Monitoring the Interface Card in the Cisco cBR Chassis

Monitoring the Interface Line Cards in the Cisco cBR Chassis using LEDs

Table 1. Verifying the LEDs on the Interface Line Cards
LED	Status	Description
STATUS	Off	The line card has not initialized correctly.
	Yellow	The line card has initialized, but HA fault is detected. Possible hardware fault.
	Green	The line card is operational.
PROTECT	Off	The Interface line card is not a Protect card.
	Blue	The Interface line card is configured as a Protect card.
	Green	The Protect card is operational and traffic is flowing.
REPLACE	Off	The Interface line card is operational and does not require replacement.
REPLACE	White	The Interface line card requires replacement.

Table 2. Verifying the LEDs on the Cisco DPIC
LED	Status	Description
STATUS	Off	The card is not powered up.
STATUS	On	The card is operational.
10GE Link Status	Off	The specific link is down or the optical module is absent.
10GE Link Status	On	The specific link is up.
REPLACE	Off	The card is operational and does not require replacement.
REPLACE	On	The card requires replacement.