AC-EXT=

  • Chassis dimensions

Height: 3.46 in. (87.9 cm)
Width: 19 in. (482.26 cm)
Depth: 12.00 in. (304.2 cm)
Mounting: 19-inch rack mountable (2 rack units)

  • Weight

Shelf only: 7 lb. (3.2 kg)
Each power module only: 7 lb. (3.2 kg)
Fully configured shelf: 28 lb. (12.8 kg)

  • AC-input voltage and frequency:100,120 to 200,240 VAC, 50/60 Hz
  • AC voltage and current:

110 VAC at 15A maximum with power factor correction (PFC)
240 VAC at 7.4 A maximum with power factor correction (PFC)

  • AC power cable receptacle: IEC-320 15A receptacle that accepts right-angle cords
  • Temperature range:

Operating: 41 F to 104 F (5 C to 40 C)
Storage: -40 F to 158 F (-40 C to 70 C)

Visual alarm indicator relay contacts

Rated for a maximum of 60 VDC and 1 A.

Timing, Communication, and Control Plus (TCC+) Card

Part Number:UBR10-TCC+-T1

  • Power consumption: 40 W2 (136.5 BTU3) per hour
  • Weight:1.5 lb (0.5636 kg)
  • Height: 4.73 in (12.01 cm)
    Depth: 10.00 in (25.4 cm)
    Width: 1.55 in (3.937 cm)
  • MTBF: 431,348 hours

DOCSIS Timing & Control Card (DTCC)

Part Number: UBR10-DTCC

  • Power consumption: 12 Watts (40.94 BTU 1 per hour)
  • Weight:1.5 lb. (.68 kg)
  • Height: 4.73 in. (12.0142 cm)

Depth: 10 in. (25.4 cm)

Width: 1.548 in. (3.93192 cm)

  • MTBF: 431,348 hours

Fan assembly module

Part Number: UBR10-FAN-ASSY (Primary)
Part Number: UBR10-FAN-ASSY= (Spare)

  • Product number (cable): UBR10-FAN-CAB=
  • Power consumption: 250 W 2—4 amps, not to exceed 6 amps at startup (1365 BTU3) per hour
  • Weight: 30 lb (13.61 kg)
  • Height: 5.60 in. (14.22 cm)
    Depth: 16.15 in. (41.02 cm)
    Width: 19.00 in. (48.26 cm)
  • Temperature range:

Operating: 41 ° to 104 ° F (5 ° to 40 ° C)
Storage: –40 ° to 158 ° F (–40 ° to 70 ° C)

  • Relative humidity:

Operating: 5% to 85%
Storage: 5% to 95%

  • Operating altitude: –197 to 13,123 ft (–60 to 4000 m)

Fan assembly module

Part Number: UBR10012-FAN-PLUS (Primary)
Part Number: UBR10012-FAN-PLUS= (Spare)

  • Product number (cable): UBR10-FAN-CAB=
  • Power consumption: 224 W max (4 amps, not to exceed 6 amps at startup)Weight: 22 lbs (10 kg)
  • Height: 5.85 in. (14.9 cm)
    Width: 17 in. (43.2 cm)
    Depth: 20 in. (50.8 cm)
  • Acoustic: Sound Power (dB [re 1E-12] watts) < 78 dB up to 80.6 ° F (27 ° C)
  • Temperature range:

Operating: 41 ° to 104 ° F (5 ° to 40 ° C)
Storage: –40 ° to 158 ° F (–40 ° to 70 ° C)

  • Relative humidity:

Operating: 5% to 85%
Storage: 5% to 95%

  • Operating altitude: –197 to 13,123 ft (–60 to 4000 m)

LCD module

Part number: module–UBR10-DSPL=
Part number: cable–UBR10-DSPL-CAB=

  • Power consumption: 2W2 (6.824 BTU3) per hour
  • Weight: 0.4 lb (0.1814 kg)
  • Height: 4.0 in. (10.16 cm)
    Depth: 4.8 in. (12.19 cm)
    Width: 1.4 in. (3.56 cm)
  • MTBF: module–231,576 hours
  • MTBF: cable–N/A

Performance routing engine (PRE)

PRE1 modules:

  • ESR-PRE1 (Primary and redundant)
    ESR-PRE1= (Spare)

PRE2 modules

  • ESR-PRE2 (Primary and redundant)
    ESR-PRE2/R= (Spare)

PRE4 modules

  • ESR-PRE4 (Primary and redundant)
    ESR-PRE4/R= (Spare)

Max per chassis: 2

Power consumption:

  • PRE and PRE1: 80 Watts (273 BTU per hour)
    PRE2: 200 Watts (682.4 BTU 1 per hour)
    PRE4: 210 Watts (716.5 BTU 1 per hour)

Weight:

  • PRE and PRE1: 7.5 lb (3.41 kg)
    PRE2: 8.45 lb (3.84 kg)
    PRE4: 9.0 lb (4.09 kg)
  • Height: 16.0 in. (40.64 cm)
    Depth: 9.97 in. (25.32 cm)
    Width: 1.91 in. (4.84 cm)

MTBF:

  • PRE and PRE1: 116,904 hours
    PRE2: 122,426 hours
    PRE4: 106,574 hours

Three interface ports:

  • RJ-45 IEEE 802.3 Ethernet 100Base-T
    RJ-45 auxiliary (AUX) port for modem access
    RJ-45 console (CON) port for terminal access

PRE PC media card options

PRE4 CompactFlash Disk options

PRE DRAM memory options

  • Slot 0, Slot 1
  • Disk0
    512 MB—Part Number: ESR-PRE-CF-512MB(=)
    1 GB—Part Number: ESR-PRE-CF-1GB(=)
  • 40 MB—Part Number: ESR-PRE-MEM-FD40
    128 MB—Part Number: ESR-PRE-MEM-FD128
    512 MB—Part Number: ESR-PRE-MEM-512M

1.cfm = Cubic feet per minute

2.W = Watts

3.BTU = British thermal units

Network Uplink Cards and Cable Interface Line Cards

Table A-2 lists the physical specifications for the cards used with the Cisco uBR10012 router.

 

Table A-2 Cards Used in the uBR10012 Router

Description
Specifications

Cisco Gigabit Ethernet line card

  • UBR10-1GE and UBR10-1GE=
  • Power consumption:25 W4 (85.3 BTU2)
  • Weight: 4.75 lb (2.16 kg)
  • Height: 16.0 in. (40.64 cm)
    Depth: 9.97 in. (25.32 cm)
    Width: 1.12 in. (2.83 cm)
  • MTBF: 183,4431 hours

Gigabit Ethernet Converter (GBIC) Types:

  • 1000Base-SX (SFP-GE-S), multimode
  • 1000Base-LX/LH (SFP-GE-L), single mode
  • 1000Base-ZX (GLC-ZX-SM), single-mode

Cisco Half-Height Gigabit Ethernet line card

  • ESR-HH-1GE and ESR-HH-1GE=
  • Power consumption:15.98 W (54.53 BTU2)
  • Weight: 2 lb (0.9 kg)
  • Height: 7.8 in. (19.8 cm)
    Depth: 11.0 in. (27.9 cm)
    Width: 1.3 in. (3.3 cm)
  • MTBF: 449,330 hours

Gigabit Ethernet Converter (GBIC) Types:

  • 1000Base-SX (SFP-GE-S)
  • 1000Base-LX/LH (SFP-GE-L)
  • 1000Base-ZX (GLC-ZX-SM)
  • 1000Base-T (GLC-T)

Slot splitter card

  • ESR-HH-CARRIER
  • Weight: 2.28 lb (1.05 kg)
  • Height: 16.0 in. (40.64 cm)
    Depth: 10.50 in. (26.67 cm)
    Width: 1.80 in. (3.00 cm)

Half-height slot blank cover

  • ESR-HH-COVER

Full-height slot blank cover

  • ESR-COVER

SFP optical power budget—1000Base-SX GBIC

  • Power budget: 7.5 dB
  • Transmit power: –9.5 to 0 dBm
  • Receive power: –17 to 0 dBm

SFP optical power budget—1000Base-LX/LH GBIC

  • Power budget: 7.5 dB (multimode fiber), 8 dB (single mode)
  • Transmit power: –11.5 to -3 dBm (multimode fiber), –11 to –3 dBm (single mode)
  • Receive power: –19 to –3 dBm (multimode and single mode fiber)

SFP optical power budget—1000Base-ZX GBIC

  • Power budget: 23 dB
  • Transmit power: 0 to 4.77 dBm
  • Receive power: –23 to 0 dBm

Cisco OC-12 Packet Over SONET (POS) line card

  • UBR10-1OC12/P-SMI, UBR10-1OC12/P-SMI=
  • Power: 28W1 (95.54 BTU2)
  • Weight: 4.75 lb (2.16 kg)
  • Height: 16.0 in. (40.64 cm)
    Depth: 9.97 in. (25.32 cm)
    Width: 1.12 in. (2.83 cm)
  • MTBF:329,349 hours

Cisco OC12SML-DPT WAN line card

  • USB-SRP-OC12SML, USB-SRP-OC12SML=
  • Power consumption: 110 W1 (375.3 BTU2)
  • Weight: 6 lb (2.72 kg)
  • Height: 16 in. (40.64 cm)
    Depth: 10.56 in. (26.82 cm)
    Width: 2.38 in. (6.05 cm)
  • MTBF: 153,624 hours

Cisco uBR10012-OC48 DPT/POS interface module

Single-mode, short-reach modules

Single-mode, long-reach modules

 

  • Spares (2)—UBR10-SRP-OC48SMS=
    Spare (1)—ESR1048/P/SRPMS=
  • Spares (2)—UBR10-SRP-OC48SML=
    Spare (1)—ESR1048/P/SRPML=
  • Power consumption: 28 W1 (95.54 BTU2)
  • Weight: 4.75 lb (2.16 kg)
  • Height: 16 in. (40.64 cm)
    Depth: 9.87 in. (25.32 cm)
    Width: 1.12 in. (2.83 cm)

MTBF:

  • SMS—216,018 hours
  • SML—215,068 hours

Cisco uBR10-MC5X20S/U cable interface line cards

  • Cisco UBR10-MC5X20S=
  • Cisco UBR10-MC5X20U=
  • Power consumption: 185W 1 (631.2 BTU 2 /hr)
  • Weight:16 lb (7.26 kg)
  • Width: 1.36 in (3.55 cm)
    Height: 20 in. (50.80 cm)
    Depth: 16 in. (10.64 cm)
  • Cisco UBR10-MC5X20S MTBF: 38, 922 hours
  • Cisco UBR10-MC5X20U MTBF: 40,256 hours

Cisco UBR-MC20X20V cable interface line card

  • UBR-MC20X20V-20D=
  • UBR-MC20X20V-5D=
  • UBR-MC20X20V-0D=
  • Power consumption: 250W 1 (853 BTU/hr 2 )
  • Weight:16 lb (7.26 kg)
  • Width: 1.36 in (3.45 cm)
    Height: 20 in. (50.80 cm)
    Depth: 16 in. (40.64 cm)
  • MTBF: Supports 5 9s availability

Cisco uBR-MC3GX60V cable interface line card

  • UBR-MC3GX60V=
  • Power consumption: 246W (839 BTU/hr)
  • Weight:11.6 lb (5.26 kg)
  • Width: 1.38 in (3.50 cm)
    Height: 21.5 in. (54.61 cm)
    Depth: 17 in. (43.18 cm)
  • MTBF: Supports 5 9s availability

Cable kit (3m MCX to F cables)

Cable kit with pre configured cables

Cable extraction tool

Universal cable holder

MCX connector strip tool

F connector strip tool

MCX connector crimper tool

F connector crimper tool

MCX fixed pin connector

F connector

MCX connector to F connector adapter

75–ohm precision miniature video cable

Shrink tubing

  • PN-74-2984-01, White Sands Engineering (or Asheridge Communications Limited)5
  • PN-74-2984-01-DNS, White Sands Engineering (or Asheridge Communications Limited)
  • RTOOLWSE, White Sands Engineering (or Asheridge Communications Limited)
  • PN–133-8447-026, Johnson Components6
    PN-29-4442-02, White Sands Engineering (or Asheridge Communications Limited)
  • PN-CPT-7538-125, White Sands Engineering (or Asheridge Communications Limited)
  • PN-CPT-753, White Sands Engineering (or Asheridge Communications Limited)
  • PN-C47-10120, White Sands Engineering (or Asheridge Communications Limited)
  • PN-ACT-270, White Sands Engineering (or Asheridge Communications Limited)
  • PN-MCXFP, White Sands Engineering (or Asheridge Communications Limited)
  • PN-ASFP, White Sands Engineering (or Asheridge Communications Limited)
  • PN-53140137, White Sands Engineering (or Asheridge Communications Limited)
  • PN–YR46940/WS940, Belden7, single strand bonded foil 1855A type
  • Size:1/4 inch
    Shrink ratio:2:1
    Recovered wall thickness: 0.025 inch
    Inside diameter after recovery: 0.125 inch

4.W = Watts

5.Whitesands Engineering at the following URL: http://www.whitesandsengineering.com/ (Asheridge Communications Limited is the European and Middle Eastern partner for White Sands Engineering and their URL is http://www.ashcatv.com)

6.Johnson Components at the following URL: http://www.johnsoncomponents.com/

7.Belden Electronics division at the following URL: http://www.belden.com/

SIP and SPA

Table A-3 lists the SPAs used with the Cisco uBR10012 router.

Table A-3 SPA used with the Cisco uBR10012 router

Description
Specifications

Cisco Wideband SPA

  • Part Number: SPA-24XDS-SFP
  • Per port Bandwidth: 1 Gbps
  • Number of ports: 1+1 redundant
  • Total Bandwidth: 1 Gbps
  • Power consumption: 20
  • MTBF: 500,000 hours

SFP Modules

  • GLC-SX-MM
  • GLC-LH-SM
  • GLC-ZX-SM

1-Port 10-Gigabit Ethernet SPA

  • Part Number: SPA-1X10GE-L-V2
  • Per port Bandwidth: 10 Gbps
  • Number of ports: 1
  • Total Bandwidth: 10 Gbps
  • Power consumption: 25
  • MTBF: 411, 892 hours

SFP Modules

  • XFP-10GLR-OC192SR
  • XFP-10GER-OC192IR
  • XFP-10GZR LR-2
  • XFP-10G-MM-SR
  • DWDM-XFP-xx.xx

5-Port Gigabit Ethernet SPA

  • Part Number: SPA-5X1GE-V2
  • Per port Bandwidth: 1 Gbps
  • Number of ports: 5
  • Total Bandwidth: 1 Gbps
  • Power consumption: 18.1
  • MTBF: 674,351 hours

SFP Modules

  • SFP-GE-T
  • SFP-GE-S
  • SFP-GE-L
  • SFP-GE-Z

Table A-4 lists the SIPs used with the Cisco uBR10012 router

Table A-4 SIP used with the Cisco uBR10012 router

Description
Specification

Cisco Wideband SIP

  • Part Number: UBR10-2XDS-SIP
  • Power consumption: 115
  • Weight: 10 lb (4.54 kg)
  • MTBF: 380,625 hours

Cisco SIP-600

  • Part Number: 10000-SIP-600
  • Power consumption: 160 2
  • Weight: 10 lb (4.6 kg)
  • Height: 16 inches (41.5 cm)

Width: 2.44 inches (6.32 cm)

Depth: 10.4 inches (27 cm)

  • MTBF: 280, 449 hours